Software :: Pure Data Installation On Fedora 11 ?

Aug 31, 2009

I've just tried to install PD on fedora 11 by downloading it and following this list:

Quote:

When I start PD by typing "pd" in the terminal I get the following error:

Quote:

View 2 Replies


ADVERTISEMENT

Ubuntu Installation :: Remove Pure-ftpd Pure Admin - Getting A 530 Authentication Error

Mar 24, 2011

I am having problems troubleshooting my pure-ftpd setup. I am always getting a 530 authentication error. I attempted to correct the problem by doing the following:

# pure-pw mkdb
# ln -s /etc/pure-ftpd/conf/PureDB /etc/pure-ftpd/auth/PureDB
# gedit /etc/pure-ftpd/conf/PAMAuthentication

[code]....

This create a new error. 421 Unable to read the indexed puredb file (or old format detected) - Try pure-pw mkdb I am getting a feeling this is getting from bad to worse. I attempted to remove pure-ftpd and pureadmin to start over again. However, it appears I cannot remove everything. I attempted the following:

apt-get remove pure-ftpd pureadmin I am not sure what this really does because I can still see the folder /etc/pure-ftpd and I cannot remove it. I could not use rm /etc/pure-ftpd because the system said it was not empty. I also tried sudo aptitude remove pure-ftpd pureadmin . Again I cannot completely remove the folder. How do I completely remove pure-ftpd and pure admin and all databases, files and folders so I have a fresh system ready to start the install again?

View 1 Replies View Related

Software :: Pure-authd Not Passing Variables To Pure-ftpd

Feb 9, 2011

I have set up pure-authd and pure-ftpd. They are both running, I have created the socket etc.

In my authentication module (a php script) for testing purposes I have done a vardump in to a file, and have realised that pure-authd is not passing on any variables (username, password of the current person trying to log in via ftp) to the PHP script.

I am sure the authentication module is working (have tested it vigorously on the command line), but after 10 hours wondering why it wouldnt work and messing about with the script, I have realised that the variables were never even getting in to the script in the first place!

I am running the processes such as this:

Everything seems as if it is working other than this. For instance, when testing the setup with a very basic auth module which doesnt require a username or password (the basic module just passes "auth_ok:1" to pure-ftpd and the user is then logged in), I can log in to the FTP server fine.

But like I say, a vardump ($argv) on my proper PHP authentication script would suggest that no username or password are being passed to it.

View 1 Replies View Related

Ubuntu Multimedia :: Pure Data - CSound And Supercollider - Create My Own Effects And Synths And Use Them In My Composition

Jun 19, 2010

I'd like create my own effects and synths and use them in my composition. I googled around and I discovered a lot of language (graphical and not) to create sound and music. But I don't understand if they can be used to create (with wrapper or indirectly) VST FX and instrument. I need to create something that can be impoted in Cubase and having a basic GUI to change its setting and attribute!

I think SuperCollider is cool, but it looks not to create something importable via VST... Am I wrong?

What about CSound and Pure Data?

View 1 Replies View Related

Fedora Servers :: Pure-ftp Welcome Message

Nov 13, 2009

I am having problems with the welcome message regarding pure-ftp, this is on Fedora 10. Pure FTP just doesnt show any ability to change the default message, its rubbish at its default gives out some details of what I am running (security risk in itself). Is there any means of being able to make a custom message?

View 4 Replies View Related

Fedora X86/64bit :: Possible To Keep X64 Instalation PURE 64 Bit

Jan 25, 2010

I'm very new to Fedora ( i want to install it again on my PC ) but i have a small question before i proceed.Is it possible to keep a x64 instalation PURE 64 bit ?I mean here, will fedore try to install a 32 bit library ?? or ONLY if i need them ?Because for example openSuSe will install 32 bit libraries right from the start

View 5 Replies View Related

Fedora :: Authentication Failure On Pure-ftp Server ?

Apr 16, 2011

OS=FC14 x86_64
DM=Gnome

I've installed pure-ftp, and the firewall is open on port 21, the router has port forwarding.

I can connect to this machine, from my smart-phone and a laptop using its IP Address 77.xx.xx.xxx

I'm getting user OK but its not accepting my password or one I just made on another account

This is whats happening:-

What layer of extra security is stopping this working, as the guy attempting access is trying to send a file to big to attach to an e-mail.

View 1 Replies View Related

Server :: Pure-FTPD - With-uploadscript On Fedora 10

Dec 16, 2009

I am running an FTP server using Pure-FTPD which was a migration from an OS-X workstation to Fedora 10 - VMware esxi.

This was done for various reasons but the reason for choosing the Pure-FTPD app was due to an easier migration.

The system has been migrated for about a month and works very well. I installed it on the server using yum install pure-ftpd, configured it and imported all the accounts [about 150 accounts] so this is all fab. however we now want to see if we can get an upload notification.

This has lead me to look at the uploadscript option in pure-ftpd. we use virtual users and the pure-pw file.

The Problem:

When we set the directive

Code:

The ftp server hangs, I cant seem to see how to get this to work, from my investigation I think the issue is that the yum install is not building the app " --with-uploadscript " i have tried to do a hand install on a test Fedora 10 VM, I downloaded pure-ftpd-1.0.27.tar.gz and unpacked it, did a ./configure --with uploadscript then a make and make install, nothing reports any errors but it doesnt seem to install anything. I can start the server from a command line but there are no config directories ? and even after creating a new user and a passwd-mkdb i cant log in to the server. but that most likely as i dont have a full configuration. but i can t find where to put the configuration files.

View 1 Replies View Related

Ubuntu Installation :: Pure LXDE Borked Xsession Autologin?

Nov 28, 2010

Installed 10.10 Ubuntu and found the Dell D820 did not digest Gnome that easily. I tried adding Lubuntu from repos after adding PPA. Seemed unstable to use, so I followed Psychocat direction for Pure LXDE and removed Ubuntu. Now login is giving error "xsession:unable to launc "openbox-gnome" X Session --- "openbox-gnome" not found; falling back to defaultsession." Where do I correct the xsession login to allow auto login. (I know the chances for autologin, and still choose to use it)

View 7 Replies View Related

Red Hat / Fedora :: Change Folder Permission In PURE-FTPD

Aug 11, 2010

I installed pure-ftpd with Mysql in my fedora 12. In have the following value in my pure-ftpd.conf file

# Cage in every user in his home directory
ChrootEveryone yes

It was created the user folders with permission 644. But i need to change this to 775 at the time of creating the folder.

ie,

the folder was created now

-rw-r--r-- 1 peter peter 1131291 Apr 15 22:31 random-file

I need to change [ rw-r--r-- ] to [ drwxrwxr-x ] at the time of creating the folder.

View 3 Replies View Related

Fedora Installation :: Recovering The Data After The 'update'?

Jul 27, 2009

I started some months ago with Fedora 10, installed (on a barebones hardware package) from a DVD I got with a magazine. I liked it, and it worked fine. When 'Update Available' messages arrived, I installed the updates. When Fedora 11 arrived the same way, I installed that, a few weeks ago, and it, too, was working fine. A few days ago another 'Update Available' message arrived, and I installed it, unfortunately without backing up first. There was a message then that said to restart computer (which was still working fine).

I restarted the computer, and it would go as far as the moving blue bar across the bottom, then stop with a blinking cursor on a black screen. After trying several things, including the recovery part of the original DVD, I put a different, clean drive in the computer and reinstalled Fedora 10 from the original DVD. What I was hoping is that I could then install the original drive as a secondary one and get access to the files on it.

View 14 Replies View Related

Fedora :: Data Recovery After Installation Not Successfull?

Sep 20, 2010

It's my first time i switched to linux (fedora13) and i wanted to check out ubuntu10. Started installation but somehow (stupid!) selected not the right harddrive to install new system from an iso dvd. Well installation was not successfull, because not the right drive was selected.I came back to fedora but my "storage" harddrive that i had all my collected data and projects is lost. Basically it's like new formated and some files from the ubuntu 10 are on it. None of my files. Is there any way to recover it back? I don't even have a clue how do you install software to fedora13?(I'm a newbee that was sick and tired using and upgrading windows - so now mac OZ and linux)

View 7 Replies View Related

Fedora Installation :: Restore My F13 System And - Or Data?

Jun 8, 2011

I have just foolishly used live media to install F14. Pre-upgrade of F13 to 14 repeatedly failed. Sadly I used the use all available space option rather than the free space. As a result I have a working FC14 system but no data from my F13 installation. Is there any way to restore my f13 system and/or data?

View 3 Replies View Related

Fedora Installation :: Update - Error Getting Repository Data

May 5, 2010

I have just installed Fedora on my laptop. I tried to install the updates but there is something wrong:

Code:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)

View 2 Replies View Related

Fedora Installation :: Other Drives Recognized But Data Not Found

Mar 20, 2011

I installed fedora on one of my three hard drives and it seems that something went wrong with the other two. Fedora recognizes the other drives but it seems the data on those drives is not there anymore. The below images are screen shots from my computer folder and disk utility program. I tried to look through Fedora documentation but I did not find a solution to my case.

View 14 Replies View Related

Fedora Installation :: How To Protect Previous Personal Files/data

Jan 26, 2010

When I install Fedora 12, I tried to use manual partition like before. But installation failed somewhere. So I have to accept Fedora 12's default partition. Once I experienced slow login problem. I have to reinstall. But the reinstallation would delete the previous installation. Is there a good way to keep personal files intact on reinstallation?

View 1 Replies View Related

Fedora Installation :: Update F11 Without Risk Of Losing Data Info

Nov 24, 2010

I 've some problems with my current version 11 that probably has been fixed in the last version (14). I've updated other non-critical systems through the yum services but from 13 to 14. I've a productive workstation working on ver.11. Is there any possibility to update through yum or other methods through without risks of losses data information?... It's really complicated to backing up Mysql databases, web services and other hundreds things installed. I know, it's convenient carry out a backup but is it a higher risk to dump from 11 to 14 trying to keeping the information inside?

View 4 Replies View Related

Red Hat / Fedora :: Retrieve Data From Hard Disk After Installation On The System?

Aug 17, 2009

I have never used Linux before and know nothing about it . But my cousin installed a Fedoro linux CD on my laptop which previously had Lotus symphony . Unfortunately my laptop had single partition and so Linux overrode the old OS ,ie lotus symphony .

I have some critical data on my hard disk but I have no clue how to take backup this data using Linux . I desparately need this data .

Could somebody let me know how I can access this data and take the backup ?

View 4 Replies View Related

Fedora Installation :: Missing Data In Logical Volume /work After Upgrade From F9 To F10

Jan 10, 2009

I've just upgraded from F9 to F10. I can boot okay but I seem to have lost some data in one of my logical volumes. My drive is organised as follows:

/dev/mapper/main_group-various: UUID="f7c452cf-9f03-4f97-8676-b71b07a812aa" TYPE="ext3" SEC_TYPE="ext2"
/dev/mapper/main_group-root: UUID="173f1845-72c9-49e8-9d49-2a5776c4267c" TYPE="ext3" SEC_TYPE="ext2"
/dev/mapper/main_group-music: UUID="f5411861-4614-4652-a5f5-a3a8c2efcdd3" TYPE="ext3" SEC_TYPE="ext2"

[code].....

The logical volume for work still seems to be there. I presume (and hope) that all the information in /dev/main_group/work is still there. How can the folders in /dev/main_group/work be retrieved?

View 1 Replies View Related

Fedora Installation :: Broken Partition Table - Cause Significant Data Corruption ?

Jul 24, 2009

During a recent request to install fedora 11, I ran into an interesting problem. It seems that between fedora10 and fedora11, the developers switched from fdisk, to parted for creating the initial pre-mke2fs partition table creation.

It looks like the implementation of this is broken, as it's writing the partition table with overlapping cylinder boundaries. While this can sometimes be ignored, it can in certain cases cause significant data corruption.

On an installation I took it through, using the latest installation media, in both manual & automatic partition creation, the layout looked like this:

The last two partitions turn out fine, for some reason. However, those two partitions should not have overlapping cylinders. After my very first installation, the system was completely unbootable, and not even fsck wouldn't rescue it. If this is possible, then that means that a system that's been online for months or even years could simply drop out of functionality simply due to a byte or two of system-critical data falling on that last cylinder. Considering that a lot of the time kernel data ends up on /dev/sda1 (commonly the /boot partition), this is something that should not be ignored.

View 4 Replies View Related

Fedora Installation :: Error Updating Evolution Backend Data Server

Jun 26, 2010

I got this error during updating backend data server for evolution. "could not do simulate: gnome-panel-2.30.0-1.fc13.i686 requires libedataserver-1.2.so.11 : Success - empty transaction"

View 2 Replies View Related

Fedora Installation :: Unable To Update - Skipping Security Plugin (No Data)

Aug 8, 2010

When I am installing texlive package power gone suddenly. From that time onwards yum update command is not working. It is giving error as follows:

Loaded plugins: presto, refresh-packagekit, security [URL]: [Errno 14] HTTP Error 404 : [URL]
Trying other mirror.
Skipping security plugin, no data
Setting up Update Process
Resolving Dependencies
Skipping security plugin, no data
--> Running transaction check
--> Processing Dependency: libkpathsea.so.4 for package: evince-dvi-2.30.3-1.fc13.i686
---> Package texlive-kpathsea-doc.noarch 0:2010-8.svn19287.fc13 set to be updated
--> Finished Dependency Resolution
Error: Package: evince-dvi-2.30.3-1.fc13.i686 (@updates)
Requires: libkpathsea.so.4
Removing: kpathsea-2007-51.fc13.i686 (@updates)
Available: kpathsea-2007-49.fc13.i686 (fedora)
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest

I already tried this commands but again I have problem:
yum-complete-transaction first
rpm -e texlive
yum install libkpathsea.so.4

View 2 Replies View Related

Fedora Installation :: Setup Dual Bood Data Partition And Move /home?

Feb 21, 2009

I have just spent dome time using gparted to sort out my partitions. I have a vista partition, a fedora one and a big chunk of unallocated space I wish to use as my data drive.

I want to move my ~ folder to the new partition and have windows/vista access the folder and write to the Documents, Downloads folders etc.

What is the best format to use?

Also I plan to start backing up my partitions to a server, for instance using g4l to save a linux image (maby a windose one too). Is there any benifit in keeping all the hidden files (ones starting with period '.') i.e moving the whole ~ folder or would I be best off leaving the ~ dir and moving the folders I know i use such as ~/Downloads, ~/Documents etc?

And how should i preform the move of all these files? 'mv'? do i need to add any special options?

View 3 Replies View Related

Fedora Installation :: New Install Selections To Preserve User Data In Logical Volumes?

Apr 1, 2009

I have Fedora Core 8 installed. I would like to reinstall it so as to get back commands that have been lost. To preserve my user data that has been stored in logical volumes, what selections should I make in the installation process? Are these selections essentially the same for Fedora Core 10?

View 5 Replies View Related

Fedora Installation :: Lost All Data On Drive By Bad Clicks - Change User To Root?

Jul 21, 2009

This is my 6th install of Fedora, begining with Fedora 4 I have had very good luck with all until 9 and I lost all data on drive by my bad clicks in a frustrated session. Now I have a great install of Fedora 10 with the exception that I fouled up and typed in a user (myself-'andybill') and am finding out that the work I need to do cannot be maximized by operating in user - andybill, I need to be super user. I have just moved and have not done any collaboration with our senior partner in a data development start up that he is the intellectual property in deed and law. For me to get back on track my using this OS I have to be master of all libraries, drivers etc. I am a nu-b (only 2 1/2 years, with no computer science background. This explains why I need step by step commands without abbriviated lingo-So if I can remove myself as andybill, make all root

View 13 Replies View Related

Debian Configuration :: How To Run Pure Sid

Jun 23, 2011

I am a long time aptosid user which asked to many question in there forum. Everyone interested: [URL] Anyway eat shit and die is not quite the answer I was looking for. I want to stay with a Debian and a rolling release, so I was wondering if some of you could share some info's on howto best setup and run pure sid.

View 9 Replies View Related

Ubuntu :: Getting Back To Pure Gnome

Nov 18, 2010

EDIT: The way the ubuntu forums formatted it made it easier to understand, and I installed the misisng packages. So I installed kubuntu plasma desktop, so that I could try KDE, and decided I didn't like it. So I followed the psycho cat tutorial here on [URL] "Getting back to pure gnome on Ubuntu" I copy and paste the code there, and it starts uninstalling, but then I get this:

Code: Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following packages have unmet dependencies:

libaccess-bridge-java : Depends: default-jre but it is not going to be installed or openjdk-6-jre but it is not going to be installed or sun-java6-jre but it is not going to be installed E: Broken packages I have absolutely no idea what to do. I know it has something to do with missing dependencies (anyone could, if they read the code) but I don't know what to do.

View 2 Replies View Related

Debian :: Transform LMDE Into Pure Squeeze?

Nov 13, 2010

I am having some good time with Linux Mint Debian Edition, but I want to transform it into Debian Squeeze. In my installation, I've just 7 minty packages, the rest are from debian repo. have a detailed look here [URL] and suggest me debian replacements of those 7 minty packages.

View 6 Replies View Related

Ubuntu Servers :: Pure-ftpd DontResolve Being Ignored?

Apr 12, 2011

I'm really confused with this one. Yesterday our FTP cluster went down, i havent yet tracked the reason but i suspect a security update killed it as automatic updates are enabled (i will be turning those off now!).

Anyway, FTP connections were receiving a 425 Sorry, Unable to resovle error message, i sound the solution to be to disable dns lookups with the DontResolve > yes option.

but for some unknown reason this is only working on my failover box! when i restart pure-ftpd on the primary box the command switch -H is missing?

i've done the same thing on both boxes by creating a file in /etc/pure-ftpd/conf called DontResolve and editing it to just read the word 'yes', been over it and checked for spelling mistakes and i cant find any reason why its ignoring the option?

View 2 Replies View Related

General :: Start Up A Net Connection With Pure Terminal?

Mar 26, 2010

I type in ifconfig eth0 up, it says Device not found.

Sys: Fedora12, ethnet, laptop.

When I can get in X, I can manage my network with network-management, or with gnome-terminal. In X, I can start a net with "ifconfig eth0 up", when I type in "ip link", It shows like

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:26:22:de:c0:94 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 00:26:c6:4f:79:2a brd ff:ff:ff:ff:ff:ff

BUT right now, I get problems with X and can't get in it. I want to start a net connection in pure terminal and work with it. However, it replys "Device not found" to "ifconfig eth0 up". Answer to "ip link" was lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 and no more. Where is my eth0 then? How can I start a net with it?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved