Software :: Get Rid Of Grub, From Grub Command Line Preferably?
Mar 10, 2011
I can only boot fedora and red hat on my pc, I like fedora but Im having acpi problems and need to upgrade BIOS, which should be done from windows I hear. So I deleted fedora partition and plan on re-installing after all this.I've used http://www.ultimatebootcd.com/Iboot loads up but than complains of not finding something with acpiI tried knoppix but i think i was suppose to extract before I burned Ill try again if suggestedany ideas on how to get windows up i've tried many windows disc to no success
View 10 Replies
ADVERTISEMENT
Nov 20, 2010
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies
View Related
Dec 1, 2010
Code:
grub-install -v
grub-install (GNU GRUB 0.97)
I loaded GRUB, and now when I reboot it goes straight into the 'grub>' command line. Initially GRUB had the root as (hd0,2), whereas the boot is on (hd0,1)...(hd0,2) is my '/home' partition, and (hd0,1) is my '/' partition... So on a bootup I ran...
Code:
root (hd0,1)
setup (hd0)
Now when I boot I still get the 'grub>' command line, but now the root is correct.
From 'grub>' I can type...
Code:
grub> configfile /boot/grub/menu.lst
GRUB will then show the menu, and I can click the listings to load them. All's fine, but why doesn't GRUB just load the menu.lst without my prompting? How can I automate this process of typing 'configfile /boot/grub/menu.lst' each time I boot?
View 1 Replies
View Related
Jun 2, 2010
Can I use the grub command line to reinstall grub from a ubuntu cd?
View 1 Replies
View Related
Dec 14, 2010
I recently bought a server running CentOS 5 (32-bit) and am looking to install a newsreader, preferably a command-line reader. I tried nget and Hellanzb but couldn't get either one to successfully compile.
View 8 Replies
View Related
Dec 18, 2009
with that said i burned fedora 8, 10, and 11 checked the sha1 verified everything was fine i had originally installed fedora 8 on an old pc i had from windows XP without any problems messed with it some, upgraded to 10 again no problems. tired to update 11 got a message about ext3 not found ext4 not found, re installed 10 the loader loads up now i have a blank screen with a cursor it the left hand corner
again i had 10 installed fine prior to all this can any one point me in the right direction to solve this issue or am i way over my head trying to figure this stuff out. i have spent 3 days searching these forums.
i'm just not quite sure what i need to do. oh, i tried to install 8 again and it wouldn't take either. i think the 10 problem has something to do with the graphic driver it's a geforce 7400 nvidia and something to do with the grub, but like i said i get a blinking cursor and not quite sure how to access the grub or command line.
View 3 Replies
View Related
Jan 20, 2010
I used the Wubi installer to install the latest version (available from the website) on my second physical HDD. I rebooted my machine and used the Windows 7 bootloader to launch Ubuntu and it launched a GUI install. I wasn't sure how long it was going to take, so I left for about a half hour and when I returned I was back to my Windows 7 logon screen. Naturally, I assumed the install was a success and I rebooted my machine. When I boot again I get the Windows bootloader and I see my options for Windows 7 (which works properly) or Ubuntu. However, if I select Ubuntu I am brought to a command-line and there is an output at the top of the screen stating "Grub bootloader." At this point do I need to type anything to launch the GUI (I'm assuming Gnome) from this? How should I proceed from this point, reinstall?
View 9 Replies
View Related
Jan 4, 2011
Does anyone know how to login through command line in grub.
View 14 Replies
View Related
May 27, 2011
When I turned on my laptop today, instead of showing me the boot menu..it show grub command line..ie
Code:
grub>_
I have no knowledge about grub command line..still i tried to boot into my fc14 ..using these steps given here
[Code]...
Thus boot configuration files have been lost..i think I have to install Fedora again
View 2 Replies
View Related
May 15, 2011
Running Ubuntu 10.10. My desktop environment is screwed up and won't let me use the keyboard or mouse at the login screen. How can force a command prompt during boot?
Here's a method:
Alt-SysRq-e - Requests kernel kill all processes except init.
View 2 Replies
View Related
Jan 9, 2010
i have successfuly installed ubuntu karmic inside my windows 7. After an update, i restarted it. but it didnt boot ubuntu. instead it shows grub's command line. what should i do? all of my java projects/programs is in there.
View 2 Replies
View Related
Mar 4, 2011
After installing the 10.10 Maverick Meerkat, I decided to have a new partition and install Windows 7 on it for development purposes. So this is the method I worked with:
Partitioned the hard disk with gparted
Formatted the drive in NTFS
Installed Windows
Booted into Ubuntu 10.10 Live CD and re-installed grub on the MBR Now after restarting the system a grub command line boots up. I was able to boot into ubuntu with the following commands:
Code:
find /vmlinuz
kernel /vmlinuz root=/dev/hda1 (or its equivalent)
initrd /initrd
boot
Is there any way how to load up the grub GUI with the options to boot up Ubuntu or Windows 7 respectively?
View 9 Replies
View Related
Jun 14, 2011
It used to be with (old) grub you could hit a function key and add a runlevel option to boot a console, but I don't know how to do this here, wanting not to edit the grub config file, as seems the only apparent option: I'm trying to boot into SimplyMepis where there is no rescue menu option, so need the prompt?
View 4 Replies
View Related
Mar 26, 2011
I am running Natty Alpha 3. I used Update Manager to install something (not sure what it was), then I restarted, but instead of listing all the kernels, it gave me a command line. I don't know what happened and how to use it.
View 6 Replies
View Related
May 2, 2015
I wanted to install Debian 8.0 on my second hdd in my UEFI machine, but when I choose UEFI boot from USB, GRUB command line appears, and I cannot boot up the setup. I used Rufus to create the bootable USB stick, using the amd64 kde CD image. I tried several images and I deleted the Linux and Efi partitions from previous installation of Ubuntu . Also I deleted GRUB from the Windows 7 Efi partition.
In the UEFI setup fast boot and secure boot are disabled, and I don't seem to have the option to boot in legacy mode, if I choose the simple USB boot option (without "UEFI" in front) I get "please insert correct boot media, and press any key or reboot". I couldn't manually boot from GRUB command line, because it is showing that all the drives are empty, and if I type "boot" I get "please load the kernel first".
View 2 Replies
View Related
Feb 14, 2010
I just booted into Linux and the Update Manager prompted me to restart. After the restart the GRUB interface I expect to see is no longer there and now it is just a command line that says press tab for more options.I have not got a clue with shell language as I have had no time to learn it as of yet. Do I need to uninstall and reinstall Linux or is there a command that can be typed that boots up the operating system.Even better is there something I can do that can return me to seeing the interface like I was used to.
View 3 Replies
View Related
May 16, 2010
I just installed Windows 7 and it erased my Grub bootloader. I followed this tutorial: URL...And now when my computer starts up it goes to the Grub prompt: Code: grub>I guess I did not do the right partition but I'm having a lot of trouble getting it back to how it was where my computer at least loaded the Windows 7 loader.
View 1 Replies
View Related
Sep 29, 2010
I recently updated, and now when I boot it only goes as far as grub command line. There is no grub menu. The computer is a Dell Inspiron 8600 laptop with only Ubuntu installed -- no dual boot, no weird partition schemes. Originally installed Ubuntu 09.04 on this computer, upgraded a couple times and it currently has (had) 10.04.1 LTS running. The update should have upgraded from kernel 2.6.32-23 to 2.6.32-24. I can boot with a live CD and mount the hard drive. The drive seems fine, so it appears to be simply a grub config issue. I have to boot with live cd to get online to check for potential solutions. So I'm taking some notes on how to use grub.
View 4 Replies
View Related
Jan 5, 2011
how to login through cmdline in grub.I tried some of codes but failed.codes were-grub>set root=(hd0, grub> linux /vmlinuz root=/dev/(sda, ro error;no such disk
View 6 Replies
View Related
May 18, 2011
The ability to manually boot using the Grub command-line constitutes a big security risk in Linux, IMO.Any OS can be booted in this manner from a PXE-LAN, USB, or CD/DVD drive, circumventing BIOS-imposed boot restrictions. (Once a foreign OS is booted, of course, it can be used to access any part of an unencrypted hard drive.) Placing passwords or locking menu items (in the Grub configuration files) does not prevent a user from booting manually using commands entered at the grub command-line.
As it stands now, when presented with the Grub menu (or after bringing up a hidden Grub menu with the "ESC" key), a user only needs to hit "c" to enter the Grub command-line mode to facilitate any type of bootup whatsoever. (They can then enter manually the Grub commands to boot an OS on any device.) This is extremely insecure and allows any passerby to boot the computer with a few keystrokes and a bootable USB drive. How do I configure Grub so that it will require a password in order to enter the command-line mode (and thereby restrict boot options to the menu, which can then be password protected/locked) ?
View 8 Replies
View Related
Dec 2, 2010
What is the command line to update grub in mandriva 2010
View 5 Replies
View Related
Feb 25, 2010
I do computer forensics here in Afghanistan and I am trying to keep a clean image of a dual bootable hard drive. Here is what I try to do...
1. Boot into UbuntuLiveCD
2. I run "sudo dd if=/dev/zero of=/dev/sda conv=sync,notrunc bs=64K" to wipe the drive with all zeros.
3. I then install Windows by creating a new partician about 50GB.
4. I then install Linux by creating a partician in ext4 mounting it at '/' in addition I create a swap partician.
5. Next configure everything just the way I want it. I install all the drivers and software I need for my windows partician and build out the remaining part of the disc as a "data drive."
6. Then I use "dd" again to try to image my "clean slate" of a system. Remember I am dual booting. I dd the /dev/sda and gzip it.
7. When I go to restore it, I boot from the live CD again and unzip ig and "dd" it back onto /dev/sda.
8. I run fdisk -l and I get:/dev/sda1 * 1 6375 5120000000 7 HPFS/NTFS/dev/sda2 6376 11724 42965842+ 83 Linux/dev/sda3 11725 12453 ...... 82 Linux swap / Solaris.This means to me that it can "understand the file system"
9. But then when I take out the Live boot CD and try to get my "clean slate" machine back, the system goes into Grub Rescue mode with a grub command line "grub rescue>"
10. I tried using the tutorial on Grub2, but...
a. It would not understand the command "linux"
b. When I try to do insmod, it says it doesn't recognize the file system.
View 4 Replies
View Related
Apr 29, 2011
I upgraded from Meerkat to Narwhal. After all the files have been downloaded and installed it rebooted. Once it rebooted it went straight to the GRUB command line. After couple of hours of research, I ended up at
[URL]
My root was at (hd0,1). So therefore I put this in at the GRUB prompt.
set root=(hd0,1)
linux /vmlinuz root=/dev/sda1 ro
initrd /initrd.img
boot
I did what it said and it got me into Ubuntu. Nice! It asked me to: After successfully booting into the system the user should run sudo update-grub I did. Next it asked me to review (/boot/grub/grub.cfg). That's where it is hairy, my file has multiple root settings and with msdos settings. That doesn't seem normal.
[Code]....
View 3 Replies
View Related
Jun 12, 2009
I'd like to say I'm very impressed with Fedora 11. I'm a long time Linux user and I've tried many distros. But, I usually keep only the best on my laptop. For a long time that was Ubuntu but, I think Fedora 11 has made some key improvements over Ubuntu and I'm eager to switch. The problem is: I haven't been able to run Fedora as anything other than on the Live CD. Everything works perfectly and it installs but, when I reboot, Grub begins. Instead of booting, however, Grub drops into its minimal shell and gives me a command line.
I've tried installing it a number of ways now and have read much about the problems with Ext4 on Grub and took special care to see that Grub has its own, separate, /boot ext3 partition. Even then, no luck. My hardware should work fine. I've got an HP DV-5 with 4GB RAM, AMD Turion 64-bit dual-core @ 2 Ghz, and an IDE 250GB hard drive. I'm working with the 64-bit Fedora 11 Live disc with KDE as the Gui.
View 10 Replies
View Related
Jan 1, 2010
My Wubi installation of Ubuntu (version 9.10, I think) that I recently installed was working fine at one point, but now it isn['t. I select Ubuntu instead of Windows from the Windows boot loader, but instead of getting the usual menu of different linux versions (I think 2, as I updated it at same point), and Windows, I get the GRUB command prompt instead.I've looked at th2e Wubi Guide (https://wiki.ubuntu.com/WubiGuide), and I've followed the instructions for "How can I access my Wubi install and repair my install if it won't boot?", but that reveals no problems.For the record, I'm fairly new to linux and ubuntu, but I'm good with computers generally. The main operating system on my computer is Windows Vista, but I'm currently typing this from a Live CD of Ubuntu 9.10. The virtual disk (root.disk), is currently mounted as vdisk, as indicated in the Wubi Guide.
Ideally I would like to get Ubuntu to load as it used to (with a menu). However, if there is a way to boot from the GRUB command line that would be good too. I'm not at all familiar with GRUB, and the commands I've tried (boot and linux, I think), get errors saying no kernel specified, or loaded, or something like that.
View 2 Replies
View Related
Nov 23, 2010
I have tried hours of followed fixes for my situation to no avail.I am stuck in grub line command and cannot get out.I have tried everything under the sun and nothing. every command comes back with disk read error, unrecognized command, etc.I am about ready to throw the mini 9 through the wall.
View 4 Replies
View Related
Feb 5, 2011
I've been dual-booting win7 and ubuntu on my comp for a while, but didn't bother updating grub. I just updated to grub 2, but it wouldn't let me boot and said my hard drive was missing, also giving me a grub safety command line.
View 3 Replies
View Related
May 28, 2011
I've recently had trouble reinstalling my Ubuntu system as I was getting various unusual errors as described in my old thread here. I thought it was probably something to do with my RAID-0 array which was pre-installed on my laptop from purchase being corrupted or something like that (if it's possible). I decided to simplify things for myself (not understanding RAID arrays much) so I just removed the RAID array and installed Windows and Ubuntu on the now separate hard disks. It worked fine.
I noticed quite a significant performance drop, however, with even Ubuntu boots taking longer than 30 seconds despite my laptop being both high-spec and only a few months old. Windows, as you can imagine, was dreadfully slow. I wasn't entirely convinced that this was entirely due to the loss of the RAID array - as even low-spec laptops with presumably no RAID arrays are supposed to boot Ubuntu in under 30 seconds apparently - but I read that RAID-0 arra
View 8 Replies
View Related
Nov 24, 2010
I created a new partition in Windows Vista which, after rebooting, screwed up Grub. I believe that I need to reinstall Grub and everything should be fine, and I remember reading the command to do this on this forum, but I can't find it. When I boot, I now get a black screen with white letters instead of the Grub boot menu. It says something about "Minimal Grub" at the top and gives me a prompt that looks like this.
grub>
I can boot the live CD and I have internet access with it, but I can not remember the terminal command to repair Grub. Can someone tell me this command?
View 7 Replies
View Related
Sep 2, 2009
A failed upgrade, from disk images, of Fedora 10 to 11 resulted in no GRUB bootloader main menu appearing on bootup (no WIN, no LINUX choices from which to boot). I am booted directly into the GRUB command shell...so, no WIN, no LINUX, nothing. And my understanding of GRUB shell commands is very low.I have 2 hard disks, WIN on the first, LINUX on the second. I believe GRUB Bootloader is on the first disk.Sadly, I have no external install media.An old grub.conf hardcopy indicates that root =/dev/sdb2, root (hd1,0), kernel /vmlinuz....olderversion...(relative to /boot),initrd /initrd...olderversion... (relative to boot). and WINDOWS on (hd0,1), with chainloader +1
I need to somehow get past this grub shell, and re-install/re-instate the grub bootloader, so it can boot normally.What grub command(s) must I use? I've played around with the commands, but with no success.I worry that if I can't resolve this, the whole machine may be useless.
View 9 Replies
View Related
