Ubuntu Installation :: 10.04 Black Screen On The Live CD Or When Trying To Install?
Apr 30, 2010
I want to make a clean install of 10.04 instead of just upgrading from Karmic.However when I run the boot cd I get the new Ubuntu boot up screen (with the five dots) but after a while I get a black screen and at the same time the cd stops running in the drive.The only thing I can do is pressing down the start button until my computer shuts down.I do get the menu to choose to run the live cd or make a new installation, but whatever I choose, I end up with the black screen.
I'm trying to install on an older IBM Thinkpad R50e, with 500 mb RAM so I figured that it was simply just too old to run the new ubuntu. The strange thing however is that the cd is actually running fine from within my Virtual Machine. This I don't get
View 9 Replies
ADVERTISEMENT
May 25, 2011
don't have the knowledge to know what to do next.I'm trying to run the live disc of 11.04 as I want to dual boot with it. I've checked the MD5 and checked the disc for faults and they're ok but I just end up with a black screen. The graphics card is ATI 4550.
View 2 Replies
View Related
Oct 21, 2010
My ubuntu desktop died yesterday. I rebooted my computer in like 1 month and after grub, the screen is all black and it stays there... forever. So I decided to see if the problem persists or not when I completely upgrade my ubuntu to the latest version. So I downloaded the latest ubuntu iso from the site, burned it, and booted from CD and I see several selections to choose from the menu list. The second one was "Install Ubuntu". What I'm worried about is I don't know whether selecting 'Install Ubuntu' will erase all my previous data, or there will be an option to upgrade Ubuntu without erasing all the data. Is it safe to install from the live disk? Will my data be safe? Is there any way to upgrade my Ubuntu on the HD to the latest Ubuntu from a live disk?
View 3 Replies
View Related
Mar 25, 2011
I try to boot the live CD and try xubuntu without installing, and my computer just hangs at a black screen, cuts off, then goes black and repeats. I also tried just installing with nomodeset enabled and it seemed to install fine, but it did the same thing as it does with the live cd, GRUB wouldn't even load... the computers specs [URL]
View 3 Replies
View Related
Mar 18, 2011
Apology for dual post I realized was in wrong place.Created verified 11.3 live CDInserted, restarted, welcome screen, choices next, I choose installation.Kernel loaded then black blank screen guess you call it a freeze upWindows 7 Home Premium 64-bit Edition Partitioned plenty room
View 9 Replies
View Related
Nov 7, 2009
I get past the count down. The bars run across the top. Then my lcd monitor announces it has no signal and goes to sleep. Had this problem with earlier versions of Ubuntu, particularly 8.04. Was fixed in 8.10.
get Fedora 11 up and running?
View 2 Replies
View Related
Oct 9, 2010
I'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
View 1 Replies
View Related
Jun 1, 2010
When i boot the fedora image from a dvd i'm not being taken to the fedora live system screen, instead i see a bunch a words on a black screen (looks like DOS)...am i having compatibility issues or what? ive tried 32bit, 64bit versions as well as different desktops. does anyone have any ideas? my laptop is brand new: toshiba e205 running windows 7 ultimate..
View 2 Replies
View Related
May 27, 2010
I've been trying to install Ubuntu 10.04 on my Dell XPS 630 but every time i select INSTALL or TRY UBUNTU when booting from the cd, all i get is a black screen with a white blinking cursor. I have tried various options in the F6 menu but nothing has worked. I know the CD is working because I was able to install it inside Windows and dual boot, but I wish to do a fresh install.
View 9 Replies
View Related
Sep 13, 2010
I'm so desperate about my problems with installing ubuntu. I got a Fujitsu Siemens Computer AMD Athlon 64 Processor 3200+ 2.01 GHz and 1,50 gb RAM. I got Windows XP home edition on my computer, but i wanna completely switch to ubuntu.
At first I tried to install it with wubi, but it won't work always the same problem.
Then I tried it with the Live CD and tried demo and not install, but it fails. First there is a purple screen with a keyboard and a little guy in a circle, then there's a _ in a black screen blinking, and after that my monitor goes into standby mode. The CD is still loaded from the harddrive, but nothing happens. It feels like the Screen froze down and I can't see anything, what's going on.
I tried it with just installing, alternate install, but it's everytime the same problem.
View 4 Replies
View Related
Dec 5, 2010
After install I tried to install my video. Which happens to be nvidia and of course after reboot I now get a black screen showing login and password but it will not work I can only get in through recovery. I have a nvidia ge force 9500gt.
View 6 Replies
View Related
Apr 29, 2011
after i installed ubuntu 11.04 and restart .. nothing appear only black screen i think my problem in my vga card ....i have switchable one in my laptop (ATI Radeon HD 5600 /intel )
View 9 Replies
View Related
Jun 11, 2011
I boot from my USB, and when I try to install my screen starts showing a bunch of white words while scrolling, then my screen goes black and my laptop stops running even though it is still on. I have also tried just running it, but the same thing basically happens.
View 5 Replies
View Related
Sep 1, 2011
I have a 8.2 MBP with a 1680x1050 screen and a 6490M graphics card. I'm trying to boot from a usb stick ubuntu live. I'm able to get to the ubuntu menu, asking to install or start live boot, but when I select live boot I get a black screen( backlight is still on but entire screen is black). I've waited at that screen for quite some time with no luck.
View 2 Replies
View Related
Jan 12, 2010
I burned a copy of Ubuntu 9.10 and decided to use it to build up my little server. All was well initially. The CD booted, the language selection came up (I selected English), then there was the option to Try, Install, boot from first hard-drive, etc. I chose install and figured I'd nuke the original drive since everything that I need is off there. The little Ubuntu logo came up (it was shining/pulsating) for about 5 minutes. This went on for some time (the DVD-ROM spinning the entire time furiously) and then..The screen went black and there was a message saying that there was no input to the monitor (as some monitors are prone to do if you unplug/loosen the cable.) I rebooted, burned new CDs, etc. To no avail!
I have an HP (quite reliable in the past.)
* 2.80 Ghz
* 1 gig RAM
View 2 Replies
View Related
Feb 1, 2010
I have a Lenovo SL510 thinkpad (CPU 1.80GHz / 2GB / 250GB SATA / Intel GMA X4500 / 15.6" HD LED says the website), totally fresh, just got it today. My goal would be to install Kubuntu 9.10 on this machine. When I try the live CD, screen just goes black, after a while it plays what I assume to be the welcome music. If I try the conventional install screen is just black. The safe graphic mode yielded two grey _, one in the 1/5 and one in the 4/5 of the screen.
View 9 Replies
View Related
Jul 3, 2010
I am installing 10.04 on a HP pavilion. I have downloaded the ubuntu-10.04-desktop-i386.iso (live CD). When I try to boot or install from it, the screen shows the "ubuntu" with the red dots for a minute and then a black screen with no action from the hard drive or the CD drive. I think it should be asking what language I want but presing enter does nothing.I have been using Ubuntu since 2006 and after yesterday's repartition I installed 6.06 from a live CD so I know I can install from a CD.
View 6 Replies
View Related
Jul 29, 2010
I'm trying to make a complete install of ubuntu 10.4 on an old PC.When I boot from the CD, a text screen is displayed: "PhoenixBIOS Utility"
Code:
BIODate: 09/14/99
CPU type:celeron
[code]....
View 3 Replies
View Related
Mar 17, 2011
I recently decided to give Ubuntu another try after a break for a while, and have hit a bit of a road block The live CD booted fine, ran, installed, all flawlessly, so it's now a dual boot with Windows 7. Only issue now is when trying to load the HDD installed Ubuntu, it just hangs on a black screen, no HDD activity light or anything. First up my specs code...
Next, what happens in detail:
Machine posts, loads boot loader with OS options. Whether choose Ubuntu or recovery Ubuntu, it always hangs on black screen straight after that.
Next, what I have tried to fix it so far:
Tried pressing 'e' and replacing the quiet splash with nomodeset, same result with both normal flavour and recovery.
Tried copying the xorg.conf from the live CD filesystem to X11 folder on main system drive. Also tried editing it to try and use generic vesa driver.
View 9 Replies
View Related
Mar 17, 2011
I am trying to do a dual boot of XP and ubuntu. I have 3 hard drives and I plan to put ubuntu on one of them. I have created a DVD from the ISO for 10.10 using programs and methods recommended by ubuntu, and it burned correctly onto the DVD. When I boot with the dvd in the tray the computer says something about linux iso then the screen goes black with a Human=Keyboard symbol at the bottom for a few seconds. Then my screen goes black with a blinking cursor in the top left of the screen. I have let it sit for a while and the PC shows no signs of drives working.Also if I remove it the PC automatically boots to windows.
View 5 Replies
View Related
Jul 19, 2009
why do i get the black screen at install just after when it loads
View 3 Replies
View Related
Mar 2, 2010
I have been using OpenSuse at work for years. My Windows 7 machine crashed on me. Instead of spending the time to fix it, I decided to take the plunge and install 11.2 on my home system. I have 4 one TB drives. My RAID card has a 2x2 1/0 RAID array defined (sdb, sdc, sdc, and sde). A fifth hard drive, outside of the arrary, which is a 250GB drive (sda). It is a software RAID. Here are the partitions I set up in the installer.
On the raid:
1.75 TB on /home
2.01 GB on swap
48.55 GB on /tmp
Off of the raid:
sda1 115 GB /
sda2115 GB /boot
(I know these are really big but I did not want to put any data outside of the RAID) In the final Installation Settings screen, I chose Booting and change from booting from the MBR to the /boot partition. The boot loader type is Grub and the status location is at /dev/sda2. I select Install and it installs without any error message.
After it installs, it restarts and I press ESC to see what is happening. It skips boot.cycle and continues to load to "starting HAL daemon ...done" and then the cursed black screen. I cannot SSH into it. It just sits there and I have to do a hard resest. Once I restart it, it boots into the non-RAD drive I get the follwing error message:
GRUB ..(it went to fast for me to get the rest of it)(hd1/1) message: file not found and I get the option the change the boot options of the Desktop -- openSUSE 11.2 and Failsage -- openSUSE 11.2 . I select e to edit the boot section of desktop and see
root (hd1,1)
kernal /vmlinz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-ST32508...
intrd /initrd-2.6.31.5-0.1-desktop.
I tried changing the root (hd1,1) to 0,1 1,0 2,0, etc with no luck.What do I do? I need to boot into OpenSUSE and finish the cursed installation.
PS: You can tell I work IT with the uber amount of details I put into this
View 6 Replies
View Related
Feb 8, 2010
I've been using Ubuntu for about a year or so and have never had any problems installing it up until now.
I can boot from live CD for 9.10, but if at any point I attempt to install it to my hardrive, it either locks up or the screen goes black. Sometimes I'm able to start the installer, but the screen will go blank. The most progress I've been able to make on the install was up to 98% before it locked up, every other time I've gotten a blank screen or a lock up around 40-60%. After a hard reboot I get an error that reads "DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER"
This problem doesn't only occur with 9.10, but with every other linux distro I've tried on it. My first attempt was with Ubuntu Studio, but I got similar errors. I've searched literally for hours and have found nary a solution that even comes close to solving my problem. using HP Pavilion a404x desktop
View 5 Replies
View Related
May 11, 2010
I downloaded and burned Ubuntu from ubuntu.com (64bit version) while in windows 7 64 i popped the install disc in, and it went into a setup in which it installed it asked to reboot, and I allowed. upon reboot boot I could choose either Windows or Ubuntu, so I picked ubuntu and off it went. It started to boot into the (Ubuntu) OS, it shows the little ubuntu thing, then the display goes black, like there is no signal to the monitor. The PC still runs, and reconizes when I plug in an iPhone or something, there is just a black screen though. I would like to know how to go about fixing this?
View 3 Replies
View Related
Nov 30, 2010
I did a LiveCD to USB install, following the directions I found at [url] When I went to reboot to the USB stick, all I get is a black Screen (monitor is on and lit, just nothing on the display) No cursor or command prompt. I've tried holding shift to bring up the GRUB menu, changing splash quiet to nomodeset, or just adding nomodeset after the splash quiet thing. I've even tried xforcevesa instead of nomodeset still black screen. Looking at the logs nothing is current as of the last time I tried to boot the computer, it's strictly what was written when I installed it to the stick. Other things I've checked/tried, Pressing CTRL+Alt+F1 at GRUB to get TTY, all I get is that blank screen. I've Checked etc/default/grub to ensure the timeout was higher then 0. The Install CD seems to be OK but I have (as it did another install successfully) but I haven't done any throughal checking of it (there was no check this disk on the first screen of the LiveCD) The USB sticks also seem to be ok (in windows though). Using the disk utility on the live CD I did check the file system on the USB stick, the "/" partition came up clean. Anybody have any other thoughts on this install, any thing else I can check?
View 9 Replies
View Related
May 29, 2011
I run a live cd I downloaded, right? Everything goes fine - it installs with no real issues whatsoever, when all of a sudden after the install it boots to nothing but the famous black screen with a white, blinking dash.So, what do I do? It was installed on a Dell Inspiron 9300 laptop, and I ended up completely wiping the XP drive to do it
View 4 Replies
View Related
Nov 18, 2010
I've been installing Linux Mint with OSX on a bunch of iMacs, and its been working perfectly excpet for one of the iMacs. The screen will just go black when I boot from a live CD, but I can hear the login sound play. It's strange because all of the other iMac's run the live CD just fine. What could the problem be? I don't know what I can do to troubleshoot this problem.
View 3 Replies
View Related
Jun 24, 2010
I use the usb-creator tool to create a persistent usb live-cd. Works like a charm, only, every time I boot it asks me if I want to try (live cd environment) or install.Id like to get rid of this screen. It just needs to boot into the live-usb environment.
View 1 Replies
View Related
Aug 22, 2014
I thought I'd breathe some new life into my aging PowerMac G5 desktop computer by installing debian. I burned the CD and ran the installer and everything installed okay, but when I went to boot it up for the first time, the screen blacked out after a few seconds of scrolling text and shows no signs of life after that. The computer just stops sending video to the monitor, and the only thing I can do is shut it down by holding down the power key.
View 13 Replies
View Related
Mar 8, 2010
I've just put a fresh install of 64 bit Lenny on my new HP server. All went well so I thought to install KDE. On reboot, the screen just goes black.Could I have some helpful suggestions on how to start working out what the problem could be?
View 7 Replies
View Related
