CentOS 5 :: 5.4 Support Intel Q45 Graphics Chip?
Nov 18, 2009Does CentOS 5.4 support Intel Q45 graphics chip? If it does not support, How do I install the driver manually?
View 1 Replies
ADVERTISEMENT
CentOS 5 Hardware :: 5.5 - Does Currently Not Support Oxford's OXPCIe952-F Serial Controller Chip
Jan 27, 2011Is it possible that CentOS 5.5 does currently not support Oxford's OXPCIe952-F serial controller chip? We've added one of those PCIe x1 cards to one of our servers since we need additional serial interfaces but it doesn't seem to work. Instead of three serial ports (the server comes with one already, the controller adds two more) we still only have ttyS0:
Quote:
root/linux2$ zgrep ttyS /var/log/*
/var/log/dmesg:serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
/var/log/dmesg:00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[code]....
Ubuntu :: Enable DVI Support With Intel Graphics ?
Nov 7, 2010I need to use my TV as a monitor via DVI.
Using Meerkat 64. Here's some specs:
Code:
Because the Physical ID is 2.1, I'm fairly certain this is the DVI port. Do I need a driver for this to work?
Fedora Hardware :: Intel Graphics Card - Don't Have 3D Support
Dec 1, 2009Is there away to update my driver. In my Xorg.conf all I have under driver is "Intel" I am using an Intel GM45 card and I don't have 3D support.
View 14 Replies View RelatedFedora Installation :: GNOME 3 Support For Intel Graphics Chips And Nomodest
May 27, 2011[A word of explanation: initially the post below followed a post by Adam Williamson in another thread devoted to inability to load GNOME 3 in VM; this is why I address Adam in the opening.]
Adam, the situation with the GNOME 3 support for Intel integrated graphics seems to be a little confusing. You are probably among the most competent to clarify it.
Let me tell my own story first.
I was installing earlier today Fedora 15 on an HP dm4-1160US laptop with i5 and Intel graphics, and the anaconda installer hung right after "Waiting for hardware to initialize..." flashed on the screen, before even Media Check screen was reached. I tried a few times, always with the sae result: anaconda hung. Then I decided to add nomodeset to the boot parameters and the anaconda installer went on and I was able to complete the installation without a slightest problem.
I rebooted and without a problem reached the GDM login screen. When logging into GNOME, a pop-up window informed me that the system was unable to load GNOME and that instead I would be logged into the fall back mode. By the way, I haven't experienced the problems that plagued "Classic GNOME" on another laptop of mine where instead of clean install I preupgraded from Fedora 14 (strictly following the guidelines for preupgrading).
Wireless card was recognized and wlan initialized, nearby wireless networks seen, yet I wasn't able to connect to my own wireless network (I tried to do this already in the process of installation, equally unsuccessfully).
I was able to connect via Ethernet cable, and then I proceeded to perform yum update.
The update brought a new kernel. I went into grub.conf and noticed that nomodeset has been automatically added to the boot parameters for each of the two kernels. I decided to perform an experiment: I removed nomodeset from the boot options for the new kernel, and left it in place for the anaconda installed kernel.
I rebooted into the new kernel. Right after the grub menu disappeared, the screen turned pitch black and stayed this way for good 10 seconds. I thought that the former situation repeats itself making impossible to boot without the nomodeset option. Suddenly, the screen lit up and the GDM login screen appeared.
I logged into a shiny GNOME 3 where I am writing these words right now. Ah, and I was also able to connect to the wireless (I made yet another attempt using the network manager applet -- this time it worked).
What does that seem to indicate? That GNOME 3 support is already available for Intel graphics chips? But one may need to play with the nomodeset cheatcode, as I described this above?
OpenSUSE :: Run X Without Using Graphics Chip?
Sep 30, 2010Is it possible to do this? I'm just thinking maybe I can run KDE without using the GPU so that I can use the GPU for computation (CUDA). The system I'm thinking of using is a laptop with Nvidia GTX260M video card. I've seen people talk about frame buffer, but I don't quite understand it because it seems that some people are talking about using frame buffer even when they have a video card on their system.
View 9 Replies View RelatedCentOS 5 Hardware :: Unable To Use Dual Monitor With Intel Hd Graphics
Nov 26, 2010I've installed CentOS 5.5 64 bit on a Dell Latitude e6410. This model only contains Intel HD Graphics, not the extra Nvidia card you could also buy in addition. The getinfo output can be found here:[URL] Initially X11 did not work at all (blank screen), but using hints from other posts in this forum I was able to fix this by editing the file xorg.conf using the vesa driver, although I still do not get the native screen resolution of 1200x800 (I alwas get 1152x768).
Now I want to add an external monitor (Samsung Monitor connected via DVI, screen resolution 1680x1050). Unfortunately as soon as I try to configure the dual head mode using the system-config-display tool after restart of the X server there will be the the blank screen again. I tried various drivers with no luck.Has anyone succeeded setting up dual head on an Intel HD Graphics machine? I understand that this hardware is quite new and and would be easier to set up with more recent distros, but I would like to stick to CentOS, but cannot wait for CentOS 6.
CentOS 5 Hardware :: Optimus Support Will OpenGL Still Work With Intel Gfx?
Mar 9, 2011My understanding is that there is no Optimus support for Linux at this time.Will a default CentOS installation work fine with just the integrated graphics.in other words, will Optimus and the discrete graphics be ignored? Will OpenGL still work correctly with the Intel integrated graphics?I am considering an i5-based laptop with Optimus support, where I might go with a dual-boot configuration.
View 1 Replies View RelatedUbuntu :: Turn On Graphics Chip
Feb 3, 2010I put Ubuntu 9.04 Linux on my computer a while ago and I found that my integrated graphics chip is going unrecognized. I've tried many ways to get it to "turn on" and be recognized, but nothing works
View 9 Replies View RelatedCentOS 5 Hardware :: Intel 865G X Graphics Card Will Not Display 1600X900
Mar 17, 2010I have a Dell Dimension 3000 with an integrated Intel 865g graphics card that I am trying to use in X on Centos 5.4 i386. The "810" driver (what Centos configures by default) works, but will not display at 1600x900. Strangely enough, it will actually work at higher resolutions such as 1600x1200, but 1600x900 fails, even with 915resolution and 855resolution. The "intel" xorg driver (included with Centos) locks up the entire machine when starting X, so thats a no go as well.
The "fbdev" driver works but, once again, won't display 1600x900, because that resolution doesn't work properly with the version of the intelfb kernel module that Centos bundles. Fedora Core 12 works perfectly fine at 1600x900 on the machine. I think that if I could get a newer xorg installation (or perhaps just a driver) going under Centos, it might fix the problem. I couldn't find any 3rd party repos containing such packages. I'd really rather run Centos on the machine, due to the package stability (yes, I see the irony here).
Fedora Hardware :: HDMI Output With Intel Chip
May 24, 2010I have just purchased a HP G62 Laptop, I connected up my TV to the laptop via HDMI out but it does not appear under the monitor list.
View 1 Replies View RelatedSlackware :: No Sound With HDA Intel On ICH7 Chip - AD198x
Dec 13, 2010I seem to have problems with sound on a ICH7 chip. the motherboard is an ASUS P5LD2-SE
The kernel is custom, but SND_HDA_* is included. and generally the sound device is identified properly.
Here is some relevant output of aplay -l and -L, lsmod and relevant part of lspci -vv
Quote:
Quote:
(what is this 'null' in the very beginning?)
Quote:
Quote:
I read this relevant thread: [url]
But my GPU doesn't have an HDMI output (and no sound module either). Note that I did see a similar msg
Quote:
To this one (of course it didn't include any nvidia references) but after running alsaconf, alsamixer, alsactl store once the msg vanished.
This thread didn't help either [url] as I'm running slackware64 13.1 on this pc and there are no newer alsa* package versions for me to install than the ones I already have.
Ubuntu Installation :: How Do I Find Out Details About Graphics Chip
Apr 23, 2010I'm trying to get 9.10 to work nicely on a Thinkpad Edge 14".Everything is working fine, except that I have issues with the intel graphics drivers.The monitor's native resolution is 1366x768 and I have Intel HD graphics card on it.I have changed my xorg.conf to use driver = "vesa", but now I get only a resolution of 1024x768.I tried to use xrandr to fix this, by adding a new mode etcetera, but this does not work - I believe because the driver is the issue.Also, doing Ctrl+Alt+F[1-6] gives me a blank screen rather than a console.
How do I find out the details about my graphics chip? Intel Corporation Arrandale Integrated Graphics Controller (rev 12)Maybe I should go more bleeding edge for my drivers? How do I do that?
OpenSUSE Hardware :: I7 Chip And Motherboard To Support It (8 Core)
May 22, 2010if OpenSuse 11.2 supports the new Intel I7 8 core chip and the motherboard (Intel DX580SO) on Linux Platform?
View 1 Replies View RelatedOpenSUSE Hardware :: 11.3 On Intel Core I5 With Integrated Graphics + Intel H55 Express Chipset
Aug 18, 2010! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
OpenSUSE Hardware :: Intel HD Graphics (Intel Core I3) With Suse 11.3 - Poor Resolution
Jan 2, 2011I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
Fedora Hardware :: Intel Graphics Card - Enable Desktop Effects - Graphics Just Crashes And Freezes
Jan 27, 2011I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
Debian Installation :: Radeon Graphics Chip - Jessie Requires Firmware-linux-nonfree
May 11, 2015If you have a Radeon graphics chip and upgrade to Jessie, install firmware-linux-nonfree, before rebooting.
My dist-upgrade to Jessie seemed flawless until I rebooted and couldn't get into X.
Seems Jessie boots into Gnome by default, but Gnome now requires 3-D acceleration. For my Radeon graphics chip (ATI Radeon 3100), this requires firmware-linux-nonfree, which I didn't need before and was not installed as part of the upgrade.
A boot message alerted me to this need.
I was able to get X going with xinit. I used FVWM; for XFCE I believe the command is:
xinit /usr/bin/xfce4-session -- :1
and from there I installed the package firmware-linux-nonfree.
Ubuntu Installation :: Dual Boot With An I8xx Graphics Chip On 10.04 - Get Black Screen Of Death
May 26, 2010I'm having no end of problems trying to get 10.04 onto my older Toshiba Satellite A50 laptop that I use as a spare laptop round the house. The laptop previously dual booted with XP and Xubuntu fine. I wanted to give Lubuntu a go to see if it's performance was better on this older hardware. When installing I got the black screen of death, and also got the same problem with the Xubuntu CD. Research pointed me in the way of this article: [URL] I was able to boot the Lubuntu Live CD using the instructions outlined in method A.
Once installed however I rebooted and Grub seemed to be knackered. Just sent me to a recovery console of which I had no idea what to do. As I could no longer boot into Windows either I reinstalled Xubuntu 9.10 and all was fine. I decided yesterday to give it another bash this time connecting to my wireless from the live cd hoping it would download an update to fix this problem. Nadda, Grub this time did show and I was able to boot into XP, but upon picking my Linux distro I now get an unrecognised device error with a long string of charachters and then it dumps be back into the grub menu, choosing the recovery mode version does the same thing.
CentOS 5 :: 5.5 Installs With No UI On A Laptop With Intel Integrated Graphics HD "Ironlake"
Dec 24, 2010I have Dell E6510 laptop with i5 CPU (Arrandale), Intel HD integrated graphics card (Ironlake), and 1080p display. I know other distros are also having problems with Ironlake but there are some work arounds.
Is there a way to install 5.5 on my laptop and have UI and 1080p resolution?
I have to say that 5.4 Live runs well - UI loads with correct resolution. With 5.5 live I get black screen.
CentOS 5 Hardware :: Intel Graphics Driver Driver Upgrading 5.4 To 5.5 I386?
May 16, 2010i upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)[code]....
and i solved the black screen problem changing the driver for i810
Section "Device"
Identifier "Videocard0"
Driver "i810"
EndSection
CentOS 5 :: Will 5.3 Support My X3100 Graphics Card And Bcm 4311 Wlan Card
Mar 30, 2009very much like everybody i am also waiting for centos 5.3, because 5.2 could not sit on my notebook due to obvious driver issues. would anybody tell if centos 5.3 support my x3100 graphics card and bcm 4311 wlan card?
View 5 Replies View RelatedOpenSUSE Install :: How Comes Centos Has Drivers For Raid Chip
Feb 3, 2011I have got a server which has a motherboard with nvidia mediashield raid built in, with Centos installed it picked up the raid 5 array that i had configured as one drive so the os install was straight forward. When i booted the netinstaller of opensuse 11.3 run though the setup, when getting to the partition setup is was picking up the three hdd as seperate drives and not one, so i got to a certain point and aborted the installation and i re run the installer, the raid status said the array was degarded or something which i knew there was nothing wrong with it as i had set it up only about 2 weeks ago and there was one drive missing aswell. So i removed the array and re configured the array and rebooted and the raid status said healthy again as it was before on centos, then i run the opensuse installer again and it went though the process again but completely stop at "Searching for linux partitions" , cursor was working fine , but nothing else was so i had to press reset.
This was my problem, i know kind of what the problem is, but what i want to know is , i thought opensuse is based on rhel same as centos but how comes centos has the drivers for the raid chip i have in my board and opensuse has not.
CentOS 5 Networking :: Ethernet Configuration For Marvell 88e8059 Chip
Sep 4, 2010I have built-in-motherboard Ethernet with this MArvell 88e8059 chip. During CentOS 5.5 install it didnt find it. then i found some page here on forums which said how to install sk98lin driver, and several people reported it working after that. Their chips were 8056 and others.. So i decided that should probably work in my case too, i installed it, and then i could see it in Network COnfiguration manager.
But during reboot, it cannot obtain IP information, and in Network Config manager it is "Inactive", setting it to Active fails to obtain IP again...
Debian :: Low FPS On Intel Graphics
Jun 28, 2015I just installed Debian 8.1 with Mate desktop environment. I have a laptop with Intel® HD Graphics 5500.When I try to play a game like Left 4 Dead 2 or Torchlight 2 I get extremely low FPS.I also have Ubuntu 14.04 Mate on another partition. The games run fine there.I don't understand why this big difference. Maybe I have to install or configure something..
View 4 Replies View RelatedHardware :: Add Intel NIC Support To Old Red Hat 9?
Apr 9, 2010I would like to add support for an Intel NIC to my ancient Red Hat 9.
I'm using RH 9 because I have old books that are specific to it.
The NIC is an Intel Pro/1000 GT Desktop Adapter. I have a 3Com NIC that is supported by RH 9, but I'd like to get the other gigabit NIC working under RH 9 for the speed and to learn how to swap out HW when needed.
I believe the driver for the NIC is located here:
[URL]
I have other, newer distros that I plan on looking at as well that I'm sure support the Intel NIC right at installation, but I thought this would be a great learning opportunity for me because I've had to replace and/or upgrade many NICs over the years in Windows machines, but I have no idea how to do such a simple task like that in Linux.
Fedora :: F13 Won't Boot With Intel Graphics?
Aug 18, 2010i previously posted a thread http:[URL].. that was regarding gaming issue, but now i got a bigger issue. i installed Intel 2010Q2 graphics package from [URL].. i first upgraded xorg-x11-server and related packages and installed devel package using yum.. later i compiled and installed kernel 2.6.34 and other packages included on [URL].. i rebooted the system and it showed display driver unknown so, i used system-config-display --reconfig and it detects my mobile 4 intel chipset. and when i reboot, GUI won't load .. when services finish loading screen goes blank and harddisk light blinks at constant intervals and i can't switch from GUI to CUI either using CTRL + ALT + F2 etc [URL].. PS i am able to login into single user and change xorg.conf
View 6 Replies View RelatedFedora Hardware :: Low FPS With Intel Graphics ?
Dec 13, 2010Purchased a slightly used T61 Thinkpad via a client of ours at work last week. I've been really happy with it so far, dumped 4GB RAM in it and have Vmware workstation running on it and all is well except the graphics drivers.
According to LSPCI the machine contains the device listed below.
Code:
X displays just fine and compiz works out of the box, but I'm only getting around 59 FPS with GLXgears. I do like to play the occasional game and what not, so i'm really hoping to get this increased. I've heard of running Tremulous on this card, so I imagine it can do it.
Is this low for this card?
General :: Do Intel HD 3000 Graphics Run Out Of The Box
Jul 29, 2011Do Intel HD 3000 Graphics run out of the box on Linux? Or do I have to do some manual work to get it working? Does Intel develop open source drivers?
Are they faster than on Windows?
This would apply for any Linux distribution.
Debian Multimedia :: OpenGL 3.3 For Intel HD Graphics?
Aug 31, 2015I have Intel HD Graphics video card on my laptop using OpenGL 3.0 with Mesa 10.3.2, but I need OpenGL 3.3.
Can I upgrade/enable OpenGL >=3.3 on Mesa for my GPU for Debian 8.1 Jessie? How can I do that?
Output of glxinfo | grep OpenGL:
OpenGL vendor string: Intel Open Source Technology Center
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.3.2
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
[Code] .....