CentOS 5 Hardware :: Intel 865G X Graphics Card Will Not Display 1600X900

Mar 17, 2010

I have a Dell Dimension 3000 with an integrated Intel 865g graphics card that I am trying to use in X on Centos 5.4 i386. The "810" driver (what Centos configures by default) works, but will not display at 1600x900. Strangely enough, it will actually work at higher resolutions such as 1600x1200, but 1600x900 fails, even with 915resolution and 855resolution. The "intel" xorg driver (included with Centos) locks up the entire machine when starting X, so thats a no go as well.

The "fbdev" driver works but, once again, won't display 1600x900, because that resolution doesn't work properly with the version of the intelfb kernel module that Centos bundles. Fedora Core 12 works perfectly fine at 1600x900 on the machine. I think that if I could get a newer xorg installation (or perhaps just a driver) going under Centos, it might fix the problem. I couldn't find any 3rd party repos containing such packages. I'd really rather run Centos on the machine, due to the package stability (yes, I see the irony here).

View 1 Replies


ADVERTISEMENT

OpenSUSE :: Kde 4.4.4 And Intel 865g Graphic Card?

Jan 16, 2011

I've got a problem to use intel graphic card and kde. When I enable opengl support it seems threa re refresh problems, botton now are visible, now not, it seems a blinking effect and when I move the pointer it seems kde try to re-draw the object but the object get invisible, so a relay mess. Xrender instead work but it's slow. Whit opensuse 11.2 all was ok. glxgears however shows me pretty good performance so I don't understand where is the problem.

View 7 Replies View Related

Fedora Hardware :: Intel Graphics Card - Enable Desktop Effects - Graphics Just Crashes And Freezes

Jan 27, 2011

I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:

I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution

Same problem I had with Fedora Core 12 and 13.

View 5 Replies View Related

Ubuntu :: Unable To Configure Display / Can't Choose 1600x900 On Either One?

Oct 7, 2010

Karmic 9.10 latest updates
Nvidia GeForce 6150 LE
Nvidia driver 185.18.36

Monitor Acer P205H - 1600x900 native

I can't configure the monitor. and the display.

I've tried with both the built in display configure and the Nvidia one. Can't choose 1600x900 on either one.

I either can't see all the display on the monitor, or it takes on some weird panning mode and looks like the display is about 2500x1500 or something.

Here's the xorg.conf file. Clearly it does not see the new monitor and the modes are wrong. These settings are for the previous monitor. How Can I fix this so that my display works properly? Thanks.

Windy

Code:
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
code....

View 1 Replies View Related

Fedora Hardware :: Intel Graphics Card - Don't Have 3D Support

Dec 1, 2009

Is there away to update my driver. In my Xorg.conf all I have under driver is "Intel" I am using an Intel GM45 card and I don't have 3D support.

View 14 Replies View Related

OpenSUSE Hardware :: 11.4 And Intel 8xx Graphics Card (i855 Gm)?

Mar 7, 2011

I would like to know if I will be able to work on my laptop with 11.4 , someone knows if something changed with hang/freeze issues? Currently I have installed 11.1 but since repositories were removed no updates or new software for me so I'm considering installing something new.

View 7 Replies View Related

Ubuntu :: How To Know If My Intel Chipset Graphics Card Is Installed

Mar 21, 2010

How do I know if my intel chipset graphics card thing is installed?.

View 1 Replies View Related

Ubuntu Multimedia :: Get Intel Graphics Card Working G31 / 33

Oct 21, 2010

Just spent about 4 hours upgrading from 9.10 to 10.04 thinking it would fix my graphics problems. Basically I have no 3d acceleration of any kind, is there any way i can load the intel drivers? Because what I'm using now is really crappy.

[code]...

Can i just change something in my xorg to intel and it will load that driver ? I've tried the "hardware drivers" thing but it does not show anything.

View 1 Replies View Related

Fedora Hardware :: Intel Graphics Card 82945G/GZ Can't Change Resolution On 12

Nov 22, 2009

After install F12 on a clean install, I can't change the display resolution, my graphics card is a Intel 82945G/GZ, my monitor is a LCD 32" TV

I follow this steps:

Quote:

Then I edit the xorg.conf file with this code:

Quote:

But nothing, I still get the 800x600 resolution and I can't change it.

Is this a driver bug?

View 14 Replies View Related

Fedora Hardware :: No 3D Acceleration On Intel Mobile 4 Series Graphics Card - 12

Apr 18, 2010

I'm a Fedora 12 user on an HP Pavilion dv4 laptop. I'm currently using kernel 2.6.32.11-99.fc12.x86_64, graphics driver xorg-x11-drv-intel-2.9.1-1.fc12.x86_64, and mesa 7.7-4. My graphics card is an Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07).

I've been having some problems getting my 3D acceleration to work. Although it worked correctly in Fedora 11, I have not been able to get it to work yet in Fedora 12.

The output of glxinfo shows:

Running glxinfo with LIBGL_DEBUG=verbose shows:

I found a similar message here: [url]

However, I'm not sure if this is the same problem I have. What does the drm_intel_bo_busy message mean?

View 6 Replies View Related

Debian Installation :: X Server Crashes On New Install On Intel I855 Graphics Card

Sep 13, 2010

I have just reinstalled testing on a Samsung Q30 and I cant get X to start. I am just left with a blank screen and ctrl+alt+Fn does nothing. I had a previous install of testing that worked fine but it might have been running a previous version of the kernel, or I had installed a bug fix to do with 915resoultion that I can't remember about. Booting off a Slax live cd works fine but I have had similar problems with Knoppix and Ubuntu.

I am running LXDE but I previously tried Gnome and had the same problem. Running xander displays cant open display Running dpkg-reconfigure xserver-xorg returns nothing, as does Xfree86 -configure There is no /etc/X11/xorg.conf or installed by default, I have tried running startx with a custom xorg.conf and the automatically generated one from -configure. The automatic one did not include any resolutions and was configured for a dual head set up although there was only one monitor connected.

I thought it may be the same problem as this:[url]

But I have tried following the bug fixes on that site and I have had no luck.

lspci

Xorg.0.log

View 1 Replies View Related

Fedora Installation :: Enable Desktop Effects With Intel On Board Graphics Card On 10?

Jan 16, 2009

How to enable Desktop Effects with Intel on board Graphics Card on Fedora 10?

View 1 Replies View Related

CentOS 5 :: Will 5.3 Support My X3100 Graphics Card And Bcm 4311 Wlan Card

Mar 30, 2009

very much like everybody i am also waiting for centos 5.3, because 5.2 could not sit on my notebook due to obvious driver issues. would anybody tell if centos 5.3 support my x3100 graphics card and bcm 4311 wlan card?

View 5 Replies View Related

CentOS 5 :: 5.4 Support Intel Q45 Graphics Chip?

Nov 18, 2009

Does CentOS 5.4 support Intel Q45 graphics chip? If it does not support, How do I install the driver manually?

View 1 Replies View Related

CentOS 5 Hardware :: Unable To Use Dual Monitor With Intel Hd Graphics

Nov 26, 2010

I've installed CentOS 5.5 64 bit on a Dell Latitude e6410. This model only contains Intel HD Graphics, not the extra Nvidia card you could also buy in addition. The getinfo output can be found here:[URL] Initially X11 did not work at all (blank screen), but using hints from other posts in this forum I was able to fix this by editing the file xorg.conf using the vesa driver, although I still do not get the native screen resolution of 1200x800 (I alwas get 1152x768).

Now I want to add an external monitor (Samsung Monitor connected via DVI, screen resolution 1680x1050). Unfortunately as soon as I try to configure the dual head mode using the system-config-display tool after restart of the X server there will be the the blank screen again. I tried various drivers with no luck.Has anyone succeeded setting up dual head on an Intel HD Graphics machine? I understand that this hardware is quite new and and would be easier to set up with more recent distros, but I would like to stick to CentOS, but cannot wait for CentOS 6.

View 1 Replies View Related

CentOS 5 Networking :: Can't Connect With Ethernet Card Intel 82801CAM (Centos 5.5)?

Sep 13, 2010

I've installed from the CD the Centos version 5.5. When I try to connect to Internet I can't because I received some errors. I've the Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller also a wireless slot (I've the wireless card DWL-G650+) When I turn on the pc and I go to "Ethernet Device", I see set: peth0 (Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) ETHERNET CONTROLLER) and also set "Bind to MAC address": fe:ff:ff:ff:ff:ff I've set manually the IP address (I'm under router). Status is "Active" but can't go on the Net. When I change to "eth0 (Intel EtherExpress/100 driver)...sometimes become "Active" an other times said that the MAC address is different or to check the cable because can't find the IP. What can I do?

View 5 Replies View Related

OpenSUSE Hardware :: 11.3 On Intel Core I5 With Integrated Graphics + Intel H55 Express Chipset

Aug 18, 2010

! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...

I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...

View 8 Replies View Related

OpenSUSE Hardware :: Intel HD Graphics (Intel Core I3) With Suse 11.3 - Poor Resolution

Jan 2, 2011

I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :

Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....

View 9 Replies View Related

CentOS 5 Hardware :: Looking For Compatible Graphics Card

Dec 25, 2010

Looking for some of the known compatible graphics card with Centos? A list of 20 - 30 cards would be nice. Ofcourse i'll need them to be new enough to find easily in any store.

View 6 Replies View Related

CentOS 5 :: 5.5 Installs With No UI On A Laptop With Intel Integrated Graphics HD "Ironlake"

Dec 24, 2010

I have Dell E6510 laptop with i5 CPU (Arrandale), Intel HD integrated graphics card (Ironlake), and 1080p display. I know other distros are also having problems with Ironlake but there are some work arounds.

Is there a way to install 5.5 on my laptop and have UI and 1080p resolution?

I have to say that 5.4 Live runs well - UI loads with correct resolution. With 5.5 live I get black screen.

View 8 Replies View Related

CentOS 5 Hardware :: Intel Graphics Driver Driver Upgrading 5.4 To 5.5 I386?

May 16, 2010

i upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)[code]....

and i solved the black screen problem changing the driver for i810

Section "Device"
Identifier "Videocard0"
Driver "i810"
EndSection

View 2 Replies View Related

CentOS 5 :: Graphics Card Can't Work After The System Resume From 'suspend' Mode

May 18, 2009

My computer have ATI X600 graphics card installed, and I installed CentOS5.3.

Every time I suspend my computer and then resume it, it seem the graphics card can't resume and the monitor says 'no signal', but the system still responses, I can use keyboard.

Is there any configuration I can't do to make it resume normally? I've searched a lot in Google but can't find out any one else run into the same problem.

Information about the card:

Quote:

View 5 Replies View Related

CentOS 5 Networking :: Can't Install Card For Intel DG41TY - Missing Dependency: Kernel(net_core)

Mar 12, 2009

I have been able to load CentOS on my computer. I have the motherboard DG41TY from Intel. It seems that the only problem I have is my network card does not work. On the Intel site there is a link to download the network driver for Linux. I did that. It's an rpm file. realtek-r8169-kmp-default-8.004.00_2.6.16.60_0.21-0.i586.rpm is the name. When i right click and say install it tried to connect to the internet for some thing and fails. of coarse it does there not loaded yet. I added a second nic that cent did recognize and got me online. I want to load the on board driver and remove the add on card. When I try to load now I get missing dependencys.

[Code]....

View 3 Replies View Related

General :: Make PCI-E Graphics Card Visible To Ubuntu When The Motherboard Has Integrated Graphics?

May 2, 2010

I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:

Integrated graphics
PCI graphics
PCI-Express graphics (PEG)

I set the BIOS on PEG, but

I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says

Current usage: Unknown

There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!

Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?

View 1 Replies View Related

Ubuntu / Apple :: Does Recognize The Intel Card And Can Use It Over The NVidia Card

Sep 16, 2010

I have been waiting on installing ubuntu on my mid 2010 MBP 15' for a while now. I was wondering if the dynamic GPU switching was supported yet. Does Ubuntu recognize the intel card and can I use it over the nVidia card?

View 1 Replies View Related

Debian Hardware :: Graphics Card Is Overriding Built In Sound Card

Sep 5, 2011

I just bought a new graphics card and installed it. it works perfectly although my sound worked perfectly this morning and I think the graphics card is overriding my built in sound card. I need help fixing the sound. The graphics card I bought is an ATI Radeon Cedar HD 5450 The sound I want to use is HDA VIA VT82xx
when I run alsamixer I get Card:

HD-Audio Generic
Chip: ATI R6xx HDMI

[Code]....

View 3 Replies View Related

Ubuntu :: VGA Code For 1600x900?

Jul 8, 2011

What is the VGA=XXX code for 1600x900?

Currently I have vga=791 but I'd like to increase the boot splash res.

View 1 Replies View Related

Debian :: Low FPS On Intel Graphics

Jun 28, 2015

I just installed Debian 8.1 with Mate desktop environment. I have a laptop with Intel® HD Graphics 5500.When I try to play a game like Left 4 Dead 2 or Torchlight 2 I get extremely low FPS.I also have Ubuntu 14.04 Mate on another partition. The games run fine there.I don't understand why this big difference. Maybe I have to install or configure something..

View 4 Replies View Related

Fedora :: F13 Won't Boot With Intel Graphics?

Aug 18, 2010

i previously posted a thread http:[URL].. that was regarding gaming issue, but now i got a bigger issue. i installed Intel 2010Q2 graphics package from [URL].. i first upgraded xorg-x11-server and related packages and installed devel package using yum.. later i compiled and installed kernel 2.6.34 and other packages included on [URL].. i rebooted the system and it showed display driver unknown so, i used system-config-display --reconfig and it detects my mobile 4 intel chipset. and when i reboot, GUI won't load .. when services finish loading screen goes blank and harddisk light blinks at constant intervals and i can't switch from GUI to CUI either using CTRL + ALT + F2 etc [URL].. PS i am able to login into single user and change xorg.conf

View 6 Replies View Related

Fedora Hardware :: Low FPS With Intel Graphics ?

Dec 13, 2010

Purchased a slightly used T61 Thinkpad via a client of ours at work last week. I've been really happy with it so far, dumped 4GB RAM in it and have Vmware workstation running on it and all is well except the graphics drivers.

According to LSPCI the machine contains the device listed below.

Code:

X displays just fine and compiz works out of the box, but I'm only getting around 59 FPS with GLXgears. I do like to play the occasional game and what not, so i'm really hoping to get this increased. I've heard of running Tremulous on this card, so I imagine it can do it.

Is this low for this card?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved