Ubuntu :: Xsession-errors: Multiple Calls To Startxfce4 And Xfce4-panel?
Jun 8, 2010
I get the following messages while starting up. This also delays my desktop initialisation.
Code:
/etc/gdm/Xsession: Beginning session setup...
Setting IM through im-switch for locale=en_GB.
Start IM through /etc/X11/xinit/xinput.d/all_ALL linked to /etc/X11/xinit/xinput.d/default.
/usr/bin/startxfce4: X server already running on display :0
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
[Code]...
If I run in terminal tail -f .xsession-errors while my system initialises, I see these messages appearing every 5 sec.
View 2 Replies
ADVERTISEMENT
Apr 13, 2010
I delete the file and within about a week i am back to a "out of space error" I have tried root owning the file with no permission to write, but it still gets written, just with a number on the end
the system appears to be working fine otherwise. I could set a cron remove but that seems a bit more hacky than telling it to shut up.
View 4 Replies
View Related
Feb 18, 2011
Just today I started getting notices about lack of disk space on my system. After much digging I found that .xsession-errors and .xsession-errors.old were taking nearly 70GB of space combined. The primary message I'm getting over and over again is: SSL_Write: I/O Error I have been unable to figure out what's causing this error.
View 3 Replies
View Related
May 5, 2010
I have had a few X crashes and started to suspect compiz as they usually happened when I was resizing a window or the window was wobbling.
Here is the Xsession-errors log (it's a hidden file in your home folder). It mentions:
Code:
WARNING: Application calling GLX 1.3 function "glXCreatePixmap" when GLX 1.3 is not supported! This is an application bug!
Starting gtk-window-decorator
Unable to find a synaptics device.
[Code].....
View 3 Replies
View Related
Jan 23, 2011
Every time I boot 10.04 on my laptop, the file ~/.xsession-errors is created.
I post here the content of my ~/.xsession-errors and the output of dmesg:
NB: I'm running 10.04 on a Dell laptop m101z.
~/.xsession-errors:
View 2 Replies
View Related
Jan 8, 2010
with slackware 13.0 for one user xfce4 hangs and doesn't start..xsession.errors claim it can't open display. It works fine for other users. Also if I access the machine in question as the same user but remotely using remote X (X-terminal on my LAN) it works fine.Sometimes if I wait and count to 30 it comes up but a lot of the features don't work.During the last week have posted this question on the compuserve linux forum and also in the xfce site forum with no solutions.seems there must be something in that user's directory which is hanging it up. I keep the same /home/users directory on a separate partition so when I upgrade for new versions of slackware the /home/users remain the same - I symlink home to that partition so upgrades are somewhat seemless.
View 3 Replies
View Related
Aug 4, 2011
Does anyone know, where are panel preferences saved? I have several users, and I don't want to edit preferences for each one.
View 1 Replies
View Related
Dec 31, 2010
I'm thinking of using a GIT repo to get version 4.7 of xfce4-panel, but I need to know if I need to backup any config files before removing version 4.6 through apt. I have several panel buttons that I don't want input again (could easily take 30+ minutes of clicking).
I do realize that 4.7 will become stable on Jan 16, but that doesn't mean it will be available through apt. If someone knows for sure whether it will be, or how I can find out,
View 3 Replies
View Related
May 18, 2011
I was wondering if anyone knew a way to enable 'intellihide' behavior for the xfce4 panel. That is, is it possible to autohide the panel only when a window is covering it, as is possible with most docks?
View 1 Replies
View Related
Jul 16, 2011
Upgraded from 13.1. Certain panel plugins seem to be gone in XFCE4.
When I try to add the Icon Box, Task List or several others to the panel, I get "Could not open 'iconbox' module".
There is an iconbox module in /usr/lib/xfce4/panel-plugins, along with some others, but they all date back to 3/29. In /usr/share/xfce4/panel-plugins, there is a mix of newer and older files.
Did the icon box go away? Do I need to nuke ~/.config/xfce4?
View 14 Replies
View Related
Nov 14, 2015
Upgraded my system and again gnome got messed up. Mate doesn't run on Debian 8 so decided to try XFCE4.
How can move the panel to the bottom of the screen ?
I go to applications -> settings -> panel
I can choose between vertical / horizontal / deskbar.
View 3 Replies
View Related
Sep 29, 2010
Original tittle, edited for add the tag [SOLVED] on subject How can I save the configuration of panel of the xfce4 ?
I have a pretty panel configured on my xfce4 (debian lenny). How can I save the configuration of my panel ? I'm afraid to lost my configuration in some situation of error.
View 2 Replies
View Related
Feb 15, 2011
Is it possible to show the output of a command in xfce4-panel? Like you would do with Conky.The Xfce battery monitor consistently uses a bit of my CPU so I wish to run "acpi" (and work out a clever way to just show the percentage) every 5 or 10 minutes in the panel.
View 5 Replies
View Related
May 15, 2011
I posted this same issue in the Xfce support forums this morning. So far, no replies. This morning, using Synaptic, I finally upgraded my main Wheezy Xfce 4.6 computer to Xfce 4.8. There were 225 upgrades, plus 33 new things to be installed. It has been about 2 weeks since I last fully upgraded that system, so I'm sure that not all of today's upgrades were directly related to Xfce 4.8.
I waited to upgrade as long as I did because Wheezy's been getting a steady stream of Xfce 4.8 upgrades for the past several days -- I wanted to wait until that stream stopped, to reduce the chances that I would run into an upgrade problem that was on the verge of being fixed.
The only issue I had was that, in the middle of the configuration step (for lib6, I think), it asked me to either stop or restart xscreensaver before continuing (so that I wouldn't get locked out of the current session), so I completely stopped xscreensaver.
View 5 Replies
View Related
Apr 12, 2011
I have a problem in making multiple calls using PJSIP. I registered different accounts that implements IAccount and added that in the CallManager. When i try to make the calls from the same CallManager, I could able to make the first call. When second call is made the first call got cut and it is alerting and the same for the thrid call..Could anyone help me in this regard.
Note: Calls has to be made from different numbers to different destinations. Is it possible to make multiple outbound calls simultaneously from the same instance of CallManager?
View 1 Replies
View Related
Oct 26, 2010
What is the real difference between system calls and normal function calls. Ultimately function calls too would be passed to kernel for some or the other work.
View 7 Replies
View Related
Jul 4, 2011
I installed the xfce4-quicklauncher plugin from a tar file in Slackware 13.37. It is showing as installed in gslapt, but it is not showing in the xfce panel's "Add New Items" menu. (see attached images) I tried rebooting and a few google searches. What must I do to get the xfce4-quicklauncher plug-in to appear in the xfce panel's "add New Items" menu?
View 1 Replies
View Related
Mar 10, 2011
I have installed Slackware and chose Xfce as my primer desktop. but when I run startx or startxfce4 xfce freeze during startup what to do?
View 14 Replies
View Related
Oct 22, 2010
Whenever I open up any program or just start my computer, multiple bad image errors pop up and I am forced to close all of them by pushing "ok." Everything is fully functional that I know of, but I would like to fix them. I have tried checking the system but it doesn't work. I have AVG Antivirus and Registry Defense installed. It has supposedly fixed things but the error messages still pop up.Would a malware remover work?
If so what would be a good one?
View 1 Replies
View Related
Mar 15, 2010
I need to write a script. In which, the 2nd part commands need to run under another bash shell environment.The enter_antoher_bash_env.sh will setup a new shell environment, call "bash". The rest commands need to run under the new env. (I cannot change this script too. )If I run these command one by one manually, it works of course. If I put them into a script, enter_another_bash_env.sh won't return because it calls "bash" command inside.
View 10 Replies
View Related
Jan 30, 2009
I have just loaded the FC9 onto a HP/Compaq D510 2.8Ghz/Intel graphic card. Everything when as expected during the install but on login I get the following set of errors. The follow Panels encounters a problem.
[Code].....
View 3 Replies
View Related
Mar 1, 2011
As part of an assignment, our class was given a small set of c++ classes which are compiled using a makefile. As part of the assignment, I have created a namespace and saved in it a .cpp file. The functions, constants and typedefs from the namespace are now used in one of the original files, and so I added an <#include MyFile.cpp> to the file I modified, in addition to a using MyNamespace;
When I try to use the original makefile, the compiler gives a lot of errors about multiple definitions of every function in the namespace. What do I need to do to resolve this? Do I need to change the makefile or one of the files themselves? I am new to Linux programming and makesfiles.
View 2 Replies
View Related
Nov 24, 2010
This is the makefile....
Code:
animesh:main.o input.o bsort.o output.o
gcc -o animesh main.o input.o bsort.o output.o
[code]....
View 7 Replies
View Related
Mar 3, 2016
Recently I upgraded my machine from wheezy to jessie.
Everything went smooth until the point that I restarted the node.
During startup I'm getting the following message which is flooding the screen:
Code: Select allsystemd-journald[296]: Failed to forward syslog message: Connection refused
After waiting a long time (the message above still continues to flood the screen), I'm being prompted with the following:
Code: Select allGive root password for maintenance (or type Control-D to continue):
If I press Ctrl+D the boot process continues and finally boots normally.
What I can do to avoid pressing Ctrl+D during the boot process?
I'm assuming that it must be a startup service which is failing but I'm unable to trace which exactly is that.
I'm attaching the full log [URL] ....
View 8 Replies
View Related
May 27, 2011
First of all, ntfs-config does not appear in the menu in openSUSE 11.4 Gnome 2.32. When I try to start it using the run command(Alt + F2) it gives the following error in a small window: Insufficient Rights. You need administrative rights to start this application. I then try to run it as root (su -l or su) and it gives the following error:
[code]...
All these packages and others are already installed in my computer.
View 9 Replies
View Related
Oct 22, 2010
I first tried latest version 10.10 desktop. very slow booting in a Centrino CPU laptop not booting at all in a N455 CPU netbook. Tried version 10.04 which seems to work better fast booting in Centrino CPU laptop. fast booting in N455 CPU netbook. From Centrino Laptop with Windows XP on HD, once loaded Ubuntu as persistent live program from a USB drive, tried to install the program on SD memory card in PC slot. Upon request, installation made onto that memory only, not on inside HD, hence formatting only that memory. Upon completion, after removing the external memories and booting again the PC it does not boot of its own any more. XP OS damaged. I have recovered the system with a Toshiba backup CD but the HD has been formatted and all data lost. How can this happen ? I'll never try anymore to permanently install Ubuntu. I'll use it as persistent live on an external memory. I only have an old PC laptop with 128 MB RAM for further installation testing but no Ubuntu release can boot there. By the way, Lubuntu 10.10 look more fast and safe although appears to have more limitations then Ubuntu 10.10.
View 3 Replies
View Related
Jan 21, 2011
According to Distrowatch, the two most downloaded distributions are Mint and Ubuntu. I have put both on my computer. In Mint I can find no way to put multiple virtual desktops in my panel. In Ubuntu 10.10, when I go to synaptic package manager the settings tab with the repositories is dimmed out. I have enabled the sources list in administration but it is a less convenient way to add repositories. Despite what the linux community seems to think, I find that Simply Mepis and Pclinuxos are better for actual use.
View 4 Replies
View Related
Jun 9, 2010
I recently upgraded to 10.04, but I'll be darned if I can get GDM to run my personal .Xsession (or .xsession or .xinitrc or.Xclients...) when I log in. I don't see any option on the session menu. The only entries are window managers and "xterm". My script works when I log in from the console. don't tell me that Ubuntu (or GDM) has made things simpler by taking away the option of a .Xsession! Nah, couldn't be.
View 5 Replies
View Related
Jul 19, 2010
My problem is, when I start my custom xsession through startx I get almost ideal results; the network manager requires a password every time. But when it is run through gdm I cannot use any of the awesome3 hotkeys (and so alas, cannot actually do _anything_) although the wireless does connect automatically (?).
[Code]...
View 2 Replies
View Related
Aug 4, 2009
Normally you can put your xrandr command in /etc/kde4/kdm/Xsetup to change resolution before login. This does not work for openSUSE. Why, where else ?
View 1 Replies
View Related
