When I install Fedora 12, I tried to use manual partition like before. But installation failed somewhere. So I have to accept Fedora 12's default partition. Once I experienced slow login problem. I have to reinstall. But the reinstallation would delete the previous installation. Is there a good way to keep personal files intact on reinstallation?
View 1 Replies
How do I reinstall Ubuntu without wiping my personal data files?
View 9 Replies View RelatedUbuntu 9.10 64bit. Acer Laptop
Using ubuntu 9.10 cd to access laptops hard drive.
foun readme file in /media/disk/mark
opened with openoffice. THIS DIRECTORY HAS BEEN UNMOUNTED TO PROTECT YOUR DATA.
From the graphical desktop, click on: "Access Your Private Data"
or
From the command line, run: $ ecryptfs-mount-private
So I tried a couple of ways...
I am running Red Hat 5.5. Yesterday, a simulation software program I was running froze. I attempted to abort the program but the computer was unresponsive. When I attempted to copy my data to an external drive, the computer completely froze. After 30 minutes of not responding, I did a hard shutdown. When the computer rebooted, it appears that it has reverted to a state from 4 days ago. All of the data files that my simulation has created in the last 4 days are gone completely. However, some data that I removed 3 days ago seems to be back on the computer.
I opened some of the "removed" files and they are not corrupt, the data appears as it should. I contacted Red Hat support but all they could tell me is that there is no record of anyone logging into the computer between 4 days ago and when I rebooted yesterday. They claim to have never heard of this problem before. I have had this problem once before on a different computer but the simulation program completely filled the hard drive, which is when it crashed and "reverted" to a previous time. But it looked like I still had 11GB free yesterday when it crashed.
My Ubuntu Remex Notebook had been install in windows7 by wubi, I want to reinstall it to solve some problems, but how to save my personal files in Downlads folder?
View 2 Replies View RelatedRisk to native OS from Live CD?
when booted from linux live cd, all partitions of hard disk become accessible without any restriction. How to block this?
I had issues on my last install , I couldn't boot into it cause I accidentally uninstalled python 2.6 and everything it was attached to. So I reinstalled on a separate hard drive, I can see my other file system from the media folder but the only thing in my home dir is these 2 files 1 read me that says
PHP Code:
THIS DIRECTORY HAS BEEN UNMOUNTED TO PROTECT YOUR DATA.
From the graphical desktop, click on:
or
From the command line, run:
And then this file
Access-Your-Private-Data.desktop
But when I click it and try to run it I get this error
PHP Code:
I had 2 accounts on a single system. Other users are able to see my data. how to stop other users to access my personal data.
View 8 Replies View Relatedthis is my fstab::
Code:
LABEL=/ / ext3 defaults 1 1
LABEL=/backup /backup ext3 defaults 1 2
LABEL=/boot /boot ext3 defaults 1 2
[code]....
Now while installing, I had 2 Hdds. at the time of partitioning, i used both as separate Hdd and made a /backup. I used that for my backups. That was RH9. Now I want to install Centos 5. and i wish to keep the /backup as it was. (as my cron scripts and others are written in this way)I wish that it will be mounted at the time of boot. And moreover, I can add a new hdd (using the manuals) but I need to keep the data.
Also the second question:: I have implemented a WiFi hotspot in a hotel with a Cisco WLC and several Cisco APs. Now I wish to restrict and log on access for both wifi and wired LAN using user names. Raduis is okey... with a mysql password database... I found a thing named hotex hotspot billing. But that's expensive. Also FCS's module is expensive too. I do not need billing, just access control. Any ideas on this?? It must be a linux based kind of baremetal package...
I have a data in existing kernel & I need to update a new kernel version so afer the upgration , how can I access the data from the previous kernel.
View 12 Replies View Relatedhow can i prevent erase of screen data while scrolling. When i use the ANSI cursor movement commands(27[PnS , 27[PnT etc) say for scroll down the top lines get erased. i.e. if i scroll up after scroll down, i am unable to view top lines again.
View 6 Replies View RelatedThis is to request assistance or information as to why the evolution application will not accept the evolution-backup-tar.gz file from a previous version.
Situation: I upgraded by way of a fresh install from openSuSE 11.2 to 11.3 (GNOME desktop).
Before upgrading, I produced the above mentioned backup file so that I could import all the mail, addresses etc. into the new application.
Result: it does not work. The process starts up seemingly normal but then simply sits there forever with the message "evolution shuts down" - but it does'nt. I have to kill it to stop it.
I am looking forward to a resolution since it would be a real pity if I lost the mail history.
In my Downloads folder I have a message that says "Personal File Sharing You can receiee files over Bluetooth into this folder"I can't figure out how to get that to go away.
View 2 Replies View RelatedI updated to Thunderbird 3 by following instructions from http:[url]....Everything updated nicely, but in menu I don't have Thunderbird anymore - there is Shredder instead.Also Firefox was automatically updated - with change of name to Shiretoko with different icon. Wanted to make sure I added safe repositories, and why these changes?
ps. i checked some websites and seems like it is installing alpha/beta versions. so since it is not working now - how do i revert to previous versions without losing data, and how do i install thunderbird 3.0 then.
Is there a relatively easy way to restore the "previous" version of an RPM in FC10? The last set of updates killed my GUI and I'd very much like to get back to whatever I had before I got updated to:
xorg-x11-server-common-1.5.3-13.fc10.i386
xorg-x11-drv-evdev-2,1.3-1.fc10.i386
xorg-x11-server-Xorg-1.5.3-13.fc10.i386
I have the Ubuntu 9.10 installed and another partition where I want to have Fedora.
But I would like to install it without messing up with the Grub 2 bootloader that I already have there.
Is it possible to install Fedora and then add it to Grub 2? If so, how can I do that?
I want to start using videos/music files downloaded from untrusted sources (BT,Sharing Forums, etc.). Haven't made this a habit b4 because of the security risks. I want to take steps to reduce the risk & protect my computer from anything malicious. What are some good choices for this? The biggest step I took so far is using Ubuntu since it's very virus resistant, but other threats do exist out there (rootkits, malicious scripts, etc.). When downloading files from untrusted sources, who knows what may be hidden inside.Some options I'm thinking about:
1) Using a VM (with Ubuntu installed inside) & playing the files inside the VM. If anything malicious happen, it would be trapped inside & I could easily revert to a clean snapshot.
2) Using AppArmor to restrict what the files or program used to play the files can/can't do. AA seems very complicated though.
Are the above overkill? Would it be sufficient enough to just open these files on a non-admin user account since no access to root or sudo?
I've been playing around with stuff lately, and I was thinking that I could theoretically move my personal files to another partition, have it mount under /home/User... then change the system partition to 6 or 7GB and go about my merry way...That way, if I need to reinstall the os, or when the next release comes out, or even install another primary system, I could just wipe the system partition and keep all my data on the HD...just make an fstab entry like:
Code:
/dev/sda3 /home/User btrfs default 0 2
or something, and them BOOM! it's done. I am the master of my domain.
(Running Lucid Lynx) In the Personal File Sharing Preferences it won't let me to tick the box to share public files on the network as it says the required packages are not installed on my system. The options for sharing via Bluetooth are available to me however.What packages am I missing (and how do I get hold of them)?
View 9 Replies View RelatedI actually have a Suse running on a partitioned harddisk of 27GB but I prefer Fedore anyway. I would like to install Linus Fedora on my computer to make a dual boot system (Vista and Linus) by overwriting the previous Suse. My question is
Will I be in OS booting trouble (i.e unable to resurect the previous boot screens, windows might possibly be deleted, or not be present in the boot options) if this is done ?
Also, because I have only one disk (the first disk of Fedora 11 downloaded), will it be fine with just one first disk ? (there are several to download but I think I assume I am not going to use all of them during installation, right ?)
If I enable Wi-Fi on my laptop and use a public Wi-Fi hotspot at an airport, will a firewall such as UFW be enough to stop hackers accessing my personal files which are NOT transmitted over the Wi-Fi connection?
View 9 Replies View RelatedI'm using 10.04 beta...
If I go to system - preferences - personal file sharing, I cannot select "share files over the network." The panel is greyed out and the message "This feature cannot be enabled because the required packages are not installed on your computer" is shown
It ever so usefully doesn't tell me what those packages are though! - It'd be nice to have more useful error messages or the ability to click to install them...
Anyway, what do I have to do to get this going again?! I've installed everything to do with samba, webdav that I can find but still no cigar...
I'm looking for a powerful network traffic monitor that can do all of the following (or at least a combination of tools that can do the following):
Tell me how much data was downloaded/uploaded on an interface this month and the previous month tell me how the traffic was used throughout the monthshow which internal IPs (IPs in the 192.168.1.0/24 network) used how much traffic show which ports/protocols on those IPs used all that traffic
Hhow LIVE traffic flow statistics that can tell me total speed of traffic going through an interface as well asshow which internal IPs (IPs in the 192.168.1.0/24 network) are using how much of the traffic show which ports/protocols on those IPs are using that traffic
This tool will run on a linux router through which all my internal PCs are connected to the Internet. This means the tool(s) need to work with NAT (traffic being forwarded and not necessarily destined for the interfaced being monitored).
The distribution being run doesn't have a package manager so any packages or dependencies have to be manually compiled and SCPed over file by file. For this reason, the tool/tools need to be simple (things like vnstat, not things like ntop that have their own web interface).
I know that vnstat can tell me the first bullet point so it's only there incase there's a tool out there that can do everything. If there's a tool that can only do the second or third bullet point, that's great too - I'll just keep using vnstat and look for something else to do the other task.
I am using UBUNTU Karmic Koala 9 .10 . Recently I have noticed certain errors with my LOG Files. My Log files are just logging the events for that particular day.All the logs of the previous days are lost. It happens to almost all categories of log.Every log just shows one particular days log. I have not done any changes to any settings on this machine as Ubuntu on my laptop is very stable and totally hiccup free. Previously, the log file viewer used to show logged information from over a week or so.but..now every other days log files just vanishes. I am just concerned
1)Is it because of any rogue script that is deleting the previous log files.
2)Has my machine is getting compromised in anyway as I am using it extensively for Internet.[ I have the normal Firewall enabled already] With regard to this I have a few questions
1)Is it Ubuntu's default behavior?Does it back up the old log files everyday?
2)If it is not the way Ubuntu treats Log files.How can I correct this?
3)Does apt-get clean or apt-get autoclean delete log files?
I have searched Google for past 3 days for a possible solution to this problem without yielding much result.
I keep getting the following error when I run sudo apt-get update:
Quote:
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error:
[URL] release Release: NO_PUBKEY 5D654504F1A41D5E
I am attempting to copy files from one server to an external USB drive on a second server. Both servers are running custom RedHat Linux, kernel 2.6. Both are setup as Check Point SecurePlatform (one is a log server and the other a management server). I am trying to archive files from one (HP DL380 G5) to the second (HP DL380 G6). I am not able to archive directly to the external usb drive when connected to the HP DL380 G5 (data gets corrupted and switches to read-only access). The external USB drive has no issues when connected to the HP DL380 G6 server, thus my reason for trying to copy the files across servers.
When I attempt to use scp to copy files between the server, I am prompted for the password. Once entered the debug shows the authentication is successful, but then no files are copied (see log below). I have tried searching for potential answers, but none have panned out. Unfortunately I can't yet post the actual scp debug log output as some of the text is viewed as a URL and not yet allowed for me. I have changed all the atsign symbols to '(a)' to avoid the URL inference.
Output log from scp attempt follows:
[Expert(a)server1]# scp -p -r -v /var/fromhere/* copyfile(a)server2:/media/disk/tohere/
Executing: program /usr/bin/ssh host server2, user copyfile, command scp -v -r -p -d -t /media/disk/tohere/
OpenSSH_3.6.1p2, SSH protocols 1.5/2.0, OpenSSL 0x0090707f
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Rhosts Authentication disabled, originating port will not be trusted.
debug1: Connecting to server2 [192.168.10.3] port 22.
debug1: Connection established.
debug1: identity file /root/.ssh/identity type -1 .....
debug1: Exit status 1
lost connection
[Expert(a)server1]#
I have bought a lian li ex-50 raid case with e-sata i have 5 1tb disks in it with raid3 and ext4 format.
Untill now was ok but after upgrade to fedora 14 or 15 that i have tried when i try to copy from or to files the raid collapse and rebuilds data(i dont loose data) .....
I want to take the data from it so i can format it with ext3 or ntfs and use with my server on the network,or if there is any solution with the ext4 format
I've been installing Ubuntu on more and more systems for people. But I'm just doing the install from the the LiveCD download on the Ubuntu homepage. Once I do the install people want their desktop to look like mine so then I have to install Compiz and Cairo-dock and configure them both like mine. Is there a way to create a LiveCD or installation disk already pre-loaded and configured with Cairo-dock and Compiz. I'd also take off F-Spot and add digiKam, along with making sure a working version of Flash and Java are also included in my personal installs..
View 5 Replies View RelatedI create music and usually gets sold world wide. I have some distributors that have been able to access a private server and get the new tunes I make to download via ftp. Well that server is getting full and I was trying to create another directory on my website itself.I created the directory. made the ".htaccess" file. Then I tried to make the htpasswd file but my server just keeps saying no command by that name.
View 8 Replies View RelatedI've got a personal repoI'd like to made a RSS flux of itI tried :
Code:
repo-rss -f `wget ` cyrilleBlag140.xml
And I parse the file ( example here
[code]....
