Ubuntu Installation :: Need To Backup Xfce4-panel Config?
Dec 31, 2010
I'm thinking of using a GIT repo to get version 4.7 of xfce4-panel, but I need to know if I need to backup any config files before removing version 4.6 through apt. I have several panel buttons that I don't want input again (could easily take 30+ minutes of clicking).
I do realize that 4.7 will become stable on Jan 16, but that doesn't mean it will be available through apt. If someone knows for sure whether it will be, or how I can find out,
View 3 Replies
ADVERTISEMENT
May 15, 2011
I posted this same issue in the Xfce support forums this morning. So far, no replies. This morning, using Synaptic, I finally upgraded my main Wheezy Xfce 4.6 computer to Xfce 4.8. There were 225 upgrades, plus 33 new things to be installed. It has been about 2 weeks since I last fully upgraded that system, so I'm sure that not all of today's upgrades were directly related to Xfce 4.8.
I waited to upgrade as long as I did because Wheezy's been getting a steady stream of Xfce 4.8 upgrades for the past several days -- I wanted to wait until that stream stopped, to reduce the chances that I would run into an upgrade problem that was on the verge of being fixed.
The only issue I had was that, in the middle of the configuration step (for lib6, I think), it asked me to either stop or restart xscreensaver before continuing (so that I wouldn't get locked out of the current session), so I completely stopped xscreensaver.
View 5 Replies
View Related
Aug 4, 2011
Does anyone know, where are panel preferences saved? I have several users, and I don't want to edit preferences for each one.
View 1 Replies
View Related
May 18, 2011
I was wondering if anyone knew a way to enable 'intellihide' behavior for the xfce4 panel. That is, is it possible to autohide the panel only when a window is covering it, as is possible with most docks?
View 1 Replies
View Related
Jul 16, 2011
Upgraded from 13.1. Certain panel plugins seem to be gone in XFCE4.
When I try to add the Icon Box, Task List or several others to the panel, I get "Could not open 'iconbox' module".
There is an iconbox module in /usr/lib/xfce4/panel-plugins, along with some others, but they all date back to 3/29. In /usr/share/xfce4/panel-plugins, there is a mix of newer and older files.
Did the icon box go away? Do I need to nuke ~/.config/xfce4?
View 14 Replies
View Related
Nov 14, 2015
Upgraded my system and again gnome got messed up. Mate doesn't run on Debian 8 so decided to try XFCE4.
How can move the panel to the bottom of the screen ?
I go to applications -> settings -> panel
I can choose between vertical / horizontal / deskbar.
View 3 Replies
View Related
Sep 29, 2010
Original tittle, edited for add the tag [SOLVED] on subject How can I save the configuration of panel of the xfce4 ?
I have a pretty panel configured on my xfce4 (debian lenny). How can I save the configuration of my panel ? I'm afraid to lost my configuration in some situation of error.
View 2 Replies
View Related
Feb 15, 2011
Is it possible to show the output of a command in xfce4-panel? Like you would do with Conky.The Xfce battery monitor consistently uses a bit of my CPU so I wish to run "acpi" (and work out a clever way to just show the percentage) every 5 or 10 minutes in the panel.
View 5 Replies
View Related
Jun 8, 2010
I get the following messages while starting up. This also delays my desktop initialisation.
Code:
/etc/gdm/Xsession: Beginning session setup...
Setting IM through im-switch for locale=en_GB.
Start IM through /etc/X11/xinit/xinput.d/all_ALL linked to /etc/X11/xinit/xinput.d/default.
/usr/bin/startxfce4: X server already running on display :0
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
[Code]...
If I run in terminal tail -f .xsession-errors while my system initialises, I see these messages appearing every 5 sec.
View 2 Replies
View Related
Jul 4, 2011
I installed the xfce4-quicklauncher plugin from a tar file in Slackware 13.37. It is showing as installed in gslapt, but it is not showing in the xfce panel's "Add New Items" menu. (see attached images) I tried rebooting and a few google searches. What must I do to get the xfce4-quicklauncher plug-in to appear in the xfce panel's "add New Items" menu?
View 1 Replies
View Related
Mar 31, 2011
I have a maverick box plugged into two monitors, using the open source radeon driver and randr. Each monitor has a top and bottom gnome panel, with various widgets in each. There is no /etc/xorg.conf. The Problem: If I 1) remove both monitors to plug the box into my HDTV, or 2) connect to the X server remotely from a laptop, the panels all get shoved onto the one display. Do you have any advice on how I might specify different gnome panel 'profiles' for the different uses of this computer?
View 2 Replies
View Related
Jul 3, 2011
Is there a way to backup the panel icons?
View 2 Replies
View Related
Sep 1, 2011
I recently lost the default panel from the top task bar, a message appeared on boot up saying a config file was missing or couldn't load - or something to that effect. I didn't realise to what it was referring until the computer (an Acer One) completed its start up and I could see the desktop
How can I restore the panel? (graphic from my other Ubuntu laptop attached showing the default panel appearance)
View 5 Replies
View Related
Mar 8, 2010
CHECK OUT THIS THREAD INSTEAD: http://ubuntuforums.org/showthread.p...93#post8937093 I got a problem with my xorg.conf file. I'm just not able to add display resolutions. I'm running Ubuntu 9.10 x86 with Xfce4 desktop enivorment. I got an old Nvidia 6600 GT. I'm on a 21" IBM CRT, and i know that it's good for 2048x1536 @ 75hz.
I know that it can handle 30-130 khz Horizontal and 40-170 hz Vertical.
I also know that i would like to be able to use 1600x1200 @ 85hz.
Right now I'm just not able to go past 1024x768 @ 50hz. I've installed the restricted nvidia driver from the popup restricted driver menu, also tried to downgrade to an earlier driver, did'nt work, then i upgraded again to the newest driver that was easily available through Envyng-gtk. Still no more resolution choiches.
sudo dpkg-reconfigure xserver-xorg just don't work. Nothing happens when i write it in the terminal.
Now i'm starting to get frustrated
[Code]...
View 3 Replies
View Related
Apr 2, 2011
No Top Panel or Unity Panel after 11.04 Upgrade from 10.10 and it does not seem to be a common problem.
View 3 Replies
View Related
Jan 17, 2010
When I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies
View Related
Jul 10, 2011
I'm running Ubuntu Server 11.04 with OpenSSH, trying to create an ssh tunnel (for web traffic) to it from my (also Ubuntu) laptop. This is the command I'm using to create the tunnel:
Code: ssh -ND localhost:8080 george@192.168.1.20 I had it all working on a virtual machine.. which was deleted What settings/lines do I need to change/add from the default OpenSSH config files to get tunnelling to work? I've Googled and AllowTcpForwarding is set to yes, as is X11Forwarding.. but it still doesn't work. Chrome can connect to the server, but says the connection was closed before any data was sent.
View 3 Replies
View Related
Sep 7, 2009
I was tryin to deploy svn on centos 5 with respect to [URL] I am stuck understandin the location svnpath parameter on svn config
[Code]...
View 1 Replies
View Related
Apr 9, 2011
I am running a server with a GRSecurity patched Kernel 2.6.32.36. I've tried to optimize the kernel as much as I can and know it (removing options, not needed drivers and so on) and compiled the modules into the kernel (no loadable modules anymore). I've started with Slackware 13.0 and the default config for 2.6.29.6-huge. Still I am not sure what to remove/optimize further now.
My question: Is there a way to boot with a kernel with loadable modules, check which modules are really needed for this hardware, (do something like lsmod) and save the running configuration modules for a next kernel compile to be the default .config instead of writing them down by hand and search for the appropriate names in .config or during menuconfig? (Note: zcat /proc/config.gz > .config is NOT the way I want, as it gives me just the current kernel config)
View 5 Replies
View Related
May 18, 2010
using Back In Time to backup my home directory to a second hdd that is mounted at /media/backupThe trouble is, I can do this using Back In Time (Root), but not using Back In Time without the root option. This is definitely a permissions issue - it can't write to the folder, but when I checked by right clicking on the backup directory and looking at the permission tab, it said I was the owner
View 2 Replies
View Related
May 10, 2011
I install and tested Restore EE Backup server on a test PC with basic configuration and its working fine.
[URL]
The issue i have is where is the location these backup snapshots or files are saving? I want to add a separate Storage to save the backup?
View 1 Replies
View Related
May 7, 2011
I currently can run an old swf on my Chumby 8 device by storing and using these three files on a USB plugged into the device
config
<?xml version="1.0" encoding="utf-8" ?>
- <config>
[code]...
View 1 Replies
View Related
Jan 19, 2010
I have a scheduled backup to run on our server at work and since the 7/12/09 it has be making 592k files instead of 10Mb files, In mysql-admin (the GUI tool) I have a stored connection for the user 'backup', the user has select and lock rights on the databases being backed up. I have a backup profile called 'backup_regular' and in the third tab along its scheduled to backup at 2 in the morning every week day. If I look at one of the small backup files generated I see the following:
Code:
-- MySQL Administrator dump 1.4
--
-- ------------------------------------------------------
-- Server version`
[code]....
It seems that MySQL can open and write to the file fine, it just can't dump
View 3 Replies
View Related
Feb 2, 2011
I've tried to google but not much luck. What I would like to do is have anumber of folders on my desktop and their contents, replicated/duplicated into another folder on the same PC in real time. So for example, if I were to change an OpenOffice document in a specific folder on my Desktop it would be replicated/duplicated in real time. If I had three folders on my Desktop A, B and C they would also appear/be backed up (in real time) in a folder called /home/backup. Can this be done?
View 3 Replies
View Related
May 16, 2011
I Installed eclipse in my ubuntu 11.04 version via its soiftware center. but now i have to format my machine due to some disk space changing requirements. my problem is how to backup my eclipse installation in other destination.because it gets lot of time to install via my broadband internet package. what folders i moved for that purpose.?
View 1 Replies
View Related
Jun 30, 2010
does anyone know of a good backup software for Ubuntu 10.4 that will let me select which folders to backup, rather than a complete backup? My install and settings etc can be replaced, but my photos and memories cannot!
View 6 Replies
View Related
Sep 1, 2011
I have installed Ubuntu 11.04 onto HP EliteBook 8540w notebook and would like to backup the entire disk using some popular backup tool.
I have searched in the internet and found the closest tool is PartImage. But the bad news is that it does not support ext4 fs!
View 5 Replies
View Related
Feb 11, 2010
I'm trying to install iw-0.9.19 on xubuntu.When i type the command "make", i get:
/bin/sh: pkg-config: not found
/bin/sh: pkg-config: not found
Makefile:38: *** Cannot find development files for any supported version of libnl. Stop.
[code]....
View 2 Replies
View Related
Oct 8, 2010
Trying to install Cinepaint from a tar.gz file. Running ./configure brings up the above error. Where do I get gtk-config from?
View 3 Replies
View Related
Jul 8, 2010
So, I had a system failure earlier today. I decide to reinstall xubuntu 9.10 on my computer. Everything goes fine and then when I start getting things set the way I want them, I find that for some odd reason, I can not change my wallpaper in xfce4. Added to that, when I click the right mouse button, nothing happens(yes I have it checked to open the application menu) and when I click in the left mouse button and drag(usually a frame appears), nothing happens.
View 1 Replies
View Related
