Networking :: Connection - Can't Connect To Suse Server By Ssh (using Putty)
Jan 15, 2011
I can't connect to my Suse server by ssh (using putty) cause console shows me this message: connection reset by peer some times, other times It let me type the user but when I going to enter the password It reset the connection. What I did?? Reinstalled the ssh, but everything was same, the problem still appears. So I reinstalled the Operating System, now but when I going to connect to server the problem appears again! What could be the cause of this behavior??
View 3 Replies
ADVERTISEMENT
Feb 27, 2010
I researched a long while and could not find an answer to these problems, so here I am. I have a debian server running on my home network. I have it running LAMP and it has a live website.
I have samba running and share files with my windows 7 machine, so they do connect.
When i try to use putty it always refuses the connection.SQLyog tells me off too, but it only cays it cannot connect.
I was checking into SSH, since that is how they are both trying to connect, but I can not find adequate info online for my problem.
I have debian lenny running, I was pretty sure it has ssh running, but i couldnt locate 'sshd'
Is SSH on there by a different name or do I need to install the service.
(ps - getting samba running was a nightmare, but i think it was windoze fault, i tried setting up the debian machine exactly how the guides said to do, but it never could connect and denied passwords constantly, then the next day after a few windows reboots had happened, all of the sudden it worked. Don't know what the deal was there. Could that be instrumental? Sorry I am a web dev and not a networker so this stuff is not my forte.)
View 2 Replies
View Related
Jul 4, 2011
when I try to connect via PuTTY from a windows machine I get " PuTTY Fatal error connection timed out. I try to do so via a router redirecting IPadr:86 to local adr:22 on the Linux machine.
I seems not to be a routing issue since the router is setup to redirect apparently correctly.
Well I have stopped iptables and selinux is disabled. The sshd deamon is running. I can logon with ssh locally "ssh webcamATlocal adr".
View 3 Replies
View Related
Jul 23, 2010
Right now I have a machine set up running Fedora. I have configured inittab to accept Console Logins, but I am having problems getting my netbook running PuTTY to connect. How would I go about finding the Host Name and Port to connect to?
View 6 Replies
View Related
Nov 4, 2009
was trying to access the server through putty, it immediately closed connection.i tried this a couple of times and still the same problem.
View 2 Replies
View Related
Apr 14, 2011
I'm trying to do a ssh connection (using Quest Putty) from Windows to Linux. As linux are joined to Active Directory, is possible to do a SSO (using kerberos). If I connect from linux to linux using ssh, it works fine. If I connect form Windows (Win7) to Linux using Quest Putty or Centrify Putty, an error is displayed:
Code:
C:Program FilesCentrifyCentrify PuTTY>Plink.exe -A -K -v serverl001.jed
Looking up host "serverl001.buss.red"
Connecting to 10.16.44.234 port 22
Server version: SSH-2.0-OpenSSH_5.4
We claim version: SSH-2.0-PuTTY_Release_0.60_(Centrify_GSS_1.4)
[Code]...
View 11 Replies
View Related
Sep 15, 2010
i can't connect to my server using putty.
I have a virtual dedicated server, running - Linux Red Hat Fidora core 6- Pentium 4, 3ghz
I'm attempting to use Putty to log in SSH, but I'm getting an error.
Saying the sever unexpectedly close network connection.
I don't know if this has anything to do with it. This is a new computer, that hasn't logged in using putty before. Also I'm on a home wireless network. It dosen't seem to be a firewall issue, the error message pops up, when the firewall is disabled.
And I just had Go Daddy do a reboot. Oh, and I think I might have entered my password incorrectly a few times, last night.
I remember the Go Daddy rep, saying that my IP address may be flagged, but that it would unfilter and unlock it self within an hour or so. It's been over 24 hrs.
Before the password issue, i was able to log in.. But i can't now.
Others can log in. So there unable to duplicate the problem.
I'm new to Linux, and SSH.
Any help
I'm trying to install some software...
View 3 Replies
View Related
Nov 5, 2010
I've been allowed to work on the server of a forum. I was given the username and password, and with them logged in successfully on the server using PuTTY, but now I'm not sure what command I use to do anything to the users on the forum For example how would I change someone's username or password, etc.
View 3 Replies
View Related
Apr 6, 2010
I am not able to connect to server through putty, my collegue is able to connect to same server from his desktop through putty.
I am getting ssh session and after providing user id an password its stays still and no error message. firewall and se linux is disabled and also i checked tcpwrappers there is not restriction given.
View 1 Replies
View Related
Feb 9, 2010
I have 2 computer: 1 computer install ubuntu v9.10, in this computer already installed openssh-server and openssh-client, and 1 computer install windows. In computer with windows , i used putty connect to computer with ubuntu, but i can't connect. I don't understand what's error.
In the Putty , i configured:
IP : IP address of computer Ubuntu.
Port 22
Connection Type SSH
This is error: "Network Error: Software caused connection abort"
In computer with windows, i can ping computer with ubuntu and in computer with ubuntu i can ping computer with windows.
View 5 Replies
View Related
Apr 4, 2010
I am trying to play my audio files at work from my home computer over ssh. The computer I use at work is windows and so I use Putty to make that connection. However when I mplayer file.mp3, the file starts to play, but I am assuming it's playing on my home computer.....so, I am wondering, how do I forward the audio to my remote computer?
and no, can't use a CD... I work in a car with no CD player, and the computer is a Panasonic Toughbook with no CD-ROM... options are limited.
View 5 Replies
View Related
Aug 27, 2009
I gannot connect to my Linux server using ssh and get Server refused to allocate pty message. Before it was working fine and today the problem appear, i don't know why this problem. Not that i'm new on linux system. my linux version is Linux 2.6.18-8.el5. I only found the same topic in this forum but not find solution, i try ssh with -T but still not working.
View 1 Replies
View Related
Jul 28, 2010
Can you find my blind spot? I had PuTTY up & running untill I did a reinstall of Fedora13.I can ping 192.168.1.163 fine. SELinux is disabled. Firewall is default (SSH allowed on p22).I have just disabled the firewall with same result)
PuTTY reports:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.07.20 16:23:52 =~=~=~=~=~=~=~=~=~=~=~=
Event Log: Writing new session log (SSH raw data mode) to file: C:UserswimDesktopputty.log
[code]....
View 8 Replies
View Related
Feb 10, 2011
I am access my linux box remotely using putty. I ran some build process on the remote machine. I lost my connection and now I had to re login using putty. I dont know if my process has finished or not. How will I check that.
View 2 Replies
View Related
Feb 9, 2010
I am using redhat on server and open suse on client. When I want to ssh from my server machine the following error occur "connection refuse". I execute the following command on clien machine "/etc/init.d/sshd start". It shows the following error just after command execution "sshd re-exec requires execution with an absolute path".
View 1 Replies
View Related
Oct 11, 2010
I have implimented SugarCRM on a SUSE 10 box . Every thing goes ok but in the SugarCRM ,it's saying :
Quote:
Error: Could not connect to the Sugar Server. check your Proxy Settings value in the System Settings admin panel. Last attempted connection @ 10/11/2010 06:37pm and unable to setup email inside that. But the system is neither have proxy setting and internet runs fine outside SugarCRM. IN RHEL,CentOS all run ok but not in SUSE ?
View 3 Replies
View Related
Aug 17, 2010
Recently, Putty keeps intermittently freezing and locking me out of the system (i.e. I can't stop the session and I can't re-login via ssh again until I've gone to the machine and pressed "reset").
So far, it mostly occurs when opening a file in VIM, but it does sometimes occur when using tab to auto-fill a file or directory name at the command prompt.
View 2 Replies
View Related
Feb 2, 2010
This app embeds putty and allows you to save ssh and telnet connections (including post login commands). You can also save the connections and sort them however you like. It's great for organizing linux clustered servers etc... Tabs are also a plus (yes I know konsole does this part as well)So to the point at last. I finally upgraded to OpenSuSe 11.2 and I was looking for an app that does much the same thing.
View 2 Replies
View Related
Jan 10, 2011
I had Ubuntu guest installed on VMWare. The Host OS is Windows 7. But now I want to migrate it to Virtual Box. I migrated it, but it does not allow PUTTY to connect it. It says "connection refused". On VMWare on same host and same guest, PUTTY connection is successful. But it does not allow on Virtual Box. It says connection refused. Both on VMWare and Virtual Box, the guest Ubuntu is configured using NAT networking.
View 2 Replies
View Related
Jun 19, 2011
I want to create a broadband connection in suse 11.4 , in the windows the connection Properly works but in suse ...i recently installed qinternet , it runs the dsl connection , and shows this massage : " connected , connection established " , but no internet
View 14 Replies
View Related
Jan 12, 2011
With SUSE-9 I used pptpconfig to connect to a Windows VPN Server.With openSUSE-11.3 I created a VPN Network Connection,however I have no idea how to start the network connection.
View 1 Replies
View Related
Jun 11, 2010
One of my colleague has created a LINUX machine with VMWare. This machine has a name such as S003AP03 and IP adress. Normally one can connect to the machine by using putty with the machine's name or IP-Address. But to this machine one can't connect it with it's name. Something should wrong.
Where can I make the correction?
View 8 Replies
View Related
Jan 7, 2011
I am merely trying to change the port for my ssh server.However it isn't changing.I edited my ssh_config file to:
Code:
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for[code]...
When i try to connect to my server via port 443 i get a connection refused error. However when i try to connect via port 22 it connects. Since that didn't work, i tried restarting the entire server.To restate, i changed the config file and restarted ssh then the computer, however the port didn't change.Ohh and yes my router is set to port forwarding on port 443, though it doesn't matter since I'm inside the network.
View 2 Replies
View Related
Jul 8, 2010
i have to install app server on VM of Linux box. am able to connect Linux box via puTTY and Xmanager as root user. but am not able to connect as a normal user. in Xmanager i see network error. In puTTY console gets disappear
View 1 Replies
View Related
Jan 22, 2011
I can log in when using the keyboard from the server no problems but when I try and log on from my laptop this morning using putty I can connect type in my user name but when I put in my password it says access denied now I also can not FTP and webmin does not connect to the server but I can get to the web pages no problem with a browser so can this be fixed or do I have to start from scratch again to get me logged in with putty and webmin somehow the password is not working in ssh.
View 8 Replies
View Related
Feb 6, 2010
How can I connect to Linux (which is in a VM) from the host PC using putty? I can ping the 192.168.1.108 from my host PC. And there is sshd process running on Linux. I choose the SSH to connect, but gives error.
View 5 Replies
View Related
Jan 26, 2011
I'm using putty 0.60 (on Windows Vista) to connect by ssh protocol to other Linux computer. I have a problem with VI/VIM. When I key button "n" or "b", it returns me n^Z or b^Z.
View 9 Replies
View Related
Apr 28, 2011
Could you provide me steps on how to connect the guest OS (RHEL 4) using Vmware thru host OS( Win 7)
I am using Bridged connection. How to choose the static IP to be added in the Host OS.
View 1 Replies
View Related
Apr 19, 2010
I have a SSH server "SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2" running at IP 1.1.1.1When I try to access it from another machine on the internet which is at 2.2.2.2 every thing goes fine. However when I try to do the same thing from 3.3.3.3 it does not work and Putty throws me this error "Server's host key did not match the signature supplied". I went inside HKEY_Current_userSoftwareSimonTathamPuttySshHostKeys and tried to remove all the known host and still the issue is existing, I am literally scratching my head as to what is going wrong.I Googled about this error and I saw many were having problem similar to mine however none were able to give some conclusive results so far.
View 15 Replies
View Related
Mar 6, 2010
I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
View 3 Replies
View Related
