Fedora Installation :: 11 Install - Black Screen - IO Apic Error

Jul 9, 2009

I'm trying to install Fedora 11 on a Dell Latitude c810 (PIII 1ghz, 256mb ram, GeForce2 GO)

When trying to boot from the Live CD it goes to the first fedora boot screen where it counts down from 10 then tries to boot.

It then says "IO Apic resources could not be allocated" then moves onto a fedora loading bar which completes... but the next screen is completely black, I've tried letting it stay there for 10 or so minutes but nothing happens.

View 7 Replies


ADVERTISEMENT

Ubuntu Installation :: Boot From CD And Install Also Have Screen Black With 1000 Ligne Error?

Jan 1, 2010

Im newer in ubuntu i try to install ubuntu 9.10 in my Laptop HP DV5 Core2Duo 4Go Ram rin Windows 7 32bits and in Disc C: already windows 7 install on then i want install the both in th same HDD, like the same operation i make it in my Desktop Dell and it work perfectly, but now i have a error message please see Screenshot and I try to boot from CD and install Ubunto also i have screen black with 1000 ligne error

View 7 Replies View Related

Fedora Installation :: X86 64 Black Screen At Install?

Jul 19, 2009

why do i get the black screen at install just after when it loads

View 3 Replies View Related

Fedora Installation :: Black Screen After Fresh Install?

Dec 8, 2009

Ok, I booted with the live cd and used Fdisk to delete all partitions and wipe the drive. I used the "Replace existing Linux system" install option and let it roll. So I reboot to the screen Flashing a _ then just black...System Info:GIGABYTE GA-EP45-UD3L LGA 775 Intel P45 ATX Intel Motherboard Intel Core 2 Quad Q6600 Kentsfield 2.4GHz 2 x 4MB L2 Cache LGA 775 Quad-Core Processor MSI R4850-T2D512 Radeon HD 4850 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video CardSeagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard DriveKingston HyperX 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model KHX8500D2K2/2GRYes i did just copy my old newegg orders I'm brand new to fedora as well so I apologize if this a newb mistake.---------- Post added at 05:54 PM CST ---------- Previous post was at 03:41 PM CST ----------Update: I went and wiped the drive again and tried a different install method (use entire drive)After rebooting i spammed esc and got into grub and loaded fedora in nomodeset After going thro all the lisence and reg stuff it prompted me to log in, I did and once again im left with a black screen with a _

View 11 Replies View Related

Fedora Installation :: F13 Black Screen During Install From Any Source?

Jun 26, 2010

trying to install F13 onto an older HP a1610n, which uses an nvidia 6150LE chipset. While booting from the install media, the screen goes completely black. The machine isn't hung, as from the DVD activity LED, it's still dutifully doing its thing, just not letting me see any of it. I'm thinking/hoping some kernel parameters might help, but I can't seem to find out what they would be.

View 1 Replies View Related

Fedora Installation :: Can't Install \ Got A Black Screen With A Bunch Of Stuff?

Jul 3, 2009

I made a thread asking if I can install fedora on a compThread:Everyone said yes ( P.S. Im using the LXDE thing that bob said), but when I put the disk in and boot from it.I got a black screen with a bunch of stuff on it and it just repeated every couple of minutes.So, am I stuck on XP? ( had the same problem with ubuntu 8.10, when trying to install).

View 6 Replies View Related

Fedora Installation :: Fresh Install Hangs On Boot / Black Screen Blinking Cursor

Aug 9, 2011

After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).

The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.

View 5 Replies View Related

Fedora Installation :: Can't Install FC10 Or FC11 For Desktop With Intel GMA X4500HD Graphics - Screen Goes Black

Jul 20, 2009

I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.

View 1 Replies View Related

Fedora :: IO APIC Resources Couldn't Be Allocated Error When Booting Off FC11 Live CD?

Aug 28, 2009

FC11/KDE-live Cd

The error is below;

apic is getting timing mode sailed. IO apic resources couldn't be allocated

I fed the kernel commands, noapic , noioapic but that didn't work .

View 1 Replies View Related

OpenSUSE Install :: Black Screen With Error 15: File Not Found

Oct 8, 2010

I managed to get following config up and running very nicely with an 11.3 installation. But recently I did a clean install of the OS and hoping to preserve my data in the home HD (2TB) partition I did the following operation which resulted in black screen screen with error 15: file not found.

Config: one SSD root (90GB) and swap (30Gb) second HD for home (2TB)

During the installation I reformatted and mounted the SSD with root and swap as above. I left the home HD (2TB) unformatted and mounted as home.

When I did my first boot up, it worked perfectly - Even Fire Fox booted up with my recovered pages as of my last install! However after installing my multi-media codecs, and security updates, etc. to the fresh install I rebooted the system only to discover that I am unable to get past GRUB!

I don't have to lose my data every time I do a fresh install to new ISO release.

View 9 Replies View Related

Software :: Ubuntu 11.4 Install Error Message (Black Screen)

May 1, 2011

3/4 of the way through the install the reboot black screen : The disk drive for / is not ready yet or not present continue to wait; or press S to skip mounting or M for manual recovery . neither works, was running Ubuntu 10.4.

View 1 Replies View Related

Ubuntu Installation :: Minecraft Error Not Black Screen?

Apr 14, 2011

Ok so i have just searched and searched and i have minecraft on my cumputer and i run it and click run offline and it goes black and after about 5-10 seconds this error comes up in the minecraft window

--- BEGIN ERROR REPORT a1dce528 --------
Generated 15/04/11 12:49 PM
Minecraft: Minecraft Alpha v1.1.2

[code]....

View 3 Replies View Related

Ubuntu Installation :: Not Booting Give Error And Black Screen

Jan 24, 2011

I have ubuntu CD. When I try to install it inside the window through wubi installer. I choose install inside the window. After installing when computer reboots. I got two option. When I choose ubuntu for boot. After 5-6 seconds a black screen appears like command and installation stopped here. {This screen is full of lines, somthing like...Kvasprintf..//.... acpi,,??//. It says lots of about ACPI. What should I do. When I boot through ubuntu cd, same problem arrives. I am new to ubuntu.}

View 1 Replies View Related

Fedora Installation :: IO APIC Resources Couldn't Be Allocated

Oct 12, 2009

i am trying to install fedora 11 kde on my desktop, but after restarting computer, then appears error message "IO APIC resources couldnt be allocated, buffer I/O error on device sr0" i am not sure what to do next?

View 8 Replies View Related

Fedora Hardware :: Black Screen \ Can Force A Shutdown, Login And Get The Same Black Screen?

Mar 6, 2010

I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.

View 14 Replies View Related

Ubuntu Installation :: 10.10 - Instant Flash Of Error Message On Black Screen

May 19, 2011

I have the normal OS choices menu (Windows XP or Unbuntu) but when I choose ubuntu I get an instant flash of an error message on a black screen so quick I cannot read the whole thing but I caught "error" and "format" and then the computer reboots. I have no problem getting into Windows.

View 5 Replies View Related

Fedora Installation :: Timer Not Connected To IO-APIC - Kernel Panic Not Syncing

Aug 1, 2009

I was able to copy the iso file and tried the installation however I stubbled upon the same problem I had when I tried installing Fedora 11. The message I received was "(1) (0.048001) MP-BIOS bug:8254 timer not connected to IO-APIC (2) (0.064001) Kernel panic-not syncing:IO-APIC + timer doesn't work Book with apic debug and send a report. Then try booting with the 'no apic-option'.

View 4 Replies View Related

OpenSUSE Install :: Black Screen After 1/2 Of Installation?

Mar 2, 2010

I have been using OpenSuse at work for years. My Windows 7 machine crashed on me. Instead of spending the time to fix it, I decided to take the plunge and install 11.2 on my home system. I have 4 one TB drives. My RAID card has a 2x2 1/0 RAID array defined (sdb, sdc, sdc, and sde). A fifth hard drive, outside of the arrary, which is a 250GB drive (sda). It is a software RAID. Here are the partitions I set up in the installer.

On the raid:
1.75 TB on /home
2.01 GB on swap
48.55 GB on /tmp
Off of the raid:
sda1 115 GB /
sda2115 GB /boot

(I know these are really big but I did not want to put any data outside of the RAID) In the final Installation Settings screen, I chose Booting and change from booting from the MBR to the /boot partition. The boot loader type is Grub and the status location is at /dev/sda2. I select Install and it installs without any error message.

After it installs, it restarts and I press ESC to see what is happening. It skips boot.cycle and continues to load to "starting HAL daemon ...done" and then the cursed black screen. I cannot SSH into it. It just sits there and I have to do a hard resest. Once I restart it, it boots into the non-RAD drive I get the follwing error message:

GRUB ..(it went to fast for me to get the rest of it)(hd1/1) message: file not found and I get the option the change the boot options of the Desktop -- openSUSE 11.2 and Failsage -- openSUSE 11.2 . I select e to edit the boot section of desktop and see

root (hd1,1)
kernal /vmlinz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-ST32508...
intrd /initrd-2.6.31.5-0.1-desktop.

I tried changing the root (hd1,1) to 0,1 1,0 2,0, etc with no luck.What do I do? I need to boot into OpenSUSE and finish the cursed installation.

PS: You can tell I work IT with the uber amount of details I put into this

View 6 Replies View Related

Ubuntu Installation :: Black Screen During 10.04 Install?

May 27, 2010

I've been trying to install Ubuntu 10.04 on my Dell XPS 630 but every time i select INSTALL or TRY UBUNTU when booting from the cd, all i get is a black screen with a white blinking cursor. I have tried various options in the F6 menu but nothing has worked. I know the CD is working because I was able to install it inside Windows and dual boot, but I wish to do a fresh install.

View 9 Replies View Related

Ubuntu Installation :: Can't Install 10.04 - Because Screen Goes Black

Sep 13, 2010

I'm so desperate about my problems with installing ubuntu. I got a Fujitsu Siemens Computer AMD Athlon 64 Processor 3200+ 2.01 GHz and 1,50 gb RAM. I got Windows XP home edition on my computer, but i wanna completely switch to ubuntu.

At first I tried to install it with wubi, but it won't work always the same problem.

Then I tried it with the Live CD and tried demo and not install, but it fails. First there is a purple screen with a keyboard and a little guy in a circle, then there's a _ in a black screen blinking, and after that my monitor goes into standby mode. The CD is still loaded from the harddrive, but nothing happens. It feels like the Screen froze down and I can't see anything, what's going on.

I tried it with just installing, alternate install, but it's everytime the same problem.

View 4 Replies View Related

Ubuntu Installation :: Black Log On Screen After Install

Dec 5, 2010

After install I tried to install my video. Which happens to be nvidia and of course after reboot I now get a black screen showing login and password but it will not work I can only get in through recovery. I have a nvidia ge force 9500gt.

View 6 Replies View Related

Ubuntu Installation :: After Install 11.04 Only Black Screen Appear?

Apr 29, 2011

after i installed ubuntu 11.04 and restart .. nothing appear only black screen i think my problem in my vga card ....i have switchable one in my laptop (ATI Radeon HD 5600 /intel )

View 9 Replies View Related

Ubuntu Installation :: Will Not Install - Screen Goes Black

Jun 11, 2011

I boot from my USB, and when I try to install my screen starts showing a bunch of white words while scrolling, then my screen goes black and my laptop stops running even though it is still on. I have also tried just running it, but the same thing basically happens.

View 5 Replies View Related

Debian Installation :: Screen Goes Black On First Boot After Install

Aug 22, 2014

I thought I'd breathe some new life into my aging PowerMac G5 desktop computer by installing debian. I burned the CD and ran the installer and everything installed okay, but when I went to boot it up for the first time, the screen blacked out after a few seconds of scrolling text and shows no signs of life after that. The computer just stops sending video to the monitor, and the only thing I can do is shut it down by holding down the power key.

View 13 Replies View Related

Debian Installation :: KDE Install BLACK Screen On Reboot

Mar 8, 2010

I've just put a fresh install of 64 bit Lenny on my new HP server. All went well so I thought to install KDE. On reboot, the screen just goes black.Could I have some helpful suggestions on how to start working out what the problem could be?

View 7 Replies View Related

OpenSUSE Install :: Black Screen During Installation 11.3 (first Step)?

Jul 20, 2010

I have a problem after "Loading Linux Kernel - 100%".It mean when I chose "Installation" or "Check installation media" after boot screen, I see "Loading Linux Kernel" from 0% to 99% and after that I see only Black screen for long time. Even NUM LOCK key or Ctrl+alt+del has no resultThere is no a problem with 11.2 and 11.1(current OS).Machine: HP xw8400, 2 CPU XEON 3.0Ghz, 4GB RAM, 2x250GB HDD SATA, NVIDIA Quattro FX 1500 256MB.The same problem with VirtualBox (on the same PC).

Last line in "text mode Installation" is :
...
[ 0.040974] Checking 'hit' instruction... OK.

[code]....

View 9 Replies View Related

Install :: OpenSUSE 11.3 Black Screen During Installation / Solve This?

Jan 12, 2011

Configuration: AMD 2500+, 2GB RAM, ATI HD3850 AGP
Problem: Can not install OpenSUSE 11.3. Boot from the disc - the installation screen resolutions, modes of installation - everything is in order. But when the installation can proceed - loading (logo) and just a black screen - possibly the installation goes - but no picture. Also try to set mode "vesa" - loading equipment "ok" ... "ok" ... "ok" ... "ok" ... and again in the black screen.

View 9 Replies View Related

Ubuntu Installation :: Screen Goes Black After Beginning The Install?

Jan 12, 2010

I burned a copy of Ubuntu 9.10 and decided to use it to build up my little server. All was well initially. The CD booted, the language selection came up (I selected English), then there was the option to Try, Install, boot from first hard-drive, etc. I chose install and figured I'd nuke the original drive since everything that I need is off there. The little Ubuntu logo came up (it was shining/pulsating) for about 5 minutes. This went on for some time (the DVD-ROM spinning the entire time furiously) and then..The screen went black and there was a message saying that there was no input to the monitor (as some monitors are prone to do if you unplug/loosen the cable.) I rebooted, burned new CDs, etc. To no avail!

I have an HP (quite reliable in the past.)
* 2.80 Ghz
* 1 gig RAM

View 2 Replies View Related

Ubuntu Installation :: 9.10 - Black Screen During Install On SL510

Feb 1, 2010

I have a Lenovo SL510 thinkpad (CPU 1.80GHz / 2GB / 250GB SATA / Intel GMA X4500 / 15.6" HD LED says the website), totally fresh, just got it today. My goal would be to install Kubuntu 9.10 on this machine. When I try the live CD, screen just goes black, after a while it plays what I assume to be the welcome music. If I try the conventional install screen is just black. The safe graphic mode yielded two grey _, one in the 1/5 and one in the 4/5 of the screen.

View 9 Replies View Related

Ubuntu Installation :: 10.04 Black Screen On The Live CD Or When Trying To Install?

Apr 30, 2010

I want to make a clean install of 10.04 instead of just upgrading from Karmic.However when I run the boot cd I get the new Ubuntu boot up screen (with the five dots) but after a while I get a black screen and at the same time the cd stops running in the drive.The only thing I can do is pressing down the start button until my computer shuts down.I do get the menu to choose to run the live cd or make a new installation, but whatever I choose, I end up with the black screen.

I'm trying to install on an older IBM Thinkpad R50e, with 500 mb RAM so I figured that it was simply just too old to run the new ubuntu. The strange thing however is that the cd is actually running fine from within my Virtual Machine. This I don't get

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved