Software :: Install On Centos From Command Line?
Mar 26, 2010How to install software on centos from command line?
View 8 Replies
ADVERTISEMENT
CentOS 5 :: How To Install Command Line Instead Of Desktop
Jul 27, 2010Just got the new Dual Quad Server and after the installation was completed, It was the destkop edition... Can I get a reference on how to install the "Command Line Only" version of CentOS, OR Can I run the desktop edition and still be able to host VPS's and Web Servers, etc...
View 3 Replies View RelatedCentOS 5 :: Get Command Line But No GNOME On 5.6 New Install?
May 3, 2011It's a new install on a laptop, it looks like it installs fine, however after a boot I get login & password prompt and command line. I did choose GNOME desktop during the install.I know I will have problems to get 1080p resolution with my Intel integrated card Ironlake but at least I expect to have GNOME with min resolution 800x600.
View 5 Replies View RelatedCentOS 5 :: Added Gnome And X To Command Line Only Install - How To Make X Start At Boot
Nov 5, 2009I've got an install of CentOS 5.3 in a VM which was installed without X or Gnome.I've added X (yum groupinstall 'X Window System') and Gnome (yum groupinstall 'GNOME Desktop Environment) and can now run startx no problem.However on boot I get a command line login rather than the graphical login screen one normally gets if Gnome is included at install time.What do I need to do to get the graphical login after boot?
View 3 Replies View RelatedCentOS 5 :: CentOS Server Command Line Very Slow?
Jul 14, 2010Anyone know why my fresh installation of centOS server is so slow? Seems like it takes over a minute to execute a command, im not doing anything complicated either. Secondly, how come at times when I type reboot the machine starts to beep, one long loud annoying beep.
View 5 Replies View RelatedCentOS 5 :: Battery Info Through Command Line?
Dec 16, 2009I'm using CentOS 5.4 x86_64 on my Dell Inspiron 1440. Is there any way I can get information about the battery(charge) through command line without X server.
View 1 Replies View RelatedCentOS 5 :: Setting YUM Priorities From Command Line?
Jul 14, 2010I'm using several 3rd party repos for Centos - RPMforge, ATrpms, EPEL, REMI. Is there some way I can set the priorities for these repos in a bash script, using a YUM command? I cannot find anything in the YUM man page, or the yum-utils package.
Smart PM has a command to set channel priorities from the command line. Wondered if I can do the same for YUM repos?
CentOS 5 :: Command Line Formatting And Encryption?
Sep 8, 2010As I recent convert from Ubuntu to Centos, I have a lot to learn. In Ubuntu, I can plug in a memory stick, run the menu option: System/Adminstration/Partition Manager, highlight the memory stick and choose "Format: Encrypt"
In Centos, my memory stick is /dev/sdc1, how do I, using command line: format it as /ext3, encrypt it using cryptsetup, and set a password?
Fedora :: Run Python3 Scripts From Command Line And Call Up Python 2.6.2 Idle With The Command Idle From Command Line?
May 29, 2010i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies View RelatedCentOS 5 Server :: Setup Printer From Command Line?
Feb 24, 2009I'm from a Solaris (printer.conf) background and having trouble setting up a printer on the network. My CentOS box does not have a GUI interface available. I have been playing with lpadmin trying to add a printer - which it did, but everything is disabled, and the "enable" command is not found on my machine.
How do I make a simple printer on my network talk to my centOS box?
Here's the printer.conf from a Solaris machine that works:
raphael:
:bsdaddr=igppps1,raphael,Solaris:
And the printers.conf from the CentOS box:
lumina# more printers.conf
# Printer configuration file for CUPS v1.2.4
[Code].....
CentOS 5 :: Pidof: Invalid Options On Command Line?
Aug 19, 2009when i show status ricci on centos5.3x86_64 #service ricci status pidof: invalid options on command line pidof: invalid options on command line p is stopped how can i fix that bug ?
View 4 Replies View RelatedCentOS 5 :: Printer In GUI Can Print Fine From The Command Line
Oct 6, 2009I work at The University of Alabama as a sysadmin on various HPC resources and also provide support for faculty using Unix systems. I've run into one problem that is affecting two different desktop systems running CentOS 5.3.oth of these systems have the latest updates. These machines have standard network-attached printers. One is an HP LaserJet 3250 and the other is a model that is pretty close to that one.Previously these users were able to print from graphical applications such as Firefox, but now when the print dialog is opened on ANY graphical application, it causes a hard freeze on that particular app.Printing from the commandline via `lpr` gives no issues and test pages from the Printer Admin interface also succeed.This problem has me stumped, so I'm looking for any insight as to what could have changed. I do not know what changed between the time when the printers worked graphically and when they stopped, but the users assure that they have changed no settings. The only thing I can suspect is a rogue update since this is affecting separate users on separate machines with separate printers.
View 4 Replies View RelatedCentOS 5 Server :: Create An User Through Command Line?
Dec 16, 2009i have a server running on centos5, i have run vsftp and samba, and i need create a user through command line and set your default directory, i can do this through graphic interface, but i need do throug line command.
View 12 Replies View RelatedCentOS 5 :: Remove Temporary Files Through Command Line?
Jan 16, 2010Where exactly are the temporary files stored, in /tmp or /var/tmp. How can i remove temporary files through command line? What is the difference between these two directories?
View 2 Replies View RelatedCentOS 5 :: Active Directory Authentication Command Line?
May 21, 2010I have just installed the 32bit and 64bit versions of CentOS 5.5 and was wondering how I can add these machines to Active Directory for authentication. I've done this in the past with CentOS 5.4 using the GUI and everything worked just fine but now need to do everything from the command line.
View 1 Replies View RelatedCentOS 5 :: Setup Mail Client From Command Line?
Aug 9, 2010I have installed CentOS 5.5 with no GUI - how do I enable/setup the "mail" client command to be able to send email via my Exchange 2007 mail server on my LAN?
View 1 Replies View RelatedCentOS 5 :: Parport_pc Command Line Arguments Ignored During Bootup?
May 9, 2011I am having trouble trying to get the kernel to accept some command line arguments for parport_pc during bootup. I have a custom base board with a PC-104 CPU board connected to it through the ISA bus. On the base board I have 3 parallel ports mapped to addresses, 0x150, 0x158, and 0x160. Only the first one needs interrupts, the second two do not. So, on bootup I load the parport_pc module like this modprobe parport_pc io=0x150,0x158,0x160 irq=3,none,none I have been running an older RedHat kernel, 2.6.11 for the past few years and this has been working flawlessly. I had the above modprobe call in /etc/rc.d/rc.local.
Now I am trying to set the system up to use CentOS 5.5, kernel 2.6.18-194.el5. What happens is, the module inserts OK, but the system never recognizes the ports. (i.e, they do not show up in /proc/ioports)
But, if I log into the system, then rmmod parport_pc, then re-modprobe it as above, it works just fine and now my ports are visible. This is an embedded system, expected to just come up and run, so kicking it into action by hand is not an option.
I have tried putting a parport_pc.modules file in /etc/sysconfig/modules so that it will be seen by rc.sysinit, (some site I found while googling said modprobes need to be done earlier than in rc.local),and again, the module gets inserted but the ports are not seen. I have also tried putting rediculously long pauses between each step of the modprobing of the parport stuff;
[Code]...
CentOS 5 :: Determine What Host Name An IP Is Connecting To From Command Line?
Jun 8, 2011Is there any command which could help me to determine which host name (domain name) an IP is connecting to from the command line?
View 5 Replies View RelatedCentOS 5 :: /var/tmp/rpm-tmp.TdoItX: Line 7: Chmod: Command Not Found
Jul 7, 2011I've just tried to create my first own live-cd using the instructions here: [URL] With the minimal kickstart I get a weird problem though:
...
Installing: libselinux ##################### [ 81/114]
Installing: psmisc ##################### [ 82/114]
Installing: MAKEDEV ##################### [ 83/114]
[code]....
Notice that "chmod" and "touch" are part of the package coreutils which gets installed only after these commands are used. I'm seeing a similar problem with selinux being referenced before the libselinux package is installed. I can boot the resulting image but after the kernel boots it panics because it cannot find /dev/root which might or might not have something to do with the errors above.
General :: Manage Song Metadata On CentOS From Command Line
Mar 13, 2010I am making a simple Pandora.com alternative for myself and a few friends where the user can upload his/her songs and listen to them anywhere. My intent is to make a lightweight, simple player in HTML5 so all the user needs is a current Firefox or Chrome to use it. I have set it up so that all uploaded songs get converted to .ogg and added to a database but I also want some metadata (not sure if that is the correct term) for the songs to be stored in the database so the player can tell the user what song he/she is listening too. I know there are several GUI tools for managing the title/artist/album info for songs but I'm having trouble finding any good ones I can use from the command line. If the song has the information already in the file, I think I can use mplayer to retrieve the information but it would be really great if there was one that would look up the song information online.
View 1 Replies View RelatedGeneral :: Command Line BitTorrent Client For CentOS Linux?
Jan 4, 2011Is there command line BitTorrent Client in Linux? A PHP / Python script would be nice too.
View 7 Replies View RelatedCentOS 5 Server :: Mysqld Won't Accept Command Line Arguments?
Mar 28, 2009I have recently installed MySQL Server on my CentOS box.
CentOS 5 MySQL 5.0.45 (installed using 'yum install mysql-server') I can start the daemon without error by issueing the following command: service mysqld start
The problem is that I want to use a number of the command line options available to mysqld, such as --verbose and When I issue '/etc/init.d/mysqld --verbose --help' I get the following output:
[Code]...
CentOS 5 Networking :: Unable To Start Eth1 From The Command Line?
May 28, 2009I am trying to attach my server to 2 diferent networks, with fixed ip addresses,
eth0 = 192.168.0.2 255.255.255.0 with gateway 192.168.0.1. This is currently working, and I can ssh o the machine on this address
eth1 = 192.168.150.5 255.255.255.0 with gateway 192.168.150.1
When I try and start eth1 with ifconfig eth1 up, I get the error message "eth1: unknown interface: no such device"
I have configured eth1 using system-config-network-tui and /etc/sysconfig/networking/devices/ifcfg-eth1 looks correct
GATEWAY=192.168.150.1
TYPE=Ethernet
DEVICE=eth1
BOOTPROTO=none
[Code].....
CentOS 5 :: Commandline Newsreader - Preferably A Command-line Reader ?
Dec 14, 2010I recently bought a server running CentOS 5 (32-bit) and am looking to install a newsreader, preferably a command-line reader. I tried nget and Hellanzb but couldn't get either one to successfully compile.
View 8 Replies View RelatedCentOS 5 :: Pass Shell As Command Line Argument When I Ssh To An Account
Jan 25, 2011I want to have a choice or more preferable pass shell as command line argument when I ssh to an linux account.i.e. If John logs in to account "zzz" on server "abc", by default definition of account "zzz" n server "abc" he get csh.But Sally desires that when she logs in to account "zzz" on server "abc", she needs the login shell to be ksh,and Rick wants bash when he logs in to account "zzz" on server "abc".What is the most non-intrusive / easiest way to achieve this? Each user can set their preference on ssh command line or create a simple alias by each shell, but not sure how to do this.
View 6 Replies View RelatedGeneral :: CentOS Command-line Program To Randomly Change MAC Address?
Nov 7, 2009OS: CentOS 5.3 Enterprise Server
Red Hat Nash Version 5.1.19.6
I need to find a command-line program to randomly change my MAC address. I know on Ubuntu there is a program called 'macchanger'. And on Windows another one called 'macshift'. I just can't find one for CentOS 5.3 Enterprise Edition.
CentOS 5 :: Network Installer Automatic Settings (Script Or Command Line)
Nov 2, 2009Next week we will get a new Server for rent with a preinstalled Debian. If we download the Networkinstaller and put it in Grub, it is possible to set some settings with a script or commandline? We need SSH and the Network haves to run. So we have to set up the Networkadress , Gateway and Netmasq. So if the Networkinstaller is booting that we get direcly access with SSH to install CentOS. It is possible?
View 1 Replies View RelatedCentOS 5 Server :: Show All Services Running / Installed In The Command Line?
May 6, 2011Howto show all services running/installed in the command line under Centos 5.6 Server?
View 6 Replies View RelatedCentOS 5 Networking :: How To Create Wireless Network From Command Line With Hidden ESSID
Feb 27, 2011I have a CentOS 5.5 server running currently with a Netgear gigabit ethernet card and for wifi I have a wi-fi card with the chipset: RT2860.Now I have gotten the ethernet card and wi-fi card working but my main question is: How do you bridge the connection between the ethernet card and the wi-fi card to create a wireless network with a hidden ESSID if possible and WPA encryption? (So the server basically acts as a wireless router as well as doing all the other stuff I need to do on it).
View 2 Replies View RelatedFedora :: Run A Install From The Command Line In Virt-install?
Mar 8, 2010below is what happens when i try to run a install from the command line in virt-install. keep in mind that this is a fresh fedora12 install selinux is disabled logged in as root. i have never had so many problems with something and it is maddening for there to be a thousand freaking how-to's on the subject all acting like it is so freaking simple.
[Code]...