I delete the file and within about a week i am back to a "out of space error" I have tried root owning the file with no permission to write, but it still gets written, just with a number on the end
the system appears to be working fine otherwise. I could set a cron remove but that seems a bit more hacky than telling it to shut up.
Just today I started getting notices about lack of disk space on my system. After much digging I found that .xsession-errors and .xsession-errors.old were taking nearly 70GB of space combined. The primary message I'm getting over and over again is: SSL_Write: I/O Error I have been unable to figure out what's causing this error.
View 3 Replies View RelatedI have had a few X crashes and started to suspect compiz as they usually happened when I was resizing a window or the window was wobbling.
Here is the Xsession-errors log (it's a hidden file in your home folder). It mentions:
Code:
WARNING: Application calling GLX 1.3 function "glXCreatePixmap" when GLX 1.3 is not supported! This is an application bug!
Starting gtk-window-decorator
Unable to find a synaptics device.
[Code].....
my mouse is not being seen so I need to log in without the xsession autostarting to get a cmd line login.
my account will not let me login with my passd so the console is my only access with root but i cannot do anything withourt a mouse.
1. How can i get logged in?
2. How can I stop xsession from autostarting on a reboot once i get loged in i can try to remove that setting and boot the box.
3. secure session lets me in but the xterm is not active so I cannot type any commands.
I get the following messages while starting up. This also delays my desktop initialisation.
Code:
/etc/gdm/Xsession: Beginning session setup...
Setting IM through im-switch for locale=en_GB.
Start IM through /etc/X11/xinit/xinput.d/all_ALL linked to /etc/X11/xinit/xinput.d/default.
/usr/bin/startxfce4: X server already running on display :0
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
[Code]...
If I run in terminal tail -f .xsession-errors while my system initialises, I see these messages appearing every 5 sec.
Every time I boot 10.04 on my laptop, the file ~/.xsession-errors is created.
I post here the content of my ~/.xsession-errors and the output of dmesg:
NB: I'm running 10.04 on a Dell laptop m101z.
~/.xsession-errors:
with slackware 13.0 for one user xfce4 hangs and doesn't start..xsession.errors claim it can't open display. It works fine for other users. Also if I access the machine in question as the same user but remotely using remote X (X-terminal on my LAN) it works fine.Sometimes if I wait and count to 30 it comes up but a lot of the features don't work.During the last week have posted this question on the compuserve linux forum and also in the xfce site forum with no solutions.seems there must be something in that user's directory which is hanging it up. I keep the same /home/users directory on a separate partition so when I upgrade for new versions of slackware the /home/users remain the same - I symlink home to that partition so upgrades are somewhat seemless.
View 3 Replies View RelatedQUESTION: Where do I add "pppd nomagic" to stop analog modem loopback errors? (I am using Gnome PPP.)BACKGROUND INFO:I am using Ubuntu LTS 8.04 on a laptop and have an analog modem connected via USB serial cable. The 8.04 dialup and the analog modem work flawlessly.Modem disconnects when using Ubuntu LTS 10.04.1 Live USB:I am testing LTS 10.04.1 on a live USB drive that I purchased preinstalled from On-Disk.On the live USB drive, I am able to get a dialup connection with my ISP long enough to pull up a web page with the browser. However, the analog modem disconnects within minutes with exit codes 16 or 17.an pppd:16 The link was terminated by the modem hanging up.The PPP negotiation failed because serial loopback was detected.
View 1 Replies View RelatedI just updated to the new drivers. In my Xorg.0.log file, it doesn't show any errors. It just stop at a black screen. This might be a new bug with the binary drivers.
View 6 Replies View RelatedToday morning I logged on to one of our servers (through ssh -X) to perform a routine maintenance. When I tried to open a GUI application, it failed to connect to the X server of the workstation. Eventually I ended up issuing the command
Code:
df -h /
and shockingly it showed that / is 100% used. I checked / using
Code:
du --max-depth=1 -xh /
to check the sizes of the individual directories, which showed that only about 18% of the / is used and that confused me badly. There was no quick solutions when I googled around; but luckily I found the following link which nicely explained the issue I had:
[URL]
All I did was found out the services responsible for those unreleased files (using lsof +L1) and restarted them. That is it. Now df reports only 18% of the disk is used and all my X things started working again, thanks to Walker.
I use the direct ip instead of the hostname and have recreated the printer several times and the issue doesn't go away. Test prints go through fine to the printer but when I actually try to print something this error comes up from CUPS.
View 5 Replies View RelatedI recently upgraded to 10.04, but I'll be darned if I can get GDM to run my personal .Xsession (or .xsession or .xinitrc or.Xclients...) when I log in. I don't see any option on the session menu. The only entries are window managers and "xterm". My script works when I log in from the console. don't tell me that Ubuntu (or GDM) has made things simpler by taking away the option of a .Xsession! Nah, couldn't be.
View 5 Replies View RelatedMy problem is, when I start my custom xsession through startx I get almost ideal results; the network manager requires a password every time. But when it is run through gdm I cannot use any of the awesome3 hotkeys (and so alas, cannot actually do _anything_) although the wireless does connect automatically (?).
[Code]...
Normally you can put your xrandr command in /etc/kde4/kdm/Xsetup to change resolution before login. This does not work for openSUSE. Why, where else ?
View 1 Replies View RelatedI'm trying to export a variable from within the .xsession so it will be available to any application started afterwards.
Here is a minimial .xsession file:
Code:
export MYVAR=123
exec gnome-session
The problem is that when I start a terminal and do:
Code:
echo $MYVAR
I get an empty string, meaning it's undefined.
Installed 10.10 Ubuntu and found the Dell D820 did not digest Gnome that easily. I tried adding Lubuntu from repos after adding PPA. Seemed unstable to use, so I followed Psychocat direction for Pure LXDE and removed Ubuntu. Now login is giving error "xsession:unable to launc "openbox-gnome" X Session --- "openbox-gnome" not found; falling back to defaultsession." Where do I correct the xsession login to allow auto login. (I know the chances for autologin, and still choose to use it)
View 7 Replies View RelatedIm trying to create a custom xsession on Ubuntu 10.04 that will launch nxclient and logout automatically when it closes.
This is what I have so far
Code:
How would I go about altering this script to logout when nxclient closes? To make this more complicated, nxclient spawns a separate process (nxssh) when it logs in and closes itself.
Is it possible for a script to listen for a child process to close and then execute some commands (in this case a logout)?
I'm trying to control my media center via my netbook
but when I ssh into the machine and do
Code ...
So I guess the ssh session is trying to start an x session. Obviously I don't want another session but instead use the existing x session that the machine runs anyway (and on which Rhythmbox runs)
googling I found a similar bug for f12 but no solution or fix or anything...
sorry if this is such a noob question. I've never dealt with xsessions in that way...
I've just install SUSE 11.3. GNOME and KDE are selected as GUI session.At the login screen, in Session list I saw TWM, and after selected it as login session I couldnt login, and login screen disappear as well. It shows a black screen and the mouse pointer, and I have no idea how to switch to KDE or GNOME since no login screen.
View 2 Replies View RelatedCannot login as root or any user.
Message "xsession login to root disable".
I noticed the xsession-error file in my main user's home folder grow up to a big size, it's usually at 2-3MB sometimes up to 20MB. I use Fedora 10 64bit and KDE4.2. I got no problems at all and the xsession-error logfile is full of weird entrys, almost everything is reporting to it, mplayer, xine, opera, firefox, dolphin and many other software I use. I don't think the most of these entrys are real and critical system errors, especially all the mplayer stuff. However, I'm not worried about the file size since Fedora 10 seems to delete the file on every log in.
My problem is the disc access because all this never ending writings to hard disc kinda break things like the mount options noatime, nodiratime. I read something about you can redirect the logfile to /dev/null but that was for an ubunto distribution and I would like to get a how to for a save way to disable the xsession-error logfile, I got 8GB RAM so everything is in cache anyway after a long session, I really want to get rid of unnessesary hard disc access like that. If not recommend to disable it, can I direct it to an usb stick or ssd?
I need to install in my centos 5.3 a remote sesion login like a Terminal Server on Windows. I tried to use a VNC but I have a problem and it is that the user must be loged before on local machine. I need to can wake on lan my server and log in with that program.
View 1 Replies View RelatedI want to put:
xmodmap -e "pointer =3 2 1"
somewhere in the startup. It seems creating an .xsession is the solution. But after I create a .xsession file in my home folder, the next time I run startx the screen just turns black. (And only for a short while can I switch to another virtual terminal, before that too becomes impossible). After deleting the file it runs OK again. I'm not using any login/desktop manager. I use IceWM on Debian Squeeze. Is there some script/import that has to be present in the .xsession file, or is something else going on? Also I'd like to know what I should do when I get a black screen. Turning off the PC is such a crude method
I have a Centos 5.5 and we make remote connections with Xfree from Windows to the Linux Server. We start the Xsession with the option -clipboard, but it's not working. Which settings do I have to change in the server configuration that the clipboard works in the Xsession?
View 2 Replies View RelatedI am new to Ubuntu, so I do not know how to report bugs if and when found. Could anyone tell me how to do so?
View 2 Replies View RelatedI',m executing ping, but it didn't work, in order to find the mistake in my network I would like to know how to see the errors:
Code:
18 packets transmitted, 0 received, +12 errors, 100% packet loss, time 17038ms, pipe 4 I want to see this +12 errors. Could I do that?
i am a new guy here..i unfortunately removed all my files from /home folderrm -rf ~ /. picasa / As some of the files were important i tried recovering data using foremost..i used the command foremost -i /dev/sda1 -o /mnt/foremostThen there started a process..it was downloading something..and i left the computer for an hour or so..when i return there was nothing on screen..so i reloaded the system..And after that when i try to login i get the error"xsession: warning: unable to write to /tmp; xsession may exit with an error"..so when i googled for it i found its because there is no memmory in my /root ..so i tried login via console (tried ctrl+alt+f1..after the login screen appears..when i type ctrl+alt+f1 i get a black screen)..but nothings happening...how can i login via console..can my datas be recovered.
View 6 Replies View RelatedIs this seriously the ONLY way to report a bug? I can't just fill out a form somewhere without running software to do it? When I try to do it the way explained in the guide, it tells me that I'm using a stable version of Xubuntu, and that only people running dev versions (like 11.10) can report bugs.This seems absurd. Are they saying that all stable releases are perfect in every way? Surely one must be able to report a bug for them...
View 4 Replies View RelatedI just did a fresh install of 10.10. I was running 10.04 but formatted that partition when installing from a USB key. Pre-install, I ran:
Code:
sudo dpkg --get-selections > package.selections Post-install, I moved some of my etc files back in. I updated my sources.list. Then I ran
Code:
sudo dpkg --set-selections < package.selections
sudo apt-get dselect-upgrade
However, lsb_release is reporting 10.04. When I boot the system it doesn't show the typical boot screen but rather "Ubuntu 10.10" and output of what's loading up. On my laptop (upon which 10.10 installed fine), the splash screen shows the dots loading up with the new Ubuntu splash (10.10 style).
I go into Update Manager, and it thinks I need to upgrade to 10.10. Thing is, I'm already on 10.10. My kernel version is 2.6.35.22 and I'm running Gnome 2.32.00 according to the System Monitor. I'm wondering if I'm getting 10.10 updates or 10.04 updates since my system incorrectly thinks I'm on 10.04.
230Gb HD, I recently partitioned a 90Gb slice, and ran 10.10 on it for a while, but due to not using it, I fired up gparted off a live disc last night and got rid of the partition. I got Gparted to make a 5gb swap, and the rest for 10.04, all is fine, rebooted to 10.04, updated grub, it removed the entry for 10.10, but reports that my hd is only 140gb, and sda2 is a 5gb swap. What gives? Where's my disc space?
View 2 Replies View Related