CentOS 5 Server :: Mysqld Won't Accept Command Line Arguments?
Mar 28, 2009
I have recently installed MySQL Server on my CentOS box.
CentOS 5 MySQL 5.0.45 (installed using 'yum install mysql-server') I can start the daemon without error by issueing the following command: service mysqld start
The problem is that I want to use a number of the command line options available to mysqld, such as --verbose and When I issue '/etc/init.d/mysqld --verbose --help' I get the following output:
[Code]...
View 1 Replies
ADVERTISEMENT
May 9, 2011
I am having trouble trying to get the kernel to accept some command line arguments for parport_pc during bootup. I have a custom base board with a PC-104 CPU board connected to it through the ISA bus. On the base board I have 3 parallel ports mapped to addresses, 0x150, 0x158, and 0x160. Only the first one needs interrupts, the second two do not. So, on bootup I load the parport_pc module like this modprobe parport_pc io=0x150,0x158,0x160 irq=3,none,none I have been running an older RedHat kernel, 2.6.11 for the past few years and this has been working flawlessly. I had the above modprobe call in /etc/rc.d/rc.local.
Now I am trying to set the system up to use CentOS 5.5, kernel 2.6.18-194.el5. What happens is, the module inserts OK, but the system never recognizes the ports. (i.e, they do not show up in /proc/ioports)
But, if I log into the system, then rmmod parport_pc, then re-modprobe it as above, it works just fine and now my ports are visible. This is an embedded system, expected to just come up and run, so kicking it into action by hand is not an option.
I have tried putting a parport_pc.modules file in /etc/sysconfig/modules so that it will be seen by rc.sysinit, (some site I found while googling said modprobes need to be done earlier than in rc.local),and again, the module gets inserted but the ports are not seen. I have also tried putting rediculously long pauses between each step of the modprobing of the parport stuff;
[Code]...
View 7 Replies
View Related
Dec 27, 2010
Can anyone tell me what command can be used so that the Linux Centos Server starts mysqld, httpd and ftpd services at boot time automatically?
View 2 Replies
View Related
Oct 11, 2010
i was wondering if someone could help me figure out a script for global variables i'm trying to set for a group of command line arguments:
basically i'm trying to set: if $# = 3 then i want to search for each all string $1 $2 $3
if $# = 4
then i want to search for each all string $1 $2 $3 $4
View 2 Replies
View Related
Feb 1, 2010
I want to know how to get eg. the contents of a form on a webpage which has been passed to a server side PHP script, inside for example an array which I can read. I've been reading a ebook on PHP which as far as I can see doesn't cover this inside it.
View 1 Replies
View Related
Apr 2, 2011
how to pass an array as a command line argument in a shell script?
View 5 Replies
View Related
Jul 13, 2009
how to use QGLviewer. I want to give my program a file name as a command line argument. All of the sample programs I find have a main.cpp file like this:
Quote:
#include <QApplication>
#include "window.h"
int main(int argc, char *argv[])
[code]....
Then the Window class, which is derived from QGLViewer, does all the program's actual work. If I want access to argc and argv, for example, to open and read a file that's passed as an argument, what would handle that? Is there a built-in way to get the arg variables to the window class, or do I need to just write a loadfile function and pass them?
View 1 Replies
View Related
Aug 5, 2010
Has anyone used rtmpdump or flvstreamer? They compile well (there is also a package on Packman for rtmpdump, but not for the latest version) and have man pages listing a bunch of command line arguments, but I have not yet figured out how to use them in connection with browser and flash plugin.
View 1 Replies
View Related
Jul 14, 2010
I've written myself a linux program "program" that does something with a regular expression. I want to call the program in the bash shell and pass that regular expression as a command line argument to the program(there are also other command line arguments). A typical regular expression looks like "[abc]_[x|y]".Unfortunately the characters [, ], and | are special characters in bash. Thus, calling "program [abc]_[x|y] anotheragument" doesn't work. Is there a way to pass the expression by using some sort of escape characters or quotation marks etc.?
(Calling program "[abc]_[x|y] anotheragument" isn't working either, because it interprets the two arguments as one.)
View 7 Replies
View Related
Jun 24, 2011
I've written myself a linux program "program" that does something with a regular expression. I want to call the program in the bash shell and pass that regular expression as a command line argument to the program (there are also other command line arguments). A typical regular expression looks like "[abc]_[x|y]". Unfortunately the characters [, ], and | are special characters in bash. Thus, calling "program [abc]_[x|y] anotheragument" doesn't work. Is there a way to pass the expression by using some sort of escape characters or quotation marks etc.? (Calling program "[abc]_[x|y] anotheragument" isn't working either, because it interprets the two arguments as one.)
View 8 Replies
View Related
Aug 23, 2010
I am able to start up firefox just fine out of my terminal, but i have not been able to find any list of arguments that can be added in the command line. what i'm looking for is that it starts up in Full Screen mode right off. is there an argument that can be added to ti to do that?
View 2 Replies
View Related
Dec 9, 2010
I'm having problems with bash quoting. Maybe someone can tell me what's going on.. Basically, I need to create a command line inside a bash script that contains arguments that contain spaces and bash variables that need to be expanded.
[Code]...
View 5 Replies
View Related
Apr 18, 2011
i have successfully installed mysql server but when i am try to create database, it shows error like this
ERROR 2002 (HY000): Can't connect to local MySql server through socket '/var/run/mysqld/mysqld.sock' (2)
** mysqld is not available in /var/run and error log file is also not available in /var/log **
View 4 Replies
View Related
Feb 10, 2011
how to run a shell script taking command line arguments in a jsp page.
View 1 Replies
View Related
Dec 14, 2010
How can i write a shell script that takes a file path as command-line arguments.and it should report whether the path denotes a file or a directory.
View 2 Replies
View Related
Feb 20, 2010
Write a script that will take a list of filenames as arguments and output a count of how many of them are regular files, and how many of them are scripts (if the file is executable, it will be assumed to be a script file)
Counts always come back as 0
View 5 Replies
View Related
Jun 8, 2010
I have an old PC (130mb RAM, 6gb hard drive).
I installed a command-line version of Ubuntu 10.04 using the Alternate CD. The machine was wiped, and I used most of the default settings.
I used a thirteen character user id which consisted of mixed case letters and numbers, and an eighteen character password that contains mixed case letters and numbers and a # sign.
When I rebooted, the command-line login would not accept my password. I assumed I had somehow made a mistake, and just wiped the machine again and reinstalled. This time I was very careful with the user name/pw.
Again, the command-line login did not accept my password!
On a hunch, I took an old Ubuntu 7.10 Alternate CD and erased the machine again. I installed a command-line version of Ubuntu. AGAIN --- it will not accept my password even though I'm 100% sure it is correct.
View 2 Replies
View Related
Apr 10, 2010
After the upgrade from 8.10 to 9.04, all was well. But after the upgrade from 9.04 to 9.10, I lost the MySQL server. Now, I recall during the upgrade, I was asked if I wanted to keep the existing my.cnf file or replace it with a newer one. I did as suggested and kept the original as I had edited it before. The same question was asked with a couple other config files. I kept the original in each case. After the first step, I checked the server was running and the websites were up, all was well. After the update to 9.10, when I checked the server, I get the following error:
Code: error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! Can anyone point me in the right direction to getting this resolved?
View 2 Replies
View Related
Feb 24, 2011
I need some help.Trying to set up bugzilla on my VM.After setting up the IP to use static i could log on to the url its not even loading up from command line its issueing an error.when i try to log on to mysql
bugzilla:~# mysql -u root mysql] ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
View 1 Replies
View Related
Feb 27, 2011
I'm the lead Dev of GnackTrack and we're having issues with running MySQL on the LiveDVD.Once installed everything works fine, mysql can be connected to but when using the liveDVD we get the following error:
Code:
root@root:~# mysql
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Contents of /etc/mysql/my.cf point to /var/run/mysqld/mysqld.sock but because this is a liveDVD the actual file is located in:
/rofs/var/run/mysqld/mysqld.sock
[code].....
View 4 Replies
View Related
Apr 2, 2009
I've installed the CentOS 5.1 from a CD only yesterday and everything is working fine except Mysql that came from the CD distribution. I have detected that my system has mysql.
[root@onion /]# rpm -qa |grep mysql
mysql-5.0.22-2.1.0.1
[root@onion /]# find . -name mysql
./usr/bin/mysql
./usr/share/mysql
./usr/lib/mysql
However I'm unable to find mysqld, safe_mysqld or mysql_install_db in my filesysytem.
[Code]...
View 3 Replies
View Related
Jul 14, 2010
Anyone know why my fresh installation of centOS server is so slow? Seems like it takes over a minute to execute a command, im not doing anything complicated either. Secondly, how come at times when I type reboot the machine starts to beep, one long loud annoying beep.
View 5 Replies
View Related
Mar 29, 2009
I was using Red Hat 7.3 forever and decided it was time for a change. I went to Fedora 10 but it was really buggy. CentOS 5.2 is VERY stable.Here is my problem.The server is command line only -- I tend to hate GUI"S.I setup Samba no problem disabling the ports needed through the firewall and that was straightforward.CUPS is a nightmare for me since CentOS locks down the cupsd.conf and then the firewall does its thing. I allowed port 631 through the firewall but then got lost on the cupsd.conf. It's been too long and the old redhat one won't work with CentOS (not surprising since it's a VERY old system) straight-forward CUPS tutorial for a command line interface. I just need it to be:
a) do this
b) do that
View 4 Replies
View Related
Feb 24, 2009
I'm from a Solaris (printer.conf) background and having trouble setting up a printer on the network. My CentOS box does not have a GUI interface available. I have been playing with lpadmin trying to add a printer - which it did, but everything is disabled, and the "enable" command is not found on my machine.
How do I make a simple printer on my network talk to my centOS box?
Here's the printer.conf from a Solaris machine that works:
raphael:
:bsdaddr=igppps1,raphael,Solaris:
And the printers.conf from the CentOS box:
lumina# more printers.conf
# Printer configuration file for CUPS v1.2.4
[Code].....
View 10 Replies
View Related
Dec 16, 2009
i have a server running on centos5, i have run vsftp and samba, and i need create a user through command line and set your default directory, i can do this through graphic interface, but i need do throug line command.
View 12 Replies
View Related
Sep 10, 2010
Is there a way to retrieve the arguments in one big string, rather than split into a "char*[]" in C/C++?
It would be nice to get this: "appname --option=value argument argument", rather than "appname", "--option=value", "argument", "argument", etc...
Simply concocting the strings together will not do, since I would like to get the arguments before any OS interaction (i.e.,
Code:
appname --option="hello"
translates into
Code:
appname --option=hello
(quotes are lost). Here is the output of just such a problem:
[Code]....
View 1 Replies
View Related
Apr 30, 2009
We have been struggling with a problem with the mysql-server package. This might be in the wrong category because our problems are with it on x86_64. Where the problem happens variables that should populate from the my.cnf don't, on other servers, they do, the my.cnf files are identical except for the server-id
The problem occurs on some of our machines but not others. All are using the mysql-server-5.0.45-7.el5.x86_64 The ones that work, when you connect with a client respond with server version 5.0.45-log source distribution The ones that don't work respond with 5.0.45 source distribution
It's unclear what the differences are between the two source versions and how we wind up with two different versions. One thing that might be involved, the mysql package is installed with both the i386 and x86_64
View 1 Replies
View Related
May 6, 2011
Howto show all services running/installed in the command line under Centos 5.6 Server?
View 6 Replies
View Related
Apr 18, 2011
installing mysql server manually. i have successfully installed mysql server but when i am try to create database, it shows error like this
ERROR 2002 (HY000): Can't connect to local MySql server through socket '/var/run/mysqld/mysqld.sock' (2)
** mysqld is not available in /var/run and error log file is also not available in /var/log **
View 5 Replies
View Related
Mar 26, 2010
How to install software on centos from command line?
View 8 Replies
View Related
