Ubuntu Installation :: Cant Boot Windows 7 / Getting A Black Screen And Windows Does Not Load?
Mar 21, 2011
i have just installed Ubuntu 10.10 on a pre installed windows 7 system. Ubuntu is working really well but the only problem is that when I try to boot into windows,
I get the windows sign and then I get a black screen and windows does not load. It seems to be an easy problem to solve because I can actually boot windows 7 in
safe mode with no problems at all! The problem is there when I try to boot windows 7 normally. To be honest I only need windows for a project that uses MSQL server.
View 9 Replies
ADVERTISEMENT
Mar 15, 2009
I currently have a successful dual boot of XP and Fedora 10. I need to re-format my windows partition and re-install XP. When I use the windows CD, it asks to boot from cd. I hit any key and the screen goes black and stays there. XP is the primary OS (C, fedora is the secondary (D. Any thoughts? I still need Windows, because I am just learning Fedora.
View 2 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Apr 27, 2010
I've had Windows 7 installed for a few months now and would like to install Fedora 12 on a separate partition. I've tried this three times now, all of them ending with something wrong. The problem that exists for me now is that when I install Fedora 12 and boot up for the first time in GRUB, Fedora 12 works fine. ut when I boot into Windows 7 from GRUB, it just comes up with a black screen and says "BOOTMGR is missing; press ctrl + alt + del to restart" at the top. I don't believe that GRUB is booting into the wrong partition because I have no Windows recovery partition, just Windows 7. Also when I try and fix the Windows 7 partition with the system recovery disk, it says that the volume is corrupt every time. At this point I have everything backed up on a separate drive so I'm open to try installing Fedora 12 again even if it risks screwing up my Windows 7 partition, I would really just like to have a functioning dual boot.
View 2 Replies
View Related
May 3, 2010
I dual-boot Windows 7 and Ubuntu. Sometime between 4/18 and a few days ago, something happened with Windows booting up. Ubuntu boots fine, but whenever I try to boot Windows, it just goes to a black screen with a blinking cursor (the command line kind, not a pointer). At first I thought it was Windows, but I have run the repair CD and executed chkdsk /f and chkdsk /r on all partition related to windows. No effect.
I ran a system check designed for issues with booting up, and it found no errors. I have looked at my GRUB files, and they all look fine. I am not sure if it is GRUB or Windows. I tried reinstalling the Windows boot-loader, and it had the same effect, the only difference is that it bypassed GRUB. The reason I think it may be GRUB is that the error happened around the same time as me upgrading from Karmic to the Lucid RC. I have posted this on a Windows 7 forum.
View 9 Replies
View Related
Nov 17, 2010
I have windows 7 and I'd like to install opensuse 11.3. I have tried with liveCD, live usb, live dvd, but when I click installation, it shows "kernel loading", and when it finishes the loading, all I get is a black screen. Sometimes, when I try with the live CD method it reboots and the same happens again.
In my other computer with XP installed inside, it works immediately. I have tried to change video mode to text and vesa mode, also I have typed "acpi=off noapic edd=off" in the boot options line, but it didn't worked.
The black screen appears not only for the installation option, but also when I choose boot live CD, and check installation media. By the way, I have checked the downloaded iso with md5 checker, and it's the right file.
View 9 Replies
View Related
Dec 17, 2009
I have installed F12 on the remaining space on my disk and now Windows does not boot anymore. I get to Grub and choose windows and then just get black screen with flashing cursor.
View 8 Replies
View Related
Nov 3, 2010
when i get the boot loader screen i choose Ubuntu , and then i get to choose recovery mode or Normal mode , in either , i get some sort of a list , and then i Get a Black Screen , Nth ,But i hear a sound of May be Ubuntu starting ...so what can i do to see my Ubuntu ????is there is away for help , i just need to run Both my Original Reinstalled Win 7 64 bit ,
View 2 Replies
View Related
Jan 18, 2010
I managed somehow to successfully install a dual boot with Ubuntu 9.02 and Windows XP. Ubuntu was on a PATA drive and the WinXP was on a SATA drive. The SATA drive was configured to boot first. As I was having problems with Ubuntu I booted into WinXP, re-formatted the PATA drive, then restarted the computer and installed Ubuntu 9.10. It all went well.I rebooted the machine and the following message was on the screen:
GRUB Loading stage1.5.GRUB Loading, please wait....Error 17
I rebooted, changed the boot order so that the PATA disk (Ubuntu) started first, then the SATA(WinXP). Ubuntu loaded up the dual boot screen.I chose WINXP, but I was greeted with a black screen.I rebooted again and chose to load Ubuntu, which it did without a hitch.what I should do to restore my access to WinXP? Or should I start again? If so, how?
View 9 Replies
View Related
Jul 19, 2010
I installed ubuntu 10.04, aftert that i cluld not able to start windows xp,Please find the details about my hard disk
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
View 2 Replies
View Related
Jun 8, 2011
I installed Ubuntu 11.04 on a separate partition, with Grub being in it own partition. When I start the PC only windows Xp is available. So how do I get grub or Ubuntu load with windows xp boot loader? I tried with Live cd, the sudo grub but then it says command not found. I think its because Ubuntu 11.04 uses grub 2.
View 1 Replies
View Related
May 6, 2010
I'm running an Acer 1810Tz, dual boot with win7.Under 9.10 and Grub I had no boot issues, however I have just completed the upgrade to 10.04 and upgraded GRUB to GRUB2.Everything boots just fine into Ubuntu, and my GRUB menu looks right, but when I select the Windows 7 option, the machine just hangs with a black screen, white cursor top left. I'm sure this is a trivial problem, something overwritten that shouldn't have been perhaps, but I have no clue where to start.
View 6 Replies
View Related
Apr 24, 2010
I am unable to load Ubuntu onto computer as dual boot or inside windows. Thus scanned the CD and found it has 23 errors.Are these files suppose to be on the CD?casper, .disk, install, install, isolinux, pics, pool, pressed, autorun, md5sum.
View 4 Replies
View Related
Sep 16, 2010
I'm new to linux, and I'm just trying to learn OpenSUSE. I just installed it and I have a few quick questions. #1 I accidentally installed the "OpenSUSE Installer (LOCAL)" on Windows 7, so now I get the option to choose windows or the installer at the windows boot screen. I ended up just installing OpenSUSE on a completely different HD (my original intent) from a burned DVD, so this installer is useless and I don't know how to remove it.
#2 After installing opensuse on my second HD, the boot screen is now SUSE's instead of Windows, and I can choose suse's desktop, the suse failsafe, windows 1, and windows 2. Windows 1 brings me to the windows boot screen with the choice i mentioned above (windows or the local installer i accidentally installed), and windows 2 i assume is my second windows partition which is just my SWAP file, and selecting it does nothing (which would make sense if thats all it is).
My question here is how do I make it so my default boot screen is the windows one with an option between windows 7 or suse? Or would this require reinstalling the system? If it does and its simple enough to explain please do I wouldnt mind removing it and reinstalling at this point, I would just wipe my whole second HD from windows.
#3 I have a netgear adapter. unfortunitly i'm not at home right now and I don't remember the model, so I'll provide that this evening if necessary. What I do know is they do not have a driver for linux. I've found ACX100, but I didn't find my netgear adapter listed on their website. I also found NDISWrapper, but thats for XP and I still don't know if that'll work. I will of course try both unless someone here has a better solution. If anyone knows anything that will work on any netgear adapter for linux please let me know, if not then I'll provide the model later on.
View 1 Replies
View Related
Jun 17, 2010
I got Wubi since I have no partitioning experience, following this guide by psychocats: [url]
Everything went just like the guide said it would at first. My problem is, once I reboot, I don't get the Windows Boot Manager screen at all; more specifically this screen:
It just reboots as windows like nothing ever happened, and the other boot options are not related to either wubi or ubuntu at all.
As the sticky indicated, I have tried uninstalling and reinstalling wubi several times with the same results.
View 9 Replies
View Related
Jul 25, 2010
I recently installed Ubuntu 10.04 and now when I attempt to boot into Windows, it just goes to a blank screen. I have some stuff on my Windows partition that I would prefer not to lose (documents, bookmarks, etc.)
I tried running
Code:
But same result. I also followed the instructions here to create a Boot Info script. Results attached.
View 2 Replies
View Related
Jun 20, 2011
Ubuntu and windows 7 were running in harmony prior to a reinstallation of windows 7. Earlier i would get a screen where i could select either windows or ubuntu to boot from. Now, however, my system seems to bypass that completely.
View 2 Replies
View Related
Apr 25, 2011
Using Ubuntu and any Linux OS. I installed Ubuntu using the Wubi installer. Everything went fine. When the install wizard completed and asked to Reboot Now, I did. When my computer rebooted, the Windows Boot Manager doesn't appear and it goes straight to Windows.
I'm using 32 bit Vista and have an AMD Athlon X2 Dual Core Processor 5000+. When using Wubi, the download defaults to the AMD 64 version and that is what I have installed.
View 3 Replies
View Related
Mar 18, 2010
I installed windows xp on my tobisha satellite l305, then installed ubuntu 9.10..my friend's laptop had vista and was SOOO bogged down from viruses, so he wanted to try ubuntu. We installed ubuntu, leaving the other half of his hard drive unallocated.Afterwards we installed xp, on the unallocated space, but it wouldn't let me dual boot... it would boot directly into xp, however, the ubuntu partition was still there because through the file system in xp we could find it.So then run gparted on a live CD, delete the ubuntu parition, leaving it unallocated, then installed it over that unallocated space.
now, when i dual boot it shows on the grub page the option to boot to ubuntu, ubuntu (recovery) and these two memory test things that when i ran it just shows a BIOS looking screen.testing my memory. However, on the desktop i have mounted 79gb which has all the windows files in it.so how do I tell ubuntu to stop hoarding everything and share the boot screen with windows xp?
View 2 Replies
View Related
Aug 5, 2010
I recently installed Lucid Lynx inside my Windows XP using Wubi. When I restart I don't have a boot screen giving me the option to boot into either or, it just boots directly into XP. How do I fix this so I can boot into Lucid?
View 1 Replies
View Related
Dec 31, 2010
I have just installed Linux on a partition of my hard drive. Computer boots up and gives me the grub boot screen where I can choose from: ubuntu, some memory tests and windows recovery environment (loader). But no Windows Vista. When I boot the windows recovery option the windows boot loading screen comes up but then the screen turns blank but the hard drive is still working and the wifi light also comes on my keyboard. Ubuntu is working completely fine I just need to find a way of getting Grub to display Vista instead of the Recovery environment.
Here is my Boot Info Script: .....
View 9 Replies
View Related
Jun 23, 2010
Was running Server 8.04 with graphical desktop - no problems. Wanted to upgrade to 10.04, so ran sudo do-release-upgrade --proposed
Upgrade was successful (although so much stuff scrolled by, it's hard to tell if something errored along the way).
Server rebooted and a dark maroon screen said 10.4 is booting, ntp service started etc. and a scrolling series of dots.
Then got a sky blue patterned login screen, so I logged in. Screen then went black, with a movable mouse pointer.
If I do Alt-Tab a panel pops up saying ** NO WINDOWS **
Using Ctrl-Alt-F1 (iirc) got me a command prompt, so I logged in there and ran: startx
This gives me the message:
Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again
So checked runlevel (who -r) and that was set to 2. Changed /etc/init/rc-sysinit.conf so RUNLEVEL=5
Rebooted, logged in again, still got black screen + mouse, and **NO WINDOWS**. Logged into terminal and runlevel=5.
Also tried running dpkg-reconfigure xserver-xorg but that returns immediately without anything apparently happening(?).
how I can get my KDE graphical environment back up ?
View 5 Replies
View Related
Jul 8, 2011
I have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
View 2 Replies
View Related
Mar 7, 2010
i initilally installed ubuntu 9.10 then installed windows 7 ,then i recovered grub2 using livecd as told in the post [URL] i did "sudo update-grub" and got windows 7 menu entry but when i select that entry windows 7 does not load but the grub2 is reloaded again.
i cant boot to windows 7.
Windows 7 have 100 mb partition "System Reserved" the grub2 points to that partition but still windows 7 not loaded.
sudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3c3a81f5
[Code]....
View 3 Replies
View Related
May 7, 2010
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
View 3 Replies
View Related
May 1, 2010
I have just updated to 10.04 on my Dell Insperon 8200 laptop, and all seems well with Linux.My problem is that although it shows in Grub Windows XP will not load. I just get a blank screen with a flashing cursor.I have tried to grub-mkconfig and grub-update, both of which reported successful results.However on reboot I still get a blank screen for windows.This was not an issue with 9.04 and 9.10.so I don't think it is the machine.
View 5 Replies
View Related
Apr 30, 2010
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
View 9 Replies
View Related
Mar 5, 2011
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
View 9 Replies
View Related
Apr 6, 2011
A colleague of mine was studying at the University of Vienna and saw an application which was based on linux whereby other pc's booted from it and if on the server they had set it to force a clean install on that PC it would download and install a windows image. Does anyone know of the app or could point me in the direction of a similar app.
View 5 Replies
View Related
May 27, 2011
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies
View Related
