I try to boot the live CD and try xubuntu without installing, and my computer just hangs at a black screen, cuts off, then goes black and repeats. I also tried just installing with nomodeset enabled and it seemed to install fine, but it did the same thing as it does with the live cd, GRUB wouldn't even load... the computers specs [URL]
View 3 RepliesI'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
I get past the count down. The bars run across the top. Then my lcd monitor announces it has no signal and goes to sleep. Had this problem with earlier versions of Ubuntu, particularly 8.04. Was fixed in 8.10.
get Fedora 11 up and running?
I installed Xubuntu (Karmic 9.10) several times on an old iMac G3 with powerpc processor. Previously I had installed versions as 6.06 and 6.10 succesfully. But no luck this time. All installs were succesfull if alternate cd's were used.
The problem is that when i boot up i see the bootloader 'yaboot' and after that shortly the mouse logo from Xubuntu. After that the screen turns black and the indication light from the powerbutton turns from green to orange, this means no signal (i guess).
I assume that my screen resolution is wrong and cannot be displayed, the Mac uses 1024x768 if i am right.
My question is : How to access any configuration file to change resolution as I believe is the problem?
Edit: Perhaps there is a way to access command line to change config files.. ? Or using a live CD, but this computer is low on memory and has a hard time using live-CD's.
When i boot the fedora image from a dvd i'm not being taken to the fedora live system screen, instead i see a bunch a words on a black screen (looks like DOS)...am i having compatibility issues or what? ive tried 32bit, 64bit versions as well as different desktops. does anyone have any ideas? my laptop is brand new: toshiba e205 running windows 7 ultimate..
View 2 Replies View RelatedI have a 8.2 MBP with a 1680x1050 screen and a 6490M graphics card. I'm trying to boot from a usb stick ubuntu live. I'm able to get to the ubuntu menu, asking to install or start live boot, but when I select live boot I get a black screen( backlight is still on but entire screen is black). I've waited at that screen for quite some time with no luck.
View 2 Replies View RelatedThe harddrive of an old laptop of mine recently died. Until I can replace it, I would like to use the xubuntu live-cd. However I would also like to be able to install some additional packages and change some settings, so it would be great if I could make it persistent. I know that it's possible to install to an usb-pendrive, but the problem is that the laptop isn't able to boot from usb-devices.
Is it possible to install xubuntu to usb, but boot the system wiith the live-cd? Or is there another way to use an usb-pendrive to keep some settings/packages?
I'm trying to install Ubuntu on an iMac G4, and I had a promising situation the first time through but I botched the install due to my newbishness and haven't been able to boot from the install CD since.
Here's the situation:
Hardware
800 Mhz G4
256 MB RAM
15" LCD display
32 MB GeForce2 MX Video Card
"Standard" Airport Wireless Card
(more details here)
What Happened: After poking around on the forums some and reading through some of the wiki pages, I decided that 8.04 would be a good place to start, so I downloaded and burned an install disc. My first attempt booted almost perfectly, but I confused the "booting from the CD" with "installed Ubuntu" (Iknow, I know...), and promptly rebooted back into OS X.
Since then, I've been unable to successfully boot from the CD. Using the 8.04 disc, I'm prompted for what style of install I'd like, and I feebly type "live," the ramdisk loads, and then the screen goes blank, reads "loading" in the upper left for a second, the optical drive whirs for a bit, and then everything hangs on a black screen with a white cursor in the upper left. I thought I might just be impatient, so I let it sit overnight, but there was no change in the situation.
I know this isn't much information to work with. Is there a way to enable a more robust boot description? Something that will let me know what's going on when the screen goes blank and the optical drive whirs?
I've been installing Linux Mint with OSX on a bunch of iMacs, and its been working perfectly excpet for one of the iMacs. The screen will just go black when I boot from a live CD, but I can hear the login sound play. It's strange because all of the other iMac's run the live CD just fine. What could the problem be? I don't know what I can do to troubleshoot this problem.
View 3 Replies View RelatedI'm trying to install Ubuntu 10.10 from a Live CD. I can get to the Menu where I get to choose "Try without installing","Install Ubuntu","Test Disk," etc.After hitting ANY of the options, it hangs on a black screen, sometimes with a cursor blinking in the upper left, sometimes not. From all the research I've been able to dig up it seems it's a graphics card issue, but I haven't been able to find anything exactly like my problem as most everything I've been able to find say's theirs continues to install but then causes problems later, or they're trying to load on a dual boot system. I can't seem to get past that first "Install Ubuntu" selection. As soon as I hit enter it goes black.
I'm wondering if I can't load the nvidia drivers from a command line before I attempt to install from the live CD, but I don't know how to do that. I have the .run file downloaded but don't know where to go from there.
I own an HP Envy 14 [url]. Letting Ubuntu (or any Linux) attempt to boot into a Live CD without changing any parameters results in a black screen, but with everything else working (for Ubuntu, that means the login sound is played). I've discovered that putting nomodeset in the kernel line will allow me to get so far as a command line, but I can't startx from here (I get "Screen(s) found, but none have a usable configuration."). I think my issues have something to do with the dual/switchable graphics in my laptop.
View 7 Replies View RelatedI have an problem with login in to a fresh installed Ubuntu with the nvidia drivers (graphics card nvidia 210). So far I have installed Ubuntu 10.04, Ubuntu 10.10 and Unbuntu 11.04, they all seem to have the same problem. when I log in the screen goes black and the pc's hangs. I can switch to a terminal before I login and everything seems operational. I can login to Ubuntu with a fail save x session.
View 8 Replies View RelatedI want to make a clean install of 10.04 instead of just upgrading from Karmic.However when I run the boot cd I get the new Ubuntu boot up screen (with the five dots) but after a while I get a black screen and at the same time the cd stops running in the drive.The only thing I can do is pressing down the start button until my computer shuts down.I do get the menu to choose to run the live cd or make a new installation, but whatever I choose, I end up with the black screen.
I'm trying to install on an older IBM Thinkpad R50e, with 500 mb RAM so I figured that it was simply just too old to run the new ubuntu. The strange thing however is that the cd is actually running fine from within my Virtual Machine. This I don't get
don't have the knowledge to know what to do next.I'm trying to run the live disc of 11.04 as I want to dual boot with it. I've checked the MD5 and checked the disc for faults and they're ok but I just end up with a black screen. The graphics card is ATI 4550.
View 2 Replies View RelatedI can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedMy ubuntu desktop died yesterday. I rebooted my computer in like 1 month and after grub, the screen is all black and it stays there... forever. So I decided to see if the problem persists or not when I completely upgrade my ubuntu to the latest version. So I downloaded the latest ubuntu iso from the site, burned it, and booted from CD and I see several selections to choose from the menu list. The second one was "Install Ubuntu". What I'm worried about is I don't know whether selecting 'Install Ubuntu' will erase all my previous data, or there will be an option to upgrade Ubuntu without erasing all the data. Is it safe to install from the live disk? Will my data be safe? Is there any way to upgrade my Ubuntu on the HD to the latest Ubuntu from a live disk?
View 3 Replies View RelatedIm trying to install fedora 11 from the live CD and when i get into the CD meny where it says "boot" and "press tab for boot options" i press enter. then a bunch lines flash across the screen with a lot of error messages. then the fedora loading bar at the bottom loads. hangs for about 1 minute at the very end. then the GMD screen appears. But the GMD screen is all out of place and its patchy as if my graphics card was causing some kind of error
View 1 Replies View RelatedI currently dual-boot Windows Vista and Suse 11.2 on my Gateway desktop machine. I'd like to try out Fedora in a triple-boot situation.
My trouble is that the F13 Live CD hangs during boot. I've checked the hashes of the downloaded ISO files, and done burns on multiple media. During booting with the Live CD, my box hangs and I have to use the physical power button to turn off the box.
I've tried the 64-bit KDE spin (my preferred choice), the 64-bit GNOME version, and also the 32-bit KDE spin, and all of them hang at the same point. Removing the "quiet" boot option shows that it hangs after setting up my built-in card reader. When I installed Suse 10.3 on this same machine, I had to use the flags "acpi=off" and "brokenmodules=pata_it821x". Would the syntax be the same if I wanted to try with those boot options with the F13 Live CD?
Using the ISO files in VirtualBox inside my working Suse install works just fine.
I'm running an Acer 1810Tz, dual boot with win7.Under 9.10 and Grub I had no boot issues, however I have just completed the upgrade to 10.04 and upgraded GRUB to GRUB2.Everything boots just fine into Ubuntu, and my GRUB menu looks right, but when I select the Windows 7 option, the machine just hangs with a black screen, white cursor top left. I'm sure this is a trivial problem, something overwritten that shouldn't have been perhaps, but I have no clue where to start.
View 6 Replies View Relatedive just installed Xubuntu Desktop on to my computer, it runs fine, everything loads and so on. but after i log on the bottom 3rd of my screen is completely black
View 1 Replies View RelatedI was using Ubuntu 9.10, until I got a new graphics card (Nvidia GeForce 9800 GT). After I got that upgrade, Ubuntu no longer supported that card for some reason, so I decided to try Linux Mint since it was a close relative to Ubuntu. Still no support for the video card.
I've always wanted to try Fedora so I decided to grab the x86_64 live cd and burn it. I stick it into my disk drive and it boots where it shows me the options to "Boot" "Verify and Boot" "Boot from Hard Disk" and one other option.
I tried the Boot option, and after selecting that, everything stalls, and my display turns off (not the entire monitor, just the display). I tried Verify and Boot, and still no luck.
I have also tried the i686 live cd and the same issue. It can not be the way I am burning it, cause I've gotten other live cd's to work with the same method of burning. Is it that Fedora does not support the card?
I am trying to get the GNOME version up and running.
My live cd worked flawlessly.
After I installed it, is another story I chose to include the suggested .mp3 codec, and to install updates at the same time.
Cmos and hardware all inits fine, then I get several seconds of a cursor, followed by the nice "ubuntu" title with little orange squares under it.
Interestingly, the squares do not cycle until I hold down the power button.
Searching for "10.10 boot" somehow returned zero results. ??
I have the same problem with an Ubuntu 10.04 live CD. Whenever I attempt to boot (Lu|U)buntu from a live CD/USB, on most computers. it works just fine. However, on two computers, the live media starts off just fine with the main menu (Try Ubuntu without installing, etc.), then, when I select any option except 'Boot from First Hard Disk', after a few seconds, the CD stops spinning or the USB loses power. I'm convinced it's not a problem from the media, since it works perfectly fine on some computers.
Sysinfo:
Code:
Host Name: OWNER-PC
OS Name: Microsoftr Windows VistaT Home Premium
OS Version: 6.0.6001 Service Pack 1 Build 6001
OS Manufacturer: Microsoft Corporation
[code]...
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies View RelatedLast weekend, I upgraded my old PC and installed Ubuntu 9.10 on a brand new pc. It worked perfectly for 5 days. When I got home tonight, it wouldn't boot and got stuck on a black screen.
[Code]...
I really am a newby here but I think that the blkid command gives me my uuid. The uuid in the /dev/disk/by-uuid directory is in blue so I'm guessing that this is a symbolic link. And then, when I try to create a symbolic link with the ln command, it already exists... But the issue is that the UUID that is referenced in the error displayed is not the same as the UUID in my /dev/disk/by-uuid directory.
I have an alienware m17 with an Ati graphics card. I was able to log on and install all current updates as well as the card driver update where I was then prompted to restart. Upon doing so, I get the grub loading plus splash screen. My screen then goes blank followed by a noise in my laptop. I have tried nomodeset as well as taking out splash nothing has worked. Also, upon booting up I get lucky if I can get into Recovery mode.
View 2 Replies View RelatedI have an Acer Aspire One that runs Windows XP. I downloaded both the full Ubuntu (latest version but can't remember the number) and the Ubuntu for netbooks- each on a separate flash drive. I thought I had the netbook version in my Acer when I booted it up, but I saw it was booting the full Ubuntu version. Instead of allowing it to finish installing to run from the flash drive, I stupidly shut it down and removed the flash drive. Ever since then, when I try to boot my Acer, all I get is the black screen of death. I've tried the flashit.exe to flash the BIOS, but no luck. So, I'm guessing it's not a BIOS issue.
View 1 Replies View RelatedI wouldnt be posting here because I like to solve my problems by myself but I just dont know what else to do. I want to go back to the ubuntu world and I tried Kubuntu. After Installing the Fglrx drivers after a fresh install (10.10 32 bits) through the restricted drivers it shows an ugly font ubuntu loading screen and after that the screen turns "off" (like if there was no signal, the "on/off" light flickers) and it stays like that, but I can use the Ctrl+alt+f1 console. Installing the drivers from ati webiste ends in the same result as before. Downloaded Ubunt 10.10 32 bit and installed it, same results. I have a Radeon HD 3300 integrated. I dont know what to do. The open source drivers works well, but there is no 1280x1024 resolution in the screen manage
View 2 Replies View Related