I have an intel core i3 laptop, it has 4gig of ram only showing 2 I am also running the x64 bit version of fedora 14.. My graphics will not work correctly. I have tried the intel driver for linux.. It did not work( or i did something wrong) very possible in messing up the install. I would llike to know if there is an update coming out or if i could get a step by step on how to fix, this issue..
View 2 Repliesfor some reason the drivers for my laptop graphics are not showing up.
The laptop I have is Acer 1810T. It has intel GMA 4500MHD graphics.
I also have a desktop which has Nvidia 9800GT graphics card and the drivers for that showed up automatically when i went to additional drivers in ubuntu.
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
I have Dell E6510 laptop with i5 CPU (Arrandale), Intel HD integrated graphics card (Ironlake), and 1080p display. I know other distros are also having problems with Ironlake but there are some work arounds.
Is there a way to install 5.5 on my laptop and have UI and 1080p resolution?
I have to say that 5.4 Live runs well - UI loads with correct resolution. With 5.5 live I get black screen.
I'm not able to get the Desktop Effects/3D graphics to work on a Gateway laptop. I suspect that I'm not using the correct nvidia drivers but I don't know what drivers I need for my system.I followed the instructions from this link with no luck.
Some system info:
# uname -rs
Linux 2.6.35.10-74.fc14.x86_64
[code]...
i previously posted a thread http:[URL].. that was regarding gaming issue, but now i got a bigger issue. i installed Intel 2010Q2 graphics package from [URL].. i first upgraded xorg-x11-server and related packages and installed devel package using yum.. later i compiled and installed kernel 2.6.34 and other packages included on [URL].. i rebooted the system and it showed display driver unknown so, i used system-config-display --reconfig and it detects my mobile 4 intel chipset. and when i reboot, GUI won't load .. when services finish loading screen goes blank and harddisk light blinks at constant intervals and i can't switch from GUI to CUI either using CTRL + ALT + F2 etc [URL].. PS i am able to login into single user and change xorg.conf
View 6 Replies View RelatedPurchased a slightly used T61 Thinkpad via a client of ours at work last week. I've been really happy with it so far, dumped 4GB RAM in it and have Vmware workstation running on it and all is well except the graphics drivers.
According to LSPCI the machine contains the device listed below.
Code:
X displays just fine and compiz works out of the box, but I'm only getting around 59 FPS with GLXgears. I do like to play the occasional game and what not, so i'm really hoping to get this increased. I've heard of running Tremulous on this card, so I imagine it can do it.
Is this low for this card?
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
I have Fedora 11. After my most recent update, I can't log in. Every time I authenticate, the logon window disappears, the screen goes black briefly, and then I am back at the log in window I entirely reinstalled, and then it worked, until I updated to the newest kernel then it didn't work anymore. Update: I now generated a xorg.conf with system-config-display --noui I manually removed and reinstalled xorg-x11-drv-intel with yum. It didn't work. By the way: now the start hangs on "Starting atd: OK" If I specify "vesa" in xorg.conf, then it gets past the point, but display doesn't load properly.
View 14 Replies View RelatedWhen I was 12 fedora with graphics acceleration worked well and without problems but now I installed fedora 13 dvd compatible with everything when I installed it and no problem only in go to System> Preferences> Desktop Effects I came with a message.
Code:
3D graphics acceleration not available. Desktop effects require hardware support for 3D. I was surprised what I came out.
And try to end with the console
Code:
But most disappointing is that I do not use Nvidia, ATi, Intel only: / will get more info put this command and I miss it.
Code:
i am using fedora 14. i need graphics driver for Intel 82579v . while moving folders it shows poor graphics.Login screen open as step by step. while playing videos ,it hang.my system is very slow now with high configuration. My system hang while improve graphics option in System-> Preference->Desktop Effects and select compiz and
View 1 Replies View RelatedIs there away to update my driver. In my Xorg.conf all I have under driver is "Intel" I am using an Intel GM45 card and I don't have 3D support.
View 14 Replies View RelatedI have Fedora 11 and Intel Intel D410PT With Integrated Intel Atom Processor D410 and the Intel NM10 Express Chipset M-ITX Motherboard..Intel Graphics Media Accelerator 3150.How can I get Fedora 11 to install in graphics mode-would a PCI card and disable onboard stand a chance?
Do I have to "slipstream" the right driver in the install?Intel seem not to have a Linux driver-is there a generic one?
I want to downgrade my Intel driver to version 2.11.0. I don't know what version I have at the moment but I have installed Fedora 15 (Lovelock). The reason is that Office 2007 has graphical bugs with Intel drivers that are newer than 2.11. So, will my gnome shell work fine after the downgrade and how to downgrade? I have searched a lot from google but didn't find any solutions.
View 3 Replies View RelatedAfter install F12 on a clean install, I can't change the display resolution, my graphics card is a Intel 82945G/GZ, my monitor is a LCD 32" TV
I follow this steps:
Quote:
Then I edit the xorg.conf file with this code:
Quote:
But nothing, I still get the 800x600 resolution and I can't change it.
Is this a driver bug?
I'm a Fedora 12 user on an HP Pavilion dv4 laptop. I'm currently using kernel 2.6.32.11-99.fc12.x86_64, graphics driver xorg-x11-drv-intel-2.9.1-1.fc12.x86_64, and mesa 7.7-4. My graphics card is an Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07).
I've been having some problems getting my 3D acceleration to work. Although it worked correctly in Fedora 11, I have not been able to get it to work yet in Fedora 12.
The output of glxinfo shows:
Running glxinfo with LIBGL_DEBUG=verbose shows:
I found a similar message here: [url]
However, I'm not sure if this is the same problem I have. What does the drm_intel_bo_busy message mean?
[A word of explanation: initially the post below followed a post by Adam Williamson in another thread devoted to inability to load GNOME 3 in VM; this is why I address Adam in the opening.]
Adam, the situation with the GNOME 3 support for Intel integrated graphics seems to be a little confusing. You are probably among the most competent to clarify it.
Let me tell my own story first.
I was installing earlier today Fedora 15 on an HP dm4-1160US laptop with i5 and Intel graphics, and the anaconda installer hung right after "Waiting for hardware to initialize..." flashed on the screen, before even Media Check screen was reached. I tried a few times, always with the sae result: anaconda hung. Then I decided to add nomodeset to the boot parameters and the anaconda installer went on and I was able to complete the installation without a slightest problem.
I rebooted and without a problem reached the GDM login screen. When logging into GNOME, a pop-up window informed me that the system was unable to load GNOME and that instead I would be logged into the fall back mode. By the way, I haven't experienced the problems that plagued "Classic GNOME" on another laptop of mine where instead of clean install I preupgraded from Fedora 14 (strictly following the guidelines for preupgrading).
Wireless card was recognized and wlan initialized, nearby wireless networks seen, yet I wasn't able to connect to my own wireless network (I tried to do this already in the process of installation, equally unsuccessfully).
I was able to connect via Ethernet cable, and then I proceeded to perform yum update.
The update brought a new kernel. I went into grub.conf and noticed that nomodeset has been automatically added to the boot parameters for each of the two kernels. I decided to perform an experiment: I removed nomodeset from the boot options for the new kernel, and left it in place for the anaconda installed kernel.
I rebooted into the new kernel. Right after the grub menu disappeared, the screen turned pitch black and stayed this way for good 10 seconds. I thought that the former situation repeats itself making impossible to boot without the nomodeset option. Suddenly, the screen lit up and the GDM login screen appeared.
I logged into a shiny GNOME 3 where I am writing these words right now. Ah, and I was also able to connect to the wireless (I made yet another attempt using the network manager applet -- this time it worked).
What does that seem to indicate? That GNOME 3 support is already available for Intel graphics chips? But one may need to play with the nomodeset cheatcode, as I described this above?
i've been trying to load F15 on a HP DV4 (switchable ati/intel graphics, no hardware switch). the system boots from dvd fine, but gets stuck right after the starting anaconda message with a non blinking cursor on black screen and nothing happens after that.
View 2 Replies View RelatedHow to enable Desktop Effects with Intel on board Graphics Card on Fedora 10?
View 1 Replies View RelatedFor some reason my laptop runs hotter when running Fedora, than it does with windows. I am wondering if the problem is with video. Currently using default video driver.
View 3 Replies View RelatedI cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
View 1 Replies View RelatedI just put Fedora 11 on my Lenovo Thinkpad t400. I selected the integrated (lousy, but Intel (supported)) graphics device in the BIOS, but I really hate the lower performance than the discrete graphics device. However, this device requires fglrx or radeonhd for DRI. RPMFusion has not released an (a)kmod-fglrx, so I can't use that. I have heard radeonhd has some stability issues though, and I don't know how to install. I was wondering how I could completely change my graphics configuration (change chipsets in the BIOS) and get the X Server in Fedora 11 working with the new driver and chipset. Is it a good idea to use radeonhd, or should I wait for the fglrx?
Even then, how would I completely change my graphics configuration so it would work with a different card & driver? I don't want to do a fresh install because I've done a lot of work & customization with the F11.I don't know anything about radeonhd, so any information about this kind of thing would be useful.Finally, should I just suck it up and deal with the Intel graphics? Is anything of this sort really worth my time? (I'm willing to spend quite a bit, trust me!)
I'm using a Gateway LT3103u running a dual boot of Win 7 and Ubuntu 10.10 (separate partitions) and ever since I've started using Ubuntu (last October) I've had persistent graphic card problems.
My graphics card is the ATI Radeon X1270.
Right now I can't use any visual effects because of I do the screen spazzes out and becomes unusable. This isn't a big deal for me since I don't use them but I figured it's relevant to the problem.
Even with visual effects off I still have problems and at times parts of the menu will stay on the screen in a little box which covers any windows that open beneath it. The only way to get rid of it is to turn visual effects on so the screen resets then hit use previous settings.
I'm rather new to Linux and haven't been on it for more than a week. I've been trying to find a Linux operating system that'd be compatible with my computer - I went through about 4 of them before finding openSUSE and really liking it. My main problem now, however, is that it seems to be rather unstable when it comes to running programs after a while. I've been on the computer for about 30 minutes for this session and tried using skype, for example. After about 5-10 minutes of using it, skype ended up crashing. There weren't any other programs open at the time either. After a while of doing anything, it usually lags up, taking about a minute to unstick so programs respond, and even gets to the point where it sometimes doesn't detect my keyboard strokes (though I think this is a separate problem that has to do with the disfunctional multimedia buttons - usually, after a minute or two, the typing begins to work again).
I've also noticed, however, that when trying to start up, the computer automatically goes to a 'start up options' screen where I can either boot in openSUSE normally or try the failsafe option. Is this normal? Usually, before shutting down or booting up, a black screen with white writing will flash by, sometimes followed by multicolored stripes before settling on the openSUSE log-in screen - at first this freaked me out and I'm still not sure if that means it's having an adverse reaction with the computer. The webcam doesn't stay disabled either after restarting, but I'm not sure if this is normal or not.
Has anyone else experienced these problems? The Windows Vista Home 64-bit that I had installed on my computer originally was OEM and I tried calling Gateway for help with the computer when something happened to the operating system that made it unable to connect to the internet regardless of what I tried to do (even the system diagnostics tool didn't help). I mention this because I'm wondering if the fact that it was OEM might have something to do with it? Or should I not try Linux at all on here and return back to Windows for this one? I've read around and a few people have said Linux is best working when installed by the manufacturer before purchase. Is this true?
After the problem with Vista, when I came upon the Linux OS's I was really intrigued, and I find I really like them especially for the fact that there's so much interaction with the terminal command prompt. I'd like to continue working with the openSUSE OS but does it sound like I should? or should I install the 32-bit version instead?
[Code]...
After I put my laptop for a system update, some of it [sounds] works selectively in my browser when I am watching ..... but when I am playing some musics on my desktop, there's no any sounds coming out. Then I noticed that my Output is still in 100% but 0.00db and a Dummy Output.
I already tried some steps I saw in some threads that has the same problem too but it became worse, I no more [completely] sounds anymore.
I'm running ubuntu 10.10 on a gateway NV7915u laptop that has built-in bluetooth. However, ubuntu doesn't seem to be detecting it (it tells me that my computer doesn't have any bluetooth adapters plugged in).It seems that Fn F6 is supposed to enable bluetooth, but it doesn't seem to actually be doing anything
View 6 Replies View RelatedI have two computers. The first computer has windows xp in it and is a member of the local lan with ip address 192.168.11.21. The second is my laptop having ubuntu 8.10.Both these computers are connected to each other via the broadband router which assigns ips 192.168.1.3 to my laptop and 192.168.1.1 to my desktop. I am able to browse the lan of 192.168.11.x via the desktop and I want the same possible on my laptop whose only connection is through the router to the desktop. Is there any way I can do it?
View 1 Replies View RelatedMy gateway laptop shuts down either imediately after booting, or while I'm online, usually within the first 5 minutes. I have a laptop cooler and aima fan at the laptop while using it. Could it be the hard drive? Is there any way of knowing before I buy a new hard drive?
View 5 Replies View RelatedOk I am a complete Noob when it comes to anything other than a windows based unit, so please be patient with me. I am able to connect to the Internet using a wired connection.
View 6 Replies View Related