I decided I wanted to give ubuntu a go by installing it on a 4GB USB drive.
I installed it using this guide url.
I booted up and it hung on the 'mounting file system', I left it for ages and eventually it goes to a black screen and prints out an error message, I can't type anything on my keyboard.
3/4 of the way through the install the reboot black screen : The disk drive for / is not ready yet or not present continue to wait; or press S to skip mounting or M for manual recovery . neither works, was running Ubuntu 10.4.
View 1 Replies View RelatedI have the normal OS choices menu (Windows XP or Unbuntu) but when I choose ubuntu I get an instant flash of an error message on a black screen so quick I cannot read the whole thing but I caught "error" and "format" and then the computer reboots. I have no problem getting into Windows.
View 5 Replies View RelatedI can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedFew days after installing Ubunto 9.10, during installation of gstreamer, the installation utility got stuck, and with it the whole desktop icons. (I think the gstreamer has nothing to do with it). When I tried to execute some icon, like the terminal, it will not open. After restarting the computer, I get a tty1 login terminal and not the graphical one (tty7). When pressing Ctrl+Alt+F7, nothing happens. It switches to a black screen. "sudo startx", gives some error log. I already reinstalled the X-server, ubuntu desktop and other stuff.
What can be the problem? Is it related to my video card (nvidia 7600 GT)? I didn't install any nvidia specific driver. This happened to me earlier and I reinstalled Ubunto. I think maybe I should move to some other distribution.
I'm using ubuntu 10.04 and it worked fine but recently I'm getting the following message -
(process:343) GLib_Warning** : getpwuid_r(): failed due to unknown user id(0).
This message comes with a black screen and then no key stroke works and everything totally freezes. then I've to force restart using power switch. This message appears when I'm using internet. I'm using pppoe broadband connection. Without internet it works fine. I'm getting the same prob in Linux Mint 9. I've googled for this problem and almost everywhere it is said that this message appears in booting time and after a few moments everything becomes quite ok but my problem doesn't match with them. I don't get this message in booting time. I get this message when I'm on internet.
when i get the boot loader screen i choose Ubuntu , and then i get to choose recovery mode or Normal mode , in either , i get some sort of a list , and then i Get a Black Screen , Nth ,But i hear a sound of May be Ubuntu starting ...so what can i do to see my Ubuntu ????is there is away for help , i just need to run Both my Original Reinstalled Win 7 64 bit ,
View 2 Replies View RelatedWas running Server 8.04 with graphical desktop - no problems. Wanted to upgrade to 10.04, so ran sudo do-release-upgrade --proposed
Upgrade was successful (although so much stuff scrolled by, it's hard to tell if something errored along the way).
Server rebooted and a dark maroon screen said 10.4 is booting, ntp service started etc. and a scrolling series of dots.
Then got a sky blue patterned login screen, so I logged in. Screen then went black, with a movable mouse pointer.
If I do Alt-Tab a panel pops up saying ** NO WINDOWS **
Using Ctrl-Alt-F1 (iirc) got me a command prompt, so I logged in there and ran: startx
This gives me the message:
Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again
So checked runlevel (who -r) and that was set to 2. Changed /etc/init/rc-sysinit.conf so RUNLEVEL=5
Rebooted, logged in again, still got black screen + mouse, and **NO WINDOWS**. Logged into terminal and runlevel=5.
Also tried running dpkg-reconfigure xserver-xorg but that returns immediately without anything apparently happening(?).
how I can get my KDE graphical environment back up ?
F9 has been running great since it came out. I read that one should install F10 before F11 so I did install F10! Everything went great.
(1) Then I tried to install the F11 iso dvd. After the "anaconda started" message at the bottom of a blue screen, the screen went blank and occasionally the message would appear: "cannot display this mode 2:dvi-d". Thinking the monitor had gone into power save, I hit many keys and moved the mouse to no avail.
I gave up! BTW I had checked all media CDs for errors.
(2) then working under F10, a little message appeared from the lower right of the screen asking if I wanted to upgrade to F11.
I accepted and again "cannot display this mode 2:dvi-d" on a black screen after anaconda started on a blue screen. This time no ISO DVD F11. I've never seen such an error message in 11 years (off and on) of using Linux. HD Disk activity was showing on the disk activity light so I let it run all night and part of today. I hit a bunch of keys and moved the mouse and the blue screen returned saying all was done and restarting.
After restart, I seem to have F11 installed. I did a yum update and got some more F11 updates. On the grub screen, the only F11 kernel was the PAE kernel which I selected
and got:
Does F11 have any F11 kernels? BTW running >setup (hd0,0) under F10 grub ruined my XP prof OS on scsi 0 so I reloaded XP Prof from scratch.
Questions:
(1) what is this "cannot display this mode 2:dvi-d"?
(2) Now I cannot boot to Fedora 11 and all the advice on how to reinstall grub has failed failed. Did a rescue and chroot /mnt/sysimage and the fdisk -l
Now XP Prof seems to be on /dev/sdc and Fedora on /dev/sdd. What do I do? In the meantime I have retreated to Fedora 10.
if I reboot the computer, I get the grub menu and am able to choose between Win7 and Fc15. A couple of times during installation the screen flashed black and diplayed a message for a brief second. I can't read that fast but it says something like "DRM nouveau- unknown or unsupported chipset" and one more line that I can't catch. When this happens, I see the pre-login loading screen, the one that shows an icon of a hard drive, network, and so on as each resource is secured. I can log back in, but this starts a new session- it doesn't remember what I was doing. I had to redo the install and setup several times because of this.
I can log in and so on normally, but the black screen and message will appear at random, forcing me to start all over, which is really frustrating. what's going on? Is it the video card? How do I install a driver for it? Also, the hard drive in question has been through a lot. could it have a bad sector or something? Windows didn't even want to "see" it, that's why Fedora is installed on there.
I have used Universal USB Installer to extract the xubuntu 10.10 iso and install onto a flash drive. I would like to try a live version of xubuntu that boots from a flash drive. When attempting to boot from the flash drive, the screen effectively freezes after displaying the syslinux / ebios copyright message, with a flashing cursor.
Does anyone know a possible cause or solution? Information that may be useful: I am using a 4GB flash drive, formatted as FAT32. I formatted once using the Universal USB Installer, but some files were left on the drive, so I have reformatted it using the option provided by the Windows interface, (and reinstalled xubuntu.)
When I opt to install onto USB with a 2GB persistence file using Universal USB Installer, the installation processes hangs with a dialogue saying there are 0 seconds left to copy, until the dialogue is forcefully shut (and installation appears to be successful). When I select no persistence file, the process does not hang. (I am faced with the same aforementioned problem at boot time, regardless.)
I have not checked the md5sum (though I have no reason to suspect it will fail.) I have downloaded a simple programme which checks a single md5sum against a single file, although I am unsure which file I should check against in the case of xubuntu, and if the md5sum.txt file represents a single md5sum.
I am using Windows Vista on an old Toshiba Satellite. I am new to using linux, and am very unfamiliar with the the setup and installation procedure.
When i open my pc and load ubuntu 9.10 a black screen opens and i should write my user and then my password i was doing something in the terminal last time but i don't remember what how can i fix it ? i don't care if i lost data
View 4 Replies View RelatedI am working with linux special edition LXFS Installed everything from the disk, works all fine but sometimes Linux shuts down suddenly and the following message appeals on a black screen. ' (proces 271) GLIB - warning getpwuid_r() : failed due to unknown uster id co) ' When I restart the computer everything is OK again. but than later it happens again.
View 1 Replies View RelatedApology for dual post I realized was in wrong place.Created verified 11.3 live CDInserted, restarted, welcome screen, choices next, I choose installation.Kernel loaded then black blank screen guess you call it a freeze upWindows 7 Home Premium 64-bit Edition Partitioned plenty room
View 9 Replies View RelatedI configured my printer via YaST (Suse 11.3). YaST finds my printer and offers me the Gutenprint driver: Epson Stylus D120 with driver Epson Stylus D120 - CUPS+Gutenprint v5.2.4 I selected this driver and finished the configuration.
The problem now is, that if I print something, the printer only prints a totally black page. How can I solve this? Should I use another driver?
PS: With Suse 11.2 and Gutenprint driver it worked.
I have an HP Printer which prints black horizontal lines after each line or colors an entire blank line black, so a blank page will come out all black. Others who have access to the Printer are able to print well, without any problem.
View 1 Replies View RelatedI need to know I/O stats per process. When executed dstat give the bellow error message.
dstat -M topio -d -M topbio
Module topio failed to load. (No module named dstat_topio)
Module topbio failed to load. (No module named dstat_topbio)
CentOS release 5.3 (Final)
uname -r => 2.6.18-128.2.1.el5
How to resolve the above error message
I just got an update notice two hours ago and after updating I rebooted my machine to find that it no longer boots. The update was for 23 bug fixes for Nvidia drivers and Nvidia support software. I get a black screen with the message "serial8250: too much work for irq17" and a blinking cursor. How do I recover from this?
View 14 Replies View Relatedi have just installed Ubuntu 10.10 on a pre installed windows 7 system. Ubuntu is working really well but the only problem is that when I try to boot into windows,
I get the windows sign and then I get a black screen and windows does not load. It seems to be an easy problem to solve because I can actually boot windows 7 in
safe mode with no problems at all! The problem is there when I try to boot windows 7 normally. To be honest I only need windows for a project that uses MSQL server.
I guess I messed around with my computer a little too much when I was bored. I tried installing compiz and emerald and my computer locked up. Rebooted and then it stays on a black screen. Rebooted and tried safe mode now. Removed emerald by command prompt to see if that would work and rebooted.
View 3 Replies View RelatedI'm struggling on installing a KONICA-MINOLTA printer magicolor 4695MF printing properly with Linux Mint Debian Edition (up to date). The test page works fine...
KONICA-MINOLTA delivers 2 PPDs: one for standard printing and one for OpenOffice printing (available on the KONICA-MINOLTA support site).
Leaving a side the one for OpenOffice which is poor in using the capabilities of the printer, I concentrate only on the global one (M4695PX.ppd).
It's much more difficult for other applications, starting with EVINCE: some PDF files are printed properly (i.e. those generated in OpenOffice by the CUPS PDF printer), others come out as one only blank page, regardless to the original length of the document.
So documents received from 3rd party may be "printable" or not. And trust Murphy, the most critical aren't printed...
Attached, the troubleshooting file generated by [system-config-printer] => [URL] ...
I want to watch a certain video on [url]...., but I get an error message instead. Some videos can be played, so I'm thinking it's a form of restriction, but I can't be sure.I tried using a few proxies, but on some the error message persists and on others the video doesn't load. I'm running Ubuntu 9.10 and Firefox 3.5.8.
View 2 Replies View RelatedI was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View RelatedOk so i have just searched and searched and i have minecraft on my cumputer and i run it and click run offline and it goes black and after about 5-10 seconds this error comes up in the minecraft window
--- BEGIN ERROR REPORT a1dce528 --------
Generated 15/04/11 12:49 PM
Minecraft: Minecraft Alpha v1.1.2
[code]....
I have been trying to install programs and I keep getting a screen error message. and it does it on every package i install unless i remove screen.
[code]...
I just recently updated Ubuntu, and it prompted me to restart. Now when I try to start I get the error message " you need to load the kernel first".
View 1 Replies View RelatedI have ubuntu CD. When I try to install it inside the window through wubi installer. I choose install inside the window. After installing when computer reboots. I got two option. When I choose ubuntu for boot. After 5-6 seconds a black screen appears like command and installation stopped here. {This screen is full of lines, somthing like...Kvasprintf..//.... acpi,,??//. It says lots of about ACPI. What should I do. When I boot through ubuntu cd, same problem arrives. I am new to ubuntu.}
View 1 Replies View RelatedI cant seem to install Ubuntu 9.10 at all. At 15% I get the following Error Message Input/output Error During Read On/dev/sda then I get the creation of swapspace in partition #5 of SCSI1(0,0,0) (SDA) Failed. Ive tried 6 times already. Im getting no sound at all. How can I change the screen resolution. 800 x 600 is the highest it will go. Im getting really discouraged with Ubuntu. Alot of people seem to have the same problems I am having but there is no solutions. I've checked the MEMTEST and passed, done a disk check and passed.
View 9 Replies View RelatedI actually have two reasons for posting this. One is to see if there's an actual name for characters like this:Hopefully that will show up correctly for you. If not, it's a little box with four numbers in it, one in each corner. I don't know their name or their reason for showing up, so it's hard to look for help.
My main problem, though, is that I wrote a program that prints some output to a console using ncurses as it runs. These characters show up on the console, seemingly at random, and disturb the whole thing. Sometimes I'll also get sets of characters like "[13;" I'm not printing anything bizarre on there, just strings and floating-point numbers.
I'm trying to install Fedora 11 on a Dell Latitude c810 (PIII 1ghz, 256mb ram, GeForce2 GO)
When trying to boot from the Live CD it goes to the first fedora boot screen where it counts down from 10 then tries to boot.
It then says "IO Apic resources could not be allocated" then moves onto a fedora loading bar which completes... but the next screen is completely black, I've tried letting it stay there for 10 or so minutes but nothing happens.