I have some trouble booting the current KDE Live Cd (11.2) on my Laptop. I tried USB and CD both. The laptop hangs on the bios bootscreen and I cant select any further option like a boot device. No problem I have with an Ubuntu CD.
View 9 Replies
i started the installation programme and it went through a couple of options then says it has to restart the laptop when i restarted i got this message before the bios screen and then the computer does nothing
" Booting GRLDR.....
Turning on gate a 20 .... Success
Srating cmain() .... _"
I had to change disk order in bios and now I am unable to boot SUSE. My sda is now sdc(disk ID is still the same in fstab). Should I reinstall GRUB to MBR of hd0 or I will need to do something more.
View 2 Replies View RelatedI just installed OpenSUSE 11.4 on a completely blank machine, empty disks, etc. using a Network Install. The install appeared to run OK, but when it rebooted to do the configuration, it hung. I tried a manual reboot a couple of times, then booted in FailSafe mode - came up OK and ran through the auto-config. Now, it still boots up ok in FailSafe, but in normal mode I get the wallpaper on the screen, but it hangs there.
View 9 Replies View RelatedI have a problem where my PC will stop at the BIOS logo screen after a reboot. The keyboard and mouse don't get power ie no lights. I can power off / on and it will boot normally. The problem started after a fresh install and after installing the updates. ie before updates I could reboot and it was ok. I moved from Slackware and have Win7 and they don't have this problem. Also Ubuntu and Arch rebooted normally when I tried them. I have Opensuse 11.4 x64 on it's own HDD (Samsung F3) The system board is an Asus P8P67 Deluxe (Sandy Bridge) and the HDD is on a SATA3 port. Could it have something to do with the EFI BIOS? Would it be worth trying a newer kernel? it may better support my hardware. I'm hesitant as I don't want to break Lirc as it took awhile to get it working properly on the stock kernel.
Also where can I add '/etc/init.d/lirc restart' so I don't have to run it manually every time time I launch XBMC. I couldn't find 'rc.local'
So I Installed OpenSUSE A Plethora Of Times. In Both 32 & 64 bit. But No Matter What After It Boots Up And Where I Should See Some Kind Of User Interface The Screen Is Blank. Now this Is The Point Where You restart The Computer And See Where You Went Wrong But Come to find Out My Power And restart Buttons Dont Respond So i Have To Pull the Battery Out Of My Laptop.
View 4 Replies View RelatedI recently tried to upgrade my openSuSe 11.1 system using the instructions at:
SDB:System upgrade - openSUSE
I successfully got the system to 11.2, but the upgrade from 11.2->11.3 went awry. The installation froze during the update, and I had to start it over. The first issue I had to deal with was the fact that rpm had been upgraded and zypper hadn't, so zypper wouldn't function because older rpm files that it would search for had been deleted. After rolling back rpm to a previous version, I managed to complete the upgrade to 11.3 and everything looked good. However, when I rebooted the system, it hangs at a blank screen. More precisely, the system seems to get through all of the BIOS stuff and then hang while loading the OS (I assume). Although I've worked on Windows boxes for a long time, I'm a complete novice at OS installations/upgrades for Linux systems, so I'm not even quite sure where to begin to troubleshoot this. Ideally, I'd like to be able to fix the installation on the system to save the data on the hard drives, but I realize this might not be possible. My first thought was to use a recovery tool that I'd seen on some Linux installation CDs, but I see that for openSuSe 11.3 and on that utility has been dropped. I can, however, use the disk to get to the "Rescue" command prompt, so maybe there's something I can do from there?
New install on Compaq Presario F700 (F756NR)The install went fine. I was able to get the Nvidia drivers working too. The problem I have is when the system boots. I get the OpenSuse splash screen, and the system just hangs.I found that if I press <Esc> and hit <Enter> a few times, the system will eventually boot. I also found if I wiggle the mouse during the splash screen, the progress bar will begin to move, and the system will boot.Seems to be something about detecting hardware during the boot phase, and it seems to be input related.
My Computer
Folders, Harddisks, Removable Devices, System Information and more...
Disk Information
[code]....
I created bootable USB stick in Ubuntu the hard way in console. When I am booting and when my status bar is half full with white color I get white screen, where is the problem please?
View 9 Replies View RelatedI'm using OpenSUSE 11.2 64 bit. Sometimes boot fails and I get a black screen. It starts quite normal, but when it tries to start X and KDE, it fails and I only see a black screen. I can't switch to terminal and I can not reboot my computer by pressing "Ctrl + Alt + Del". It doesn't even shutdown by pressing the power-button. The only possibility is to switch off the computer. Then it normally starts.
The problem also occures with a clean installation of OpenSuse. And it cannot be solved by updating kernel, X-Server and KDE.
What files do you need? I'll post them.
The same computer worked fine with OpenSUSE 11.1. I think, the new radeon driver could be the problem, I have to use it because I can not use fglrx anymore as with 11.1
I take a look into my log-files, but I cannot see any error. Sometimes it seems, that /var/log/messages is partly overwritten by restarting the machine.
lspci:
Code:
Code:
I have installed openSuse 11.2 in vmware that is a virtual box on win7 ,last time when I logged in I tried to change some desktop effects. [COLOR="rgb(0, 0, 0)"]When I again started suse , up to login screen everything was working fine. but after logging in I am getting a COMPLETE WHITE SCREEN and everything gets stuck ...
[/COLOR]
I installed CentOS 5.5 last night using the DVD ISO (from a USB drive thanks to the Universal USB Installer). I selected the Server and Virtualization packages, and finished the install all the way through. At the end, the installer asked me to remove any installation media and reboot the system. After rebooting, the system hangs on a blank screen with a blinking cursor in the top left corner that does not accept text. This is before the GRUB screen appears. For partitioning, I created a 4GB swap partition on sdb and a 16GB ext3 partition on sda, mounted at /, with the remaining free space on sdb mounted at /storage.
Does anyone know why this system is hanging before the GRUB menu?
I've been searching the forums for any posts that cover my problem, but most of the booting problems I've found are different from mine.Anywho, the situation:ell laptop, 2 partitions, first is Windows XP, second is Ubuntu Karmic.Whenever I turn on my computer the first loading screen that shows up (is this the BIOS? Excuse my little knowledge of this stuff), before GRUB loads, is really slow. It takes about a minute to load.However, whenever I restart from my XP partition, it suddenly loads fast! And this does not happen when restarting from my Ubuntu partition or anything
View 7 Replies View RelatedI am in serious trouble apparently.
System boots up to loading NVIDIA drivers, it shows mouse pointer then it hangs up!
This happened after brutal force rebooting, because system did not responded properly (especially Nautilus). Probable cause:
forget to unmount.cifs a windows shared folder in the network (mounted with mount.cifs). It happened to me already sometimes (to forget umount.cifs), but never ending with this permaenent hanging up)
-tried automatic system repair with suse boot DVD. It repaired something + changed the bootloader. Problem still there
-rebooted--> system hanging up after NVIDIA drivers. code...
I'm having problems booting up my Fedora 14 system. I see the Fedora splash screen (the one with the egg-like logo that colorizes as it loads); the logo fills up completely and then everything hangs - all I see is the egg logo, and nothing else is ever displayed. I also can't get to any of the ttys via the CTRL-F1 sequences.
I can boot into single user mode just fine. The install scripts all run just fine. The system itself is actually up an running, so I suspect this is either something in the KDE startup, or after init processes all of the start up scripts.
I'm assuming this isn't a startup script problem, because I see a "started XXX" message for every service in the rc.5 directory - in other words, all the startup scripts ran from rc.5.
So, how do I find out what is hanging? I'm not seeing anything in /var/log/messages, and pstree didn't tell me much about what init was doing.
I used to be able to follow inittab to see all the things it did at boot, but since inittab was stripped of everything it used to do a few releases ago, I don't know what init is doing anymore.
I have installed many Linux distributions, but I have never tried openSUSE! So I thought it must be time to try it. I pop the dvd in(I checked the md5 of the iso and checked on the bootable disk) and when I go to install it pauses on the "Probe hard disks"Things I have done:
- Re-checking the integrity of the disk and iso.
- Tried booting with the safe kernel.
- Tried leaving it for ages
I have been trying and failing to install openSUSE 11.3 for the last couple of days to replace my Ubuntu install.
I have downloaded the openSUSE-11.3-GNOME-LiveCD-i686.iso (have downloaded numerous times in case it was a problem with the mirror I used) and done the standard dd stuff, as well as trying it from my windows partition with the ImageWriter app.
When I try and boot with the USB drive plugged in my system hangs at the boot screen and the usb drive starts flashing as if it is being read, this continues indefinitely and never goes beyond the boot screen and i eventually take the usb drive out and restart.
When plugging the drive in when Im in ubuntu it shows up as "openSUSE Live CD GNOME" and all the files seem to be there. In gparted it doesn't recognise the partitions or anything but I presume this is normal... Also reduces the size of my drive to the size of the Live CD but again I presume this is normal...
I have also tried installing using the NET iso however I have exactly the same outcome.
This laptop is a Acer Travelmate 8371 and has had Ubuntu, Mint, and Windows 7 all installed from the same USB drive. There is not optical drive so I have no other ways to install openSUSE.
I am running 11.3 for about 4 months and it suddenly started to hang intermittently, sometimes many times a day. Once KDE restarted and other times the screen went black. Most of the time it was just hanging and I needed to force a shutdown. The only clue I got is KDE displayed a notification saying "Disabling IRQ #24" not long after it started to go nuts.
After searching around, I figured the problem was with my external video card so I pulled it out 2 days ago and so far it didn't freeze again. After searching around some more, I found many users fixed very similar issues by upgrading to kernel 2.6.35 and I am ready to go for this solution. But now, I couldn't find out how to upgrade the kernel. People said it can be done in Yast but I only see version 2.6.34. What is the easiest way to upgrade?
i have hd encryption activated on my swap and home disks. now every 20 min or so (not really periodic but definetly reproduceable) my system hangs completely for about 4 - 10 sec while the hd led is on. i have a dual core cpu which makes this even more odd. could this be a side effect of hd encryption especially on the swap partition?
View 3 Replies View RelatedNew Intel x64 system installed with Opensuse 11.1 (like the KDE 3.5 option) and has been running well until today. Booting stops at "starting jexec services". Even while booting under "failsafe" system halts at "starting jexec services". Unable to boot to command prompt to attempt repair. Ran "repair" option from install disc with no good results. Still will not boot past jexec services.
View 2 Replies View RelatedEvery time I boot up OpenSUSE 11.3 it hangs at the same "position" for approximately 3 minutes and then continues to boot. Unfortunately I see no corresponding error log e.g. in dmesg output. Hence, I don't know what is the reason for that. Here is my dmesg output. The delay occurs at 20 seconds after beginning of boot process (line 1085). I also analyzed the boot process with bootchart.
My computer: Notebook Lenovo ThinkPad R400.
By trying to install opensuse 11.4 / 1 the installation hungsup at a late level. After rebooting the system, the configuration goes on. When finishing the installation on that way, there are no menus so you can to simply nothing. The problem of system hanging exists also with version 11.3 final release but after rebooting the configuration goes on and when finished, you have the menus.
View 1 Replies View RelatedI have been running Ubuntu 10.04 under Windows 7 (Is this call WUBI?) without any problems for a while. My other machines only run Ubuntu (9.04 & 10.04). I decided to give it a try to the latest Ubuntu 10.10. After going through the successful installation and then rebooting, I am getting the following error message once I select 'Ubuntu' in the boot up menu right after the BIOS screen: Booting ' Ubuntu 10.10, kernel 2.6.35-25-generic'
[Code]...
I had some issues with my system hanging on the automatic configuration of the install so I searched the web for the issue. After reading this thread: Hangs at end of SuSe 11 install I used acpi=off apm=off nolapci as the install options and it worked. My question is, do I need to add those options to the /grub/menu.lst or will the install do that?
View 9 Replies View RelatedWhat is the best method for debugging the booting process? Is there a cheatcode (tried debug and failsafe). Slackware 13.1 with standard linux kernel 2.6.35.8. I having a problem with a dell server 2860 booting my build. It is hanging on
[Code]....
Booting my previous kernel 2.6.27.27(different disk with different initrd.gz) it loads the same as above but continues with
Code: loading iSCSI transport class v2.0-870 iscsi registered transport tcp I'm stumped it the problem is with the ata_piix module or the iSCSI transport module or some firmware I might be missing. I booted other pcs without issue.
I'm using opensuse 11.1,syetm specification is following
CPU entium 4 2.93GHz
motherboard:asus
Hardisk:40 gb maxtor
Ram:1 GB
my system getting hang periodically after some time and the kernal showing the following error message
[Code]...
I had my motherboard fail and had to do a replacement. The motherboard I got has a feature (I don't think I can shut off) that lets you select what drive you want to boot off of. I have XP installed on the first drive and openSUSE 11.1 on the second drive. I am running openSUSE 11.2 with KDE 3.5 and I simply dropped my drives onto this new motherboard. I can boot up (Linux) just fine but am having other issues with my mouse. I am thinking of Updating to openSUSE 11.2 and the current KDE version.
Should I just update to 11.2 or do a new install. I have LOTS of data in my home directory I really don't want to lose and have a partition for data as well that is pretty full. I don't want to lose this stuff. What should I do about Grub with this BIOS that lets you pick which drive to boot off of? Put Grub in the MBR of the drive with openSUSE on it and nuke the MBR of the XP drive?
i am trying to let my BIOS boot up from a CD afther installing openSUSE. so i went to my bios and configured it to boot to cd first then hdd, but it went to my hdd first. no cd..
i am trying to install another OS from cd..
I have installed openSUSE-11.3and notice the following line in boot.msg:
WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 512MB of RAM.
AMI BIOS shows 6043MB usable RAM
--- excerpt boot.msg ---
<6>[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<7>[ 0.000000] e820 update range: 00000000ddc00000 - 0000000100000000 (usable) ==> (reserved)
[Code].....
I am trying to install Ubuntu 9.10 on a laptop. The laptop does not have working cd-rom or an operating system installed. I was hoping to install via USB cd-rom. The bios is an old one and will not allow booting from USB. Does anyone know of a way for me to install?
View 2 Replies View Related
