CentOS 5 Networking :: Unable To Start Eth1 From The Command Line?
May 28, 2009
I am trying to attach my server to 2 diferent networks, with fixed ip addresses,
eth0 = 192.168.0.2 255.255.255.0 with gateway 192.168.0.1. This is currently working, and I can ssh o the machine on this address
eth1 = 192.168.150.5 255.255.255.0 with gateway 192.168.150.1
When I try and start eth1 with ifconfig eth1 up, I get the error message "eth1: unknown interface: no such device"
I have configured eth1 using system-config-network-tui and /etc/sysconfig/networking/devices/ifcfg-eth1 looks correct
GATEWAY=192.168.150.1
TYPE=Ethernet
DEVICE=eth1
BOOTPROTO=none
[Code].....
View 2 Replies
ADVERTISEMENT
Mar 4, 2011
I need to setup two ethernets in my Centos box. OK no problem both ethernet and 1 virtual works perfect. eth0, eth1 and eth1:0. I'm trying to set up diferent routes for eth0 and eth1/eth1:0 I need eth0 has a 192.168.1.1 gateway and eth1/eth1:0 192.168.1.100 gateway.I think I've tried almost every thing but always get one gateway for all the eth.These are my config..
/sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 00:XX:XX:XX:XX:XX
inet addr:192.168.1.168 Bcast:192.168.1.255 Mask:255.255.255.0[code]......
View 7 Replies
View Related
Apr 2, 2011
Last night my system rebooted and dropped screen resolution to 800*600. I was unable to change that from no where. I tried to install nvidia driver and now no gui, only command line. Starting xorg by using 'startx' fails. How I can get back to normal with normal resolution?At the moment I am logged in via live cd. Let me know if any log files needed (if I can locate those).
View 9 Replies
View Related
Nov 5, 2009
I've got an install of CentOS 5.3 in a VM which was installed without X or Gnome.I've added X (yum groupinstall 'X Window System') and Gnome (yum groupinstall 'GNOME Desktop Environment) and can now run startx no problem.However on boot I get a command line login rather than the graphical login screen one normally gets if Gnome is included at install time.What do I need to do to get the graphical login after boot?
View 3 Replies
View Related
Aug 25, 2009
I am unable to start apache on my linux machine with following errors Starting httpd: Syntax error on line 117 of /etc/httpd/conf/httpd.conf: Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration I am using CentOS5 with apache version httpd-2.2.13
View 99 Replies
View Related
Oct 2, 2010
I'm attempting to install a command-line version of Maverick, from the alternate CD. I'm using the 64-bit version. The installation has gone fine - however, I'm having troubles getting the wireless to work. I've installed wireless-tools by carting the *.deb archive over from another computer - this seemed to go fine, and iwconfig shows my wireless card as "wlan0". However, even after setting the essid and the WEP key I can't connect to the internet (tested this using apt-get). I know that this wireless card requires the "rtl8187se" module, which automatically loads with the desktop version of Maverick - however, it isn't working on the command-line. Running "sudo modprobe rtl8187se" pings back an error message saying that the module can't be found. Is there a way for me to manually install it or "find" it?
View 1 Replies
View Related
May 2, 2011
I have static eth1 defined. When I boot or restart, the networking will not start automatically - i must do it from terminal by ifup eth1.
Where can I put this command to have it autostart?
View 5 Replies
View Related
Feb 27, 2011
I have a CentOS 5.5 server running currently with a Netgear gigabit ethernet card and for wifi I have a wi-fi card with the chipset: RT2860.Now I have gotten the ethernet card and wi-fi card working but my main question is: How do you bridge the connection between the ethernet card and the wi-fi card to create a wireless network with a hidden ESSID if possible and WPA encryption? (So the server basically acts as a wireless router as well as doing all the other stuff I need to do on it).
View 2 Replies
View Related
Jun 7, 2009
I want to install CentOS from netinstall CD, but it doesn't work for wireless connection, because it just looks up for eth0 connection. Well, I connected server to wired USB connection and it's named eth1. I want to use netinstall CD but using eth1 connection. Is there any way for doing it?
View 2 Replies
View Related
Jul 23, 2009
I have Centos 5 installed on a PC in the local network. I have installed the RPM dhcpv6-client-1.0.10-16.el5.i386.rpm on this PC to configure it as DHCP V6 client. The RPM was installed successfully, and I have done modifications to the following files:
1. /etc/sysconfig/network, set the networking to yes.
2. /etc/sysconfig/network-scripts/ifcfg-eth1 set the BOOTPROTO=DHCP.
Now the problem is when I start the client on this pc as dhclient, it throws the following errors, and logs out after some time. All the network configurations were lost and the PC gets disconnected from the network.
[root@ServerB]# dhclient
Internet Systems Consortium DHCP Client V3.0.5-RedHat
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
[Code]...
View 4 Replies
View Related
Jun 5, 2009
i have installed centos 5.1 but it won't recognize 2nd nic card (eth1). i was unable to install the driver supplied by the cd. i am using intellinet gigabite pci network card. the network card recognize by centos 5.3 but i need to use centos 5.1. i also tried another intel gigabite adopter but it also won't recognize by centos 5.1.
View 2 Replies
View Related
May 7, 2009
Centos 5.3 How can I change the primary nic from eth1 to eth0? My board has 2 nic's and I'm having license issues with cpanel
View 2 Replies
View Related
Sep 24, 2009
I have added a new network card on my Cent OS machine. This is a RTL-8139/8139C/8139C+ card. When the machine boots or I start the network it displays "eth1 does not seem to be present,delaying initialization."I have gone through different posts on the forum with similar problems and have posted output of some of the commandsOutput of lspci is
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
[code]....
View 8 Replies
View Related
Oct 18, 2010
I'm having a problem and despite I have googled a lot cant find the root cause. I have a server with two embedded NICs and centos 5.5 loaded. I need to have one NIC with a fix internal IP address to communicate with the intranet and a second NIC with a fix address from my telephone provider. I know I cant have two different gateways on the net so I configured only the gateway for the second NIC leaving the field empty for the first.
I found that the first NIC is handling all the traffic for both interfaces (eth0 and eth1) and the second NIC is in standby (or doing nothing). This is causing the traffic intended for the second NIC never reach their destination. After a couple days working with the BIOS and other configuration files I tried another way of solve the issue. I put a fix address for the first NIC and another fix address for the second NIC (both in the same subnet) and from a computer pinged successfully both addresses. However if I disconnect the cable for the first NIC both interfaces goes down (eth0 and eth1) and both pings fails. If I disconnect the cable for the second NIC (with the first one connected) both pings still running without any disturbance.
I worked also in a second server with different hardware (different kind of motherboard, different NIC manufacturer, etc.) but the problem is also present in this second server. I was reading about NIC bonding or teaming, but this configuration is not present in the modprobe.conf or in the ifcfg-eth0 files, so I believe the problem is not related with this feature. Do you know what is happening with the NICs and how can I get two really, fully independent NICs?
View 7 Replies
View Related
Nov 8, 2010
I have 2 network interface on 1 server and i got a problem finding a solution for it.I have 1 java application and i want it to use the eth1 for that application and not the default eth0. On eth0 i got for example xx.xxx.xx.22 and on eth1 i got xx.xxx.xx.23 and i want the java app to use the 23 ip one.
View 3 Replies
View Related
Nov 24, 2010
I have a Lan with 100 computers with microsoft windows xp and vista on it, and I need to build a CentOS Primary domain control- PDC. So I am building a PDC , with samba 3.x +Ldap ( Light Directory Acess Protocol), with static eth0 and DHCP-server( Dynamic Host Control Protocol) on eth1.
Eth0 : 192.168.1.3
Eth1 : 192.168.1.5
Here is the configurations files:
== BEGIN uname -rmi ==
2.6.18-194.17.4.el5 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
centos-release-5-5.el5.centos
== END rpm -q centos-release ==
== BEGIN cat /etc/redhat-release ==
CentOS release 5.5 (Final)
== END cat /etc/redhat-release ==
== BEGIN getenforce ==
Permissive
== END getenforce ==
== BEGIN rpm -q yum rpm python ==
yum-3.2.22-26.el5.centos
rpm-4.4.2.3-20.el5_5.1
python-2.4.3-27.el5
== END rpm -q yum rpm python ==
== BEGIN ifconfig -a == .....
View 3 Replies
View Related
May 4, 2011
I may need to handle a Red Hat server soon and thought that has the same command line.Where do I start if I wanted to learn the command line? Especially, how do you connect to a Redhat / Fedora Server using console on windows and do C programming
View 6 Replies
View Related
Jun 16, 2010
i'm using ubuntu with the GUIi have a .pps (power point presentation) on the desktop. I installed the powerpoint viewer and made it the default program for opening the file.when i double click on the file everything works.my problem is i need this on a schedule so i downloaded scheduled task.in scheduled task they ask me the command line i want to execute and that's where it doesn't work. I checked the "allow executing file as program" box on the file but i get the error cannot execute binary file.
View 1 Replies
View Related
Apr 14, 2011
Problem: Can't get bridging to work properly.
I'll start by saying that most of this is built inside of a 64bit ESXi 4.1.0 server. Should be obvious by the picture below.
Trying to set up a bridged CentOS box. Ultimate goal is to set up a Transparent Firewall. The machine labeled 'Desktop' is a Windows XP running DHCP. It gets assigned an Internet routeble IP address. At this point, nothing is running a firewall.
Symptoms:
Gateway can ping CentOS bridge
CentOS bridge can ping gateway
CentOS bridge can resolve DNS names and ping FQDNs on the Internet.
CentOS bridge CAN NOT ping Desktop
[Code]....
View 12 Replies
View Related
Feb 5, 2010
if is posible to start a VM from the command line?
[code]...
View 3 Replies
View Related
Aug 18, 2010
In Windows, if I have a console window open, type winmine, and press enter, Minesweeper will appear, completely separate from the cmd program. The Minesweeper instance is not tied to the command prompt in any way that I know of, with the exception of Minesweeper's parent being set to that instance of the command prompt. It's different in Linux, however.
In Linux, if I have a console window open, type emacs and press enter, Emacs will open, but it seems tied to the command line. Specifically, it appears that I can't use the command line anymore until that instance of Emacs is closed. Is there a way to replicate the Windows behavior in Linux?
View 11 Replies
View Related
Apr 23, 2010
Ubuntu 9.10 (Karmic Koala) 64 bitlaptop Asus f5n vidio: GeForce 7000MI try to remove piton2.6, but system freeze, after these ubuntu show massage (after reboot)"Ubuntu is running in low-grahics mode our screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself"I press "ok"and give me next list of options"run ubuntu in low-graphics mode for just one session" -- system freeze "regonfigure graphics" -- no resultI try to reinstall graphic driver "nvidia-glx-185" -- no result
View 3 Replies
View Related
Mar 15, 2009
Ethernet card works, but Wireless card activation fails at bootup time. It also fails if I try it again from the Network Configuration UI.
I have provided some output I got from initial exploration.
I upgraded to a recent version of the 2.6 kernel.
uname -a: Linux localhost.localdomain 2.6.28.7 #1 SMP Sat Mar 14 19:04:11 PDT 2009 i686 i686 i386 GNU/Linux
I have installed the correct firmware hopefully.
cd /lib/firmware ls
Output is:
I do have the bcm* files for firmware.
output of lspci is:
Last two lines show the that Wireless card BCM4312 is visible.
View 5 Replies
View Related
Jan 26, 2015
I'm trying to automate two command lines, a synclient and a syndaemon. They both work well if I type them manually in a terminal, but if I do a littre script to do this, tap to click and scrolling don't work anymore.
This is the script I wrote:
Code: Select all#!/bin/bash
synclient VertEdgeScroll=1
syndaemon -d -t -K
exit 0
So I made a chmod +x on the file, placed it in ~/bin then change PATH to include the directory. Then I added this file in "Startup applications".
The scripts run ok, mais it has a different effect than if I run the commands manually.
View 10 Replies
View Related
Mar 14, 2010
how to start the desktop enviorment from the command line.
View 2 Replies
View Related
Sep 19, 2010
Is it possible to instruct Ubuntu to start up (GUI) Graphical User Interface mode from (CLI) Command Line Interface mode? In the old days, you can type "win" in DOS to get into Windows - something along that line. Is it possible for Ubuntu in this case?
Yes, you can reboot to switch between the modes, but shouldn't there be a command for this?
View 2 Replies
View Related
May 20, 2010
I've been searching for hours now on how to start compiz from command line and configure the plugins. I just want to use the compiz core package in Slackware (no add-ons for now). I've figured out starting compiz
Code:
compiz --replace
and the windows decorator
Code:
gtk-window-decorator --replace
kde-window-decorator --replace
for gtk based or kde respectively. I know how to start the plugins (by putting their names in the compiz command), but not what all of their command line names are.
What I'm looking for is all the console names of the base plugins (and eventually the others too), the order they need to be started in (if any), how to automatically start compiz when X starts, and how to change plugin settings (all without ccsm). How to do the above stuff without the use of a graphical tool.
View 14 Replies
View Related
Jul 14, 2010
Anyone know why my fresh installation of centOS server is so slow? Seems like it takes over a minute to execute a command, im not doing anything complicated either. Secondly, how come at times when I type reboot the machine starts to beep, one long loud annoying beep.
View 5 Replies
View Related
Jun 28, 2010
I'm wanting to be able to run the Open Suse start menu from the command line.king remotely, I have found that I have faster response time by only running specific X components instead of an entire desktop (particularly useful under Windows 7 Cygwin). Specifically, I'd like to invoke the start menu from a ssh command line.On Linux Mint,line command is:mintmenuWhat is the equivalent command to bring up the Slab Start Menu on Open Suse?
View 8 Replies
View Related
Jul 10, 2011
How to stop/start KDE from the command line (Terminal) on opensuse 11.4?
View 9 Replies
View Related
