I am trying to use my Wiimote with ubuntu. I have followed the guide on here:[URL].. But I get this error when I run modprobe:
FATAL: Error inserting uinput (/lib/modules/2.6.32-22-generic/kernel/drivers/input/misc/uinput.ko): Operation not permitted
I have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing
ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper
I have this error:
FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted
I recently started having this odd behaviour while using and loading cpufrequtils on boot, I don't know if it is happening to someone else.During boot I'm getting( when /etc/init.d/cpufrequtils invokes /etc/init.d/loadcpufreq to load the proper module):
Loading cpufreq kernel modules...FATAL: Error inserting speedstep_centrino (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/speedstep-centrino.ko): No such device
FATAL: Error inserting pcc_cpufreq (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/pcc-cpufreq.ko): No such device
[code]....
Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.
When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.
I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
[Code]....
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
When trying to install my WiFi card's driver on Ubuntu 9.1, I run the make command and get the following error:make: *** /lib/modules/2.6.31-20-generic/build: No such file or directory
View 1 Replies View Relatedim trying to install the RTL8192CU_linux_v3.0.2164.20110715 drivers so my new wireless adapter works, but I have hit a wall when trying to insert the drivers after makeing them its telling me
"-VGN-NS325J:~/wifi/driver/8188$ insmod 8192cu.ko
insmod: error inserting '8192cu.ko': -1 Operation not permitted
0 down vote favorite
share [fb] share [tw]
This is the problem I run lspci -v which checks all drivers on my system and more. It says kernel driver in use is nouveau. Then under that it says kernel modules: nvidia recent, nvidia-96, nouveau, nvidiafb. So what it looks like I have 3-4 drivers for my video card loaded and one, nouveau, being used. I think they conflict with each other.
I'm trying to add drivers other then nouveau, because the mouse freezes with it. At this point I can't seem to get rid of nouveau, I go to terminal and type:
sudo apt-get --purge remove xserver-xorg-video-nouveau
And it says that it's not loaded so I can't dump it. lspci-v says nouveau is the driver being used and trying to dump it. It says it isn't installed. I'm confused. I want to dump nouveau, what should I do? I also go into Synaptic package manager and it isn't listed as being installed.
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
I have, for days, been trying to get a Fedora 15 server to send audio output to the system monitor, an ASUS VH242H, via HDMI. The video portion works perfectly, allowing me to appreciate GNOME 3 for the first time. Sound, on the other hand, is non-existent.
From many, many threads on this problem, I have at least been able to provide some info which might help resolve this. Unfortunately, I have now read too much and followed too many suggestions to be able to find my way through the morass. So, once again, I built a completely new system to ensure a clean start.
Note also that to simplify things, I disabled the on-board audio in BIOS so only Nvidia has any sound output capability. Initially, 'alsamixer -V all' identifies the card and the chip as being PulseAudio. That would change if I used the <F6> option but I have not done so to keep things 'clean' at this point. The 'Master' is full on (100<>100), so muting is not a problem. Next, I searched for the device from the output of /proc/asound/card0 which would match the monitor.
The one device associated with the monitor_name is eld#3.0:
monitor_present 1
eld_valid 1
monitor_name ASUS VH242H
[code]...
Both the kernel driver and the kernel modules are not what I think I should have. The kernel driver should be HDA NVidia for starters, no? Running modprobe -l and looking for nvidia returns:
'kernel/drivers /video/nvidia/nvidiafb.ko'and 'extra/nvidia/nvidia.ko' But I have not attempted anything beyond this point because I am just too confused as to what needs to be done and who or what manages these values effectively.
I updated the latest kernel and other new maintenance tonight and started getting this error at boot...doesn't appear to be hindering anything. My encrypted partitions (luks, ext4) still open and are accessible.
modprobe: FATAL: Error inserting padlock_sha (/lib/modules/2.6.29.5-191.fc11.i586/kernel/drivers/crypto/padlock-sha.ko): No such device
See similar errors reported on ubuntu forums... with various recommended workarounds... update/add an alias, blacklist a module, fresh install
insmod: error inserting 'kernel.ko': -1 Invalid parametersI am getting this error when i am try to insert kernel.ko into kernelMy systemfedora 12 with gcc 4.4.2insmod kernel.koinsmod: error inserting 'kernel.ko': -1 Invalid parametersmy program
__________________kernel.c________________________ ___________
#include <linux/module.h> /* Needed by all modules */
#include <linux/kernel.h> /* Needed for KERN_INFO */
[code].....
I'm on Ubuntu 10.10 - fresh install 2 days ago, I marked all packages for upgrade in Synaptic, everything upgraded except 'linux-image-2.6.35-22-generic' kernel image. Now everytime I use apt-get or synaptic it takes ages as it tries to update the kernel image every time. The error I am receiving is as follows:
[Code]....
I am trying to figure out how to load the generic kernel in Grub2.
I have run the /usr/hare/mkinitrd/mkinitrd_command_generator.sh and ran the output:
Code:
Why this will not load.
I am trying to install a Hauppauge 1850 video card into Linux Home automation system (LinuxMCE) which is based on Ubuntu Intrepid (I can't upgrade the kernel since this is what the LinuxMCE distribution supports)I am feeding analog signal to the video card, either through a coax analog connection or an RCA analog connection. I cannot see any picture from the card (I verified that the video card is working properly under a Windows Vista OS)I am trying to use the video card using a lightweight application such as tvtime, xawtv. In all applications I am failing to see an image. (For example, tvtime shows the message "No inputs avialble Cannot open capture device /dev/video0". Right clicking on Input configuration / Change video source doesn't give any options)
View 9 Replies View RelatedI'm trying to install some wireless drivers, but apparently I don't have a /lib/modules/<kernel>/build directory, which is causing the Makefile to throw an error. Is there a specific place I should point the Makefile at?
View 9 Replies View RelatedI'm struggling to get my wireless connection working. During an install of the compat-wireless-kmp-desktop driver a warning occurs:
WARNING: /lib/modules/2.6.31.12-0.1-desktopp/kernel/drivers/net/wireless/wl12xx/wl12xx.ko needs unknown symbol_ieee80211_rx
and
Symbolieee80211_beacon_get
What can I do next to get this to work? Running Opensuse 11.2 on Asus 1005PE.
I'm currently trying to setup Slackware 13.7 on a server, using software RAID 1. I'm using the README_RAID.TXT document at the root of the Slackware disc as a reference. Anyway, here's what I have so far.
/dev/md1 -> /boot partition
/dev/md2 -> swap partition
/dev/md3 -> / partition
Code:
[root@raymonde:~] # fdisk -l /dev/sd{a,b}
Disk /dev/sda: 41.1 GB, 41110142976 bytes
255 heads, 63 sectors/track, 4998 cylinders, total 80293248 sectors
Units = sectors of 1 * 512 = 512 bytes
[code]....
I created an initrd image using mkinitrd -F, added an according stanza to /etc/lilo.conf and ran 'lilo' after that. Now I can boot on the vanilla huge kernel all right. But I can't seem to boot on the generic kernel. Whenever I try to do this, the boot process stops short on the following error message:
Code:
mount: mounting /dev/md3 on /mnt failed: Device or resource busy
ERROR: no /sbin/init found on rootdev
I downloaded the x86 server version for Lucid twice today. Both times before burn the md5 match those published on the Ubuntu site. I am attempting to install the system on a Dell poweredge 2500. 2x 1.4 gb P4 procs, 1 gb ram, 750 GB HDD (raid) Boot to installer. it goes through the standard language checks, keyboard, checks for cdrom, then attempts to start copying files.
It gets to 17% copy on fs-core-modules-2.6.32.21-generic-di and hangs there for 5 minutes or so. Then comes back with the error that it could not get the file and asks if I want to retry. all retries lead back to this error. As I said, MD5 is exact, burner does not complain of a bad burn, and disk is closed at the end of the burn. so, has anyone else been able to install Lucid server x86? burned four disks today, one pair on two different burners. All fail at 17% retrieving that file.
I have installed Arch Linux quite a few weeks ago; but I'm still trying my best to install the nividia display driver for my graphics card (nVidia Geforce 2 MX 400). Not only in Arch but have tried installing on other distros and still failed. I have read up all the documentations and I still find it hard to do this task. When I used the terminal and executed the NVIDIA-Linux-x86-94.43.01-pkg1.run file without any window manager running, I get this problem:
ERROR: Unable to determine the version of the kernel sources located in '/lib/modules/2.6.35-ARCH/build'. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at nvidia.com.
Now I'm using Arch Linux Kernel 2.6.35 and I have got the source. But where am I suppose to put it now? I do not want to change the kernel. I just want the nVidia installer to identify that there is a kernel source so that it can install. I have searched up a lot on websites and ended up with no proper guide.
This is a very old driver. So since now I have the nVidia driver installation package and also the kernel source,
Trying to split a wavpack on Ubuntu 10.04. I tried: Code: cuebreakpoints Disk3.cue | shnsplit -o flac Disk3.wv It gives an error Code: shnsplit: warning: none of the builtin format modules handle input file: [Disk3.wv] shnsplit: error: cannot continue due to error(s) shown above I already have wavpack 4.60.1-1 installed. Any ideas why shnsplit complains about not seeing wavpack?
View 4 Replies View RelatedI opted to install my Linux Fedora distribution, in a SUN VM (Virtualbox). [URL] I have 2 questions:
My current max res available to select is 1024x768. Can I run at 1920x1200? My display indicated that it is 'Unknown'. I don't know if that is in on the deal, or not...
Second question: When installing VBOXADDITIONS_3.1.2_56127, I am getting the error: Building the VirtualBox Guest Additions kernel modules [FAILED]
If I am displaying the log correctly, it indicates: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop Pictures are located here, in the EVGA Linux forum: [URL] I am new to both Linux, and Fedora.
My mission statement: To run Linux using the Fedora distribution, in a VM window under Windows 7 64bit Ultimate, with the ability for scripting using Bash, with the Perl programming language installed, and use Apache Tomcat to monitor both apps, and various VM installs, on numerous Servers via the internet.
I install Debian on a Power book g3 and i need the right click function. I try mouseemu but it give me an error: open: No such file or directory No uinput device found! Make sure the uinput module is loaded or CONFIG_INPUT_UINPUT is compiled in kernel. if there are other way for the right click function?
View 3 Replies View Related"linux-backports-modules-nouveau-2.6.32-14-generic" is "stuck" on my laptop. It's a "Not Installed (residual config)" and when I try to I get "E:linux-backports-modules-nouveau-2.6.32-14-generic: subprocess installed post-removal script returned error exit status 1"
View 5 Replies View RelatedI am trying to install the Nvidia Quadro NVS 110 169.04 drivers but am having issues during install. Prior to attempting my install I did install the kernel-devel rpm so it can compile. after running the RPM I get. Quote: No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]?
which of course does not work. next it says Quote: "No precompiled kernel interface was found to match your kernel; this means that the installer will need to compile a new kernel interface.. i hit okay and move on to. Quote: Error: Unable to find the kernel sources tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat linux systems, for example be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. if you know the correct kernel source files are installed, you may specify the kernel source path with the "--kernel-source-path' command line option
I'm trying to install the 32bit 10.04 server to an atom machine from a CD burned with ubuntu-10.04-server-i386.iso. The installer is presenting me with the:"No kernel modules were found" ..error message. Is the atom cpu and chipsets supported by the 32bit server installer?
View 1 Replies View RelatedI'm trying to install Sun VirtualBox Additions into Fedora 12 which is installed in VirtualBox running on top of Windows 7. As the Fedora install was originally a live distro which was then installed to the HD, it may be missing some essential files for compiling.
My attempt to install the VBoxLinux additions is incomplete and I can't get the full range of video displays. The largest is This is the error message: "Your system does not seem to be set up to build kernel modules".
Should I update Fedora to install all the updates available? I did find one webpage which gave an accurate list of files to install for this purpose but can't find it now.
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
I'm trying to build a live cd, and would like to know what video drivers work with both ATI, and Nvdia.
My current live cd installs the nvdia drivers, but the system I'm using it on has an ATI card. I don't get it. I also can't figure out How I broke the run in safe graphics mode option, but it's no longer available.
