i have to install app server on VM of Linux box. am able to connect Linux box via puTTY and Xmanager as root user. but am not able to connect as a normal user. in Xmanager i see network error. In puTTY console gets disappear
View 1 RepliesI am using a broadband internet connection. Currently I am using pon and poff commands to start and stop the internet connection respectively. But for these commands to execute I should switch to the root user. I want even a normal user to be able to start or stop the connection. How can I do this?
View 1 Replies View RelatedAnyone had any issues with connection to LDAP server from evolution as a normal user, but if evolution is started as sudo/root it works fine. This is on 10.10
View 1 Replies View Relatedwhen I try to connect via PuTTY from a windows machine I get " PuTTY Fatal error connection timed out. I try to do so via a router redirecting IPadr:86 to local adr:22 on the Linux machine.
I seems not to be a routing issue since the router is setup to redirect apparently correctly.
Well I have stopped iptables and selinux is disabled. The sshd deamon is running. I can logon with ssh locally "ssh webcamATlocal adr".
Can you find my blind spot? I had PuTTY up & running untill I did a reinstall of Fedora13.I can ping 192.168.1.163 fine. SELinux is disabled. Firewall is default (SSH allowed on p22).I have just disabled the firewall with same result)
PuTTY reports:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.07.20 16:23:52 =~=~=~=~=~=~=~=~=~=~=~=
Event Log: Writing new session log (SSH raw data mode) to file: C:UserswimDesktopputty.log
[code]....
Is there any way to use 'fdisk -l' as a normal user? I see in F12, /sbin has been added to PATH by default for a normal user, but when trying to use it, nothing shows up.
See below for demonstration purposes:
Code:
Password:
I don't want to use 'su -' or 'su -c' and login every time.
Quote:
Originally Posted by G�del
It gets me within a mile
how i am auto mount the ntfs drives through the normal user with out asking password... I need it and also one thing is i want two drives only auto mount and when i open the other drives it should ask the password?...
I can switch to root by typing "su"After having done something, I hope to switch back to original normal user. What's the command,
View 3 Replies View RelatedIf sound on F12 works as root user but not as a normal user, try this simple fix! I've been struggling to get sound working as a normal (non-root) user since F10. Until now I've had to run X as root user to get any sound out of my machine.
Sound actually works OK now for me as a normal user. Here's how I fixed the problem.
First I uninstalled pulseaudio with:# yum remove pulseaudio Then reboot back to the hardware. You might want to keep pulseaudio, but I have no need for it. PA wasn't running on my system anyway.
Running X as root user, I did the following: As a test I opened a root shell and typed the following:
[root]# alsamixer c0 That started the alsamixer OK, and all the controls were accessible.
[Code]...
Problem is that I can't burn disk using nero linux as normal user. If I try to do so, it tries to create a .nrg image in the drive rather than burning those files in the disk. But if i run nero as super user then it works okay. If I run it as normal itan't even recognize my burner
View 2 Replies View RelatedHow do i add the default normal user to the sudoers group? Is it normal for the main user to be kept out of the sudoers group or did i do something wrong during install?
View 2 Replies View RelatedI'm trying to start an Oracle Integration server as user "oracle" at system startup and my approach was to place a couple of lines in /etc/rc.localsu oracle/home/oracle/startallSomething is not quite right about this as it seems to leave some processes owned by root.
View 2 Replies View RelatedI am running Fedora 12 OS on my machine. I would like to disable the USB devices for normal users so that usb-storage devices cannot be plugged in. However at the same time a mouse or a keypad may/could have a usb connection. note that root should be able to use the usb storage devices. How can the same be done on fedora 12? I would prefer not to do it via the BIOS options.
View 6 Replies View RelatedI am using fedora 12.I have two internal drives. Both are ntfs. Whenever i click on them it prompts to enter root password. But i want to mount them as normal user without entering any root password. How can i disable it so that i am not asked to enter root password everytime i mount the drives.
View 2 Replies View RelatedMy X server restarts as soon as I log in as a regular user. Root user has access. I can log in both root and normal user in terminal and over SSH. I tried rebuilding and installing the proprietary NVIDIA driver, as it builds it's own config file for X. I've had no previous problems with X on this system. The last major change to the system before the last log out was the installation of MCNP5. MCNP5 was installed under the regular user; no root privledges were needed.
View 8 Replies View RelatedI'm using fedora 12 and modified the user login options(normal and super user login). I've been using the accounts for a while but i've bumped into a problem - audio not working as a normal user but works when logged in as root. Also, i'm not able to use VLC as a root user.
View 1 Replies View RelatedI'm having problems with my wireless. It connects without any problem, but it is very slow. Actually I have the impression that the connection velocity is varies from normal to very slow, however the average connection velocity is very slow. I have been looking up the forums for more the one month with any success. I have tried to install the compac-wireless drivers and the kmod-wl with many different network setups. For sure it is not a problem with my home network, since it works fine with my other old notebook running fedora 11 or when I boot in the windows.
My system configuration is:
- sony vaio VPCCW23FX
- card: Atheros AR9285
- driver: ath9k
- operating system: fedora 12 - kernel 2.6.32.12-115.fc12.x86_64
I'm able to mount ntfs file system as root user but I want the same thing to be allowed to normal user .
I'm not much familier with linux environment so please explain me how to do that for normal user.
I have 2 computer: 1 computer install ubuntu v9.10, in this computer already installed openssh-server and openssh-client, and 1 computer install windows. In computer with windows , i used putty connect to computer with ubuntu, but i can't connect. I don't understand what's error.
In the Putty , i configured:
IP : IP address of computer Ubuntu.
Port 22
Connection Type SSH
This is error: "Network Error: Software caused connection abort"
In computer with windows, i can ping computer with ubuntu and in computer with ubuntu i can ping computer with windows.
I have a question that i want to make a normal user to execute the commands which the root user is able to execute, say if i have a user named siru and when i logged in using siru i cannot run commands like tracert,nmap@loccalhost and all but i can run when i have logged into root account so my question is how to make siru to run the command tracert,nmap@localhost.I have even edited the .bash_profile of siru's home directory from
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
[code]...
I can't connect internet using ADSL modem of bsnl.I am new user of linux(fedora8).To do so I go through system>administration>network configuration and trying to activate xdsl modem and ethernet but unfortunately ethernet does not seems though there is a ethernet card.Here it should be mention that in my windowsXP partion there is no problem for internet connection.so what can I do next?
View 1 Replies View RelatedUsing a set of instruction given to me, I was able to set up a Macintosh system running Mac OS X to successfully connect to a virtual private network.I then tried to adapt those same instruction to configure a system running Fedora Linux 12 on an Intel Core2 Duo system.However when I try to connect using the NetworkManager Applet, I get an error that saying the VPN connection failed, with no clear indication of what the actual problem is.What can I do to troubleshoot this problem and find out why the connection is failing?
View 1 Replies View RelatedThe normal user is now in the sudoers group. How can i allow it to install programs using it's own password rather than having to know the super-secret Root-Users password?
View 5 Replies View Relatedhaving a hard time mapping a drive from a windows xp PC to a Linux Share. I have edited the SMB.conf file to include the share I want to connect to. when I try try map a drive to the Linux share using NET USE M: \192.168.15.5pairing I get the following error:"system error 1326 has occurred.Logon filaure: unknown user name or bad password."I use a username and password that is valid on the Linux server and has access to the Share.
View 2 Replies View RelatedI am new to to dovecot and would like some help, so please be kind.I have one user that can send mail but not read it either by pop3 or imap.I am running Dovecot 2.0.11 on Fedora 14.
View 2 Replies View RelatedRecently, Putty keeps intermittently freezing and locking me out of the system (i.e. I can't stop the session and I can't re-login via ssh again until I've gone to the machine and pressed "reset").
So far, it mostly occurs when opening a file in VIM, but it does sometimes occur when using tab to auto-fill a file or directory name at the command prompt.
This app embeds putty and allows you to save ssh and telnet connections (including post login commands). You can also save the connections and sort them however you like. It's great for organizing linux clustered servers etc... Tabs are also a plus (yes I know konsole does this part as well)So to the point at last. I finally upgraded to OpenSuSe 11.2 and I was looking for an app that does much the same thing.
View 2 Replies View RelatedI am trying to play my audio files at work from my home computer over ssh. The computer I use at work is windows and so I use Putty to make that connection. However when I mplayer file.mp3, the file starts to play, but I am assuming it's playing on my home computer.....so, I am wondering, how do I forward the audio to my remote computer?
and no, can't use a CD... I work in a car with no CD player, and the computer is a Panasonic Toughbook with no CD-ROM... options are limited.
I had Ubuntu guest installed on VMWare. The Host OS is Windows 7. But now I want to migrate it to Virtual Box. I migrated it, but it does not allow PUTTY to connect it. It says "connection refused". On VMWare on same host and same guest, PUTTY connection is successful. But it does not allow on Virtual Box. It says connection refused. Both on VMWare and Virtual Box, the guest Ubuntu is configured using NAT networking.
View 2 Replies View RelatedI'm trying to do a ssh connection (using Quest Putty) from Windows to Linux. As linux are joined to Active Directory, is possible to do a SSO (using kerberos). If I connect from linux to linux using ssh, it works fine. If I connect form Windows (Win7) to Linux using Quest Putty or Centrify Putty, an error is displayed:
Code:
C:Program FilesCentrifyCentrify PuTTY>Plink.exe -A -K -v serverl001.jed
Looking up host "serverl001.buss.red"
Connecting to 10.16.44.234 port 22
Server version: SSH-2.0-OpenSSH_5.4
We claim version: SSH-2.0-PuTTY_Release_0.60_(Centrify_GSS_1.4)
[Code]...