I am having problems with the welcome message regarding pure-ftp, this is on Fedora 10. Pure FTP just doesnt show any ability to change the default message, its rubbish at its default gives out some details of what I am running (security risk in itself). Is there any means of being able to make a custom message?
View 4 RepliesI am having problems troubleshooting my pure-ftpd setup. I am always getting a 530 authentication error. I attempted to correct the problem by doing the following:
# pure-pw mkdb
# ln -s /etc/pure-ftpd/conf/PureDB /etc/pure-ftpd/auth/PureDB
# gedit /etc/pure-ftpd/conf/PAMAuthentication
[code]....
This create a new error. 421 Unable to read the indexed puredb file (or old format detected) - Try pure-pw mkdb I am getting a feeling this is getting from bad to worse. I attempted to remove pure-ftpd and pureadmin to start over again. However, it appears I cannot remove everything. I attempted the following:
apt-get remove pure-ftpd pureadmin I am not sure what this really does because I can still see the folder /etc/pure-ftpd and I cannot remove it. I could not use rm /etc/pure-ftpd because the system said it was not empty. I also tried sudo aptitude remove pure-ftpd pureadmin . Again I cannot completely remove the folder. How do I completely remove pure-ftpd and pure admin and all databases, files and folders so I have a fresh system ready to start the install again?
I have set up pure-authd and pure-ftpd. They are both running, I have created the socket etc.
In my authentication module (a php script) for testing purposes I have done a vardump in to a file, and have realised that pure-authd is not passing on any variables (username, password of the current person trying to log in via ftp) to the PHP script.
I am sure the authentication module is working (have tested it vigorously on the command line), but after 10 hours wondering why it wouldnt work and messing about with the script, I have realised that the variables were never even getting in to the script in the first place!
I am running the processes such as this:
Everything seems as if it is working other than this. For instance, when testing the setup with a very basic auth module which doesnt require a username or password (the basic module just passes "auth_ok:1" to pure-ftpd and the user is then logged in), I can log in to the FTP server fine.
But like I say, a vardump ($argv) on my proper PHP authentication script would suggest that no username or password are being passed to it.
I'm really confused with this one. Yesterday our FTP cluster went down, i havent yet tracked the reason but i suspect a security update killed it as automatic updates are enabled (i will be turning those off now!).
Anyway, FTP connections were receiving a 425 Sorry, Unable to resovle error message, i sound the solution to be to disable dns lookups with the DontResolve > yes option.
but for some unknown reason this is only working on my failover box! when i restart pure-ftpd on the primary box the command switch -H is missing?
i've done the same thing on both boxes by creating a file in /etc/pure-ftpd/conf called DontResolve and editing it to just read the word 'yes', been over it and checked for spelling mistakes and i cant find any reason why its ignoring the option?
I am having trouble to "aptitude install pure-ftpd-mysql" with my ubuntu server 9 version.
[Code]...
I just upgraded to mediawiki-1.16.4-58.fc13.x86_64 on my fedora box and did:
Code:
Now I get 403 Forbidden message when I access.
I find several config files related to mediawiki, and modified them, but I still see 403.
I'm very new to Fedora ( i want to install it again on my PC ) but i have a small question before i proceed.Is it possible to keep a x64 instalation PURE 64 bit ?I mean here, will fedore try to install a 32 bit library ?? or ONLY if i need them ?Because for example openSuSe will install 32 bit libraries right from the start
View 5 Replies View RelatedOS=FC14 x86_64
DM=Gnome
I've installed pure-ftp, and the firewall is open on port 21, the router has port forwarding.
I can connect to this machine, from my smart-phone and a laptop using its IP Address 77.xx.xx.xxx
I'm getting user OK but its not accepting my password or one I just made on another account
This is whats happening:-
What layer of extra security is stopping this working, as the guy attempting access is trying to send a file to big to attach to an e-mail.
I am running an FTP server using Pure-FTPD which was a migration from an OS-X workstation to Fedora 10 - VMware esxi.
This was done for various reasons but the reason for choosing the Pure-FTPD app was due to an easier migration.
The system has been migrated for about a month and works very well. I installed it on the server using yum install pure-ftpd, configured it and imported all the accounts [about 150 accounts] so this is all fab. however we now want to see if we can get an upload notification.
This has lead me to look at the uploadscript option in pure-ftpd. we use virtual users and the pure-pw file.
The Problem:
When we set the directive
Code:
The ftp server hangs, I cant seem to see how to get this to work, from my investigation I think the issue is that the yum install is not building the app " --with-uploadscript " i have tried to do a hand install on a test Fedora 10 VM, I downloaded pure-ftpd-1.0.27.tar.gz and unpacked it, did a ./configure --with uploadscript then a make and make install, nothing reports any errors but it doesnt seem to install anything. I can start the server from a command line but there are no config directories ? and even after creating a new user and a passwd-mkdb i cant log in to the server. but that most likely as i dont have a full configuration. but i can t find where to put the configuration files.
I've just tried to install PD on fedora 11 by downloading it and following this list:
Quote:
When I start PD by typing "pd" in the terminal I get the following error:
Quote:
I installed pure-ftpd with Mysql in my fedora 12. In have the following value in my pure-ftpd.conf file
# Cage in every user in his home directory
ChrootEveryone yes
It was created the user folders with permission 644. But i need to change this to 775 at the time of creating the folder.
ie,
the folder was created now
-rw-r--r-- 1 peter peter 1131291 Apr 15 22:31 random-file
I need to change [ rw-r--r-- ] to [ drwxrwxr-x ] at the time of creating the folder.
Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies View RelatedI install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
I'm trying to get messages sent to an alias to invoke a ruby script.Looking at the postfix log the message is being delivered, but I believe the script isn't being run with sufficient permissions.Quote:
Jun 3 18:31:21 hostname postfix/local[12968]: 340B911A3B4: to=<email@domain.com>, relay=local, delay=0.24, delays=0.2/0.01/0/0.03, dsn=2.0.0, status=sent (delivered to command: /var/mailscripts/script)
[code]....
I am new to ubuntu and I'm trying to set up an vps, but I cant manage to get past the first screen where I have to fill ip and port 22. When I click open, it says connection refused.
View 4 Replies View RelatedI am a long time aptosid user which asked to many question in there forum. Everyone interested: [URL] Anyway eat shit and die is not quite the answer I was looking for. I want to stay with a Debian and a rolling release, so I was wondering if some of you could share some info's on howto best setup and run pure sid.
View 9 Replies View RelatedI installed lighttpd to be able to view cgi files that display the status of my UPS. For the most part is has worked w/o incident i.e. until recently when the UPS battery failed on my APC backups xs 1500 lcd. I could not view the multimon.cgi file via the localhost or 127.0.0.1 url e.g.: [URL]... I'd get 404 page not found message. After checking links here and on the web, I tried: [URL]... The page is displayed. From this discovery, I'm not sure that this is a web server configuration or a network host configuration issue or what. I'm running Lucid with all updates, no mods to lighttpd except I added the mod_fastcgi line to the lighttpd.conf file
View 7 Replies View RelatedI am trying to share files between Windows XP machine, ubuntu server, debian server and ubuntu desktop. But mainly between ubuntu server and Windows XP computer.I also like to learn samba, because probably I could do all this with ftp server as well.I set up and configured samba following the instruction on Online Ubuntu Server Guide.But when I run the command:sudo /etc/init.d/samba restartI get:bash: /etc/init.d/samba: No such a file or directory I don't know what is wrong?
View 9 Replies View RelatedI am in the www-data group...
Code:
mike@webserver:/var/www$ groups mike
mike : www-data adm dialout cdrom plugdev lpadmin sambashare admin
when I run ls...
Code:
mike@webserver:/var/www$ ls -la
total 8
drwxrwxr-x 2 www-data www-data 4096 2011-04-22 09:30 .
drwxr-xr-x 14 root root 4096 2011-04-20 18:22 ..
-rw-r--r-- 1 root root 0 2011-04-22 09:24 index.html
I assumed that means that the users in the www-data group can read, write and execute within this folder?
But when I try to create a new file/dir I get permission denied message.
I'm having fun messing around with my new LAMP server, but this problem is annoying me now .
(Oh and the index.html file was created by root, it's a blank file and can be deleted)
EDIT: The way the ubuntu forums formatted it made it easier to understand, and I installed the misisng packages. So I installed kubuntu plasma desktop, so that I could try KDE, and decided I didn't like it. So I followed the psycho cat tutorial here on [URL] "Getting back to pure gnome on Ubuntu" I copy and paste the code there, and it starts uninstalling, but then I get this:
Code: Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following packages have unmet dependencies:
libaccess-bridge-java : Depends: default-jre but it is not going to be installed or openjdk-6-jre but it is not going to be installed or sun-java6-jre but it is not going to be installed E: Broken packages I have absolutely no idea what to do. I know it has something to do with missing dependencies (anyone could, if they read the code) but I don't know what to do.
I am trying to get vsftpd started on my server. I followed the steps outlined here: [url] but for some reason, the daemon is not starting or throwing an error message.
After making all of the changes to vsftpd.conf, if I execute the following commands, here is the result:
I go and restart ssh and I get this weird message. thought I should be getting ok or fail message, at least thats how I remember it. What do you think?nate@universal-mechanism:~$ sudo service ssh restart
View 3 Replies View RelatedI am having some good time with Linux Mint Debian Edition, but I want to transform it into Debian Squeeze. In my installation, I've just 7 minty packages, the rest are from debian repo. have a detailed look here [URL] and suggest me debian replacements of those 7 minty packages.
View 6 Replies View RelatedI type in ifconfig eth0 up, it says Device not found.
Sys: Fedora12, ethnet, laptop.
When I can get in X, I can manage my network with network-management, or with gnome-terminal. In X, I can start a net with "ifconfig eth0 up", when I type in "ip link", It shows like
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:26:22:de:c0:94 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 00:26:c6:4f:79:2a brd ff:ff:ff:ff:ff:ff
BUT right now, I get problems with X and can't get in it. I want to start a net connection in pure terminal and work with it. However, it replys "Device not found" to "ifconfig eth0 up". Answer to "ip link" was lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 and no more. Where is my eth0 then? How can I start a net with it?
I write the below sample program named "h1.asm"?
Code:
assume cs:code
code segment
mov ax,0B800H
[code]...
1. In Windows platform +MASM 5.0, run "command" and use "debug.exe" to see what would happen. As step by step check, I see B800:000 is not modified as expected.
2. In Ubuntu 10.04 + dosemu 1.4.0.1, run the program in two ways:
a. If exec dosemu in command line as "$dosemu -dumb", yes, it's in shell mode. and then use debug to check, "B800:0000" can be modified as expected.
Code:
"Welcome to dosemu 1.4.0.1!"
D:masm>debug h1.exe
-r
AX=0000 BX=0000 CX=000F DX=0000 SP=0000 BP=0000 SI=0000 DI=0000
[code]....
b. If exec dosemu in command line as "$dosemu", and run the program again, the symptom is as same as 1.(pls see attachment picture).
3. In Windows, I replace "mov ax,0B800H" to "mov ax,2000H" and try again, it would be edited well. So I wonder if it is coursed by "B800" segment address.
I need to write a module in pure assembler.Now the linker needs symbols out of the kernel library to link to ( module_init, module_exit, printk).Does anybody know the kernel library name, or are these symbols only in the compressed kernel image (vmlinuz) ?And if, how can I link to a compressed kernel image ?
View 6 Replies View Relatedwhy another slackish distro? Mine (will be) better than most Please try it before you criticize it It is quite unique in many ways I really did it to show how easily one can make their own 12.2 install into a live distro So, it is a proof-of-concept thing Desktop: My own JWM creation heavily based off Vector's JWM Display manager: Slim from Slackbuilds Packages: All pkg's are 12.2 slack, sbopkg's, and slapt-get/gslapt from Slacky, some others converted from absolute/salixos/source. I custom built the JWM desktop, systray-volume-control, and many from-scratch scripts.
Heres some of the pkg's Games: Xgalaga sbopkg Graphics: Gimp, Imagemagick Office: Abiword, Gaiksaurus, Xcalc Multimedia: Mplayer, XMMS, Audacious, Alsamixergui, Pulsaudio Alsaplayer, Isomaster Misc: Roxterm,rox-filer, PCMANFM, lxterminal, lxtask, leafpad xarchiver, catfish, lxappearance, nitrogen System: Gparted, ddrescue, testdisk, Gnome net tools, WICD wifi-radar, Gslapt, Network: Firefox, dillo, xchat, gftp, grsync
[Code]...
Here's the background info -- I recently installed Ubuntu server 8.04 on TWO machines that are exactly identical.On one machine, all seems perfect.On the other, when I execute "/etc/init.d/samba status" it always shows that smbd is NOT running.But it would seem that it IS running, since I can access the shares I've set up without difficulty either from smbclient on the server or from the windows boxes on the network.ps ax lists smbd as a process as well.The log tells me nothing -- it just reports that samba started. No errors. Not much of anything in there. And if I execute smbstatus, that works just like you'd expect.since the two machines are identical (and I mean exactly the same), and only one is doing this.
I guess I should be happy since they both work (seemingly perfectly).But it still bothers me that I'm getting the message that smbd isn't running on one of them. I tried uninstalling samba and reinstalling it on the machine giving me the erroneous (?) status message. But that changed nothing.Right now there's no data on the machine, and it's not in production, so just doing a bare metal reinstall of the OS is an option. But I'd like to understand what's happening.
I am trying to send an email by sendmail (ubuntu) to external servers, but unable to send. following is what i am trying to do and what i got the response:
sendmail -v xxx@hotmail/gmail.com < mail.test
where mail.test contains
[COLOR="rgb(105, 105, 105)"]
From: bla@bla.com
[code]....
I'm attempting to upgrade the BIOS in an ASUS 1005HA netbook. The netbook runs SuSE 11.3, and no other OS. All the BIOS utilities on from ASUS are Windows or DOS based. ASUS has a utility titled afudos that apparently flashes the programmable ROM. Running afudos using the dosemu utility suggests that one needs to create a DOS boot drive, execute afudos during a reboot with the new ROM image located on the drive.
How does one accomplish said task on a netbook without a floppy disc drive? Do I create a bootable DOS USB flash drive that contains just afudos and the new bios flash rom upgrade? And if so, how does one do this? As a side issue, it looks like all the major motherboard vendors do not support Linux. That is, all the motherboard drivers require Windows or DOS.