I've purchased a modem (model ZTE MF100). It work very well on ubuntu. But i want to know, which application that allow to send sms via this modem model?
Actually I have USB HSPDA wireless modem and They have given a software to Connect Internet, Send & receive SMS.. But Is there a way to send and receive sms without installing the software .. ??
Ist column shows different customers( like N customers are there) , they require different bandwidht links based on some resolution time will be generated and we have to fix this line with in this resolution time , if not before 1 hr for each customer , this has to genetate some alarm and send the SMS to the particular mobile numbers.everythig is there in the GUI like customer , how much BW they want and what is the time duration , only thing we have to do is ,, linking with the GUi and writing some code to send the generated alarms to the mobile numbers specified.
Is there a way to make phone calls and send SMS via mobile broadband 3G modem, i mean an application for the 3G modem which is similar to the one provided for windows by the manufacturer?
Totally lost with this one as I know nothing about PCI modems.
Conexant modem I have loaded the HSF modem driver from www.linuxant.com Installed efax and efax-gtk When I try to send a fax I get; efax-0.9a: 14:38:38 opened /dev/ttyS0 efax-0.9a: 14:38:44 sync: dropping DTR efax-0.9a: 14:38:48 sync: sending escapes
I have USB modem huawei1550 and it work nice but I have one problem that I cant send or Receive messages because my pc dont recognize my usb as usb modem.
I have a ZTE MF112 mobile broadband modem, which comes with Windows drivers and software. This software allows not only connect to Internet, but also send SMS and place calls (as in you dial number in program and when you're connected, sound goes through the sound card). As far as I know, almost any USB mobile modem comes with application to send SMS via its GSM connection.Now the question is - is there any vendor-independent software that runs under Linux and allows you to use your mobile broadband modem to turn your PC into larger mobile phone? I want at least to be able to send and receive SMS using PC + mobile modem.
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code: Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7 Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
Im trying to set up my 3G modem to recive and send sms but I had no luck so far
Code:
Bus 002 Device 010: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636Im I tried with gnokii and wammu and many other things and did not want anything to do
I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
I'm try to create a mobile broadband connection using my Huawei E 1550 medem. but in Network manager there is not way to select my modem in the first step ( device selection step ) the drop down menu is locked. what to do ? how to configure my modem with ubuntu ?
I have this USB modem P300U(SIM600 chip based) which works fine under wind@ws because it has it's own driver, but the clever seller told me that it worked under Linux as well. It was with Redhat 8 but I couldn't get redhat 8 to download. And until now absolutely false.
I have Debian with Kernel 2.6.32-5-686 I just want to send sms through this modem. It's not recognized as modem I'm frustrated because it's not useful for me if it doesn't work on Linux I looked for info but I can't make it work. What I get in my debian is:
lsusb: Bus 002 Device 003: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device
dmesg: 9857.011649] usb 2-1: new full speed USB device using uhci_hcd and address 3 [ 9857.818942] usb 2-1: New USB device found, idVendor=10c4, idProduct=ea60 [ 9857.818989] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
I'm writing a script that will send an alert email given certain conditions. I have the impression that sendmail is what I need to do that. I just don't know how to use sendmail at all. I assume I have to set it up like a typical mail client so that it has a mail server to log into to send from.
I've looked through the man pages, but I can't find anything in plain English there on how to set it up, or how to use it once it is set up.
" > logfile.txt : gives an error extra character after the "
2- logsave logfile.txt 'send "show command;
" ': error invalid command
3- i simply tried to send the output of the whole script to file logsave /home/logfile ./script : seems that logsave work under root only
4- ./script > logfile : the problem with this is that the output of echo or (read "enter your id") command will not be displayed on the screen (actually nothing will be displayed, i have to open the log file to see the output). is there any way to save the log of the "send" ? or to save the log of the complete script without hiding the output on the screen?
I have a Centos 5.4 server running kernel 2.6.18-164.11.1.el5PAE. It has an internal modem, and I need to be able to issue AT commands from a script to the modem. I need to simply dial a number and hang up. The relevant piece of my script is:
[Code]...
With an external modem, this works no problem. With an INTERNAL modem, the call never goes out. I fired up minicom to make sure the modem was working correctly, and if I issue those AT commands from within minicom, everything works great.
While minicom was running, I noticed a peculiar fact: WHILE minicom is running, the script works from the command line, and I can see all the AT commands and OK's in minicom, (minicom acts as a monitor). When I exit minicom, the script stops working. It appears minicom is creating a bridge between the com port and the modem itself. So, what is minicom doing that I'm unaware of?
The server's sole function is to run asterisk as a voicemail server (avaya wanted well into 6 figure territory to implement this....). This script is to dial an avaya FAC to turn the voicemail message lights on and off on the end users' phones.
I have installed the KDE spin and am liking it so far. Except for the fact that I cannot get onto the internet. I rely on this ZTE USB wireless modem for internet and that just would not get recognized in Fedora. Plus, my Windows installation is down and I would love to keep it that way if at all possible.
I have followed a few instructions on this particular problem. I have modified the menu.lst file to account for the usbmodserial and product. The usb_modeswitch program has also been installed and the usb_modeswitch.conf file has been edited with the values I got from the 'lsusb' command's output.
But the curious thing is that when I actually execute the usb_modeswitch command, I get a message saying that there are no drivers for the ZTE device. Which means that I cannot go onto the wvdialconf part of it at all. Basically at this point I dont have a modem, according to Fedora. But it does get recognized as a ZTE device. That tells me that there is something right about what I have done so far and may only need to do a few tweaks here and there.
PS - I am based out of India and this is a Tata Indicom Photon (NOT Photon Plus) connection for which I have a USB device which acts as a modem.
i have modem HSPDA ( prolink PHS 100) but i don't know how to use in linux. I already to set password,user name and etc. in wvdial. but it still can't to connect to internet.
When I use Ubuntu, my DSL modem correctly gets the hostname I call my computer "mertensia", but I'm having issues with Fedora. Yet, when I look at the name assigned by the modem (using URL... in a web browser),I need the PC Name to be mertensia, because otherwise it will complicate how I ssh immensely.
I have a dual boot Win XP and Ubuntu 8.04. I use my phone Nokia 7210 Supernova as a USB modem on XP using NokiaPC Suite. I don't know how to do this in Ubuntu.
I'm using an external Huawei CDMA fixed wireless terminal (phone + dial-up modem). It connects to my PC via a USB port. Actually my PC recognizes it (after driver installation) as "TIUMP Serial Port". I guess the driver is a kind of USB adapter for a serial port.
I can't get it to work in ubuntu 9.10. I ran wvdial (after installing dependencies and wvdial package) and it doesn't recognize my device as a modem. Is there any solution to this problem? Without solving it, I won't be able to go online from ubuntu.
I'm running Ubuntu 9.10 (Kubuntu) and have a LG Arena (KM900) smartphone which when plugged into the USB socket and I select the iSync option on the phone, the handset is correctly identified as a Mobile Broadband device in Ubuntu network manager. However, I'm having difficulty getting Ubuntu to connect to T-Mobile through the 3G modem. I've referenced [URL] and[URL] and I can not connect. I'm assuming that this is something to do with Mobile Broadband settings I'm using:
APN: general.t-mobile.uk Username: user Password: pass
I have a WiFi modem. Its Chinese(non-brand) modem. I can use this modem in windows Xp easily. Just need to install a software given with this modem. but cann't use it in Linux as using ubuntu 9.10 below is my lsusb report.
Quote:
ubuntu@ubuntu:~$ lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
I moved from Debian to Ubuntu a few months ago, with everything working fine, except my 3G modem (which worked with wvdial and umtsmon in Debian).
The packaging claims that it is a Huawei E160, but lsusb says different: E220 (12d1:1003).
I've followed various instructions from these forums and the wiki, and it seems to be being recognised as a modem (I can set up an O2 prepaid (UK) connection), but it refuses to connect.
