Ubuntu :: Upgrading To 10.10 - Error "select 'Ubuntu' In The Boot Up Menu Right After The BIOS Screen: Booting ' Ubuntu 10.10, Kernel 2.6.35-25-generic'"
Feb 13, 2011
I have been running Ubuntu 10.04 under Windows 7 (Is this call WUBI?) without any problems for a while. My other machines only run Ubuntu (9.04 & 10.04). I decided to give it a try to the latest Ubuntu 10.10. After going through the successful installation and then rebooting, I am getting the following error message once I select 'Ubuntu' in the boot up menu right after the BIOS screen: Booting ' Ubuntu 10.10, kernel 2.6.35-25-generic'
I installed Ubuntu as a dual-boot system with Windows XP very carefully. Unfortunately, though given the option to boot Windows at the grub menu, when I select it, I get an error. Booting Ubuntu on my other partition works just fine, no issues.
I also attempted to access files from the first partition in Ubuntu using gparted, but once I mounted it, all of my files were not present. I only saw manufacturer files, and many files and folders I didn't recognize.
Also, as an aside, my laptop monitor is suffering from occasional black-outs during use. Ubuntu gave me a little toolbar flag, telling me to go to a website and use the patches given to fix it, but I'm not quite so sure where to input the given patch text. Do I really need to go through the trouble of finding the source code, etc., or is it more simple?
I've installed Slackware64 on a Toshiba Qosmio laptop (booting with ext4, SAMSUNG HM500JI HDD, 3 GB Ram, Intel Core 2 Duo Processor, Intel chipset and graphics).The system boots the huge kernel just fine. But after booting with the generic kernel AND after having prepared a mkinitrd with the mkinitrd generator, the boot process crashes at ~4sec with a panic.
I just did a full install of Slackware64 on my netbook. Everything was sweet until I tried switching to the generic kernel. Even before this, I noticed when I ran the mount command it listed not sda3, which really is the root partition, but /dev/root as the root partition. This also appears in mtab, but not fstab. So yeah, here are the errors when I try booting into the generic kernel:
Code: mounting /dev/sda3 on /mnt failed: No such device No /sbin/init found on rootdev (or not mounted) bin/sh: cant access tty: job control turned off
I've tried rebuilding the mkinitrd_command_generator.sh script several times, as well as lilo.conf. But no success I've looked at some similar old threadss here but most of them are related to slackware 12 and older, so I don't know if these issues are related or not.
I'm currently trying to get to the root of an problem on startup; unfortunatly when booting after the first couple of messages when booting without quiet and with nosplash in the grub menu I still end up with the nice blue background and the slowly filling bubble... I'd like to go back to the old, boring, messy, but much loved and now much missed (least by me) text boot screen where I can see wtf my system is doing and where its hanging during the boot process.
(I know the cause of the hang now but still want to go back to the old fashioned noisy boot environment - not a fan of the windows style silent boot... I like to know what's going on and that my PC hasn't decided to join the French and go on strike, though wouldn't blame my poor netbook if it has, hammering the bleeper doing random number analysis - not something an atom 270 is designed for)
I'm on Ubuntu 10.10 - fresh install 2 days ago, I marked all packages for upgrade in Synaptic, everything upgraded except 'linux-image-2.6.35-22-generic' kernel image. Now everytime I use apt-get or synaptic it takes ages as it tries to update the kernel image every time. The error I am receiving is as follows:
I Installed Fedora 14 about 2 weeks ago and was just settling into using it more or les permanantly and had to turn of the power to do some maintenanace. When I rebooted I got the grub> prompt. As I have already shut down and rebooted several times over the last couple of weeks, I could not se why this happened, so I rebooted and stiull got the same problem. Things I have tried:
[code]...
I am currently using a 64 bit ASUS P75P55-M motherboard.
This week my ubuntu 10.10 was updated via update center. I obtained the new kernel headers 2.6.35-23-generic but now I can't boot using this kernel version and I have to select manually 2.6.35-22-generic in grub. I can see the ubuntu plymouth splash screen but it never rise gnome. where are the boot logs and how to activate them, In /var/log/ I have "boot" file but is empty and in "boot.log" I cant see any usefull information (I have BOOTLOGD_ENABLE=yes in /etc/defaul/bootlogd).
I just upgraded from 9.04 to 9.10 (using Update Manager) in an attempt to get to 10.04. Installation and upgrade seemed to go OK until reboot. Now I only get a black screen - I don't see the grub menu, I don't even see any way to access the BIOS menu- not even a blinking cursor. I can hear it start and I can see the numlocks key go on. Ctrl-Alt-PrtScrn-B does not reboot (nor does Ctrl-Alt-Backspace- but I didn't expect that would) Surprisingly Ctrl-Alt-Del does (or at least it sounds like it does) reboot the system. I do have a NVIDIA cards and after reading around I suspect that this is likely the problem but I have no idea what to do now..
Here's what I've attempted: I figured since I wanted to get to 10.04 anyway and this was so troublesome I could just go do a fresh install with a Live CD or USB to 10.04. However, even with a live CD or USB I still just get a blank screen. Continually holding down F2 (and other function keys to try to access Bios) Holding down Shift while booting Esc while booting Moving the monitor to the VGA port (as opposed to the NVIDIA card).
Other information... Previously I had tried to upgrade to 9.10, but ran into problems with it not recognizing my RAID, so I just found it easier to go back to 9.04. (So although this is likely a graphics problem I guess the possibility is that now it doesn't even see my boot drive- although- if that was the case, I'd assume I wouldn't have the same problems from the CD or USB boot.) My ultimate goal is to get this to 10.04, if I could do it with an upgrade instead of a fresh install I'd prefer that, but at this point just getting back to a functioning computer would be ideal. I see many options in other posts for how to get back once you can access a command line- but since I can't even see that, I'm not sure what to do now.
So I installed Ubuntu 8.04 with Wubi a while ago on my Toshiba Satellite A500/02j and recently uninstalled it (with Wubi). For whatever reason, Windows will not get rid of its bootloader and I cannot access my BIOS settings. I've tried spamming every function key that I have when it boots up but nothing happens (if I press ESCAPE when I'm at the boot menu it restarts). Any idea on how to get rid of it and get me my bios back?
I have some trouble booting the current KDE Live Cd (11.2) on my Laptop. I tried USB and CD both. The laptop hangs on the bios bootscreen and I cant select any further option like a boot device. No problem I have with an Ubuntu CD.
My Slackware boots using the huge kernel. I am not using LILO; I am using GRUB from the extras directory on the DVD. I followed the tutorial @ [URL] up to the point where it discusses modifying LILO. My /boot/grub/menu.lst reads, in part:
# Linux bootable partition config begins title Slackware Linux on (/dev/sda7) root (hd0,6) kernel /boot/vmlinuz root=/dev/sda7 ro vga=normal # Linux bootable partition config ends
This boots the huge kernel. What changes must I make to the above menu.lst entry to boot using the generic kernel?
I've got two laptops running Ubuntu. Both have had Lucid installed from the live cd. I have upgraded one of them to Maverick. Both distributions are running great after they boot up, but I haven't experienced any faster boot times with either distibution. Both boot to Bios and then the screen goes black with a blinking cursor in upper left corner of the screen. The black screen remains for 30 to 45 seconds and then I get the Ubuntu splash screen for maybe 5 seconds, and then desktop. Why am I not seeing faster boot times? I realize 45 to 60 seconds is good compared to other os's, but I anticipated much faster boot times. Shut down on the other hand is quite fast at maybe 5 to 10 seconds. Does anyone else get this black screen on boot? Seems like wasted time cause I can't tell what's going on during the time there is a black screen. This is not a real big deal breaker, as I don't reboot very often, but I just wonder why bootup isn't faster.
i started the installation programme and it went through a couple of options then says it has to restart the laptop when i restarted i got this message before the bios screen and then the computer does nothing
" Booting GRLDR..... Turning on gate a 20 .... Success Srating cmain() .... _"
I am trying to install a Hauppauge 1850 video card into Linux Home automation system (LinuxMCE) which is based on Ubuntu Intrepid (I can't upgrade the kernel since this is what the LinuxMCE distribution supports)I am feeding analog signal to the video card, either through a coax analog connection or an RCA analog connection. I cannot see any picture from the card (I verified that the video card is working properly under a Windows Vista OS)I am trying to use the video card using a lightweight application such as tvtime, xawtv. In all applications I am failing to see an image. (For example, tvtime shows the message "No inputs avialble Cannot open capture device /dev/video0". Right clicking on Input configuration / Change video source doesn't give any options)
I'm trying to boot an SD card on a notebook that does not have BIOS support for booting from the SD slot. Using various how-to's I've figured out how to add additional SD card modules to the initrd.img file on a bootable USB drive such that I can boot Linux installed on the SD card.
However, best I can tell, it loads the kernel and initrd.img from the USB and everything else from the SD card. What I really want is to load the necessary SD modules from the USB and then chainload the SD card such that whatever kernel is on the SD card is loaded instead. Is it possible to chainload to another bootable device after the kernel (with the SD module additions) has already been loaded?
Yast completely overwrites my very customized /boot/grub/menu.lst. I wrote a Perl script to restore the customizations from the previous version (retained in CVS) but this is more than a little annoying. At least Ubuntu asks. How do I stop this idiocy when upgrading the kernel.
I'm currently trying to setup Slackware 13.7 on a server, using software RAID 1. I'm using the README_RAID.TXT document at the root of the Slackware disc as a reference. Anyway, here's what I have so far.
[root@raymonde:~] # fdisk -l /dev/sd{a,b} Disk /dev/sda: 41.1 GB, 41110142976 bytes 255 heads, 63 sectors/track, 4998 cylinders, total 80293248 sectors Units = sectors of 1 * 512 = 512 bytes
[code]....
I created an initrd image using mkinitrd -F, added an according stanza to /etc/lilo.conf and ran 'lilo' after that. Now I can boot on the vanilla huge kernel all right. But I can't seem to boot on the generic kernel. Whenever I try to do this, the boot process stops short on the following error message:
Code:
mount: mounting /dev/md3 on /mnt failed: Device or resource busy ERROR: no /sbin/init found on rootdev
I'm relatively new to Linux and I am dual booting Ubuntu 10.04 LTS and Windows XP and I would like to edit my GRUB menu to allow me to choose Windows XP which is on a 2nd hard drive. But, I can find no menu.lst and there is no GRUB menu while booting up, my computer boots right into Ubuntu. So, how do I enable the boot menu so that I can edit it and use it?
I've been searching the forums for any posts that cover my problem, but most of the booting problems I've found are different from mine.Anywho, the situation:ell laptop, 2 partitions, first is Windows XP, second is Ubuntu Karmic.Whenever I turn on my computer the first loading screen that shows up (is this the BIOS? Excuse my little knowledge of this stuff), before GRUB loads, is really slow. It takes about a minute to load.However, whenever I restart from my XP partition, it suddenly loads fast! And this does not happen when restarting from my Ubuntu partition or anything
So I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
I don't know about you, but I have found the linux kernel to read pretty much any usb drive or sd card, while many bioses, especially, when they are older fail miserably. Now if you got yourself a machine which bios cannot boot from your 16 giga stick, wouldn't it be possible to use linux as kind of a bootstrap, install it on a 1 giga medium, that the bios can boot from and then when the linux kernel is running, give control to the other media that you really want to boot from. This should be doable.
It is basically going from a running kernel and its inird to give control over to another grub or syslinux. Does anybody know if this exists already? Truth is that many bioses are just garbage, old and fail at pretty much all new hardware, so why not use a linux kernel as a crutch, to get away from this old piece of junk? I did similar things already with a software raid, where i had a machine that couldn't boot from a HD that was larger than 150 giga.
I installed a 10 gb HD to put /boot on it and then give control over to some "fancy 21st century technology that can boot from this HUUUGE disks" (as from my dripping from sarcasm voice you can tell that pretty much all BIOSes are a thorn in my side and a P.I.T.A. for me, too often they only do 30% of what I expect them to)
I dual booted my system with Linux Mint on a Windows 7 operating platform. I later thought it would be better to use Ubunta as I am a newbie to the system and there is more help available. I tried to uninstall Linux Mint through Windows but I am not sure I did. I then installed Ubunta from a CD and the whole system crashed. I am now unable to boot beyond the BIOS screen and am using Ubunta CD to access the internet. I would be grateful if you could shed any light on what has happened. Unfortunately I have no separate boot up disc.
after upgrading to lucid lynx ubuntu doesn't boot with the new kernels 2.6.32-22-generic and 2.6.32-23-generic (also in recovery mode). But it's does boot with the previous 2.6.31-21-generic kernel. At the time i was hoping to wait it out, but a new kernel has come and the problem persisted. I've been trying to find a solution for this but somehow, amid lots of failed boot blank black screen threads, i didn't relate to any solution. The boot seems to go well until a pixelated logo appears (before the login screen), then goes to a blank black screen and there it stays stuck with no remedy. Looking into dmesg logs - albeit some differences between 2.6.31-21 and the newer 2.6.32-23 - the failed boot seems proper in both logs. In Xorg logs the differences are bigger but i cannot pinpoint a source for this problem.
