Which hardware components tend to cause compatibility issues? And how do you select a generic option that might work with your hardware?
I don't currently have any problems but curious to find out if there is a sequence of steps.
My development target environment is intel corei5 architecture. I want to build my source for i5 architecture. I am paning to use gcc 4.5.1. In the gcc manual i found an option to select the cpu type(-mtune = cpu_type).There is no i5 processor in the cpu type options.If i use -mtune=generic, will it produce optimized code for i5 architecture or it will produce the code for generic x86_64 architecture?
View 2 Replies View RelatedI was installed linux mint in windows 7 using option "Install inside windows"... I got trouble with windows7 so i reinstalled it... but now there is no option to select OS at the start up... But i have the drive where i installed mint and all other files.. Is there any way to get it back.. Because i dont have time to reinstall mint...
View 1 Replies View Relatedi have script it is for installing a program when I run it on terminal an old type GUI with a scroll bar and options appears. I can go from option to option but the first one is default selected and I can not select any other one it is something like that:[*] option 1
[] option 2
[] option 3
I can go over option 2,3,.. but the first one is default selected [*] with the asterisk. How can I move asterisk to any other option? when i go over another option and hit enter it is executing the default one.
I installed Ubuntu 10.10 desktop edition. I followed the instructions for installation available on "ubuntu.com". After installation at restart I didn't get window to select operation system. It restarted with already available Windows SP3 OS. The drive on which i installed ubuntu is not shown on windows.
View 1 Replies View RelatedI want to recompile apache so I can select a different MPM compile time option. I have looked in the graphical application manager, but I don't see a development version of apache like you do for many of the packages. Am I not looking in the right place for the source code for the Apache 2.2.17 available with FC14?
Alternatively, I can download the source from apache.org for 2.2.17. However, the install options default to a host of different directories than the FC14 version does. Being somewhat OCD I hate to mess up my FC14 system by installing to a bunch of anomalous directories, and I don't want to break anything. I can change the default install directories, if I knew what the FC14 apache 2.2.17 was compiled with. There is an httpd-devel-2.2.17-1 package. But the description makes it sound like it is for developing additional modules. I want to recompile the main httpd-2.2.17-1 package. Does anyone know if this is a possibility?
I'm about to install a version of Ubuntu onto a 32GB flash drive, I've downloaded are Universal USB installer that will do most of the work for me, however, it asks
Step 4: Select a persistence option for your USB
and the options are
1GB CASPER -RW
2GB CASPER -RW
3GB CASPER -RW
4GB CASPER -RW
What is persistence? am I better off having more (ie 4GB) since my flash drive is a 32GB drive?
I'm trying to install Ubuntu 8.04 on my pc but every time I select an option to install from the cd, the pc reboots and I go through the same thing again.
I've tried installing within windows but that just installs a folder with Ubuntu in but I can't start Ubuntu up when it's finished installing?
I just replaced F14 with F15 (clean install). Now, when I try to add my HP Deskjet 710 printer I'm not seeing any option to select the parallel port. I've tested the hardware with an old F10 live CD, and every thing's okay there. Does the parallel port still exist in F15, or has it been nuked?
View 2 Replies View RelatedIn order for TRIM to work on an SSD with encryption, I need to make sure to "select the AHCI option before installing the operating system."Does anybody know how to do this? I have no idea what this is talking about. I'll be installing 11.04 with no dual-boot. Just Ubuntu alone.
View 9 Replies View RelatedI have an arbiter which determines and manages a lab. I am wondering if it's possible to remotely control the grub boot selection. Right now I have to wait for the nodes to boot, check the hostname and then rsync the new grub configuration and reboot the node, it's VERY timely so I am wondering if there is an alternative to this method?
View 2 Replies View Relatedtrying out the new Opera 11 browser in Ubuntu, but when trying to use unite feature i am unable to install the components required for it to work.
View 1 Replies View RelatedI installed Ubuntu as a dual-boot system with Windows XP very carefully. Unfortunately, though given the option to boot Windows at the grub menu, when I select it, I get an error. Booting Ubuntu on my other partition works just fine, no issues.
I also attempted to access files from the first partition in Ubuntu using gparted, but once I mounted it, all of my files were not present. I only saw manufacturer files, and many files and folders I didn't recognize.
Also, as an aside, my laptop monitor is suffering from occasional black-outs during use. Ubuntu gave me a little toolbar flag, telling me to go to a website and use the patches given to fix it, but I'm not quite so sure where to input the given patch text. Do I really need to go through the trouble of finding the source code, etc., or is it more simple?
I know that there is a nice little launcher that will run the script for Grub to select a menu option upon shutdown for a reboot [URL]
I however would like to use this from Windows XP and have grub select menu item 2 during a reboot. Does anyone know if there is any way to set Grub commands from within Windows?
I've recently upgraded to 11.04.Till now, I could select an option to make the open folders on shutdown, to restore on startup.There was an option to restore running applications
View 5 Replies View RelatedI have been running Ubuntu 10.04 under Windows 7 (Is this call WUBI?) without any problems for a while. My other machines only run Ubuntu (9.04 & 10.04). I decided to give it a try to the latest Ubuntu 10.10. After going through the successful installation and then rebooting, I am getting the following error message once I select 'Ubuntu' in the boot up menu right after the BIOS screen: Booting ' Ubuntu 10.10, kernel 2.6.35-25-generic'
[Code]...
I'm running an Acer 1810Tz, dual boot with win7.Under 9.10 and Grub I had no boot issues, however I have just completed the upgrade to 10.04 and upgraded GRUB to GRUB2.Everything boots just fine into Ubuntu, and my GRUB menu looks right, but when I select the Windows 7 option, the machine just hangs with a black screen, white cursor top left. I'm sure this is a trivial problem, something overwritten that shouldn't have been perhaps, but I have no clue where to start.
View 6 Replies View RelatedI have to buy a new modem/router.I'm looking for the Netgear DG834g. Does it works fine with Linux?Do you think it is a good modem/router?
View 5 Replies View RelatedI am trying to figure out how to load the generic kernel in Grub2.
I have run the /usr/hare/mkinitrd/mkinitrd_command_generator.sh and ran the output:
Code:
Why this will not load.
I have bought a generic gamepad from China quite a while ago, which worked well on Windows XP (it's HID-compliant). However, after finally being able to switch back to OpenSuSE, I now find that I can't get it to work.
I am currently running OpenSuSE 11.3, with GNOME. I've used the "modprobe joydev" command, and if I run lsusb, I get the following:
Code:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID eb1a:2571 eMPIA Technology, Inc.
Bus 001 Device 005: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External)
Bus 001 Device 006: ID 0c0b:b136 Dura Micro, Inc. (Acomdata)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID e0ff:0002
Bus 002 Device 003: ID 06a3:8021 Saitek PLC Eclipse II Keyboard
Bus 002 Device 004: ID 0079:0006 DragonRise Inc. Generic USB Joystick
The last one is my gamepad, and it's apparently pretty well-known. I have also tried the "cat /dev/input/js1" trick, and it does indeed show garbage when I press buttons or move the analog sticks, so in fact it should be functioning properly. However, I can't get it work. In Tux Racer it simply doesn't recognize any joystick/gamepad, and Racer (the simulator) tells me that 0 joysticks have been found.
I have been searching for a solution for quite a while now, but all topics seem to be outdated (older OpenSuSE versions, listing commands that don't exist and are nowhere to be found...)
how to get this gamepad to work? Even if it means without the analog sticks, if it at least works a bit (I'll just do without the vibration, which is apparently very hard to get to work under Linux).
I'm trying to build a live cd, and would like to know what video drivers work with both ATI, and Nvdia.
My current live cd installs the nvdia drivers, but the system I'm using it on has an ATI card. I don't get it. I also can't figure out How I broke the run in safe graphics mode option, but it's no longer available.
I have problem with my laptop, the last week I update my kenel to 2.6.32-24-generic-pae and in this moment the wireless drive dosen't work.
View 1 Replies View Related" Mark the start of the text with "v", "V" or CTRL-V. The character under the cursor will be used as the start.""With CTRL-V (blockwise Visual mode) the highlighted text will be a rectanglebetween start position and the cursor."I can mark the start with "v" or "V".But it doesn't work when I push ctrl+V.
View 14 Replies View RelatedDid anyone have any luck getting dell v305 printer to work on linux ? do u guys know any generic drivers for it?
View 2 Replies View RelatedFor some time, I have been trying to install fedora 14 on my pc, as I want a dual boot machine. It has windows xp already installed and running. I used liveusb creator to make a bootable usb. the problem is, when I log in and start the installer, it runs until I get the option "Select storage device". When I select the appropriate option , basic storage device, the installer screen disappears, and nothing more happens. I shall be much obliged if someone can point out the problem. My computer is a Dell optiplex 745 , 2.8 GHz with 512 Mb of RAM.
View 5 Replies View RelatedI have a SONY PCG-R505TE laptop with an external CD/DVD, it connects via what I think is a PCMCIA card, the drive came with the laptop and functions fine. I currently have Windows XP running on this laptop, but it's very slow.I downloaded openSUSE-11.3-GNOME-LiveCD-i686.iso and sucessfully burned it to a CD.I have the laptop bios set to boot from CD, and it appears to be doing that no problem. When it boots I first see the welcome screen, then the openSUSE Installer, whether I select the Live (GNOME) option, or the Installation.. it loads the kernel, and then loads the KIWI boot systemit is on the third event, waiting for CD/DVD dvices to appear... that something seems to fail... I then see Failed to detect CD/DVD or USB drivethen a rebootexception and it reboots in 120 seconds.
View 2 Replies View Related15.4 inch laptops tend to be slightly cheaper than 14-inch laptops? Supply and demand? and if you do not mind answering another question, what's your perspective on uncle Larry eating Sun?
View 3 Replies View RelatedThe last Windows OS I use is XP to run work software. Now my father-in-law Paul, has asked me if I knew what's with the printer drivers on W7. I was surprised by not knowing, for everything else I use Ubuntu. So here's the question when trying to print Paul gets a popup that says he must right click and select "run as administrator" but when he right clicks the option isn't available. I'm going over there tonight so does anybody know what Microsoft has worked out to make their OS safe and what I should do about getting his printer printing?
View 1 Replies View RelatedI am sure that this is very simple but I have installed sound juicer and the gstreamer plug ins. The problem is i still cannot select MP3 as an output output option
View 3 Replies View RelatedI just got a question from a customer(actually from a customer to my manager then to me) and he is asking the following question: What are the components that were installed with RHEL? It may sound like a silly question but to me it sounds vague. The main thing I am thinking about now is during install you can select three components: webserver software development and virtualisation.
View 1 Replies View Related