This app embeds putty and allows you to save ssh and telnet connections (including post login commands). You can also save the connections and sort them however you like. It's great for organizing linux clustered servers etc... Tabs are also a plus (yes I know konsole does this part as well)So to the point at last. I finally upgraded to OpenSuSe 11.2 and I was looking for an app that does much the same thing.
View 2 Replies
I have a problem in connecting a new Linux box using putty.I have recently set up a new virtual machine using oracle virtual box , and in the virtual box i installed Cent OS 4.8 . I gave NAT connection.When i try to connect the Linux box using putty , i get Network connection Timed out message . When i try to ping from the host OS i get request timed out.
View 4 Replies View RelatedWhen I connect to a RHEL CLI via Putty, some folders are blue, some are highlighted green, etc etc.Does all that signify something? Is there a link to a site that tells me what it all means?
View 9 Replies View RelatedI Just recently switched all my desktops to Linux from windows, on windows i used kitty URL...,but in Linux terminal i couldn't find any work around for some of its functions, like :-
1)Open Winscp client by right clicking the window border.
2)CTRL+SHIFT duplicate the window
3)Highlight to copy and click to paste (i know pressing the middle mouse button in Linux would paste the highlighted text, but thats not possible when i am using a laptop.
4)Also I use NX(URL...) to ssh to the Xwindow... i am wondering if there are any other programs that allow me to do that (except the vnc stuff)
I have X Window running on one of RHEL Machine 192.168.2.2.I have logined through putty from remote Windows Machine 192.168.2.5. Now What I need to open the xterm (if I run the command through putty it should open xterm in the linux Machine).
View 2 Replies View RelatedSeemingly simple question, which yields slightly undesired results. Execute putty to start a script on a remote linux server which requires user input The remote script does a read -p "Please enter name" NAME I can use plink to execute a script over SSH, the following attempts and problems are shown below :-
Note the -load ns is to load a session that doesnt exist, ie ensure no defaults are used
1) plink.exe -load ns <ip_addr> -l <user> -pw <password> <script path/name> Problem) Doesn't allow/show user input, ie its non-interactive.
2) Add -t to allocate a pty :- plink.exe -t -load nc <ip_addr> -l <user> -pw <password> <script path/name> Problem) Ok, so now the user input can be seen, but I get Ctrl+H (^H) when backspace is pressed, ok if the user doesnt make a mistake!
3) Use putty instead with a saved session putty.exe -load "SavedSession" Problem) (a) Get a new window opened, not a biggy, but not as nice. (b) saved session cannot be easily moved. (c) Get password prompt, cannot provide password like with plink, I know I know, use keys, but this is a closed, private network, and its easier not to bother with keys!
So ideally, I would like the SSH to execute in-line, that is from within the batch file/command line shell I am in, not prompt for username/password, run the linux script and allow prompts and delete/backspace to work.
I have 2 computer: 1 computer install ubuntu v9.10, in this computer already installed openssh-server and openssh-client, and 1 computer install windows. In computer with windows , i used putty connect to computer with ubuntu, but i can't connect. I don't understand what's error.
In the Putty , i configured:
IP : IP address of computer Ubuntu.
Port 22
Connection Type SSH
This is error: "Network Error: Software caused connection abort"
In computer with windows, i can ping computer with ubuntu and in computer with ubuntu i can ping computer with windows.
Recently, Putty keeps intermittently freezing and locking me out of the system (i.e. I can't stop the session and I can't re-login via ssh again until I've gone to the machine and pressed "reset").
So far, it mostly occurs when opening a file in VIM, but it does sometimes occur when using tab to auto-fill a file or directory name at the command prompt.
when I try to connect via PuTTY from a windows machine I get " PuTTY Fatal error connection timed out. I try to do so via a router redirecting IPadr:86 to local adr:22 on the Linux machine.
I seems not to be a routing issue since the router is setup to redirect apparently correctly.
Well I have stopped iptables and selinux is disabled. The sshd deamon is running. I can logon with ssh locally "ssh webcamATlocal adr".
I am trying to play my audio files at work from my home computer over ssh. The computer I use at work is windows and so I use Putty to make that connection. However when I mplayer file.mp3, the file starts to play, but I am assuming it's playing on my home computer.....so, I am wondering, how do I forward the audio to my remote computer?
and no, can't use a CD... I work in a car with no CD player, and the computer is a Panasonic Toughbook with no CD-ROM... options are limited.
I had Ubuntu guest installed on VMWare. The Host OS is Windows 7. But now I want to migrate it to Virtual Box. I migrated it, but it does not allow PUTTY to connect it. It says "connection refused". On VMWare on same host and same guest, PUTTY connection is successful. But it does not allow on Virtual Box. It says connection refused. Both on VMWare and Virtual Box, the guest Ubuntu is configured using NAT networking.
View 2 Replies View RelatedI'm trying to do a ssh connection (using Quest Putty) from Windows to Linux. As linux are joined to Active Directory, is possible to do a SSO (using kerberos). If I connect from linux to linux using ssh, it works fine. If I connect form Windows (Win7) to Linux using Quest Putty or Centrify Putty, an error is displayed:
Code:
C:Program FilesCentrifyCentrify PuTTY>Plink.exe -A -K -v serverl001.jed
Looking up host "serverl001.buss.red"
Connecting to 10.16.44.234 port 22
Server version: SSH-2.0-OpenSSH_5.4
We claim version: SSH-2.0-PuTTY_Release_0.60_(Centrify_GSS_1.4)
[Code]...
Can you find my blind spot? I had PuTTY up & running untill I did a reinstall of Fedora13.I can ping 192.168.1.163 fine. SELinux is disabled. Firewall is default (SSH allowed on p22).I have just disabled the firewall with same result)
PuTTY reports:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.07.20 16:23:52 =~=~=~=~=~=~=~=~=~=~=~=
Event Log: Writing new session log (SSH raw data mode) to file: C:UserswimDesktopputty.log
[code]....
I can't connect to my Suse server by ssh (using putty) cause console shows me this message: connection reset by peer some times, other times It let me type the user but when I going to enter the password It reset the connection. What I did?? Reinstalled the ssh, but everything was same, the problem still appears. So I reinstalled the Operating System, now but when I going to connect to server the problem appears again! What could be the cause of this behavior??
View 3 Replies View RelatedI researched a long while and could not find an answer to these problems, so here I am. I have a debian server running on my home network. I have it running LAMP and it has a live website.
I have samba running and share files with my windows 7 machine, so they do connect.
When i try to use putty it always refuses the connection.SQLyog tells me off too, but it only cays it cannot connect.
I was checking into SSH, since that is how they are both trying to connect, but I can not find adequate info online for my problem.
I have debian lenny running, I was pretty sure it has ssh running, but i couldnt locate 'sshd'
Is SSH on there by a different name or do I need to install the service.
(ps - getting samba running was a nightmare, but i think it was windoze fault, i tried setting up the debian machine exactly how the guides said to do, but it never could connect and denied passwords constantly, then the next day after a few windows reboots had happened, all of the sudden it worked. Don't know what the deal was there. Could that be instrumental? Sorry I am a web dev and not a networker so this stuff is not my forte.)
i have to install app server on VM of Linux box. am able to connect Linux box via puTTY and Xmanager as root user. but am not able to connect as a normal user. in Xmanager i see network error. In puTTY console gets disappear
View 1 Replies View RelatedI am trying to setup a putty session to putty from one Ubuntu machine to another. I know how to setup to connect to the machine from Windows and I am using the same settings for the one I am trying on the Ubuntu machine but it fails to connect. It fails immediately so I believe that putty is not able to find ssh. Is there some configuring that I need to do.
View 7 Replies View RelatedI have used JellyfiSSH on Mac OSX which basically stores your ssh connection details so you can quickly open connections using the built in SSH client to various servers without having to type in all the details, is there are similar thing available for linux? I am using Ubuntu.
View 2 Replies View RelatedI am looking for a Linux equivalent of Paragon Partition Manager. I have several computers that I maintain for work, and the ability to take the image of these computers regularly would be greatly beneficial. I was previously using Paragon Partition Manager, however I would like to know if there is a equivalent of this software that I could use. I know that GParted works excellently in the actual partition management, however it does not actually allow to to capture images.
View 2 Replies View Relatedwas trying to access the server through putty, it immediately closed connection.i tried this a couple of times and still the same problem.
View 2 Replies View RelatedI've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies View RelatedI am getting trouble with knetwork manager. I created a new connection by scanning and connecting using knetwork manager. But every time connection gets disconnected and ask for password and again it connects.
View 8 Replies View RelatedOpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.
It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.
Im new in this world of linux and suse. I have just installed the opensuse 11.2 in a Dell Inspiron 5160. Such laptop has a BCM4306 Wireless LAN controller. When I tried to configure a wlan connection, I found that the firmware was not installed. After looking in different forums, I installed the firmware b43. Now, my wlan card is abled to find the wireless of my router.
I have tried to configure a connection with YAST as well as with Network Manager, but both cases failled. Specifically, when I use Network manager, Im able to see in the applet my connection, how strong is the signal, but I see a yellow symbol (in one forum, such a box is shown with a green symbol).
I have check many time all about the secutity, encryption, and so one and all seems to be correct. But when I open the mozila firefox or the konqueror browser, no chance to surffer in internet. Now Im just a step to become crazy. The drivers are ok, the information about the router and the keys are ok, but in such a way, I am still harmloss.
I am using a server where i need to login twice. The first time i login as my boxname and pass. The 2nd login is 'root' so i can access the content of the box (i dont understand it but that hasnt stopped me from using it as normal).Now i like a GUI so i can browse files easier and drag and drop multiple files instead of using the command line. WinSCP doesnt work as it locks up. I suspect its because there is a prompt to log in again.
What can i use to drag & drop files?
Well; soon my site will be down and my internet too.I am still unemployed and can't pay my bills.I wish I could get a job in Linux somewhere, but it doesn't seem possible.Does anyone get paid in Linux? So, was wonderin how can I continue my Linux experience with no internet connection?And, Does anyone know of a hosting site that would hold or distribute my creations URL...they will be deleted from servers in about a week.I only pay $7 a month for my site; but its $40 a month for internet connection.
View 14 Replies View RelatedI want to configure Internet connection in my linux os but don't know how to do it. In Windows XP the method is quite simple but in linux I know know what to do about, It has been very challenging for me to do it but don't knw how ot do it.This file I have to type at run "RASPPPOE.inf" to get list of available Internet providers.
In windows I do it in this way-
1.First go to My network places ->View network connection->Local area network->Properties->Internet Protocol (TCP/IP)->Install->protocol->Microsoft TCP/IP version 6(select)->Have disk->(then browse to get RASPPPOE.inf file from PPPOE folder)->click OK->select PPP over Ethernet protocol->Click OK->>continue anyway(two times if asked)-> Apply->OK.
2.Then got to run ->Type raspppoe (Enter)->one window will open->select the LAN card (where internet cable is connected)->Click on Query available services->Select Internet provider name and->Click on Create dial up connection.-> Then dial up will be created on Desktop where I enter my username and password to start internet.
with the ifup method everything works fine. But now I bought a wireless card, so I prefer to use the network manager to manage my connection. On my computer I need a static IP for wired connection, so I created a new wired connection and I called it "wired connection". But network manager always connect automatically to "Auto eth0" and I can't find how to modify this connection. Setting "wired connection" as default didn't change anything, probably becouse it need me to unlock the default wallet... Now, another problem, I really don't know why network manager applet doesn't appear on system tray, but I'm sure that I'm using it instead of the ifup method.
View 9 Replies View RelatedI have an Ubuntu development server and a Windows 7 workstation. I use Windows Gvim to edit files on the linux server, over a samba connection.Saving files from Windows change the Linux permissions in weird way depending on the Windows app I'm using and also depending on whether there's a file extension or not.Here are some testsNo extension; Notepad2: 644 to 764
matt@mattserver ~ % ls -l testfile
-rw-r--r-- 1 matt matt 0 2011-05-28 07:09 testfile
--- Save from Windows Notepad2 over network ---
[code]....
I just installed gewsense on my dell studio xps. I have a dual boot with windows vista. Problem is I cant get the internet to work via lan or wireless. I have read it could be incompatibility with my hardware but wanted to know what can I do to troubleshoot and resolve.
View 3 Replies View Related
