Ubuntu :: Activate Desktop Effects With Integrated Intel Card
Apr 8, 2011
I have Ubuntu Natty installed on my computer, and I cannot activate the desktop effects and animations. I know that they can be activated, as I used them on Gutsy, but they have somehow been disabled during an update. I want to reactivate them, but every time I try I am told that they cannot be activated because the right graphic card drivers are missing. I have an integrated Intel card on my computer. Is there any way I can reactivate the visual effects? If not, how was I able to activate them in Gutsy?
View 1 Replies
ADVERTISEMENT
Oct 17, 2010
I am fairly new to Ubuntu, so I'm sorry if I don't include any necessary information. Installed 10.10 rc from CD about 3 days prior to official release and everything was working fine... went about installing software and setting up laptop for use. About one week later, got prompted for upgrade and went ahead through update manager. Now can't enable desktop effects. Right after upgrade had a period where title bars of windows would not display... menus were present, but no title bars, no maximize/minimize/close buttons and no dragging windows to new locations on screen That has since resolved itself. Spent quite awhile searching forums, created xorg.conf at one point, later deleted it.
compiz-check says this:
Code:
./compiz-check
Gathering information about your system...
Distribution: Ubuntu 10.10
Desktop environment: GNOME
Graphics chip: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
Driver in use: intel
[Code]...........
View 1 Replies
View Related
Jan 16, 2009
How to enable Desktop Effects with Intel on board Graphics Card on Fedora 10?
View 1 Replies
View Related
May 30, 2011
I am using a Dell Latitude E6510 with QM57/QS57 Intel GMA HD chipset video card, when I am installing the Fedora 14, if I choose the 'Install the new system or update an existing system', it goes to blank screen.if I choose the 'Install system with basic video driver', it starts to install.BUT I cannot use the desktop effects, the Stellarium, etc, it says that 'accelerated 3D graphics is not available'. Even I have updated my kernel to 2.6.35.13-91.fc14.i686. As far as I know, QM57 do support a 3D graphics, what should I do to drive it to work.
View 9 Replies
View Related
Apr 4, 2010
I'm running Karmic Koala 64 bit on my Lenovo T400 laptop with switchable graphics having both Intel and ATI video cards. I've set my bios to use the intel card only and turned the automatic switching off. So far so good, but I'd like to turn on compiz for basic window animations. When I try to start compiz by selecting
Code:
"Appearance Preferences" -> "Visual Effects" -> "Normal"
I get an error message saying "Desktop effects cannot be enabled"
Code:
"System" -> "Administration" -> "Hardware Drivers"
doesn't show any new drivers that could be installed. This was working out of the box when I first installed Karmic Koala a few month ago, but things got messed up when I installed the restricted drivers for my ATI card. Now I can enable compiz if I switch to ATI from my bios settings and install the drivers but I don't want to use it due to high power consumption and I've removed the ATI drivers.
Here is my xorg.conf file:
Code:
Section "Device"
Identifier "Configured Video Device"
EndSection
[code]....
View 6 Replies
View Related
Jan 27, 2011
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
View 5 Replies
View Related
Mar 3, 2011
I am working on my friend's Compaq Presario SR5413WM with an integrated Geforce 6150SE gpu.Issue 1: I cannot activate desktop effects. This message shows up when I attempt to. " Desktop effects are not supported on your current hardware / configuration. "When I enable it my monitor becomes extremely distorted before it reverts back to original settings.Under hardware information > Display > Geforce 6150SE the driver is listed as nouveau. Issue 2: Flash video such as ..... videos are now unable to render. When playing a video it is also distorted and unwatchable.
View 6 Replies
View Related
Aug 8, 2010
I'm new to OpenSuse. Just installed it in my laptop.. Overall a great distro, I'm just getting trouble with some video aspects. I'm currently using the open-source radeon drivers. However, I can't activate desktop effects (ok..) and video playback looks choppy (sucks, I get like 3 fps). I've already tried some solutions, like installing fglrx driver (which makes my X system buggy) and trying to manually enabling DRI in xorg.conf (which didn't work).
My laptop GPU is an ATI Mobility HD5650.
Currently running OpenSuse 11.3 using KDE Desktop and radeon drivers.
Here's some of the result from my glxinfo (using auto-configured xorg, i.e., no xorg.conf):
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.4
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 1.4 (2.1 Mesa 7.8.2)
View 4 Replies
View Related
Jun 22, 2011
I have a Dell Latitude D520 with an Intel 945GM Integrated Graphics Card. I have been unable to get the desktop effects to work in either Jaunty or Karmic. When selecting Normal/Extra/Custom, I get an error:
Code:
Desktop effects could not be enabled
Graphics card info:
Code:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 942/940GML Express Integrated Graphics Controller (rev 03) I've looked at countless threads pertaining to this issue, but nothing I could find resolved my issue.
View 7 Replies
View Related
Aug 18, 2010
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
View 8 Replies
View Related
Oct 31, 2010
I've been using slackware64 13.1 ever since it came out on my Dell Inspiron 1525, and I haven't really had any problems with my webcam in that time. However, last time I tried to use skype - I noticed that it couldn't detect it.
In kinfocenter, my webcam is picked up (OmniVision Technologies). The only time I've had a similar problem in the past is when I used the "Compact" option in lilo.conf, and the webcam wouldn't turn on. Just removing the option solved the problem.
Since I don't know what steps caused this to happen, I'm not sure where to start fixing it
View 2 Replies
View Related
Dec 26, 2009
I installed a PCI graphics card "ATI RV280 5960" but it still says desktop effects cannot be enabled. What do i need to install/do to get that to work?
Using openSUSE 11.1
The card itself (on a sticker) says it's a Radeon 9250.
View 5 Replies
View Related
May 4, 2010
Lucid is not in testing but it's released.It seems it works now, with all desktop effects activated and switching users and closing sessions.The only thing I still don't know is which screensaver can I use if removing gnome-screensaver?
View 1 Replies
View Related
May 1, 2011
Just put 11.4, 32 bit on a system with an Intel D865 GLC motherboard and 865G built in graphics controller. While the install went OK it turns out that X is totally hosed. After fighting with things for a while and discovering that Sax2 had disappeared I poked at Google and discovered some other poor folks that have had similar issues with Intel video cards. Based on a suggestion for a doc in OpenSuse.org I edited the file: /etc/X11/xorg.conf.d/50-device.conf
and added the line: Driver "intel" to it - after that things got better. Obviously the install process had not identified the video card correctly. I'm now left with another issue - while the system now identifies the driver and can talk to the monitor correctly, a Samsung S23A350H I can't open a window after X comes up and I login - basically the same issue as the unresolved Bug 673873: [Bug 673873] intel [865G] Windows flash rapidly or don't appear if Desktop Effects are on in KDE and GNOME
The workaround is to turn Desktop Effects off but since X doesn't work I can't figure out how to do that. I can't find the gnome-xgl-switch or a xgl-switch that used to exist to do it on the command line so that's out. Someone said you could drop the empty file "disable-compiz" in the ~/.config/compiz directory and that would do it but in 11.4 that directory doesn't exist. how to disable "Desktop Effects"/XGL/compiz or whatever it is now called on the command line in OpenSuse 11.4 without a gui if that is still possible?
View 6 Replies
View Related
Jan 10, 2010
I can only log into X with "vesa" driver (otherwise it gives me the black screen) and ubuntu never boots directly into GDM, always the console.
View 1 Replies
View Related
Dec 25, 2010
I previously had a dual output Nvidia 7300le which worked fine with 2 monitors (2xDell e196fp). Now however I have just added a new monitor to my setup (and a different graphics card). I've gotten to the stage where it recognises all 3 monitors (2xdell 196fp and 1x samsung syncmaster) and also the new graphics card (Nvidia PCIe 210)...it took me ages to get to this stage and a lot of hacking around in the bios!
I've got it so that it runs two monitors fine (the two connected to the graphics card) but I cant manage to extend the desktop onto the monitor connected to the integrated GPU (I can on windows). It definitely recognises it as when I startup it gives me a command prompt on the 3rd window (integrated gpu) and then when I do startx it runs the session on the other two monitors!
[Code]...
View 1 Replies
View Related
Sep 1, 2011
in ubuntu land i have been thinking and i have intergrated HD graphics on my craptop i bought it for my study so it doesn't really matter but my theoretical max graphic memory is 3GB and i am only using 128 MB now has any one figured out a way to alter the default ;/. im sure it is possible to increase processing power form the split with CPU to but im sure acer have locked such capability.
View 5 Replies
View Related
Feb 23, 2010
Suddenly, i was working fine with my Karmic, and now can't activate desktop effects.
First windows lost borders, so I reset X (ctrl+backspace) and since then, effects went to hell.
I've reinstalled nVidia drivers. All went fine, but desktop effect still disappeared.
See the commands output below code...
View 2 Replies
View Related
Jan 21, 2011
I have PC with Motherboard Intel Desktop Board D945GCNL, and Ubuntu 10.10 installed on it. Graphic card was working fine, but recently i don't know what happen suddenly the visual effects stop working, and i believe the issue with the identification of the VGA. with error message "Desktop effects could not be enabled" i checked some forums related but wasn't able to solve it. when i type compiz. it stuck on the below:
[Code]....
View 9 Replies
View Related
May 10, 2010
I have an ethernet card that used to work with Linux, but it had its firmware corrutped. (not as a result of the kernel its a different model) I think it had something to do with the thunderstorm I was using the computer in. Anyway, it is an Intel 82562EZ 10/100 Ethernet Controller (rev 01). The device manager in windows xp calls it an Intel PRO/100 VE card, which I think is the same thing. The card works in windows but not in linux. Upon firing up the intel proset software, and running hardware diagnostics the test says the eeprom test failed. Is there any way I can flash the eeprom so I can have a working card?
EDIT: Card fixed after leaving unplugged. It is important to also unplug the power supply connectors from the motherboard as well as capacitors may not discharge otherwise. Also be sure to remove the cmos battery. Oh, yeah don't try to use that intel utility on integrated networking devices. "IBAUTIL is not intended as a utility for LAN-On-Motherboard (LOM) [integrated] implementations."
View 1 Replies
View Related
Nov 25, 2010
As this seems not yet to be covered in openSUSE Graphic Card Practical Theory Guide for Users I am asking here.
The Motherboard is an Asus P7H55-M Pro with Intel Core i3 530@2.93GHz. openSUSE 11.3 assigns the i915 driver by default:
Code:
# lspci -vk
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 8383
Flags: bus master, fast devsel, latency 0, IRQ 30
code....
View 9 Replies
View Related
Feb 1, 2010
I'm about to buy a laptop and there are some interesting and affordable Toshiba ones, but they all have Intel GMA 4500M graphic card. I have NVIDIA card on my desktop and their drivers work perfectly, i was just wandering what the situation with Intel's graphic cards is. I need 3D rendering for compiz and stuff, is it too much of a hassle to enable them?
View 2 Replies
View Related
Jul 18, 2011
[code]...
Just got World of Warcraft Installed and when I start the game after I get past the 2 cinema's while I'm trying to click yes on the rules the screen seems to bee flashing over and over and over. I was thinking maybe the 3d accelerator isn't installed or maybe I need to install something because its Intel?
[code]...
View 2 Replies
View Related
Aug 24, 2010
I'm using a lenovo notebook with switchable graphics (Intel HD and ATI Radeon 5650), and I'd like to have Ubuntu use the integrated graphics, but I can't figure out how. The BIOS has two graphics options: switchable and discrete. On discrete just the ATI card runs, but on switchable, it seems like both cards are being used. Is it possible to use just the integrated graphics?
View 8 Replies
View Related
May 2, 2010
I have a new Intel Atom D510 and I'm pretty pleased with it so far. The board is Zotac NM10-ITX.
My first issue was that during long and fast downloads (like transferring my home directory over the network) the system become pretty unusable: web pages would time out, windows would take more than few seconds to load, etc. I solved this by recompiling the kernel for the Atom. (The compile time wasn't that bad actually because the system is pretty simple and it was easy to isolate only the drivers I needed).
My next issue is that certain GUI-related things seem a little sluggish. For example, when the GDM loads it's not smooth like on other computers. When I log in, my background doesn't fade in gradually, it does so in about 1-2 frames. I was thinking this might be an issue with the GPU. It uses the i915 kernel module. Is there some tweaking I can do?
Code:
I was expecting to see a memory region of prefetchable memory around 128M here. Is this a problem?
What are you atom users doing to speed up your systems? I'm on Archlinux and I'm using a BFS patched kernel.
View 1 Replies
View Related
Aug 19, 2010
I have been unable to get both opensuse 11.2 and 11.3 32 bit versions work properly on my DELL Latitude E6410 laptop. With both 11.2 and 11.3 KDE Live CDs I get no graphical display when I attempt to boot into the Live system. VESA mode does not help either, only text mode works. So I installed the system in text mode but during the first boot the screen went blank again.
One peculiar thing is that 11.1 installs and boots fine, what gives? Is this even supported or I shouldn't even try to bother getting this setup to work? Has anyone been able to run opensuse 11.3 on a Core i7 integrated Intel graphics system with X system working?
View 9 Replies
View Related
Aug 26, 2010
im using the ubuntu distro and when i goto the visual effects tab and click on normal or extra, it says "desktop effects could not be enabled" also, i have Two hdd's, a 100GB that has windows 7 and ubuntu. and a 250GB that has Windows XP. GRUB didnt notice windows xp though, so its not a boot option.
View 5 Replies
View Related
Apr 8, 2010
I have a DFI RS482 mobo with integrated sound. I am making a car puter and only have a 2GB CF card, so I installed a server install of Ubuntu. Then I got xserver-xorg, mplayer, and fluxbox. I downloaded and installed the latest nvidia driver. Mplayer spit out tons of sound errors and that's when I realized the server install has no sound. So I installed the 'alsa', 'pulseaudio' and 'pavucontrol' packages. Now mplayer does not complain and acts like it is playing sound, but nothing happens sound-wise. Pavucontrol shows mplayer as playing sound and the volume as unmuted. However the PCM output is going to "dummy output" and the configuration tab says there are no cards to be configured.
So I think my sound card is not being detected. I don't know what to do at this point.
lspci shows "Multimedia audio controler: ATI Technologies inc. IXP SB400 AC'97 Audio Controller (rev 80)"
alsamixer fails on "function snd_ctl_open failed for default: No such file or directory"
lsmod | grep 97 returns a bunch of stuff, but I'm not sure what it is.
View 4 Replies
View Related
Jul 5, 2010
Here are my Specs:
Netbook: HP Mini 210-1012EZ
Network Card: Broadcom Corporation BCM4312 802.11b/g (rev 01
Ubuntu: 10.04 Netbook Remix
CPU: 32Bit
Wired and Wireless Networks work perfectly the only issue is the Mobile Broadband. When I try to setup my Mobile Broadband connection manualy using the Network Connections Manager the device drop-down is grayed out and it doesn't seem like my network card is being recognized as a Mobile Broadband Card. When I had Windows 7 installed and started ubuntu over a USB Drive the connection worked great. I've followed the steps at [URL] too and it all checked out.
I found another idea in a thread here and I've tried that too:
I added the following line to my /etc/modules:
echo b43 | sudo tee -a /etc/modules
I've also tried using the Broadcom STA drivers that ubuntu offers but it doesn't seem to make any difference.
View 1 Replies
View Related
Jun 4, 2010
permanently open BASH Shell open, on the side of the GUI. This would mean re-sizing the GUI... You would basically have a divider between the shell, and the GUI, so that you could resize either, depending on which you were working with more. For some programs, which open a new shell (aeroscript for example), that stays open behind the GUI, or has an ASCII "GUI", the program would simply open in a tab of the shell. The main shell would be dynamic; meaning that whenever you selected a new window in your GUI, the shell would automatically cd to that directory, in order to save some time. This would be especially useful when editing many files at once with a text editor such as Nano or VI. Alternatively, there could be a different shell tab open for each session of the file explorer. This however, could get quite cluttered. It's still a pretty raw idea. I did some Googling, and so far haven't come up with any similar ideas or actualities." This should also have options as to which shell you would like to install with it (BASH, KSH, ZSH, etc.)
View 1 Replies
View Related
