I just immigrate from Windows XP to Ubuntu 10.10 ( Ubuntu as OS Principal no Dual Boot ) I have a such problem with SKYPE, I talk with someone who had a webcam and after 5 - 7 mn it crash and the menu hide and everything even desktop background, and it shows a blank black screen I don't know what I have to do, I'm sick of tired of windows' blue screens
View 2 RepliesI'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
so I had a black screen when I was starting up my PC instead of the normal Ubuntu with the dots underneath. I have Ubuntu 11.04 on a dual-boot with Windows Vista. It would still boot normally and work fine but I wanted it with the Ubuntu and dots etc.
After looking at many sites to try and fix it that didn't work I found this: [URL]. That didn't work so I found this next: [URL]
I did what it said by removing
Code:
vt.handoff=7
Then when rebooted I got the Ubuntu with the purple background and dots but the boot would hang (always when all 5 dots were orange). I booted into recovery mode and I chose "File System Check" on reboot and it would get to the bit with 5 orange dots then it would check disk for errors and go to login screen then work fine.
If I added vt.handoff=7 it would boot normally with a black screen again.
RESULTS.txt is from when I had vt.handoff=7 removed and I was in Recovery mode>resume normal boot>"sudo bash ~/Desktop/boot_info_script.sh".
RESULTS1.txt is from when I booted up with the disk check and was in Terminal.
EDIT: Also just recently I'm getting a lot of boot hangs, freezes (where everything on screen will freeze and if I was playing music in Banshee it repeats the last 3 seconds until I hold down button on PC), and it will sometimes just restart randomly. Not sure if that related or not...
I installed Skype 2.1.0.81 using Software manager on Ubuntu 10.10. Everything is working fine with exception of incoming video. All incoming video is displayed as a black screen. From Google I learned that this is a typical issue with Skype on Ubuntu. I tried the instructions but none of them are working for me.
View 1 Replies View RelatedI have Fedora12 and it was working fine all through. I Installed Skype yesterday and since it was working, I installed the following using instructions from a blog. These were to install
yum install libXv.i686*
yum install libXScrnSaver.i686*
yum install qt.i686
yum install qt-x11*.i686
yum install libsigc++ libsigc++.i686 qt.i686 qt
Skype started to work well. However, after I rebooted the system, all I get is a blank screen with a blinking cursor. I am able ot get to tty by doing ctrl+alt+f2 but am not sure how to proceed from the above. I also erased the above packages thinking that that might solve. But it hasnot solved the issue.
I am installing 11.04 on a Gigabyte E7AUM-DS2H with an onboard GeForce9400. I'm trying to turn this into an XBMC htpc. I'm not using xwindows or anything like that. Going straight to console for now. I'm experiencing the GRUB Black/Blank screen. I just don't know what else to try...
1. I've changed the kernel boot options, i.e. nomodeset
2. I've toggled the GRUB_GFXMODE=640x680 line
3. I've remembered GRUB-UPDATE
4. I can get into GRUB menu using SHIFT at bootup, messing around with settings and CLI there
5. I started with default nvidia drivers (not good), and then installed nvidia-current - that works better.
6. At the blank screen, I can hit ALT-F1 into console/tty fine.
7. If I use nosplash --verbose, I get a long wait with a blank screen, then the last bits of the bootup log and the login prompt.
8. And stuff I've forgot I've done....
Now what I really can't understand is that I have XBMC installed AND working beautifully. I can set XBMC to autorun with no trouble at all. It's just the period between bios and XBMC that it all goes dark. When I quit XBMC, I get a blinking cursor, which I can F1 to the console. What is it with GRUB??? What am I missing? Why is this so difficult? I COULD live with it, but its just not right, and I want to get it right.
During the upgrade process, all the files appeared to install correctly and the computer rebooted as expected. It then showed the openSUSE splash screen but eventually that went dark and there was no display. Rebooting again did not help. Hitting Ctrl+Alt+F1 results in a corrupted display. I'm guessing this is an issue with the video driver? Not sure how to troubleshoot when I can't even get a terminal window open!
HP Pavilion dv6500 laptop with an nVidia GeForce 8400M GS.
I have just installed Fedora11 on my machine - the installation failed to start the x server so I had to install with the textbased installer. When the installation completes, I boot up and first I update Fedora with "yum update". Then I install a nvidia driver with "yum install kmod-nvidia". Then I run nvidia-xconfig to make a config file. But when I try to run "X", I just get a blank screen. I can run system-config-display fine, and setup my resolution etc. The log doesnt seem to give me any errors.I have two Geforce Fx3500 card in the machine.
View 10 Replies View RelatedApology for dual post I realized was in wrong place.Created verified 11.3 live CDInserted, restarted, welcome screen, choices next, I choose installation.Kernel loaded then black blank screen guess you call it a freeze upWindows 7 Home Premium 64-bit Edition Partitioned plenty room
View 9 Replies View RelatedI have just installed Fedora11 on my machine - the installation failed to start the x server so I had to install with the textbased installer. When the installation completes, I boot up and first I update Fedora with "yum update". Then I install a nvidia driver with "yum install kmod-nvidia". Then I run nvidia-xconfig to make a config file. But when I try to run "X", I just get a blank screen. I can run system-config-display fine, and setup my resolution etc. The log doesnt seem to give me any errors. I have two nvidia Fx3500 card in the machine. I have tried the 173, 185 and 190 driver - same thing.
View 2 Replies View RelatedAfter installing debian squeeze I tried installing a nvidia driver. I had to type: /etc/init.d/gdm3 stop The nvidia driver wouldn't install because the 'make' command was missing in a path or something. Now I cannot get the GUI anymore. startx gives me a blank screen rebooting the computer gives me a blank screen. I can only boot in recovery mode. but the nic doesnt work so no internet connection.
View 1 Replies View Relatedthis is my first time doing a custom partition, I tried to do it with only the assistance of reading as I go, but I don't believe I found enough information last night. What I am trying to do, is put openSUSE on 200gb out of 500gb space on my external hard drive, as well as on 50gb space out of 110gb on my internal hard drive. The remaining 60gb space on my internal drive is going to be for microsoft windows. The remaining 300gb space on my external drive will be storage space. It seems like what I want to do is achievable
What I want is to have my main openSUSE on the external drive (primary partition I think?), with the GRUB loader so that when the external drive is not plugged in, my little brother can use windows on my internal hard drive. I tried this last night, and when installation had finished, I rebooted my computer and the screen was just blank black with the flashing white line as if waiting for me to type, although it would not allow me to type when I tried. It would be great if someone could tell me the order in which to partition, including the terms primary partition, extended partition, and logical partition, as needed.. I don't want to permanently muck up this machine.
So after I went to OMG ubuntu site and downloaded "complex shutdown" since it looked useful and I needed it I installed it..but it doesnt seem to start up for some reason so when I went to uninstall it software center went "blank" just a grey screen with the black toolbar
View 2 Replies View RelatedI am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies View RelatedI was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View RelatedWhen i use my computer (whether it's going online, typing, playing a flash game, or coding) I get these "Black Flashes" that are becoming longer and more frequent. A "Black Flash" is when my computer screen turns blank (but you can still see the backlight) and i have to press the NUMpad ENTER button, shake my mouse furiously, or click my mouse, which sometimes causes undesired actions, but gets me my screen back. sometimes the Black Flashes last a milisecond or 5 seconds or i have to hold the power button and restart because it won't come back on.
Specs:
Toshiba P205-S6337 Laptop
Ubuntu Karmic Koala
2.39 GB of RAM
[Code].....
It took me a while to find a post that solved my problem, so I thought I'd try to make it easier for others with the same problem to find the solution.If you are using Skype with a dark themed lucid lynx 10.04, you may find that your Skype menus appeardark and unreadable, and that tooltips (when you move your mouse over a contact) appear pale and unreadable. You can find the solution here:
View 5 Replies View RelatedI can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedI turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies View RelatedWhen I activate the Ambiance theme, skype, opera, and probably one or two other applications have black menus with black text. It seems like the black background colour is being used from the Ambiance theme, but the menu text colour is not.
Could it be related to qt4? I just installed Opera qt4 because I read somewhere that qt4 would keep it closer to the theme or something.
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies View RelatedThe day started as usual until I got the very bright idea to install Ubuntu. A new OS along side W7, that sounded great. I checked some guides on the Internet, it was all very straight forward. Install it and Grub will show you the OS:es when you boot up. I installed Ubuntu, rebooted. After the BIOS messages the screen goes blank and my screen on-button begins to blink, as if trying to find a signal, I press enter, it reboots instantly. After BIOS messages I get to a screen that says "GRUB error: uknown filesystem grub rescue>"
I've looked through everything here and nothing works. I've tried to fix the mbr-thingy using Windows Repair and even though it says "one partition was updated with new boot-thingy" when I reboot, I get into that very same grub rescue. I think my setup has something to do with it. I run RAID0 (2x360Gb hard drives), first having C: at 50Gb and then the rest as F: for programs and such. What I did was that I shrunk the F: part and then used that as partition for Ubuntu. Also please have a look at these screenshots, my partitiontables and such seems completely wacky to the raid: Where should the boot-loader go? I'm very, very new at this. I've had Ubuntu Netbook remix on my netbook for a time but still treat me as an utter beginner.
I fixed this issue on 10.04, but just recently (1 hour ago) upgraded to 10.10 and am having the same issue. Machine boots fine, but the screen is blank for most of the boot, and plymouth is up for about a half second before I get to the login screen.I've tried searching the threads, but for the life of me I can't find the solution and can't remember what I did to fix it on Lucid.
View 4 Replies View Relatedlike any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
i just fixed my old-ish laptop (pop accident) and instead of putting window on it my dad talked me into trying ubuntu out, gotta say love it, fast and everything but having major problems. i have a lenovo 3000 v200. everything is the same as out of the box except the keyboard, only thing i really needed to replace.
ok problems
1) wireless is not working: i have the switch on (side of the laptop) and bluetooth lights up but wireless doesnt. (Intel PRO/Wireless 3945ABG). now i just learned about 'rfkill list' it shows that there is a soft block on the wireless. tried " rfkill unblock 0" nothing happened. also when i tried finding out wat kernel im using " uname-r" to find out more on why its not unblocking, the CLI says "comand isnt found" next two problems are small but are still frustrating
2) built in camera: the green light is on next to the lens but when trying to test the camera on skype or a photo program the video feed/ picture is black, or blank. not sure what i can do to fix that.
3) fingerprint scanner: yes i have one, i know its not efficient but I still like using it to login in instead of typing. im not sure how to get linux/ubuntu to recognize it if it even is. not sure how to set it up if it is recognized.
i would like to fix the wireless more than anything, if i can fix the camera and scanner then yeay, otherwise i can survive. oh and note i did try using the "additional drivers" app. nothing popped up.
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
I've been running Ubuntu 10.10 very smoothly for a while now. Decided to upgrade to 11.04 - managed to corrupt the hard disk the first time by letting the laptop hibernate part of the way through but reinstalled from a live CD of 11.04 and it's now working except for this issue.
If I shut the screen on my laptop (or press the screen off button) either the screen won't come back on or it will but frozen (I can move the mouse but not click on anything etc.) In this state music continues to play (from spotify under wine) and if I press my hibernate shortcut (power button) the computer hibernates, only to wake into the same situation. I've got a Dell Latitude D520, upgraded to a bigger hard disk and more ram - the ubuntu partition has 50gb. Windows is working fine.
Edit: I noticed a sticky thread which includes something about a blank screen but I think this is a different issue?
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies View RelatedAlright guys. I need to find a way to enable a black screen screensaver (or turn off the monitor, or something to avoid burn in) while the machine is sitting at the login screen and completely turn off the ability for the computer to sleep. how I can accomplish that?
View 1 Replies View RelatedI have recently installed 11.04 natty on Intel Core i3-2100 3.1 GHZ using its own graphic accelerator. When the screen is idle for a long time, more than 1 hour, I get a black screen with the mouse arrow but nothing else. the mouse moves the cursor and Ctl+Alt+F1 does work. How to fix this problem?
View 4 Replies View Related