Hardware :: Video Card Error Hauppauge WinTV-HVR 1850 Kernel 2.6.27-17-generic

Sep 4, 2010

I am trying to install a Hauppauge 1850 video card into Linux Home automation system (LinuxMCE) which is based on Ubuntu Intrepid (I can't upgrade the kernel since this is what the LinuxMCE distribution supports)I am feeding analog signal to the video card, either through a coax analog connection or an RCA analog connection. I cannot see any picture from the card (I verified that the video card is working properly under a Windows Vista OS)I am trying to use the video card using a lightweight application such as tvtime, xawtv. In all applications I am failing to see an image. (For example, tvtime shows the message "No inputs avialble Cannot open capture device /dev/video0". Right clicking on Input configuration / Change video source doesn't give any options)

View 9 Replies


ADVERTISEMENT

Hardware :: Hauppauge WinTV PVR-150 Card Recognized As Scanner?

Jul 20, 2009

Upgraded system so I could store more recorded video. Now system identifies the Hauppauge WinTV PVR-150 card as a scanner. I have the original setup disk from Hauppauge but it is not Linux compatable. Running: Ubuntu 9.04 on: AMD Athlon64 X2 Dual Core Processor 5200+

View 11 Replies View Related

Ubuntu :: Unable To Get The Hauppauge WinTV 900 Hybrid

Jan 11, 2010

I can not get my usb dvb-t sick working. It is a hauppauge WinTV-HVR 900 hybrid TV stick.
The number on the backside is: M/R: 65018/BC20 Some time ago I read somewhere that this model was supposed to work with ubuntu 9.10. [URL] it is possible to make it work since the poster appears to be using the same model as I do.But I still have trouble setting it up.

View 1 Replies View Related

Fedora Hardware :: Unable To Use 14 And Hauppauge WinTV-HVR2200

Apr 12, 2011

I just put Hauppauge WinTV-HVR2200 device to my system, however I can't get it working

Code:

$ lspci -s 03:00 -vvv
03:00.0 Multimedia controller: Philips Semiconductors Device 7164 (rev 81)
Subsystem: Hauppauge computer works Inc. Device 8900
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

[code]...

View 4 Replies View Related

Ubuntu Multimedia :: Hauppauge WinTV-HVR 1110 Won't Work

Jun 27, 2010

I bought this tv card because it was listed as working 'out-of-the-box'. Well, it didn't for me. I've googled and forummed for 3 days, tried all the fixes and nothing works.

View 1 Replies View Related

Ubuntu :: Hauppauge WinTV IR Modules Broken In Natty - Previously Working In 10.10

Aug 7, 2011

I am having problems with Natty AMD64 (Ubuntu 11.04) and LIRC/IR-Keytables.

I have a Hauppauge WinTV card (Bt87 (TV card and IR receiver/transmitter) that worked (for the first time) automatically with 10.10 and LIRC. I recently moved over to 11.04, copied my LIRC config files over (hardware.conf, lircd.conf, lircmd.conf, etc), and received the error couldn't find any node at /sys/class/rc/rc*

The modules I had previously been successful with were: lirc_dev & lirc_i2c, as is apropriate for my speific card.

I then learned that Natty incorporated a lot of RC elements in to the kernel, and tried following:[url]

Which suggested removing lirc. At this point, ir-keytable also gives the same error about no node at /sys/class/rc/rc*

I think that I am having a problem with the correct driver being loaded for my card. When I look at a dmesg, the relevant section is: (note: I'm not sure if this dmesg was from before or after I uninstalled LIRC and just tried keytables)

Code:

The 3rd last line makes it seem that the IR capabilities have been recognized further confusing me as to why no /sys/class/rc/rc* has been registered. I've attached an unedited copy of my proc/bus/pci/devices, and below is my lsmod.

Code:

View 1 Replies View Related

Slackware :: Setting Up Initrd - Generic Kernel In Grub2 - Can't Load Generic

Jan 4, 2011

I am trying to figure out how to load the generic kernel in Grub2.

I have run the /usr/hare/mkinitrd/mkinitrd_command_generator.sh and ran the output:

Code:

Why this will not load.

View 10 Replies View Related

Software :: Error Updating Generic Kernel On Ubuntu

Feb 27, 2011

I'm on Ubuntu 10.10 - fresh install 2 days ago, I marked all packages for upgrade in Synaptic, everything upgraded except 'linux-image-2.6.35-22-generic' kernel image. Now everytime I use apt-get or synaptic it takes ages as it tries to update the kernel image every time. The error I am receiving is as follows:

[Code]....

View 3 Replies View Related

Ubuntu :: Error Inserting Uinput (/lib/modules/2.6.32-22-generic/kernel/drivers/input

May 15, 2010

I am trying to use my Wiimote with ubuntu. I have followed the guide on here:[URL].. But I get this error when I run modprobe:

FATAL: Error inserting uinput (/lib/modules/2.6.32-22-generic/kernel/drivers/input/misc/uinput.ko): Operation not permitted

View 2 Replies View Related

Slackware :: Software RAID 1 Versus LILO / Kernel-generic - ERROR: No /sbin/init Found On Rootdev

Jul 1, 2011

I'm currently trying to setup Slackware 13.7 on a server, using software RAID 1. I'm using the README_RAID.TXT document at the root of the Slackware disc as a reference. Anyway, here's what I have so far.

/dev/md1 -> /boot partition
/dev/md2 -> swap partition
/dev/md3 -> / partition

Code:

[root@raymonde:~] # fdisk -l /dev/sd{a,b}
Disk /dev/sda: 41.1 GB, 41110142976 bytes
255 heads, 63 sectors/track, 4998 cylinders, total 80293248 sectors
Units = sectors of 1 * 512 = 512 bytes

[code]....

I created an initrd image using mkinitrd -F, added an according stanza to /etc/lilo.conf and ran 'lilo' after that. Now I can boot on the vanilla huge kernel all right. But I can't seem to boot on the generic kernel. Whenever I try to do this, the boot process stops short on the following error message:

Code:

mount: mounting /dev/md3 on /mnt failed: Device or resource busy
ERROR: no /sbin/init found on rootdev

View 5 Replies View Related

OpenSUSE Multimedia :: Get TV Card (WinTV-HVR 4000 HD) Tuned On DVB-S2 Transponders?

Feb 13, 2010

After some difficulties I succeeded to run this TV card under SUSE 11.1 with kaffeine 0.8.8.Everything works fine except for that the card refuses to tune on a DVB-S2 transponder. (For Example TP 11 on Astra 19.2E)The terminal output looks like this:

Tuning to: Das Erste HD / autocount: 1
Using DVB device 0:0 "Conexant CX24116/CX24118"
tuning DVB-S to 11362000 h 22000000

[code]....

View 1 Replies View Related

Ubuntu Multimedia :: Install WinTv Pvr-250 (Tv-card) On 9.10 Karmic Koala?

Feb 7, 2010

How do I install WinTv pvr-250 (Tv-card) on my ubuntu 9.10 Karmic Koala? I am new to linux and not quite sure to begin. I would like to be able to use it to watch TV on my computer, using VLC, mythTV or similar.

View 3 Replies View Related

Ubuntu Multimedia :: WinTV Card Fails To Initialize Tuner

Sep 11, 2010

I'm running 10.04 64-bit with all stable and pre-release upgrades enabled in a Dell 4-core Inspiron with 8 GB of memory. I just bought a Hauppage WinTV-HVR 1600 and it's detected in the boot process and all firmware is loaded, but then it goes bonkers and spews

[ 24.421795] cx18 0000:02:01.0: firmware: requesting v4l-cx23418-dig.fw
[ 24.612289] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
[ 24.632510] cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes)

[code]....

over and over again. All the info on the Hauppage site and LinuxTV is very obsolete. MythTV initializes, but can't find any channels on either the analog or digital streams.

View 7 Replies View Related

Hardware :: Getting Analog Video Working On A Hauppauge HVR-1800?

Nov 5, 2010

I picked up a Hauppauge WinTV HVR-1800 PCIe TV tuner a few days ago. Digital TV worked fine right out of the box (after setting up the firmware), but I have not been able to get analog video to work at all.If I run mplayer, xawtv or tvtime using /dev/video1 (yes, that is the correct devnode, video0 is a different card in my rig), So, has anyone RECENTLY gotten analog capture working on this card?

View 5 Replies View Related

Ubuntu Multimedia :: How To Enable Your Hauppauge 1250 Tv Card

Dec 18, 2010

This is a writeup to help you enable your Hauppauge 1250 tv tuner card so you can use it with programs such as Mythtv. This will enable multiple cards. I am assuming your card isn't working "out of the box". You can check if it is recognized in the OS by following the instructions in "How to tell if the TV card is recognized" below.

In linux land, the 1250 is not just a 1250 but can be a variety of designations. I own older 1250's which are listed as 1270's. My newer cards are listed as 1255's. These cards usually don't work "out of the box" with linux. You have learn the ropes and enable them yourself. You have to have time on your hands and be a glutton for punishment when it comes to setting up linux but a stable, well running system is worth it. If you need everything done for you and want it "out of the box", you might as well ride back to Bill Gates' Boneless Chicken Ranch.

First off, here is an updated cardlist for the cx23885 driver that is used with the 1250 amongst other tuner cards:

[Code]...

View 9 Replies View Related

Software :: Get Mythtv To Find Channel 4 On Hauppauge 250 Pvr Card?

Nov 8, 2010

I have an old Fisher VHS player with the old 'antenna' connection [one wire] to the TV. It does still work. I connect this to an old Hauppauge 250 pvr card in a box running Ubuntu 10-10.

I want to be able to put old tapes on my disk drive.

Working mainly with MythTv, I can not get it to work. The hardware seems to be working as I have options for tuner1 and other inputs. As channel 4 is no longer 'broadcast' I can't scan for it even with the VCR running.

Would someone please hold my hand an provide the necessary steps to get MythTv working or an alternative.

I have read the five similar threads and numerous other google hits but can't find what I need. Part of my problem is I am also new to Ubuntu and jumping in an out of terminal sessions is no where near what I grew up with in Slackware.

View 2 Replies View Related

Ubuntu Multimedia :: Get Hauppauge USB Live 2 Video Grabber To Work Under 10.04?

Nov 4, 2010

I've been trying to get my Hauppauge USB Live 2 video grabber to work under Ubuntu 10.04. I have installed the drivers, and using TVTime I get a perfect picture - but no sound, and also I can't record with it. I have found a guide on how to get it with sound using MythTV, but it seems I fail at setting it up. It tells me it couldn't find the backend server, but it's running in my terminal.

View 1 Replies View Related

Fedora Hardware :: Kernel (or X?) Which Video Card To Use?

Feb 11, 2010

I have a pretty cool problem. The laptop computer is an Asus UL50VT which has two video cards: an onboard intel Mobile 4 Series Chipset with Integrated Graphics Controller, and an NVidia GeForce G210M. The concept behind having two video cards is that the onboard chip can be used when graphics aren't required (email, programming, etc.), but the NVidia can be used when you need the graphics horsepower. This allows you to maximize battery life. The system came with Windows 7.

I can (now) get X to start by monkeying with the xorg.config file, but it doesn't run well and is getting bogged down. My (uneducated) guess is that if I could clearly make certain that I'm using intel drivers and the intel "card," or better the nvidia drivers and the nvidia card, it would run better. I'd love to be able to set them up in such a way that I can switch them (two different xorg.conf files with a scipt that allows me to select what I want, for instance), but I need to get to first base first and get something working well. So, how can I tell what the system is actually using for drivers AND devices? And, how can I dictate which it is to use?

[Code]....

View 14 Replies View Related

Ubuntu :: Video Card Wont Work On Kernel 2.6.34 And Up?

Nov 8, 2010

i've been trying and trying to get my video card set up in ubuntu 10.04 or 10.10 (it is an ati mobility radeon 7500), I first posted about it here [URL].. and since then nothing has changed. What I would really like to know is why does it work in kernel 2.6.31 but not in anything later. Right now im running arch on my secondary hard drive with kernel 2.6.31 and everything runs great, full open gl, 3d accel etc but when I upgrade to a newer kernel (no matter what distro) my video does not work. Has there been any improvements on this? It was a problem with KMS i kind of found it by accident, its all working now

View 1 Replies View Related

Debian Hardware :: Kernel Modules - Four Drivers Loaded For Video Card

Mar 10, 2011

0 down vote favorite
share [fb] share [tw]
This is the problem I run lspci -v which checks all drivers on my system and more. It says kernel driver in use is nouveau. Then under that it says kernel modules: nvidia recent, nvidia-96, nouveau, nvidiafb. So what it looks like I have 3-4 drivers for my video card loaded and one, nouveau, being used. I think they conflict with each other.

I'm trying to add drivers other then nouveau, because the mouse freezes with it. At this point I can't seem to get rid of nouveau, I go to terminal and type:
sudo apt-get --purge remove xserver-xorg-video-nouveau
And it says that it's not loaded so I can't dump it. lspci-v says nouveau is the driver being used and trying to dump it. It says it isn't installed. I'm confused. I want to dump nouveau, what should I do? I also go into Synaptic package manager and it isn't listed as being installed.

View 1 Replies View Related

Debian Hardware :: Video Card - Failed To Initialize NVidia Kernel Module

Aug 9, 2011

I am trying to get my Debian system running. I have an older Dell Precision 490 with two dual core CPUs. It has 16G Ram, an 150G Intel solid state drive, a 230G data drive, and a 600G backup drive. I have two Samsung monitors attached to the NVIDIA Geforce FX 5xx card. I have been using this machine for several years with Etch, then Lenny, running KDE 3.5. I recently needed to upgrade to Squeeze and KDE4 and have had nothing but problems since. I keep having issues with the video drivers, every time I touch anything the drivers seem to upgrade from the legacy 173 to the current 195.

There have been other library compatibility issues as well (gclib) and the machine has not been stable. This morning the system was running very slowly with X running at 100% (from top) and then the entire system froze. After a hard reboot, X did restart. The Xorg.0.log has the following message:
"Failed to initialize the NVIDIA kernel module! Please ensure that there is a supported NVIDIA GPU in this system, and that the NVIDIA device files have been created properly..."

View 1 Replies View Related

Ubuntu :: Upgrading To 10.10 - Error "select 'Ubuntu' In The Boot Up Menu Right After The BIOS Screen: Booting ' Ubuntu 10.10, Kernel 2.6.35-25-generic'"

Feb 13, 2011

I have been running Ubuntu 10.04 under Windows 7 (Is this call WUBI?) without any problems for a while. My other machines only run Ubuntu (9.04 & 10.04). I decided to give it a try to the latest Ubuntu 10.10. After going through the successful installation and then rebooting, I am getting the following error message once I select 'Ubuntu' in the boot up menu right after the BIOS screen: Booting ' Ubuntu 10.10, kernel 2.6.35-25-generic'

[Code]...

View 7 Replies View Related

Ubuntu Multimedia :: Reinstalling Generic Video Drivers?

Oct 15, 2010

uestion by saying that I don't know anything about how video drivers work under Ubuntu or Linux in general.My situation is as follows: I have installed Ubuntu on a portable hard drive for use on multiple computers, so as such, I chose not to install drivers for a specific video card as I can't be sure of the hardware of the computers I will be using it on. Everything was working fine, but while setting some wine games up, I have managed to "break" my video drivers/video config so now some games give me an error. I have been told that the quickest way to get rid of this error is to reinstall video drivers, but I am lost, as I can't find out what drivers, if any, I have installed. So my question is: how could I go about resetting the configuration and generic drivers that came with the Lucid?

View 1 Replies View Related

Ubuntu Multimedia :: Permanently Set My Video Driver To Generic?

Jul 6, 2011

How do I permanently set my video driver to generic? I have an ATI rage 128 pro video card that I just installed because my onboard video wasn't supported. But it will only work if i go through the recovery and run the session with the generic driver. I've tried to get it to run it permanently through the recovery console, but it won't let me select the option.

View 8 Replies View Related

Ubuntu :: Compile Kernel 2.6.31-20-generic-pae

Feb 24, 2010

I want to compile a custom kernel, because I need a path for a device. Here is what I've done:

Code:
$ cd /media/work/temp/
$ apt-get build-dep --no-install-recommends linux-image-$(uname -r)
$ apt-get source linux-image-$(uname -r)
$ cd linux-2.6.31

[Code].....

View 1 Replies View Related

Ubuntu :: Difference Between Kernel 2.6.35-19-generic And 2.6.35.3

Aug 26, 2010

What is the difference between those kernels that you can install from this PPA:

[URL]

ppa:kernel-ppa/ppa

...which currently has 2.6.35-19.25-generic

AND

[URL]

...which currently has 2.6.35.3-maverick (even has later version 2.6.36-rc2-maverick)

AND

[URL]

...which currently has 2.6.35.3 (even has later versions 2.6.36-rc2 and 2.6.36-rc2-git4)

Are they the same? Which is newer? Is 2.6.35-19-generic = 2.6.35.3?

View 6 Replies View Related

Ubuntu :: Kernel 2.6.35-30-generic & Gnome 2.32.0?

Jun 27, 2011

Just installed the patches/upgrades for the 2.6.35.30 kernel. Ubuntu will not boot without me typing "y" and hitting enter and later hitting the enter key again. Just have a blank screen unless I do this. Discovered what to do by booting into recovery mode. Had to make a display selection. Just guess at the enter key the second time the boot process stopped. I new to Ubuntu so don't know where to look in the logs to provide additional information to help trouble shoot the problem. If some one can guide me as to where to look I'll post log info. Hope this is the right place to post this. If I need to make a bug report let me know.

Forgot to add: HP Pavalion dv5000 (dv5020us to be specific). AMD Turion64 processor. ATI Radeon Mobility 200M video.

View 7 Replies View Related

General :: Does Kernel-generic Use Both Of My Processors

Mar 7, 2010

I was previously using kernel-huge until a slackware update caused some problems for me, so I switched over to kernel-generic but now I'm wondering if it uses both of my cpus on my dual core processor.

View 1 Replies View Related

Slackware :: Switch To The Generic Kernel?

Jun 15, 2011

One thing I always do is switch to the vmlinuz-generic(-smp) kernel in /etc/lilo.conf and build an initrd (see /boot/README.initrd for details). The "huge" kernel used by default is only meant for installing and not recommended for everyday use. It has a lot of drivers you don't need built-in and uses more RAM than the "generic" kernels.

still trying to find my feet and get to know Slackware. In one of my previous threads, 'things to do after installing' i was told the above message. When i installed, it used the huge kernel, but i'm unsure if that was the one that got installed. when i start slackware up, above the login screen it say, �wecome to Linux 2.6.37.6-smp (tty1)� I was wondering how to swich to the generic smp kernel, do I just change the vmlinuz to the desired, in lilo?

View 9 Replies View Related

Fedora :: Generic Kernel Build For Separate Box?

Apr 2, 2010

I'd like to compile a generic kernel for my netbook on my desktop. They are both F12 64bit. On my desktop can I do:

make xconfig
make
make modules_install

Then copy the folder to my netbook then:

make install? Is there a better way? I don't really want to make .rpms.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved