One of my colleague has created a LINUX machine with VMWare. This machine has a name such as S003AP03 and IP adress. Normally one can connect to the machine by using putty with the machine's name or IP-Address. But to this machine one can't connect it with it's name. Something should wrong.
Where can I make the correction?
Right now I have a machine set up running Fedora. I have configured inittab to accept Console Logins, but I am having problems getting my netbook running PuTTY to connect. How would I go about finding the Host Name and Port to connect to?
View 6 Replies View RelatedHow can I connect to Linux (which is in a VM) from the host PC using putty? I can ping the 192.168.1.108 from my host PC. And there is sshd process running on Linux. I choose the SSH to connect, but gives error.
View 5 Replies View RelatedI am trying to setup a putty session to putty from one Ubuntu machine to another. I know how to setup to connect to the machine from Windows and I am using the same settings for the one I am trying on the Ubuntu machine but it fails to connect. It fails immediately so I believe that putty is not able to find ssh. Is there some configuring that I need to do.
View 7 Replies View RelatedI am using CentOs 5.5.
I use Putty to ssh from my windows laptop to a remote CentOS machine. Is there a way to start a shell that doesnt dies when I disconnect so I can connect again and reclaim it?
i can't connect to my server using putty.
I have a virtual dedicated server, running - Linux Red Hat Fidora core 6- Pentium 4, 3ghz
I'm attempting to use Putty to log in SSH, but I'm getting an error.
Saying the sever unexpectedly close network connection.
I don't know if this has anything to do with it. This is a new computer, that hasn't logged in using putty before. Also I'm on a home wireless network. It dosen't seem to be a firewall issue, the error message pops up, when the firewall is disabled.
And I just had Go Daddy do a reboot. Oh, and I think I might have entered my password incorrectly a few times, last night.
I remember the Go Daddy rep, saying that my IP address may be flagged, but that it would unfilter and unlock it self within an hour or so. It's been over 24 hrs.
Before the password issue, i was able to log in.. But i can't now.
Others can log in. So there unable to duplicate the problem.
I'm new to Linux, and SSH.
Any help
I'm trying to install some software...
I've been allowed to work on the server of a forum. I was given the username and password, and with them logged in successfully on the server using PuTTY, but now I'm not sure what command I use to do anything to the users on the forum For example how would I change someone's username or password, etc.
View 3 Replies View RelatedI am not able to connect to server through putty, my collegue is able to connect to same server from his desktop through putty.
I am getting ssh session and after providing user id an password its stays still and no error message. firewall and se linux is disabled and also i checked tcpwrappers there is not restriction given.
when I try to connect via PuTTY from a windows machine I get " PuTTY Fatal error connection timed out. I try to do so via a router redirecting IPadr:86 to local adr:22 on the Linux machine.
I seems not to be a routing issue since the router is setup to redirect apparently correctly.
Well I have stopped iptables and selinux is disabled. The sshd deamon is running. I can logon with ssh locally "ssh webcamATlocal adr".
I can log in when using the keyboard from the server no problems but when I try and log on from my laptop this morning using putty I can connect type in my user name but when I put in my password it says access denied now I also can not FTP and webmin does not connect to the server but I can get to the web pages no problem with a browser so can this be fixed or do I have to start from scratch again to get me logged in with putty and webmin somehow the password is not working in ssh.
View 8 Replies View RelatedI can't connect to my Suse server by ssh (using putty) cause console shows me this message: connection reset by peer some times, other times It let me type the user but when I going to enter the password It reset the connection. What I did?? Reinstalled the ssh, but everything was same, the problem still appears. So I reinstalled the Operating System, now but when I going to connect to server the problem appears again! What could be the cause of this behavior??
View 3 Replies View RelatedI gannot connect to my Linux server using ssh and get Server refused to allocate pty message. Before it was working fine and today the problem appear, i don't know why this problem. Not that i'm new on linux system. my linux version is Linux 2.6.18-8.el5. I only found the same topic in this forum but not find solution, i try ssh with -T but still not working.
View 1 Replies View RelatedI researched a long while and could not find an answer to these problems, so here I am. I have a debian server running on my home network. I have it running LAMP and it has a live website.
I have samba running and share files with my windows 7 machine, so they do connect.
When i try to use putty it always refuses the connection.SQLyog tells me off too, but it only cays it cannot connect.
I was checking into SSH, since that is how they are both trying to connect, but I can not find adequate info online for my problem.
I have debian lenny running, I was pretty sure it has ssh running, but i couldnt locate 'sshd'
Is SSH on there by a different name or do I need to install the service.
(ps - getting samba running was a nightmare, but i think it was windoze fault, i tried setting up the debian machine exactly how the guides said to do, but it never could connect and denied passwords constantly, then the next day after a few windows reboots had happened, all of the sudden it worked. Don't know what the deal was there. Could that be instrumental? Sorry I am a web dev and not a networker so this stuff is not my forte.)
I'm using putty 0.60 (on Windows Vista) to connect by ssh protocol to other Linux computer. I have a problem with VI/VIM. When I key button "n" or "b", it returns me n^Z or b^Z.
View 9 Replies View RelatedCould you provide me steps on how to connect the guest OS (RHEL 4) using Vmware thru host OS( Win 7)
I am using Bridged connection. How to choose the static IP to be added in the Host OS.
I remember it being really easy to add a printer attached to another computer using Ubuntu, but I don't remember exactly what made it so easy. All I know is that now that I have switched to Kubuntu the process has become much harder because now I have to find out some special locations, numbers etc. for it to connect to the printer. It's connected to a Windows XP machine on the other side of the house.
It says alot about 'contacting the network administrator' if I am unsure about what to put in. But I am more or less the network administrator. how to find out what numbers to put in so that my Linux machine can connect and print to the Windows machine? Or maybe someone knows a few commands to share? I go to Applications > Settings > System settings, Printer configuration, New Printer, New Network printer, and then there are a few options but I don't know which one to choose. Windows Printer via Samba, I guess? Then in the box that says smb://[enter stuff here] I need to put in info but I don't know how to find that info.
i am trying to connect my linux machine to my tv. I have a nvidia 8400gs in it and and connecting to the tv via dvi to hdmi cable. I cannot see the top and bottom of the screen. also my sounds doesn't work. but the sound is something with my tv i gotta fix.
View 1 Replies View RelatedI keep trying to connect my iPhone to my Ubuntu 10.10 machine, and it keeps denying me from mounting it! I want to transfer my songs I have downloaded on the Ubuntu One Music Store to my iPhone!
View 7 Replies View RelatedI installed XRDP on my home machine, made sure the service was running, NAT'ed ports 3350 and 3389 TCP to the machine in my router and punched corresponding holes through Guarddog on these ports on the machine as well, but connecting with: rdesktop -f "my IP here" from my workplace doesn't work. I get "unable to connect".
I have a feeling, it's still the firewall. Do I need to tick permitting the rdesktop protocol in both the "local" and the "Internet" zone or do I need to also establish specific custom rules?
I am having problems connecting to my Fedora machine wirelessly. What i mean is that if i try to access samba \192.168.1.93 rb while connected to my wireless network i can't connect.The only way I can connect to this machine is if i connect my laptop directly into the router then i can successfully connect.Does anyone have any idea why this is happening? The strange this is i used to could connect wirelessly.
View 1 Replies View RelatedMy sid machine currently can't access debian.org, through apt hitting the repositories, surfing through Epiphany or Iceweasel, or pinging the server directly. It was working fine until about four days ago. However, if I type in the IP address, I can access the website, so it must be some sort of DNS issue. My home server, running Squeeze, can access debian.org just fine. Any suggestions for how to fix it?
View 1 Replies View RelatedI installed samba and samba-client (sudo yum install samba samba-client) but I still cannot connect to this Windows machine.I installed samba, started the samba services (although that may only by necessary to connect into Fedora?), and even restarted the computer and I still cannot do this, I have been googling like crazy and only se articles on how to make Fedora a samba server...
View 3 Replies View RelatedI just started to run Fedora/Linux on my laptop... I was using XP and using putty to connect to Linux servers at work. I am assuming I can use the terminal editor supplied with Fedora to connect to remote linux server? Can I uses the terminal to connect to remote linux server? How do accomplish this?
View 6 Replies View RelatedSo here is what I am trying to do. I want to connect my Open Suse 11 machine to the internet. I am almost there.
1. I configured my network card and eth0 is up.
2. I configured my DSL with user name and password and I am authenticated.
3. An IP address is assigned to me and the DNS servers are retrieved.
However I cannot ping or visit any website I use the YAST automatic configuration and kinternet to connect. Here are the gritty details
[Code]...
I do see that kinternet has trouble reading /etc/resolv.conf. It says 'permission denied' although read permissions are set on both /sbin/route and the path that it links to. This should not matter however since the existing entries are already there and valid. I also tried to turn off the firewall suspecting it could be a problem.
So I am being authenticated successfully ( verified with the logs ); assigned an IP; the route seems ok; firewall seems ok. But I cannot browse or do internet things I have been tweaking settings for 3 days now and all seems in vain. Do enlighten me on what I am doing wrong. I bet its something silly that I overlooked. I have had success configuring the same thing in red hat linux and browsing the internet without trouble. Is there something OpenSuse specific that I am missing ?
regarding a remote connection from my workplace to my home system. On my home a have a connection to the ISP and the provider is allocating a dynamic IP to my router. How can I connect from my work computer to the home computer? There are other application or other stuff for making this possible?
View 5 Replies View RelatedI have created a small network using Win7 (not a home network, it's a workplace network), but cannot see the Win7 machine from my Linux box (openSUSE 11.3 32 bit). I am getting the error message "Empfangen der Speicherliste vom Server ist gescheitert" ("couldn't receive storage list from server" or so), wenn I try to connect via "Locations -> Server -> Windows Network -> 172.168.178.2 (which is the Win7 machines local IP address).
Disabling the firewall doesn't help.
My setup is a DSL router to which all my computers are connected.
Despite searching the inet for hours I couldn't find a solution.
Another problem is that from the Win7 machine I can only access the public folders on the Linux machine using the root login (not the user I used to make the folders public).
I have a main Ubuntu system and a virtual Windows system, set up using QEMU/KVM. So, I can start Windows using virt-manager and connect to it using a VNC client.But what I really want to have is a new Xorg display that is connected to this Windows system, so that e.g. CTRL-ALT-F8 shows Ubuntu, CTRL-ALT-F9 shows Windows. That'd be a real alternative to a Linux/Windows dual-boot setup.
I know that GDM had some option to connect to another X server (XDMCP), but I couldn't get this to work with GDM2/Ubuntu 10.4. Would this somehow also work to connect to a VNC server (like the virtual Windows system)? how to make Xorg provide a display for incoming VNC connections, but nothing on how to do the opposite.
My school are cutting costs.I suggested they go open source.They said if I could find out how then they would consider it.Basically they want a mixture of windows and ubuntu clients.What I would like to no is how a ubuntu machine can connect to a server (SAMBA I think) so that it can access our home folder like the windows machines do.
View 1 Replies View RelatedI'm using Ubuntu 10.04 LTS. How can I connect to a Windows machine? I'm trying to connect to a VirtualBox machine with Windows XP on it. I can connect from the VirtualBox to Ubuntu. But, can't find a way to do it from Ubuntu.
View 8 Replies View RelatedI have a Posh new 64bit Ubuntu computer with one of the latest distro's on it,works loverly.this is in my front room.In my beroom I have an older box with Xbutu 10.10 installed which I want to use to play movies into my telly that are stored on the ubuntu box which is connected to the same sky router.I tried ubuntu before xbuntu to achieve this ,which worked with "connect to server",but the bedroom machine doesnt have the Ooomph to play movies without clipping the video part.I was hoping Xbuntu would free up enough resources to enable the playing of movies, and it is indead more suitable,but I cant work out how to connect to the files on the ubuntu machine.
View 1 Replies View Related