I have just foolishly used live media to install F14. Pre-upgrade of F13 to 14 repeatedly failed. Sadly I used the use all available space option rather than the free space. As a result I have a working FC14 system but no data from my F13 installation. Is there any way to restore my f13 system and/or data?
View 3 Repliesprobably did something stupid.. just haven't figured out what yet.. hope someone can point me in the right direction. daughters computer broke, maybe virus, so i did clean reinstall of xp. decided to give her a couple of linux distros, thinking maybe they are safer for when she is surfing..
Used gparted to repartition hd:
Partition table entries are not in disk order
Installed Ubuntu 8.04. was then able to boot into either ubuntu or xp. next installed fedora 10. new menu.lst did not show ubuntu, only fedora and xp. had some lockups in fedora, and had to pull plug to reboot 2 or 3 times. replaced power supply. added ubuntu into menu.lst. boots into fedora and ubuntu fine. tried to boot xp, and get "Preparing System Recovery Option", then PC Angel appears, and it wants me to use the system restore option for xp.
Is there something i can do to recover xp without having to wipe the hd and reinstall xp, then reinstall ubuntu and fedora (and if i do all that, how can i be sure i don't end up with the same problem?
I had i a dual boot win. 7 and ubuntu 9.10,recently i had some problem in my windows os so i restored the c drive to factory settings since both operating systems where in c drive so when i tried to boot grub was showing problem.the information displayed was loading grub, the file does not exist rescue grub> so what should i do to restore grub so that i can boot again into windows 7 and ubuntu without loosing my data.
View 1 Replies View RelatedI have never used Linux before and know nothing about it . But my cousin installed a Fedoro linux CD on my laptop which previously had Lotus symphony . Unfortunately my laptop had single partition and so Linux overrode the old OS ,ie lotus symphony .
I have some critical data on my hard disk but I have no clue how to take backup this data using Linux . I desparately need this data .
Could somebody let me know how I can access this data and take the backup ?
I am trying to restore my system to Ubuntu 10.10, using a system backup made with REMASTERSYS. When I reboot, I get the message: GRUB error:15 I found many threads discussing this issue, most notably here: [URL]
[Code]....
are there any sweeper / cleaner apps which can take back my installation as to when it was new. I know home directory could have config files etc..but that doesnt matter, i want all packages and applications reset to how it was when i had a clean install. I am using Natty
View 2 Replies View Relatedbefore i go and get rid of wubi for the real deal, i would like to know if i can get rid of ubuntu by doing a system restore. i never mind doing system restores and i have my recovery disks if needed.
View 5 Replies View RelatedOK, so about a week ago or so my Ubuntu 10.04 install no longer recognizes my iPod Touch or Iphone. I have had no luck getting them to work. i REALLY do not want to fresh install Ubuntu. Is there a way I can like repair or restore (a la "Window$") that will fix the OS itself without removing any programs or settings?
View 9 Replies View RelatedI updated 9.10 and system crashed during update and is now unbootable. It seems to freeze (or is just taking a really long time) at fsck. Is there any way to make my computer usable again without reinstalling the whole OS?
View 5 Replies View RelatedI would like to find out how to back up a complete Ubuntu system, and then restore it on a clean harddisk.I have been running dual booting with Win XP until now. I am running Ubuntu 10.04, but have installed quite few add-on. I would like to make an Ubuntu-only machine now, with all the same apps still there, but dont want to go and download everything again. I am looking for a way I can back this entire Ubuntu installation up, and then restore it to a clean drive.
View 2 Replies View RelatedI recently had to restore my system via clonezilla due to hdd failure. I frequently back up my /etc/apt folder as well as some other configuration files and settings that I use in my system to bring my restored image up to date with my ever changing preferences, etc.
I noticed the problem when I replaced the etc/apt folder with my backup version. After replacing the folder, I ran 'sudo apt-get update' and imported a list of all my previously installed software. Then I ran 'sudo apt-get upgrade'. I didn't get any errors at all during any part of the update and upgrade process.Then this popped up in my panel, and won't seem to go away.
I have accidentally removed my /boot partition(when installing grub using LiveCD i'm typing "rm -rf /boot" instead of "rm -rf boot") After that i have installed grub, have to reinstalled latest kernel(2.6.29.6-217.2.3.fc11.i686) using rpm(and 2nd time using yum) but result the same: i can't boot into my system. Unfortunately, i can't copy&paste log, but booting stopped after something like a:
mounting /proc
mounting /sysfs
Creating /dev
then kernel finds keyboard and mouse and... and nothing. Is it possible to restore my system without reinstalling distro?
On my laptop I dual boot Ubuntu 8.04 and Windows XP. During the last upgrade of my Ubuntu distro something went wrong and now I get a messed up GUI. In the meanwhile I got a new laptop on which I only run Ubuntu 9.10. So my question is: I want to delete the linux partition on my old laptop and use only Windows XP but since I use grub to dual boot, I'm afraid that deleting the linux partition and extending the Windows partition will cause problems to boot my computer.
Here's a screenshot of my partitions:
I have a laptop with 250 GB SATA HD that has the following:
Win7 Pro installed first with sda1=system reserved partition, sda2=C: drive, sda5=separate software application programs to differentiate from Windows' Program Files. Ubuntu 9.10 was installed next (sda6=common swap partition for all Linux distros, sda7=Ubuntu root, sda8=Ubuntu home). Then Opensuse 11.2 was installed with sda12=root and sda13=home. Finally FedoraCore11 was installed with sda9=boot, sda10=root and sda11=home. Ubuntu and Suse have grub loader in their own root partitions.
Suse's grub menu controls all OS's. From this grub menu I can select Windows or any other Linuxes. Suse uses legacy grub because it was installed right after Ubuntu 9.10 which uses (legacy) grub.
Here is opensuse's grub menu:
# Modified by YaST2. Last modification on Wed Mar 31 11:49:28 EST 2010
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader
default 1
[Code]....
Somehow I also messed up Windows' boot file and boot partition table. Now I am still trying to use Windows installation CD to repair Windows but it has taken several hours and am still waiting for screen response. I cannot boot into any Linux distro either.
I have an installation from USB/DVD issue.
Setup:
1. Desktop running WinXP
2. Lenovo S10e netbook running Win7RC1 (just expired.) no DVD drive.
3. 1 DVD by Novell and Lenovo with "SUSE Linux Enterprise Desktop 10 (For recovery select Restore System from the initial Menu.) November 2008"
4. 4GB USB drive. Laptop can boot from it.
Problem:
Need to install the system to the Laptop using the USB drive. Doesn't install.
What I did:
Mostly followed the guide at "Installation without CD - openSUSE.htm" my USB drive is G:
used the HP USB Disk storage format tool to make my USB bootable.
Copied all files from the dvd to the usb drive
Moved G: ooti386loader* to G:
Deleted E: isolinux.bin
Renamed E: isolinux.cfg to E: syslinux.cfg
Downloaded syslinux-3.85.zip from [kernel.org]
Extract syslinux-3.85.zip to c: syslinux
CD'ed to c: syslinuxwin32 directory in a cmd prompt
Ran syslinux -ma E: .....
Result:
Runs all the way through, gets to a windowed program called ">>> Linuxrc v3.0.20 (Kernel 2.6.22.5-31-default) <<<" Code: could not find the openSUSE Repository. Activating manual setup program
Main Menu: Settings, System Information, Kernel Modules (Hardware Drivers), Start installation or System, Verify Installation CD-ROM/DVD, Eject CD, Exit or Reboot, Power off Cant find anything on the usb drive (obviously?) so what do I do now?
This is where I'm at and quite stuck... not sure what other flags there are to use, what I have to move around or rename.
Is it possible to backup and restore the system files of fedora 10_x86_64 so that if there will be any problem at OS , I can easily recover it from the previous backup files?
View 1 Replies View RelatedThis question has been raised several times I am sure but...
I would like to create a FULL recovery CD/DVD of my system with a boot restore...
Any recommended for Ubuntu 10LTE Server.
we have a customer that ran a sudo chmod +x -R * command on his / filesystem by mistake and now the machine cannot be accessed on the network Has anyone any idea what chmod command to run to restore the system to its original state ?
View 1 Replies View RelatedMy Mini13 came with hardy preloaded, and it's got pretty messed up since, so I'd like to restore factory OS via a grub entry that looks like this:
title System Restore
root (hd0,2)
chainloader +1
boot
This points to a partition which, when mounted, has this stuff in it:
bootfs.img initrd0.img install.sh logo.png syslinux.cfg vmlinuz
boot.msg install.cfg ldlinux.sys rootfs.img vesamenu.c32
I'm not a computer, but that looks pretty good to me but when I select this grub option it just says:
Boot Error
Is there a log or something that might give me more info about the error?
This is a good way to backup my current system:
How to backup your system to restore your server incase the hard disk is damaged.
I have two disks from a old computer (now it doesn't exist anymore). They were in raid 1 with this configuration:
Code:
----------------
| disk 1 | disk 2
----------------
| OS
----------------
| |
| raid 1 | raid 1
| |
----------------
There is probably an error in one of the two disks, however raid 1 should allow we to restore data. So now I can physically mount this disks on a machine with ubuntu (ubuntu is on another disk). My question is: how can I restore data from disks? I think that using mdadm is not enough.
I regularly take pgdumpall from production database and restore staging database. Production database size is 4.5 GB. After restoring the staging database size is incremented.
The following command is used to restore pgdumpall file.
psql -U postgres -f dbdumpall
My aim is to sync up production database and staging database.
I have create a LVM volume in mirror 1 method, with two hard drives, In that one disk is get failed. How can I manage the data availability and also what I need to do next?
View 3 Replies View RelatedI have three hard drives that were previously in a Debian server setup to use LVM that I now need to access data on. The first hard drive had a boot partition along with an LVM partition, the other two hard drives were also LVM.From what I remember I have to mount all three at once for LVM to function correctly but I don't have available hardware (particularly a motherboard that can mount all old IDE).Can I use a USB<->IDE converter to image the disks, and then mount them?What Linux distro should I set up to recover the data?ow do I know what version of LVM is needed?
View 1 Replies View RelatedIve installed ubuntu for the first time today, i have a hdd of 500gb, that had 65gb occupied with music, movies and games.
What i did during installation:
it asked me where to install it, so i created a new partition of 100gb ext4 type, to install it there, and i was going to leave the rest for the data, but it wont let me do it, so i went back and selected the "exchange type swap linux 0x82 type" for the 400gb partition.
Then installed it, and now i cant find my data, and i have only 100gb of space in the hd, if i use the "disc utility" i can see the other 400gb, and change partition type, but i dont want to lose my data..
I've occasionally changed HDD filesystem type in Disk Utility from NTFS to Linux Extended . It created an extended partition containing some other partitions instead of NTFS.
View 3 Replies View RelatedI'm using Webmin, and Webalizer plugin. Days ago, webalizer works fine. But starting from yesterday, Webalizer no longer generate reports. And when I try to generate report manually using webmin, I get this message: Code: Running Webalizer to generate report from [URL]..
.. Webalizer failed! See the output above for details. Because I didn't get any details on that message, I run webalizer manually using command:
Code: # webalizer -n mydomain.com And as result, I got this message:
Code: # webalizer -n mydomain.com Error: Unable to restore run data (10) I have few domains in this machine, and for all domains I got the same result. Anyone has any idea(s) about what happened and how to cure it? Few days ago I think I tried to install Perl-Small-XML using CPAN and failed. And I installed awstats too. Don't know whether it's related or not.
This is to request assistance or information as to why the evolution application will not accept the evolution-backup-tar.gz file from a previous version.
Situation: I upgraded by way of a fresh install from openSuSE 11.2 to 11.3 (GNOME desktop).
Before upgrading, I produced the above mentioned backup file so that I could import all the mail, addresses etc. into the new application.
Result: it does not work. The process starts up seemingly normal but then simply sits there forever with the message "evolution shuts down" - but it does'nt. I have to kill it to stop it.
I am looking forward to a resolution since it would be a real pity if I lost the mail history.
I was putting the cover back on my Antec p180b, and I guess it got stuck and gave it a hard bump (pretty much broke the cover). As a result, one of my hard drives, a Seagate Barracuda ST3750640AS, got messed up or something. All the other hard drives are fine. It's in an LVM with another hard drive, so now I can't boot up into my computer. So I booted into the installation CD:
Code:
# find /dev/sd[a-c][1-3]
/dev/sda1
/dev/sda2
[code]....
This led me to believe the partition was messed up. So I ran cfdisk, and it said something about a missing partition table or something. Additionally, instead of showing the single partition on it, it displays, from my recollection, Pri*Log. To my knowledge, this is the only problem with the hard drive. So now I need to either somehow create or restore the partition table without overwriting the data. Or get a new hard drive, and some how recover the data (LVM, partitions, and all).
How can I restore the data inside the trash after make it empty ?I need to restore an important folder from the trash and I can't find it there.I am using openSUSE11.1 (KDE)
View 8 Replies View Related