Ubuntu Multimedia :: Pure Data - CSound And Supercollider - Create My Own Effects And Synths And Use Them In My Composition
Jun 19, 2010
I'd like create my own effects and synths and use them in my composition. I googled around and I discovered a lot of language (graphical and not) to create sound and music. But I don't understand if they can be used to create (with wrapper or indirectly) VST FX and instrument. I need to create something that can be impoted in Cubase and having a basic GUI to change its setting and attribute!
I think SuperCollider is cool, but it looks not to create something importable via VST... Am I wrong?
What about CSound and Pure Data?
View 1 Replies
ADVERTISEMENT
Feb 25, 2011
I downloaded it from packman and it's not working. I tried loading some old projects from when I was working Cecilia in Xandros, but they don't load. I tried loading .wav and .aiff files, but they don't load. Unfortunately, this app is useless, but it worked perfectly in Xandros (which is useless). Is there a particular repository I should be tapping instead of packman for Cecilia/Csound? Maybe this app is just plain outdated.
View 5 Replies
View Related
Nov 18, 2010
Would like to know if there are any Linux app that I could use to compose/edit music. It should be able to work audio and MIDI files, and put my music work on paper.
View 5 Replies
View Related
Aug 31, 2009
I've just tried to install PD on fedora 11 by downloading it and following this list:
Quote:
When I start PD by typing "pd" in the terminal I get the following error:
Quote:
View 2 Replies
View Related
Mar 24, 2011
I am having problems troubleshooting my pure-ftpd setup. I am always getting a 530 authentication error. I attempted to correct the problem by doing the following:
# pure-pw mkdb
# ln -s /etc/pure-ftpd/conf/PureDB /etc/pure-ftpd/auth/PureDB
# gedit /etc/pure-ftpd/conf/PAMAuthentication
[code]....
This create a new error. 421 Unable to read the indexed puredb file (or old format detected) - Try pure-pw mkdb I am getting a feeling this is getting from bad to worse. I attempted to remove pure-ftpd and pureadmin to start over again. However, it appears I cannot remove everything. I attempted the following:
apt-get remove pure-ftpd pureadmin I am not sure what this really does because I can still see the folder /etc/pure-ftpd and I cannot remove it. I could not use rm /etc/pure-ftpd because the system said it was not empty. I also tried sudo aptitude remove pure-ftpd pureadmin . Again I cannot completely remove the folder. How do I completely remove pure-ftpd and pure admin and all databases, files and folders so I have a fresh system ready to start the install again?
View 1 Replies
View Related
Feb 9, 2011
I have set up pure-authd and pure-ftpd. They are both running, I have created the socket etc.
In my authentication module (a php script) for testing purposes I have done a vardump in to a file, and have realised that pure-authd is not passing on any variables (username, password of the current person trying to log in via ftp) to the PHP script.
I am sure the authentication module is working (have tested it vigorously on the command line), but after 10 hours wondering why it wouldnt work and messing about with the script, I have realised that the variables were never even getting in to the script in the first place!
I am running the processes such as this:
Everything seems as if it is working other than this. For instance, when testing the setup with a very basic auth module which doesnt require a username or password (the basic module just passes "auth_ok:1" to pure-ftpd and the user is then logged in), I can log in to the FTP server fine.
But like I say, a vardump ($argv) on my proper PHP authentication script would suggest that no username or password are being passed to it.
View 1 Replies
View Related
Nov 25, 2015
i need create a DVD data from shell.I try this but nothing: # genisoimage -V "DVD1" -R -hide-rr-moved -J DVD1_Shapter1_8/ | wodim -v -eject dev=/ dev/dvd1 -the folder only contain 8 video in .mpg extension,
View 1 Replies
View Related
Mar 10, 2010
This is 16 bit / 44100 Hz sample. Try to plyback this sample in your favorite music player, and after that try to use command "play SB_test.wav". You see, second part of this file sounds very differently. This is because all your 44100 Hz audio resampled 48000 Hz. It's ok if you watch DVD's (48000 Hz audio), but nasty if you listen CD-Audio (44100 Hz), DVD-Audio or Blu-ray (24 bit / 96000 Hz and 192000 Hz). My question is: how to playback audio with different characteristics without resampling?
View 9 Replies
View Related
Mar 25, 2011
I'm trying to install supercollider following this guide: [url]
And I'm completely stuck on installing Planet CCRMA at Home. The guide says update your computer with PackageKit, KPackageKit. I believe I have both installed but cannot see them in the applications menu. Where can check?
Next the guide says: Run the following command in a terminal window: su -c 'rpm -Uvh
View 3 Replies
View Related
Mar 7, 2010
I decided to install a few programs for multimedia design on regular ubuntu karmic. I installed such programs as cSound, Ensribe, LightSpeed, Nyquist. However, i cannot find them in the applications menu. I know they are installed (along with dependencies as they are listed as installed in the package manager). how programs work on this is still in construction.
View 9 Replies
View Related
Feb 9, 2009
Where can I see which buttons create the visual effects (Nvidia)? eg. cube .
View 2 Replies
View Related
Jul 15, 2010
after updating from 11.2 to 11.3 I am no longer able to enable desktop composition.
On 11.2 I fixed this via installing the Nvidia driver, sadly when trying that on 11.3 it tells me there is some issue with my Kernel version. I have found a thread suggesting to install the 195... nvidia driver version, but that results in the same Error.
What driver do I need or how can I fix this?
My sysinfo:
OS Information
OS: Linux 2.6.34-12-xen i686
System: openSUSE 11.3 (i586)
KDE: 4.4.4 (KDE 4.4.4) "release 2"
[Code]....
View 9 Replies
View Related
Jan 19, 2009
Looking for a Open Source music composition editor similar to Sibelius. I found and settled on Rosegarden. Sound card is Creative Audigy 2 Platinum EX. I also have a midi keyboard which I would like to use with rosegarden. After downloading rosegarden, I found out in order to use the MIDI sequencer, I have to compile and install a real time kernel.
I finally got my kernel configured and installed, recompiled all the video/Ethernet drivers etc (after about a dozen tries ) Now on to the issue... As root, I can run the JACK audio server with realtime priority (as it is needed by Rosegarden) with the command
jackd -R -dalsa &
it starts up and seems to run. Then as a regular user, I try to connect to the JACK audio server using the qjackctl application. Qjackctl loads, but cannot seem to connect to the jack server, giving me the message "UNABLE TO CONNECT TO SERVER AS CLIENT"
HOWEVER, using the same procedure above as root, I can connect to the jack audio server with qjackctl. Rosegarden will start as a regular user but will also not connect to the JACK audio server (therefore: no sound or midi sequencer) Ive tried running Rosegarden as root (I didnt like having to do that), but get a similar error.
Through some googling, I�ve found that JACK clients (qjackctl, rosegarden etc.) must be executed by the same user who launched the JACK server. -- no problem...Except I cannot run a realtime application as a regular user. I read online that regular users can start realtime applications using the LSM module (whatever that is, I couldn�t find all that much).
how do I start the jack audio server in realtime mode as a regular user? if that is not possible...Is there a way to configure JACK so that it is started by root, but allows clients launched by regular users to connect?
View 9 Replies
View Related
Nov 6, 2010
I am usin ubuntu 10.10 and I want to create a new particion for storaging data. I have root, home and swap particion but I need one more like data storage. How can I create it during instalation.
View 1 Replies
View Related
Apr 7, 2010
I have a 160gb hard drive with no partitions. Ubuntu runs on the entire disc. I want to cut off 60gb from my file system as a storage drive without losing the data that i already have on it.
I don't want to reinstall Ubuntu and cannot afford to lose all my data. Is it possible to do so, without having to reinstall the OS.
I downloaded Gparted, whats next?
View 5 Replies
View Related
Aug 18, 2010
how can i get all the effects in csm? i have install csm but i dont have all effects.
View 2 Replies
View Related
May 30, 2011
I am working in Redhad linux, how to create Data source Name in Linux..
View 1 Replies
View Related
Apr 3, 2010
The only API i have found for something like this is gdk_bitmap_create_from_data. But it requires XPM data, not raw. So, how can i make a bitmap from raw 'char[x*y/8]'?
View 3 Replies
View Related
Sep 3, 2010
I did all my editing in after effects, and I'd rather not have to learn a hole new program, so if there is anything similar that would be great.
View 3 Replies
View Related
Mar 30, 2011
I can't find the option for 3d sound, such as "Speaker Fill" in Realtek Control Panel for windows. I searched in sound preferences, alsamixer and pavucontrol with no result. 5.1 surround sound for movies is working good, so there is no problem with hardware or compability with ubuntu, I think. What should I do? "Speaker Fill" is very useful option.
View 3 Replies
View Related
Jul 24, 2011
kubuntu 11.04
I just installet pitivi, but see no tab with video effects. I have gstreamer with plugins and frei0r filters installed.
View 1 Replies
View Related
Mar 23, 2011
This is VL Chowdary, a software engineer in Bangalore,India.I am currently working on a project that deals with "Creation of Postmortem data log file on Linux platform".The project is on Fedora 12 with Kernel2.6.31.5 version.For that i need following things.1. Find the location of core utility in the kernel.2. Find the source file that consists of actual implementation of the core utility (On Fedora's kernel 2.6.31.5)3. Based on that i want to implement a core file with my own project requirements.4. Build the kernel with the above implemented corefile replacing the existing one.I couldn't get the source file that contains the implementation of core utility.
View 2 Replies
View Related
Apr 17, 2011
i want to create multiple cd's containing the data of one tar.gz file of course i can use data dump (the dd command) to cut the tar.gz into 700 MB pieces. yet then i must calculate the exact location where to cut, and use the skip, seek and count parameters to proceed. Does anybody here know, software that automatically creates 700 MB parts of a single file?
View 2 Replies
View Related
Mar 8, 2010
GNU/Linux kernel 2.6 Suppose I have 7.5GB file a I want to create two DVDs with it as simple data. Can I do this? And how do I retrieve the file afterwards?
View 4 Replies
View Related
Jul 6, 2010
I have an HP Proliant DL380 G6 server (relatively new), and I can't enable desktop effects. I'd think even a recent integrated GPU would be able to do this right? Why can't I do it?
View 4 Replies
View Related
Jan 1, 2010
I have a software RAID array using mdraid that consists of two 1.5TB drives that I use for storage, the array is mounted at /Storage. I am running out of space in the array so I ordered two more 1.5TB drives to create a 4 drive RAID 1+0 array which will be 3TB big. My question is how do I create the new array and not lose any data?
The drives and partitions are sdc1, sdd1, and soon to be sde1, sdf1. I currently have 4 RAID arrays (md0,md1,md2,md3). I think I can create the RAID 1+0 array with the two new drives, copy the data from my current array to the new one, remove the old array, then add the two original drives to the new array. But I wanted to ask on here first to make sure my data doesn't go poof.
View 1 Replies
View Related
Nov 15, 2010
Suppose I have a 80 GB hard disk (sda) with 4GB of contents. Using a dd to copy to a different disk
Code:
dd if=/dev/sda of=/dev/sdb
copies all the contents (including free space). So sdb also needs to be 80GB.
You will notice that in VMWare or VirtualBox disk images, it is possible to set the disk to use only the amount of space of actual data. So a 80GB virtualbox/vmware image with 4GB of contents will be 4GB.
Is it possible to do that with an actual hard disk (sda) image? I want to create an image of an actual hard disk, copy it to DVD and transport it (in mail) for restoration on another computer (having same hard disk).
View 6 Replies
View Related
Nov 24, 2010
i'm trying to create simple form that will also upload only xml data. first, the user will need to upload an xml document only by clicking submit, the data will be posted to the server and the user will be redirected to uploader.php. This PHP file is going
to process the form data and do all the work.
PHP Code:
[code]....
View 1 Replies
View Related
Feb 27, 2010
I like my wobbly windows, love 'em. Recently on the latest ATI manual driver update they went away. From boot, log into desktop, my pidgin window defaults to open. Can move it for about 1.5 seconds and be wobbly then the screen does it's reinitialize thing and the window becomes non-wobbled again. At any time I can go to System > Preferences > Appearance > Visual Effects and enable the effects and they work without issue. So, start up with visual effects, something right away turns them off, I can turn them back on at any time and they will stay on. I don't think its actually anything to do with my graphics cards drivers - those seem to be fine. Rather I believe it is a Gnome setting somewhere. I have tried setting my Visual Effects to None, rebooting setting them back to where I like them and rebooting again in case it was a corrupted setting.
View 7 Replies
View Related
Mar 2, 2010
back when I was Windows Vista (the pre-installed OS on my laptop), whenever I would activate my webcam through skype, I separate program would also initiate. This program would give me the ability to alter the image, like black and white, fish-eye, etc.Is there anyway to get skype to activate cheese webcam so I can use its effects?
View 3 Replies
View Related
