How can I connect to Linux (which is in a VM) from the host PC using putty? I can ping the 192.168.1.108 from my host PC. And there is sshd process running on Linux. I choose the SSH to connect, but gives error.
View 5 RepliesCould you provide me steps on how to connect the guest OS (RHEL 4) using Vmware thru host OS( Win 7)
I am using Bridged connection. How to choose the static IP to be added in the Host OS.
Right now I have a machine set up running Fedora. I have configured inittab to accept Console Logins, but I am having problems getting my netbook running PuTTY to connect. How would I go about finding the Host Name and Port to connect to?
View 6 Replies View RelatedI'm trying to ssh into a virtual installation of ubuntu I have, named "ubuntu-x86" but I can't get it to work for some reason. I have two network cards, both assigned to NAT, on the virtual machine, but one has a static IP address, while the other uses DHCP. For some reason, the command:
[Code]....
I couldn't find a clear answer to this, but is the linux-image-virtual package for host machines that will contain VMs, or a VM-oriented kernel for guest OS (ubuntu)? I have some guest VMs running on Microsoft's Hyper-V, and was looking for some further optimizations.
View 3 Replies View Relatedyou add a rule which allows a virtual machine to connect to ssh on the main fedora host?so connecting from a virtual machine to the main fedora host installation? I think i have to use an iptables command but not really sure
View 3 Replies View RelatedI have RHEL running in Virtual Box and my native OS is Win 7. From a purely educational standpoint, I want to be able to access RHEL from Win 7 over SSH. I download putty but don;t know how to make it do what I want. Ideally, I would like to use the linux command prompt at a minimum and preferably access the GUI apps also. IS this possible? I am just trying to explore and expand my linux knowledge.
View 7 Replies View RelatedI successfully installed the virtual box on my fedora 8 system, and also created a virtual machine with windows xp OS, it works nicely, I try to configure the serial port of my virtual machine and try to configure the path for the port "screen shot are attached" it gives me the error message also the "screen shot are attached" for your review.Is kind of mistake is going on during the path setting, and how to set the path for configuring the serial port of my virtual machine so that I can use the hyper terminal tool of windows.
View 4 Replies View RelatedI'm looking for virtual machine software that supports dual monitors on a Linux guest with a Windows 7 host.VirtualBox supports dual monitors only for Windows guests. VMware Player was extremely slow, so I gave up. I'm not sure it supports dual monitors, anyway. Can anyone recommend a product for what I want to do?
View 1 Replies View RelatedI am new to linux, it was nice to work with linux on virtual machine, but suddenly yesterday when I try to connect using putty from my windowsxp machine its showing network connection error. I dont know what happened. In linux machine ifconfig shows only 127.0.0.1, could not trace problem, guide me to trace the problem.
Previously it used to give 192.168.1.2/192.168.1.3 it used to vary every boot. FTP also stopped working. I am clueless. My system setup:
Del inspiron 1525:
RAM 3G
HDD 160G
Linux RHEL3 on VMWare
ok how do you add a rule which allows a virtual machine to connectto ssh on the main fedora host?so connecting from a virtual machine to the main fedora host installation? I think i have to use an iptables command but not really sure
View 3 Replies View RelatedMigrating Virtual Guest to Native Host
I have been using ubuntu server and desktop on virtual box for a while now. I have come to enjoy it more than being in Windows. I would like to install it natively. I am wondering. is there any way I can take my virtual machine and apply what I have done there to a new ubuntu install?
I have a ntfs hard disk, will ubuntu resize that for me at install?
Any good apps for backing up all my my firefox data and then applying that to my firefox in ubuntu?
I need to keep windows for some stuff for work, and for some games I like.
FC13/KDE
How do I make a Guest img on hard drive and install Guest on a FC13 host? Is there a set of instruction for doing it on a FC13 host? I went to this website for the FC13 KVM instructions, but near the bottom of page 1 he starts off with making a Guest, Debian Lenny, on ubuntu. Chapter 4 Creating A Debian Lenny Guest (Image-Based).
He has got me so confused at this point on whether he is installing a Fedora or Ubuntu Guest. On that 1st page all steps for making a Host is completed on my Host computer. [URL]. I have got the Windows XP disk in the CD ROM ready to go. If you do a Google search on KVM. Any prior instructions just does not work for Fedora 13
Will there be any issues installing and then subsequently running a Microsoft Windows Server 2008 R2 installation on a VirtualBox VM on a Linux host (Ubuntu 11.04 64-bit)? I require Windows Server 2008 R2 for a course I'm taking, and I dont have any systems to install/deploy it onto.
Host Machine Specs:
Ubuntu 11.04 64-bit
4GB RAM
350GB Disk Space
Nvidia Quadro system
I am trying to access shared folders in Virtual Box with Host OS being Windows7 and Guest OS is Fedora. Did anyone face a similar problem? I have been going through many solutions but none of them worked out. I am able to keep the required folders in Shared Folders making them Auto-Mount and Permanent. I tried to install Guest Additions from Devices, but I am not sure how to install the Guest-Additions software in Fedora. how to proceed so that I can access files in my shared folder.
View 1 Replies View RelatedI am using virtual box with Guest OS Linux Mint on Host OS Windows Vista.I want to log in as 'root'.I typed 'su' at the terminal, then it asked for a Password
View 3 Replies View RelatedOne of my colleague has created a LINUX machine with VMWare. This machine has a name such as S003AP03 and IP adress. Normally one can connect to the machine by using putty with the machine's name or IP-Address. But to this machine one can't connect it with it's name. Something should wrong.
Where can I make the correction?
I've set up ubuntu server 10.04 x64 with kvm and bridged networking and installed win server 2008 as a guest os. The guest os has full access to the network including lan/wan but the host os can only reach my lan and not the wan. This is true even when the guest machine is powered off?I have to admit that my knowledge of networking, particularly with respect to linux is very flakey but surely if the guest has internet access this should also apply to the host? My only suggestion is an issue with mac addresses but i don't know where to start. Has anybody ran into this problem before?
View 3 Replies View RelatedI have a main Ubuntu system and a virtual Windows system, set up using QEMU/KVM. So, I can start Windows using virt-manager and connect to it using a VNC client.But what I really want to have is a new Xorg display that is connected to this Windows system, so that e.g. CTRL-ALT-F8 shows Ubuntu, CTRL-ALT-F9 shows Windows. That'd be a real alternative to a Linux/Windows dual-boot setup.
I know that GDM had some option to connect to another X server (XDMCP), but I couldn't get this to work with GDM2/Ubuntu 10.4. Would this somehow also work to connect to a VNC server (like the virtual Windows system)? how to make Xorg provide a display for incoming VNC connections, but nothing on how to do the opposite.
I have VMWare on a notebook, guest Windows running on Linux host. The network in that virtual machine is configured as NAT. I want to share/transfer files from Linux (host) to Windows (guest). So I leave sshd always running on the notebook, I go into Windows and run an SSH/SFTP program. My Wifi router has address 192.168.1.1, my desktop has address 192.168.1.2 and my notebook has address 192.168.1.3. On the notebook, that SSH/SFTP program connects to 192.168.1.3 (i.e. the notebook itself) and everything works fine. But it's a notebook, and when I leave home with it, 192.168.1.3 is no longer accessible. How can I let the guest OS connect to the host OS when I'm away from my Wifi network?
View 1 Replies View RelatedI have CentOS 5.5 and try to create KVM virtual machine with CentOS 5.5 as a guest. But when I exec command:
virt-install --connect qemu:///system --name test --ram 1024 --file=/var/lib/libvirt/images/test.img --file-size=10 --vnc --cdrom=/var/lib/libvirt/images/CentOS-5.5-x86_64-bin-DVD-1of2.iso --vncport=10000 --accelerate --os-type=linux --nonsparse --livecd --hvm
how to connect OS "ubuntu 9:10" as the host, with Qemu as a guest.?I can not connect from the host to geust, how to connect??I use Samba to connect the host to the guest.I was able to ping from guest to host, but from host to guest can not ping .. why?
View 1 Replies View RelatedI have installed VMWare on XP(host) and installed Ubuntu 10.10 Guest on VMWare. I need to simulate remote server on my Ubuntu Guest and connect from XP to Ubuntu guest using WinScp or PUTTY. How do I do it? On my VMWare right now I have networking set as NAT.
View 2 Replies View RelatedI am currently running ubuntu on a qemu-kvm virtual machine, and the host is fedora. I would like to mount a folder of the host machine on my VM, but never succeeded. The result of the command is :
root@armnlib-kvm:~# mount -v 192.168.1.10:/nfs /nfs
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Thu Jul 7 06:02:43 2011
mount.nfs: text-based options: 'addr=192.168.1.10'
[Code]....
I am trying to setup a putty session to putty from one Ubuntu machine to another. I know how to setup to connect to the machine from Windows and I am using the same settings for the one I am trying on the Ubuntu machine but it fails to connect. It fails immediately so I believe that putty is not able to find ssh. Is there some configuring that I need to do.
View 7 Replies View RelatedI've installed VirtualBox OSE and have a couple of guest OS setup. I am running Ubuntu 11.04 and VBOSE version 4.x (the most current). Now this installs the guest OS virtual harddrives to a folder in my home directory. How do I get other users on the same host machine access to those virtual machines within VB? Currently logging in as another user and going to Applications/Accessories/VirtualBox OSE ... the list of guest machines is empty save of course on my login.
View 3 Replies View RelatedHow can I run LAMP (Linux, Apache, MySQL, PHP) in a virtual machine (Ubuntu in virtual box) and make it so the web server is accessible locally (and ONLY locally) on the host OS via an ip address?
View 3 Replies View RelatedI have a WindowsXP virtual machine which I need to isolate from the host machine completely (have the host act as a bridge but not be visible on the IP layer at all.) It still needs to have Internet access. Obviously it has to be able to contact the router but I would like to be able to block port 80 (or even just block all SYN packets addressed to the router.) I also want to allow port forwarding from the router to the virtual machine. I can use basic iptables but this is way beyond me.
The host OS is probably going to be Debian Lenny but this is not built yet so if someone can recommend a different distro which is as lightweight as possible but will support VMWare, iptables and tcpdump then that would be great. I was thinking of Slackware but I have not used it in ages and from what I can remember their is no real package management.
My company's default OS is Windows 7. I convinced my manager so that I could use Fedora 12, since I am mostly familiar with development environment in Fedora. However there are a few things I need in Windows 7, and I want to stop going back and forth in two OS'es in dual boot-up setting.
I've searched online for easy way to use the existing Windows 7 as guest virtual machine. I first tried VMware's Vcenter Converter Standalone in Windows 7, but it failed with some error code, and searching the particular error code didn't turn up any solution. I also tried to use Sun's VirtualBox, but I get segmentation fault error in Fedora. I tried to see if VMware server has a tool, but installation exists with an error, and searching the web for the error code didn't turn up anything either.... I wonder if I am having this much difficulties because I am using x86_64 version of OS'es.
Anyhow, if anyone has done it successfully - using existing Windows 7 as guest virtual machine in x86_64 version of Fedora 12.
I had Ubuntu guest installed on VMWare. The Host OS is Windows 7. But now I want to migrate it to Virtual Box. I migrated it, but it does not allow PUTTY to connect it. It says "connection refused". On VMWare on same host and same guest, PUTTY connection is successful. But it does not allow on Virtual Box. It says connection refused. Both on VMWare and Virtual Box, the guest Ubuntu is configured using NAT networking.
View 2 Replies View Related