Ubuntu Installation :: Can't Boot Default Kernel After Upgrading From 9.xx To 10.04 Lucid Lynx
Jul 21, 2010
after upgrading to lucid lynx ubuntu doesn't boot with the new kernels 2.6.32-22-generic and 2.6.32-23-generic (also in recovery mode). But it's does boot with the previous 2.6.31-21-generic kernel. At the time i was hoping to wait it out, but a new kernel has come and the problem persisted. I've been trying to find a solution for this but somehow, amid lots of failed boot blank black screen threads, i didn't relate to any solution. The boot seems to go well until a pixelated logo appears (before the login screen), then goes to a blank black screen and there it stays stuck with no remedy. Looking into dmesg logs - albeit some differences between 2.6.31-21 and the newer 2.6.32-23 - the failed boot seems proper in both logs. In Xorg logs the differences are bigger but i cannot pinpoint a source for this problem.
View 2 Replies
ADVERTISEMENT
May 14, 2010
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left I see the following error message: "Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround
View 4 Replies
View Related
Nov 28, 2010
I got an error during the upgrade but chose to let the upgrade complete. Now my Firefox won't lauch. I tried uninstalling and reinstalling it from the Terminal and got the following:Quote:
rick@Desktop:~$ sudo apt-get install firefox
[sudo] password for rick:
Reading package lists... Done
[code]...
View 1 Replies
View Related
Apr 30, 2010
Both in 32 and 64 bit I cannot boot kernel-rt. Message displayed: mounting none on /dev failed: no such device. Then get login message in text console, gdm cannot start.
View 1 Replies
View Related
Mar 23, 2011
Can I upgrade lucid lynx kernel from 2.6.32 to 2.6.38? If so, how do I do it from command line?
View 8 Replies
View Related
Apr 6, 2010
I have just upgraded my OS from ubuntu 9.10 to 10.04.Now I'm facing problem of not having write permissions to USB drives (Pen drives).I have to use terminal with sudo to copy , move files and unmount media.
View 4 Replies
View Related
Apr 27, 2010
I've got a machine that I'd got 9.10 on, that I've now upgraded to Lucid Lynx - and I'm having the same problem with dual boot (or lack thereof) that I was having previously.
Rough scenario is:
(Original Vista machine had)
C: Windows Vista OS + Windows software, etc.: 500GB - single NTFS partition - SATA drive
D: General dumping ground for data. 500GB SATA drive. Was single NTFS partition, now shrunk to install Ubuntu.
So is now:
- NTFS partition (containing general rubbish)
- Ubuntu / partition
- Ubuntu swap partition
... and then 3 x 1TB SATA drives making up an (Intel ICH9R) FakeRaid RAID5 array - that Windows can happily 'see' and use, but I don't care about Ubuntu having access to it or even seeing it.
Lucid Lynx is installed to /dev/sde6 (IIRC) - but when I boot the machine just boots straight into Vista.
I've done what I can to try and get GRUB correctly installed - to the point that right now I probably have it splattered just about anywhere and everywhere.
So - now - the machine boots and simply presents me with "GRUB Hard Disk Error" and stops...
I can fix this by running the Vista repair, with a fixmbr etc. and putting the MBR back to 'normal' on the first boot disk (/dev/sdd in this case). The machine then just boots straight into Vista.
...or I can boot into Ubuntu (or Vista) by booting off a Super Grub Disk (CD) and selecting "Boot Linux" (or whatever it is) - and it correctly boots Lucid Lynx from /dev/sde6
Ideally I want a proper GRUB dual boot menu - but I just seem to be getting into more and more of a mess!
Bootlog below will show what sort of mess I'm in:
Code:
Boot Info Summary:
View 2 Replies
View Related
Jul 14, 2010
I am running Lucid Lynx kernel 2.6.32.24. Soon after the latest kernel update I noticed that Virtualbox would not launch when I clicked on the icon. I have searched the Internet for days, tried numerous possible fixes, over hours of effort, but can't get it working at all. Ubuntu Lucid runs great!! There are no errors just a few blinks of the hard drive indicator and nothing. Is there anyone out there that has seen this same issue?
View 9 Replies
View Related
May 18, 2010
I am trying to install Lucid on my Laptop but can't get the live cd to boot correctly. At the moment, it's giving me a purple screen with a white logo at the bottom, then a black screen with the underscore character blinking, and then nothing. (I have an HP tm2, with a USB DVD/CD drive. 64bit intel core 2 duo. I am using the Ubuntu 10.04 Desktop AMD64 .iso. I also tried the i386 .iso)
View 1 Replies
View Related
May 9, 2010
Is there someone from Dallas, Texas, USA area? I've got a friend there with lucid lynx on a netbook - and she says something's gone wrong with it - she cannot boot. Maybe someone could maybe somehow meet with her and see if there is a possibility to fix it? As i don't really know what's wrong but I am on another end of the world and have no chance to figure it out.
View 2 Replies
View Related
May 21, 2010
I recently installed ubuntu 10.04 lts. Whenever i boot ,it hangs the moment i log in. I had the same problem with 9.10 as well.
View 1 Replies
View Related
Feb 23, 2011
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left, I see the following error message:
"Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround.
View 9 Replies
View Related
May 6, 2010
I just downloaded the Lucid Lynx 10.04 LTS Install CD for the desktop. I am concerned that I have downloaded the wrong ISO or that the CD that I burned is not behaving properly. Unlike all of the other Ubuntu "Live CDs", this one doesn't offer you a choice of what Ubuntu does at Boot-up. There's no menu that asks what you'd like to do. This CD doesn't give you choices like:
- Test Drive Ubuntu without making any changes to your computer
- Install Ubuntu
- Test CD for Errors
- Test Memory
- Boot from Hard Disk
Instead, this CD just boots right to a Gnome desktop. Normally this wouldn't be a problem, but it turns out the the CD is performing some actions behind my back that I don't like. All that I wanted to do was to check the CD for errors to make sure that it burned properly. I didn't want it installing on the system where I was doing the burning. Instead of giving me options at boot, the CD automatically loaded Gnome, and then proceeded to mount all of the drives on my system, and then attempted to establish connection to IP address 91.189.90.132. I didn't like that. Luckily my firewall is secure enough that it stopped this unauthorized outbound data traffic dead in its tracks. I used reverse DNS to look up the owner if IP address 91.189.90.132. Here's what I found:
Code:
http://whois.domaintools.com/91.189.90.132
IP Information for 91.189.90.132
[code]....
Is this a Live CD, where you have some options about what to do at boot-up, or is this only an install CD? This information isn't clearly spelled out on the download page. this LiveCD taking control of my computer, mounting my drives, and then establishing contact with Canonical Ltd., without even giving me a menu option before doing so.
View 1 Replies
View Related
May 22, 2010
I installed bootchart and uploaded an image of my latest boot on imageshack: [URL] but I do not know really how to interpret it. Bare in mind that I did not use to have this problem while running Karmic...back then the OS started twice as faster as it does now after the update (now it takes at least 75 seconds to boot) .
View 9 Replies
View Related
Sep 17, 2010
Problem occurred after attempting to update firefox and configure evolution. Attempted to update firefox last night, it froze, attempted to open the system monitor to end the unresponsive process, and got a message saying the system was unable to support a new process because it couldn't fork. Did a forced reset, and the following now happens upon starting up. After selecting ubuntu (as it's a dual boot system with Windows XP) at the grub loader, blank screen, to this:
Code:
mount: mounting dev/disk/by-uuid/5b24d4b5-9b8d-4608-9387-0d92756dcdd8 on root
failed: invalid argument
mount: mounting /dev on /root/dev failed: no such file or directory
[code]....
It will not run recovery mode, and I have no bloody what it means by init=bootarg.
EDIT: Nevermind- I'm going to try the methods listed in [URL], and hope the gods of fsck smile upon my lowly hard drive.
View 1 Replies
View Related
Jan 25, 2011
been using meerkat in VM and there are some nice touches in there so was thinking of upgrading my lynx to meerkat, didnt wanna do fresh install cos meerkat has some stuff removed from what i see that lynx didnt BUT big worry is by doing upgrade not fresh I will end up with somoething completely sha**ed and wont work at all.
View 1 Replies
View Related
Oct 7, 2010
I'd like to install the 2.6.35 kernel while keeping Lucid (just not in the mood right now to get used to a new release). Can someone point me to a tutorial on how to go about this?
View 3 Replies
View Related
Jul 6, 2010
After a lot of updates yesterday I have found that Lucid will no longer boot, I just get a blank screen that has a cursor flashing in the top left corner. I can't boot into recovery mode to see what the issue(s) might be because I took that option out when I ran update-grub.My question is this, is there a way to run update-grub -either from a live-cd or grub-rescue mode- that would put the recovery boot option back in? I have already edited the /etc/default/grub file to comment out the field.
View 3 Replies
View Related
Aug 28, 2010
how to change (rename, delete) lines from boot list in grub 2, Ubuntu 10.04? For example, when I boot my pc, I have a boot list with options "Ubuntu 10.04", "memtest" and "Windows 7". I want to delete "memtest" line, as I don't need it, and rename "Windows 7" line to, for example, "Windows 117". How can I do that? Where I should look and edit? In old grub it was enough to edit /boot/grub/menu.lst, but in Ubuntu 10.04 there is no such file and other grub2-related files (like grub.cfg) do not contain this info to rename or delete lines. So, I can't figure out what to do.
View 3 Replies
View Related
May 27, 2010
This occurs ocassionally So i cannot even use the system. The default kernel is panicking and also the new kernel that i installed after the update. now the problem still exists and it is rendering my system unusable. i have put it in ubuntu forums. may be lucid is not supporting older hardware. mine is Athlon xp 1.8ghz ASUS a8NE mb 2GB raM. 82 GB HDD. earlier versions of ubuntu 9.04 was stable and i had the kernel panicking problem in it after i updated the kernel. As the problem remains a problem. I am not at all satisfied with lucid lynx it is unstable. cannot install updates in the update manager. Firefox vanishes while browsing the web.Then i have to restart it. shall i quit ubuntu or go for other Linux distros.
View 4 Replies
View Related
Apr 30, 2010
I have tried out Lucid Lynx Beta 1 back in march. During the installation I was announced that support for bluetooth was dropped. I installed anyway, thinking it would be back in the Final Release. Meanwhile (between March and April) I reinstalled Karmic because I really needed the bluetooth. I can see in the upgrade that bluetooth still isn't available. What should I do about this? Is there a way to keep Lucid Lynx and bluetooth? Or will I have to stay on Karmic until the end of times?
View 5 Replies
View Related
May 1, 2010
While leaving my laptop to install the upgrades, I hadn't noticed how the power cord had slipped loose. When I came back my computer must have shut off due to battery loss. When I booted up my computer again, I couldn't boot up Ubuntu under any of the kernels, -20,-19, etc. I get cryptic messages such as "unable to enumerate USB device on port 2," device not accepting messages," and "device descriptor read." i definitely intend to recover my data. I had been upgrading from 9.10 to the latest version of lucid lynx.
View 6 Replies
View Related
May 23, 2010
Decided to try out Ubuntu instead of automatically getting the next Windows OS.
I have a Dell Dimension E310 with on board video card (will be relevant soon, I think).
After trying making my own CD and not being able to at least run the LiveCD (thought it was my fault even thought the MD5 #'s matched correctly), I went to Shipit and got a CD delivered of Ubuntu 10.04 (Lucid). When I put the CD into my computer while running windows, the CD is not recognized, which seems strange to me. When I put the same CD into my work laptop (note that both computers are running XP), I can see the contents of the CD. Decide that it might not be an issue and restart the computer in the hope of booting from the CD. CD is never recognized and looking at the bootmenu, it has USB-cdRom at the top of the list.
More information: CPU is an Intel Pentium 4, 3.2Ghz. I don't believe it is a 64bit computer but I can't verify that. I mention this because I believe the CD I got is the 32bit version and that it should be sufficient but I figured I'd throw it out there in case someone else knew something.
View 2 Replies
View Related
Aug 30, 2010
I want to install Ubuntu Server distro. First i downloaded ubuntu-10.04.1-server-amd64.iso and "burned" it to my usb-pen using UltraIso software for windows. That booted from the usb, but just after punshing in the language etc it complains that it cant find the cdrom or something like that. then i try the [url], but that wont boot at all with this same iso mentioned above. and burn it to a darn CD. it boots, but somewhere during the process it stops and asks for the same cd that is actually in the drive already. there is a thread about this here: [url] I then wanted to find an easy iso that i could throw on my usb-pen and install the whole thing through ftp like i did in the old days with floppies. but man, i got lost in the documentation with no clear path on how to do it.
View 1 Replies
View Related
Oct 26, 2010
I am using Ubuntu Lucid Lynx 10.04 (64 bits) in my Asus U30JC laptop (Core i3 M350, intel 4500MHD + nvidia 310M with nvidia Optimus, 4GB RAM). I am content with Lucid and I don't want to upgrade to 10.10 for now. However I read that the new 2.6.36 kernel has some good improvements, such as improving system interactivity while intensive I/O (such as copying large files), and improved energy management for i3/i5 processors (which I hope translates into more battery time, which is a problem of Ubuntu vs Win7 in my laptop).
I discovered I had 2 options: compile the kernel myself, or use the Ubuntu Kernel PPA (maintained by the Ubuntu Kernel Team). I decided to use the PPA, so I added it to my software sources and installed the generic"linux-lts-backport-natty" kernel (2.6.36-1).
Package installation went fine, and after reboot, I could log in to the desktop no problem. Everything seemed fine, but after a few minutes, the system freezes completely: mouse did not move, none of the indicators moved, even Ctrl + Alt + F1 did not work.Where is the log file where there might be a message related to the freeze? Do you think that the kernel developers would try to fix a bug that probably only affects people running the 2.6.36-1 kernel on a distribution that was not built around it?
View 1 Replies
View Related
May 11, 2010
After my 8.04 debacle here:I basically gave up on trying to write an install guide for Hardy and Amanda. Others had done it better and with how muddled I was by the end of getting a working server, I wasn't sure I could repeat it.Now in Lucid, I've managed to get another working amanda server going, I'm fairly sure I can repeat it and but I question:Installation with 'apt-get install amanda-server' uses the user backup in the group backup.Installation of the ZWC client uses the user amandabackup. while thankfully ZWC has included reg keys:
HKEY_LOCAL_MACHINESOFTWAREmandaWC1.0Install BackupUserHKEY_LOCAL_MACHINESOFTWAREmandaWC1.0Install RecoveryUserto change the user on the client, this is messy, requires regedit (which normally is locked out by group policy), editing the service in service.msc and creation of a new user account named backup in addition to the installer's default on each client.The actual question is:1) Is there a reason for the use of backup:backup? (rather than amandabackup:disk or amandabackup:backup)
2) Is there any sort of flag that could be set, script to change the user within the repo atinstall time.Or generally an easier way of doing this than compiling each time I do an install.
View 1 Replies
View Related
Aug 20, 2010
I'm trying to add PPAs in my Kubuntu Lucid Lynx installation.
Code:
$ sudo add-apt-repository ppa:kubuntu-ppa/ppa
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv
[code]....
But when I look in my sources.list, the PPA repository is not there. Nevertheless I SUSPECT I'm receiving it's updates.Is there a file that PPAs are being written to other than sources.list?Should I manually update sources.list in order to add this PPAs?
View 7 Replies
View Related
Aug 7, 2011
I installed lucid lynx over a year ago on a IBM A20m laptop. I've been happily using ubuntu up to now until yesterday when I installed Tor and Torbutton. When I rebooted, I got a blank screen after the IBM startup routine. Thinking that somehow the system got corrupted by my Tor installation, I decided to reinstall lucid lynx from the CD. Surprise! The install CD also gives a blank screen!
I hit a key to get the menu and and the three first three choices all result in the same blank screen:
* Try Ubuntu without installing
* Install Ubuntu
* Check disk for defects
To help debug this, I tried setting the F6 option nomodeset and I removed "quiet splash" from the boot options.
View 1 Replies
View Related
May 9, 2010
I installed Lucid Lynx this morning but received this error message after the restart. "An error occurred while mounting usbfs. Press S to skip mounting or M for manual reboot"
View 2 Replies
View Related
May 28, 2010
I was using the 9.10 version of Ubuntu, and everything was ok. So I decided to update to 10.04, by update manager, and it not works pretty well. So I decided to reinstall my ubuntu. In my PC I also have a instalation of Windows XP, my father and sister uses it. The installation went well, no problems, Lucid Lynx is working fine. But in the grub screen, if you choose Win XP, the CPU starts to whisthle continuously, and the only thing you can do is restart.
I have been reading about it, but do not find the exactly same problem. I have posted a thread in a portuguese forum (im from Brasil) and have no good responses. Sorry about the bad English, I dont have to much experience writing.
View 2 Replies
View Related