I recently bought a server running CentOS 5 (32-bit) and am looking to install a newsreader, preferably a command-line reader. I tried nget and Hellanzb but couldn't get either one to successfully compile.
View 8 RepliesI can only boot fedora and red hat on my pc, I like fedora but Im having acpi problems and need to upgrade BIOS, which should be done from windows I hear. So I deleted fedora partition and plan on re-installing after all this.I've used http://www.ultimatebootcd.com/Iboot loads up but than complains of not finding something with acpiI tried knoppix but i think i was suppose to extract before I burned Ill try again if suggestedany ideas on how to get windows up i've tried many windows disc to no success
View 10 Replies View RelatedIs there a way by which I can read RSS feeds from the terminal itself ? Something that would display the titles and a link to follow. Or maybe a software which works from within the terminal.
View 2 Replies View RelatedKernel 2.6.21.5, Slackware 12.0 A command line html reader, or a conversion tool from html to text is what I would like to know if any of you guys knows. It has not to do a perfect job. And it would be nice if it is a native unix/linux program.
View 5 Replies View RelatedSo, in finishing my nFlux slack current edition.I have set it up for users to do certain things in console
and one of the things I want is a way to view slackbook-2.0 in runlevel 3 console.I cant find a pdf reader that works in command line mode and I cant figure out how to either convert slackbook 2.0 pdf into html/text Or find a slackbook download that is html or text?I tried converting it using pdftotext, which didnt work very well So, I need a command line pdf viewer or a converter that works good?
Anyone know why my fresh installation of centOS server is so slow? Seems like it takes over a minute to execute a command, im not doing anything complicated either. Secondly, how come at times when I type reboot the machine starts to beep, one long loud annoying beep.
View 5 Replies View RelatedI've installed Centos 5.0 in my system, and I want to know how to un-install an update or package in Centos via Command Line ?
View 1 Replies View RelatedOn my opensuse 11.4 box (although I assume the version is irrelevant), I'm trying to figure out how to do something with the mail command. We have multiple smtp relay servers and sometimes I have to test to verify that mail is bouncing off of them successfully. On my laptop, in my main.cf file for postfix, I've got the relay server listed. But to test multiple servers, I have to change the main.cf, restart postfix, send message, and then repeat for each test.
I'm trying to figure out a way to specify the smtp relay on the command line. I've been playing with the -S option which is supposed to allow variables and one of the variables in the man page is 'smtp'. I've tried several different syntaxes but nothing seems to work.
The closest I've come is:
mail -S smtp 10.1.0.63 -s "test" user@email.com < main.cf
That syntax doesn't give me an error but it still routes the message off the smtp server listed in main.cf which is not 10.1.0.63.
How to install software on centos from command line?
View 8 Replies View RelatedI'm using CentOS 5.4 x86_64 on my Dell Inspiron 1440. Is there any way I can get information about the battery(charge) through command line without X server.
View 1 Replies View RelatedI'm using several 3rd party repos for Centos - RPMforge, ATrpms, EPEL, REMI. Is there some way I can set the priorities for these repos in a bash script, using a YUM command? I cannot find anything in the YUM man page, or the yum-utils package.
Smart PM has a command to set channel priorities from the command line. Wondered if I can do the same for YUM repos?
Just got the new Dual Quad Server and after the installation was completed, It was the destkop edition... Can I get a reference on how to install the "Command Line Only" version of CentOS, OR Can I run the desktop edition and still be able to host VPS's and Web Servers, etc...
View 3 Replies View RelatedAs I recent convert from Ubuntu to Centos, I have a lot to learn. In Ubuntu, I can plug in a memory stick, run the menu option: System/Adminstration/Partition Manager, highlight the memory stick and choose "Format: Encrypt"
In Centos, my memory stick is /dev/sdc1, how do I, using command line: format it as /ext3, encrypt it using cryptsetup, and set a password?
It's a new install on a laptop, it looks like it installs fine, however after a boot I get login & password prompt and command line. I did choose GNOME desktop during the install.I know I will have problems to get 1080p resolution with my Intel integrated card Ironlake but at least I expect to have GNOME with min resolution 800x600.
View 5 Replies View Relatedi've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies View RelatedI'm from a Solaris (printer.conf) background and having trouble setting up a printer on the network. My CentOS box does not have a GUI interface available. I have been playing with lpadmin trying to add a printer - which it did, but everything is disabled, and the "enable" command is not found on my machine.
How do I make a simple printer on my network talk to my centOS box?
Here's the printer.conf from a Solaris machine that works:
raphael:
:bsdaddr=igppps1,raphael,Solaris:
And the printers.conf from the CentOS box:
lumina# more printers.conf
# Printer configuration file for CUPS v1.2.4
[Code].....
when i show status ricci on centos5.3x86_64 #service ricci status pidof: invalid options on command line pidof: invalid options on command line p is stopped how can i fix that bug ?
View 4 Replies View RelatedI work at The University of Alabama as a sysadmin on various HPC resources and also provide support for faculty using Unix systems. I've run into one problem that is affecting two different desktop systems running CentOS 5.3.oth of these systems have the latest updates. These machines have standard network-attached printers. One is an HP LaserJet 3250 and the other is a model that is pretty close to that one.Previously these users were able to print from graphical applications such as Firefox, but now when the print dialog is opened on ANY graphical application, it causes a hard freeze on that particular app.Printing from the commandline via `lpr` gives no issues and test pages from the Printer Admin interface also succeed.This problem has me stumped, so I'm looking for any insight as to what could have changed. I do not know what changed between the time when the printers worked graphically and when they stopped, but the users assure that they have changed no settings. The only thing I can suspect is a rogue update since this is affecting separate users on separate machines with separate printers.
View 4 Replies View Relatedi have a server running on centos5, i have run vsftp and samba, and i need create a user through command line and set your default directory, i can do this through graphic interface, but i need do throug line command.
View 12 Replies View RelatedWhere exactly are the temporary files stored, in /tmp or /var/tmp. How can i remove temporary files through command line? What is the difference between these two directories?
View 2 Replies View RelatedI have just installed the 32bit and 64bit versions of CentOS 5.5 and was wondering how I can add these machines to Active Directory for authentication. I've done this in the past with CentOS 5.4 using the GUI and everything worked just fine but now need to do everything from the command line.
View 1 Replies View RelatedI have installed CentOS 5.5 with no GUI - how do I enable/setup the "mail" client command to be able to send email via my Exchange 2007 mail server on my LAN?
View 1 Replies View RelatedI am having trouble trying to get the kernel to accept some command line arguments for parport_pc during bootup. I have a custom base board with a PC-104 CPU board connected to it through the ISA bus. On the base board I have 3 parallel ports mapped to addresses, 0x150, 0x158, and 0x160. Only the first one needs interrupts, the second two do not. So, on bootup I load the parport_pc module like this modprobe parport_pc io=0x150,0x158,0x160 irq=3,none,none I have been running an older RedHat kernel, 2.6.11 for the past few years and this has been working flawlessly. I had the above modprobe call in /etc/rc.d/rc.local.
Now I am trying to set the system up to use CentOS 5.5, kernel 2.6.18-194.el5. What happens is, the module inserts OK, but the system never recognizes the ports. (i.e, they do not show up in /proc/ioports)
But, if I log into the system, then rmmod parport_pc, then re-modprobe it as above, it works just fine and now my ports are visible. This is an embedded system, expected to just come up and run, so kicking it into action by hand is not an option.
I have tried putting a parport_pc.modules file in /etc/sysconfig/modules so that it will be seen by rc.sysinit, (some site I found while googling said modprobes need to be done earlier than in rc.local),and again, the module gets inserted but the ports are not seen. I have also tried putting rediculously long pauses between each step of the modprobing of the parport stuff;
[Code]...
Is there any command which could help me to determine which host name (domain name) an IP is connecting to from the command line?
View 5 Replies View RelatedI've just tried to create my first own live-cd using the instructions here: [URL] With the minimal kickstart I get a weird problem though:
...
Installing: libselinux ##################### [ 81/114]
Installing: psmisc ##################### [ 82/114]
Installing: MAKEDEV ##################### [ 83/114]
[code]....
Notice that "chmod" and "touch" are part of the package coreutils which gets installed only after these commands are used. I'm seeing a similar problem with selinux being referenced before the libselinux package is installed. I can boot the resulting image but after the kernel boots it panics because it cannot find /dev/root which might or might not have something to do with the errors above.
I am making a simple Pandora.com alternative for myself and a few friends where the user can upload his/her songs and listen to them anywhere. My intent is to make a lightweight, simple player in HTML5 so all the user needs is a current Firefox or Chrome to use it. I have set it up so that all uploaded songs get converted to .ogg and added to a database but I also want some metadata (not sure if that is the correct term) for the songs to be stored in the database so the player can tell the user what song he/she is listening too. I know there are several GUI tools for managing the title/artist/album info for songs but I'm having trouble finding any good ones I can use from the command line. If the song has the information already in the file, I think I can use mplayer to retrieve the information but it would be really great if there was one that would look up the song information online.
View 1 Replies View RelatedIs there command line BitTorrent Client in Linux? A PHP / Python script would be nice too.
View 7 Replies View RelatedI have recently installed MySQL Server on my CentOS box.
CentOS 5 MySQL 5.0.45 (installed using 'yum install mysql-server') I can start the daemon without error by issueing the following command: service mysqld start
The problem is that I want to use a number of the command line options available to mysqld, such as --verbose and When I issue '/etc/init.d/mysqld --verbose --help' I get the following output:
[Code]...
I am trying to attach my server to 2 diferent networks, with fixed ip addresses,
eth0 = 192.168.0.2 255.255.255.0 with gateway 192.168.0.1. This is currently working, and I can ssh o the machine on this address
eth1 = 192.168.150.5 255.255.255.0 with gateway 192.168.150.1
When I try and start eth1 with ifconfig eth1 up, I get the error message "eth1: unknown interface: no such device"
I have configured eth1 using system-config-network-tui and /etc/sysconfig/networking/devices/ifcfg-eth1 looks correct
GATEWAY=192.168.150.1
TYPE=Ethernet
DEVICE=eth1
BOOTPROTO=none
[Code].....
I want to have a choice or more preferable pass shell as command line argument when I ssh to an linux account.i.e. If John logs in to account "zzz" on server "abc", by default definition of account "zzz" n server "abc" he get csh.But Sally desires that when she logs in to account "zzz" on server "abc", she needs the login shell to be ksh,and Rick wants bash when he logs in to account "zzz" on server "abc".What is the most non-intrusive / easiest way to achieve this? Each user can set their preference on ssh command line or create a simple alias by each shell, but not sure how to do this.
View 6 Replies View Related