Yast completely overwrites my very customized /boot/grub/menu.lst. I wrote a Perl script to restore the customizations from the previous version (retained in CVS) but this is more than a little annoying. At least Ubuntu asks. How do I stop this idiocy when upgrading the kernel.
View 8 RepliesAs I have 15 repo's enabled in Yast it a bit tedious changing them in the package manager, is there an easier way to bulk change them? Something like doing a kfilereplace on the /etc/zypp/repos.d/ folder and changing all occurances of 11.3 to 11.4 (in all *repo, which are all the files in the folder). Will this work?
View 9 Replies View RelatedAfter a fresh install of openSUSE-11.2 (yes, still 11.2) I noticed that the -desktop flavour of kernel is in use. All types of kernels are installed. Is there any easy way to change the kernel in use with yast? I would prefer -pae to get full use of RAM.
View 8 Replies View RelatedI had an old Windows disk I wanted to see if I could get some files off of. I was a Windows XP installation, but it got a virus of some sort and eventually died completely. I had always wanted to try to get my files off of it so I could wipe it and use it as another drive. Well, I plugged it up in my computer and thought that it would just recognize it as a regular data disk, but instead somehow it got automatically set as the boot drive. The computer went from the BIOS splash screen to blank and back a couple times before booting Windows. I then tried resetting the other drive as the boot drive and also unplugging the Windows disk with the same result: an MBR error screen.
I fixed the issue by reinstalling the MBR with the repair tools in the openSUSE disk but I am really curious if anyone knows why this happened. Is it a Windows issue or a motherboard issue or perhaps something else?. My old computer was about 7 years old but this new one is well, brand new. So I haven't had much experience with newer motherboards but I know they have come out with a lot of new features so for all I know they may have something that can detect a Windows install and rewrite the MBR or something. I also wouldn't put it past MS to influence($) MB makers to include such a feature.
The one problem I have now is that the boot options no longer display the kernel version, and the splash screen with the progress bar no longer shows, just the standard text.
After successfully upgrading to Gnome 3 can't find yast
View 9 Replies View RelatedWhenever I launc YaST software manager it keeps telling me my disk is full.
It's quite right, it's just that the disk in question is a mounted openSUSE CD iso which is 100% full - as it should be.
Is there any way of stopping YaST doing this - I'd like to be able to tell YaST which fs to ignore but a even a full stop would be better than a warning every time.
I see no keyboard menu under Yast. Dont know what caused it, fresh opensuse 11.2 install.
View 6 Replies View RelatedAfter a fresh install of opensuse 11.3 and a xen-hypervisor and tools (all default install, nothing special) just get a black screen when I try to use kernel-xen. Default kernel runs like a charm. Xen-kernel gives me a black screen just after grub menu.
This is my menu.lst about it:
###Don't change this comment - YaST2 identifier: Original name: xen###
title Xen -- openSUSE 11.3 - 2.6.34-12
root (hd0,2)
[code]...
I have no nvidia card...
Is there any way to upgrade the kernel from downloaded source code, using yast or zipper (by custom installation repository or something like that)?
View 9 Replies View RelatedI have manually added an entry for Ubuntu in my grub menu, using Yast. But every time the kernel is updated, this entry disappears. On the other hand, the one for Windows, that was added during OpenSuse's installation, is still there. So how can I keep this entry for Ubuntu ?
Edit : when I save the menu configuration in Yast, I get the following message :
Code:
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
kbuildsycoca4 running...
[Code]...
I have been using YaST to install software. It has been working probably. But yesterday when I want to use it again. I can goto that SUI (blue screen) but I just can't go into the software management. and then I try the other options. None of them can't be used.
View 9 Replies View RelatedFrom a fresh install of OpenSuse 11.2 64 bit the default is KDE. But if you want to install both KDE and Gnome on the same machine. I got to Yast --> Patterns --> And tick Gnome Desktop Environment and Gnome Base System.
That inturn pops up with a dependency issue. That states the following:
#### YaST2 conflicts list - generated 2010-02-24 13:18:37 ####
pattern:gnome-11.2-20.22.1.x86_64 requires patterns-openSUSE-gnome, but this requirement cannot be provided
uninstallable providers: patterns-openSUSE-gnome-11.3-1.1.1.i586[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.3-1.1.1.x86_64[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[openSUSE 11.2-0]
patterns-openSUSE-gnome-11.2-20.22.1.i586[repo-oss]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[repo-oss]
[ ] do not install pattern:gnome-11.2-20.22.1.x86_64
[ ] break gnome by ignoring some of its dependencies
[x] deinstallation of patterns-openSUSE-kde4_pure-11.3-1.1.1.x86_64
#### YaST2 conflicts list END ###
So my question is what exactly does removing and applying the Gnome pattern do. Because it seems to change alot more than just branding. It changes the default environment to GTK. How would go about reverting the pattern back to KDE after the install of all the correct Gnome Dependencies.
I can get the installation history via the command line:
Code:
rpm -qa --last | less
Is it not possible to get it from YaST in the same way as you can in Synaptic? It would not only be nice to see a basic list, but also what has been pulled in as dependencies and have it grouped by 'installation sets'. Too much to ask?
I don't know why this is happening, however, all of a sudden I am unable to install any packages (from OpenSUSE repos of course) using either Zypper from the CLI or YaST2. Every time I try and install anything, or perfom a zypper dup, I am greeted with the below error message.
Code:
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
I'm no stranger to OpenSUSE's package manager, however I have yet to come across this error before.
when in command line (because i cannot start plasma either) i get an error message stating [/usr/lib/YaST2/bin/y2base: symbol lookup error: /usr/lib64/libstdc++.so.6:undefined symbol: _ZNst_num_getIcSt19istreambuf_iteratorIcSt11char_traitsIcEEE2idE, version GLIBCXX_3.4] i would like to know how bad it is and if it can possibly can be fixed
View 9 Replies View RelatedAnyone know what happened to the nvidia repos and are they going to come back up?
Can't access it through yast, ftp, or a web browser.
The updates used to happen automatically in 11.4 but the last few weeks no updates at all even if I do it manually in yast still no updates is this normal?
View 9 Replies View RelatedI get the following error when YAST tries to install the latest updates----Subprocess failed. Error: RPM failed: error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found error: error(-30987) getting "" records from Requireversion index----could it be from removing KWALLET? Now I cannot re-install it due to this error.
View 9 Replies View RelatedIf you go to Vuze: The most powerful bittorrent client in the world. you'll see that you can download a tarball for linux. But, if you're like me, you'd rather get the RPG so you can use YaST to install it, allowing you to add vuze to your application launcher and desktop. After digging through google for the rare RPG files for the latest version of vuze.
Step 1: Download the swt libraries RPM here: ftp://ftp.pbone.net/mirror/packman.i...m.6.1.i586.rpm - ( original link found on this page )
Step 2: Download the Vuze RPM here: ftp://ftp.pbone.net/mirror/packman.i...1.1.noarch.rpm (original link found on this page)
The Vuze package needs the swt libraries pre-installed, so download that one first. In just two clicks, you'll have the latest version of Vuze installed by YaST on your system! BTW, this is my first post and first thread in these forums. I just installed SUSE on Tuesday and it's my first Linux OS I've tried.
Is it possible to configure Yast Software Manager module so that it does not completely exit when done installing a package? It get's annoying to search for a package and install it, the software manager exits, you then have to reopen it, install another etc. a few minutes later.
Seems this would be a config option, but if so I can't seem to find it.
I cannot open YaST nor 'install software' in the GUI. A new window is appears in the panel, but after 10 seconds or so it disappears. When in terminal, i can open YaST.
This happens from time to time and often after a while I can open it again in GUI (also when rebooting). It's very annoying when I want to install something and I cannot open Yast2 (I'm not familiar with terminal, so that's why i want to stay with GUI, which is KDE btw).
I have a problem when trying to update or install new application via Yast, I'm using opensuse 11.3. PackageKit Error repo-not-available: Failed to download /content from Index of /distribution/11.3/repo/oss
View 9 Replies View RelatedI have old laptop that I intend to give away to a child who's family, due to bad financial, has no means to afford it.
I'll quote Ken Starks: "A Child's Exposure to Technology Should Never Be Predicated On The Ability To Afford It"
I have installed openSUSE 11.2 with KDE (as this one works perfectly on that laptop), but I wish to put it in one of the languages (ordered by preference)
1. Serbian
2. Croatian
3. Bosnian
During and post installation there were neither of those languages available.
As I have had some problems using kpagager I've used file asociations to set yast as the default. When I download an rpm the yast icon bounces around for a while and then dies. I assume this means I need another set of yast launch instructions. Suppose I could download to a directory and set it as a repo but would rather just have it launch for rpms as it's quicker. 11.4 KDE 4.6.0
View 9 Replies View Relatedi had the problem that i couldn't surf access the internet while DNS and PING worked well. That i solved with ipv6.disable=1 at boot time. Now i can suf the internet with a browser but YAST is still unable to access the repositories which are accessible with a browser. Can someone please help me what the problem with YAST is?
View 9 Replies View RelatedWhen I am closing yast, from time to time I get this error. Although something segfaults the system seems to behave normally and I do not experience other issues it seams. The error comes up in a small separate window. Yast stays operative. Should I be worried about something? What is the system complaining about actually? Although this happens quite often, it does not happen always.
System is: 11.1 with Linux linux-xu0v 2.6.27.45-0.1-default #1 SMP 2010-02-22 16:49:47 +0100 x86_64 x86_64 x86_64 GNU/Linux and KDE 3.5.10 (r87) Yast: 2.17.69-0.1.1-x86_64
kdeinit4: preparing to launch /usr/lib64/libkdeinit4_klauncher.so
kdeinit4: preparing to launch /usr/lib64/libkdeinit4_kded4.so
kdeinit4: preparing to launch /usr/lib64/libkdeinit4_kbuildsycoca4.so
kbuildsycoca4 running.
[Code]...
I'm not talking about YaST auto-resolving dependencies for me or the auto-updater checking for patches... sometimes, when I start up the Software Management portion of YaST, there will be a package or two marked for installation. Today, for example, it wants ksshaskpass. This is 11.2 64-bit. (I know I'm bucking the trend of 11.3 questions, but I'm hoping you can overlook that.)
Is this behavior expected? I don't think I ever noticed it prior to 11.2.
To fix a Windows problem with hibernation, I had to let it overwrite my MBR. I can still boot into openSUSE 11.3 thanks to a wonderful piece of freeware called Plop Boot Manager, but the GRUB menu is no longer in my MBR (obviously).How can I force a rewrite of GRUB to the MBR from YaST?
View 9 Replies View RelatedI've got a weird problem since the update to 11.4: every time I use a yast module (the problem occurs with all of them), when I've finished (press OK or Cancel), it relaunch the module after the work is done. For example, launch the Package Manager, choice a package to install press OK : it performs the install and then relaunch the Package Manager. If you choose to quit, it will relaunch it... The only way to stop it to kill the process (or killx).The same problem occurs with the terminal version of yast. it's linked to a config file of yast under root or something so? I haven't found such problems reported on the internet.
View 9 Replies View RelatedThats my problem at the moment, i cant open YAST without using the command "xhost +" before on bash.
openSUSE 11.4 64 bits.