Fedora Installation :: Setup Dual Bood Data Partition And Move /home?
Feb 21, 2009
I have just spent dome time using gparted to sort out my partitions. I have a vista partition, a fedora one and a big chunk of unallocated space I wish to use as my data drive.
I want to move my ~ folder to the new partition and have windows/vista access the folder and write to the Documents, Downloads folders etc.
What is the best format to use?
Also I plan to start backing up my partitions to a server, for instance using g4l to save a linux image (maby a windose one too). Is there any benifit in keeping all the hidden files (ones starting with period '.') i.e moving the whole ~ folder or would I be best off leaving the ~ dir and moving the folders I know i use such as ~/Downloads, ~/Documents etc?
And how should i preform the move of all these files? 'mv'? do i need to add any special options?
I have a computer with windows xp on it, and i want to dual boot with fedora 11. I have 2 hard drives in it, 1 500gb HD and 1 350gb HD. the 350 isnt much concern b/c its just sitting there all free and unpartitioned right now. Now my 500gb is split into 3 partitions, a 20gb(with xp installed on it) a 105 gb with pretty much nothing on it and a 350gb with all my data.
My problem is I'm trying to resize my 20gb partition through the fedora 11 installer and when I tell it to resize say to 10gb it starts and fails the resize. its a NTFS partition and the windows stuff on the partition is only about 8gb. any idea whats going on? the only error I get is "The resize has failed"
I want to move my home directory to a separate partition so I can install the new versions of Ubuntu without losing my data. And while I'm at it, what other important directories should I move to separate partitions? And how do I do it? I'm guessing that the /boot directory should also be moved to its own partition too, yes? Because it has the GRUB in it, and if I removed Ubuntu to make way for a newer version of Ubuntu, I'll just get an error because the computer can't find the GRUB that doesn't exist anymore, right? And also, if I move those important yet-to-be-listed directories to their own separate partitions, how large should those partitions be?
I don't want to miss out on the upcoming Lucid Lynx (If it will work in the first place, of course ) By the way, I have an Ubuntu-Windows XP dual-boot system. I'll attach a screenshot of my partition table from GPartEd. You can see that I have about 300 GB. The largest partition is Ubuntu.
I just installed F13 x86_64 on a system that used to be running Windows 7.
The boot drive is a SATA drive attached to the motherboard which is working fine.
However, my data drive is an NTFS partition filling a 3.6TB SATA raid.
It's GPT--Gparted sees 3 unknown partitions, and gdisk shows:
Code:
How do I mount this in Fedora 13? I had intended to shrink the NTFS partition so that I can create an ext4 partition to move the data to. Will this be possible?
I've got a LOT of valuable data on this drive, and nothing else big enough to store it.
Been digging around and not finding anything that quite works.
Background: I had an existing 10.10 install and 10.04 on another partition. When I installed the 10.04 I told it to use the existing /home partition which is also being used by the 10.10 install. All good, both users have directories with all their data in the same /home partition.
Issue: So, as the 10.04 was 32bit (experimenting but another story) I decided I would replace with 10.04 64bit. All went well except when I did the manual partitioning I screwed up and instead of setting the existing /home partition to 'use but don't format' - which I think is what I must have done last time - I left it as 'don't use and don't format'. So, obviously, now the new 10.04 install has its /home inside /, which I don't want. I want it on the existing /home partition as it was with the previous 10.04 install.
Question(s): Is there any simple(ish) way of doing this without a reinstall? Not a major problem as I have only just installed and can do it again without losing anything but time, but I would like to figure out a way to do it without if possible.I want to essentially move the /home/user directory (rather than the /home) and make it /media/home/user inside the existing partition. Seems easy enough on the surface but becomes involved as I investigate.Ubuntu 10.04 minimal install with Xfce DE.
Is there a way to setup a separate /home partition during a new installation of Ubuntu? If so, how. I've found guides about how to do it after installation, but it seems there ought to be a way to do it that way from the very beginning.
I have a home directory which is mounted on the LVM partition,How can i reduce the size of LVM partiotion without loosing the data on home directory...whenever i use lvreduce command it show me a warning mesg that the whole data will be lost...reducing the size of LVM partition without loosing my home directory data.
I have created 5 partitions:2 GB ext320 GB ext310 GB ext320 GB ntfs400 GB ntfsI have already installed XP on 20GB ntfs. Will dual boot work if I use the 3 ext3 partitions to install Ubuntu?
i have an acer aspire one with a 250 gb hdd the hdd is currently partitioned into two parts part 1 - 85 or so gb, has windows installed part 2 - the rest which is currently unallocated. i am trying to install ubuntu so that each has its own section and will dual boot once in the ubuntu installation window, how do i set up the partition to achieve this? i am trying to install ubuntu 10.10 netbook
I am running ubuntu 11.04 I'd like to encrypt my home folder. - how can it be done, without creating new user/starting from scratch. -I'd like to keep all the files and desktop settings - the only change should be that the folder is encrypted now.
I am installing a custom 8.04 live disk (basically, a mirror of my whole system with user data intact, sans all non-OS files) from a USB key with remastersys for the .iso creation, and UNetbootin for the bootable USB on a brand new 120GB PATA WD HDD. Both do nicely so far, so I have a working livedisk to use until I need to install Ubuntu to the drive.
I had a pure linux box, but I need to add XP with dual booting now- I have to use Autodesk Inventor 2010 software for my college class on my laptop, so I don't drive 30 miles to use the 1 computer lab equipped with that software. I'm not new to Linux, but I am new to more in-depth partitioning. I've taken the lead and looked into things- read this good guide, among others:
HTML Code: http://www.psychocats.net/ubuntu/partitioning and noticed that there is a way to more deftly use partitions so that personal files can be shared access and write between Windows and Linux partitions- with this: HTML Code: http://www.fs-driver.org/ Ubuntu is still my main OS, but being able to access all my media/data files between the 2 systems would be nice. Problem is, until now, I've put everything on a single partition because I didn't know better. Now I do, but am a bit confused with all the guides as to what's most efficient, especially in my case where full RAM speed is crucial to running a single program.
Here's what I know I need to do: 1. The Windows XP install I know needs from 20-30GB for Inventor 2010 LT to work well. I don't need anything else in XP spacewise- it's just being added for Inventor. 2. I'd like to create a separate /home partition for Ubuntu this time to save my user data, making future upgrades much more painless (I will be getting Lucid soon). How that works when upgrading, though, I don't know yet..
3. I'd like both OSes to share all my personal files (docs, pics, music, Inventor design files) if it is an efficient choice that works without problems.
4. Finally, because 2GB is minimum for Inventor to run decently, I need to maximize the speed of my RAM for it- from my reading, these so-called "swap" partitions can somehow be added for buffering this- people seem to sugguest the swap be half the size of the RAM for fastest speed, and some say add separate /usr or other partitions. I'm not clear on what would be most efficient for me.
I have limited HDD space- because of my laptop's BIOS, this single 120GB drive is the biggest I can get on my laptop, so efficient partitioning would make a huge difference for me. Before this, a 60GB HDD was in this. I'd like to see some added space for my data storage, but still keep things as fast as possible for Inventor when I use it, and Ubuntu.
I'd like the final layout to have a Windows partition (will start out as XP and will become Win7 when I can afford yet another copy), a partition for Ubuntu, and a shared Data partition that I can use for all my files between both OSs. I think this should be fairly straight forward with Linux on a Primary partition with / and swap. Only thing is, from what I've read (and yes I know this is a bit old school) it might be a good idea to put in a /Home partition so that I can reinstall new upgrades and maintain settings. But I don't want to max out my 4 primary partitions so I can use a 4th partition as a kind of sandbox for OS testing without using VirtualBox all the time.
This leaves me in need of some advice, I've never used Fdisk and I was planning on just using the Ubuntu installer to do all of this, but I don't know if I can create /Home as a logical partition in the main Ubuntu partition and still have the benefit of being able to reformat /root without losing /Home. I might have just confused myself, because no matter how many guides and How Tos I read I still don't really get extended partitions, I understand logical vs. primary but extended is...confusing. I need the Ubuntu partition to be bootable, so it needs to be a primary partition...I think. Unless I can have: /boot, /, swap, and /Home...
Also, if Ubuntu can read NTFS, and Win7 can read Ext3, what should a do with /Data? Or should I just go with FAT32 and be done with it. (It's a big HDD btw, 640 GB, so /Data will be fairly large)
I have a separate ext4 partition which contains all my data (music, movies, etc). When I delete files from this partition it is very slow because it copies files from my data partition to the Trash folder in my home partition. How can I avoid this? Can't the trash be configured so that it uses a trash folder in each partition instead of copying files to another partition (which is slow).
Q1) I was wondering if it is possible to Dual boot Ubuntu with Windows XP on a 1TB RAID-0 setup ?
Q2) Also, is it possible to create a SWAP partition (for Ubuntu) on a NON RAID-0 HDD ?
Q3) Lastly... I read GRUB2 is the default boot manager... should I use that, or GRUB / Lio ?
I have a total of 3 HDDs on this system: -- 2x 500GB WDD HDDs (non-advanced format) ... RAID-0 setup -- 1x 320GB WDD HDD (non RAID setup) (The non RAID HDD is intended to be a SWAP drive for both XP and Ubuntu = 2 partitions)
I plan on making multiple partitions... and reserve partition space for Ubuntu (of course).
I have the latest version of the LiveCD created already.
Q4) Do I need the Alternate CD for this setup?
I plan on installing XP before Ubuntu.
This is my 1st time dual booting XP with Ubuntu.
I'm using these as my resources: - [url] - [url]
Q5) Anything else I should be aware of (possible issues during install)?
Q6) Lastly... is there anything like the AHCI (advanced host controller interface) like in Windows for Ubuntu?
(Since I need a special floppy during Windows Install...) I want to be able to use the Advanced Queuing capabilities of my SATA drives in Ubuntu.
I created a partition in my hard disk for my data (documents, multimedia, etc.).How can I:Move the /home/ directory to the new partitionMake the OS (Ubuntu Linux) treat that directory as the default /home/.
How do you do this without breaking all the links and preferences in /home? Does the system take care of everything? Has anyone done it or is it actually system crippling?
There was a Toshiba Satellite notebook with XP I decided to install Fedora 13 in dual boot mode.So, I booted with Gparted and shrunk the ndows XP partition to just 24 GB.Then I set up partitions for Linux this way/boot, ext4 256 MB/, ext4 16 GB/home, ntfs 176 GBswap, 8 GBI intentionally left about 8 GB left just in caseThen I proceeded to install Fedora 13.I used the customized mode to use the already set up partitions and keep Windows XP.At the moment of setting the mounting points, fine with /boot, / and swap. But Anaconda wouldn't accept mounting point for /home.I went on anyway.Fedora got set up and run moothly.However, /home resided in / with only 10 GB left.And the /home partition could be seen as a separate disk with its 176 GB.This is /etc/fstab:
# # /etc/fstab # Created by anaconda on Sun Sep 5 05:46:26 2010
Im using suse 11.1 with /home on a separate partition. To move my /home to a larger partition it looked easy to use Yast partitioner. I copied all /home/ files first to the new partition and backed-up fstab.
with Yast I unmounted /dev/sdb6 = /home and mounted it to /local then unmounted /dev/sda4 = mynewhomepartition and mounted it to /home
checking the new fstab it looked fine but after a restart it did not work and I got an error. resetting the original fstab resetted the system as it used to be. My question is: why does it not work, are there (hidden) files with the old or other settings?.
How would I go about moving a separate home partition back to /, and be able to delete the /home partition? I'm assuming I would have to copy the contents of /home to the root partition, and change fstab at the very least.
What are the steps I must take to move my existing home folder to a separate, encrypted partition? Can I create this partition without damaging my current partition? Where is a trusted location to download App Armor profiles? What else can I do to harden the security of Ubuntu?
Gparted shows that my dual boot laptop has the following partitions: [URL] I want to create a partition and move the contents of my Home folder into it.
I've been trying to figure out how to move /home to the other partition that exists on my computer, however it's ntfs and turns out it's impossible to move my /home there. So how do convert that ntfs partition to ext3, I don't mind loosing data that's in that partition. [url] is the partition I'm talking about. So what's the best way to do it ? If you write what commands I should use please include partition names.
I want to install Ubuntu side by side with Windows. I have a big NTFS partition that has a folder with the same name as my username (let's say "joe"). Inside "joe" I have my personal files. Outside "joe" but still in the partition, there is random stuff that doesn't really belong anywhere, or now useless programs that I had to install there because the main Windows partition ran out of space. If during the Ubuntu installer I choose to use that partition as /home and make a user called "joe", will everything work fine?
Around six months ago (last time I reinstalled Ubuntu 9.10), on a whim I decided to check that option to "encrypt [my] home directory". I wanted to see what it was like. Mistake. Since then, I've been unable to figure out how to access the data in my home directory using any method besides booting the computer (usb drive, rip-out-and-stick-it-in-an-enclosure, etc.). Specifically, I find that shell script sitting there that tells you to run it in order to see your files, but it gives some kind of error. I also still have the code Ubuntu tells you to write down in order to decrypt your files.
Fast forward to this past week. I brought in the laptop to Best Buy for repairs to the hinge (the hinge! Ace Hardware could fix this problem! But I wanted to make full use of the service plan.), and I got a phone call a few days later, saying that it hit Best Buy's "No Lemon" policy. They were going to keep my computer and give me in-store credit toward a new one. Of course, I refused to pay ~$70 for them to back up my data for me; what could possibly happen to it when they were fixing a hardware problem?
Anyways, I pleaded with them for my hard drive back, and they said that they could ship the hard drive back to the store so I could get my data off of it. I'm planning on going in there with my external backup hard drive and an external enclosure and doing it myself at the counter (If they charge $70 to back up a Windows partition, how much more will they charge for an encrypted Linux one?). I don't want to embarrass myself by standing around and not being able to get into my own data.
I've installed fedora 14(fresh installation) on extended partition.(~25GB).But I found that I've one standard partition of size 30MB.So should I install fedora on standard partition or LVM?I heard people saying that having home on seperate partition is good.But seperate partition means seperate physical partition or logical partition(also)?
I just got a 1.5 tb I want to do a dual boot fedora 10 and vista. I don't have vista now. Can I install fedora 10 on a 200 gig partition and install vista on the rest when I buy it later?
How to correctly install F11 on the same disk as Windows. I have created the partition but can't tell what F11 install to use to setup as dual boot with Windows XP Pro 64bit.
Windows 7 is first boot disk. Installed Fedora 13 on second disk from DVD. During installation it did not ask if I wanted dual boot. Fedora installed fine on second disk. Rebooted and only Windows will lood. How to setup to dual boot? Can I modify Windows Boot file? or do I have to install Grub on to sda. How do I do that?
I'm going to setup a File and Printer Sharing in my little home network... 3 Computers actively connected to the Web through a single ADSL2+ Wireless Router (number of Computers will increase later) At the moment 2 of the computers are running Fedora 10 and 1 running Windows XP...
Now i want to setup the 3 machines to use 1 printer which is connected to one of the Fedora 10 machines, and i want File Sharing to be enabled so each machine can easily view each others shared files and also be able to print when ever needed (ofcourse the machine with the printer will have to be on for the printing process to happen) I've installed Samaba on each Fedora Machine, enabled sharing but i dont seem to be able to view the Windows machine or each other....
