Ubuntu :: Slow Boot Time - Boot To Bios And Then The Screen Goes Black With A Blinking Cursor
Oct 14, 2010
I've got two laptops running Ubuntu. Both have had Lucid installed from the live cd. I have upgraded one of them to Maverick. Both distributions are running great after they boot up, but I haven't experienced any faster boot times with either distibution. Both boot to Bios and then the screen goes black with a blinking cursor in upper left corner of the screen. The black screen remains for 30 to 45 seconds and then I get the Ubuntu splash screen for maybe 5 seconds, and then desktop. Why am I not seeing faster boot times? I realize 45 to 60 seconds is good compared to other os's, but I anticipated much faster boot times. Shut down on the other hand is quite fast at maybe 5 to 10 seconds. Does anyone else get this black screen on boot? Seems like wasted time cause I can't tell what's going on during the time there is a black screen. This is not a real big deal breaker, as I don't reboot very often, but I just wonder why bootup isn't faster.
View 7 Replies
ADVERTISEMENT
May 3, 2010
I dual-boot Windows 7 and Ubuntu. Sometime between 4/18 and a few days ago, something happened with Windows booting up. Ubuntu boots fine, but whenever I try to boot Windows, it just goes to a black screen with a blinking cursor (the command line kind, not a pointer). At first I thought it was Windows, but I have run the repair CD and executed chkdsk /f and chkdsk /r on all partition related to windows. No effect.
I ran a system check designed for issues with booting up, and it found no errors. I have looked at my GRUB files, and they all look fine. I am not sure if it is GRUB or Windows. I tried reinstalling the Windows boot-loader, and it had the same effect, the only difference is that it bypassed GRUB. The reason I think it may be GRUB is that the error happened around the same time as me upgrading from Karmic to the Lucid RC. I have posted this on a Windows 7 forum.
View 9 Replies
View Related
Mar 8, 2011
I have a problem with booting from a USB flash drive. I have Acer TimelineX 3820TG. I have Windows 7 Home from Acer and I installed Mandriva OS from USB(from USB because this Acer doen't have a DVD drive). It was OK, but I want reinstall Windows 7 and so I did. Now I have Windows 7 Professional and it wrote over Mandriva's GRUB. It wasn't a big problem. For a while I was just using Windows 7 but now I am thinking that I need some OS with Linux and I am thinking about Ubuntu. But when I tried to boot from USB with Ubuntu I get a black screen with a blinking cursor after the BIOS POST.
I was trying many applications to create a bootable USB drive and many versions of Ubuntu (and other Linux distributions), but nothing worked. I tried to Google for answers but I found many problems where all booting goes to black screen but in my problem Windows 7 boots fine from disc but from USB doesn't work.
View 1 Replies
View Related
Aug 9, 2011
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
View 5 Replies
View Related
May 3, 2010
I am getting a much slower boot with the 10.04 upgrade. After choosing which partition to use I get the blinking white cursor in the upper left hand corner and the "Boot from (hd0,4) ext 3..." sits there for a while before coming to the log in screen. There have been quite a few posts about this, a lot of people are saying disabling the floppy drive in the BIOS has worked for them. I don't have a floppy drive on my laptop.
View 9 Replies
View Related
Nov 10, 2010
Just did a fresh Ubuntu 10.10 (minimal) install on my Asus EEE PC 1001PX.Before the minimal install I had Ubuntu Netbook Edition 10.10 which worked flawlessly, now all I get is a black screen with a blinking cursor:for the amazing quality, but I guess it's better than nothing.ctrl+alt+Fx does nothing, ctrl+alt+del reboots the computer.Booting with the usb-stick that was used for the install takes me to the login...
View 3 Replies
View Related
May 5, 2010
A few weeks ago I installed Ubuntu 10.4 beta on a pc. I upgraded it to 10.4 RC and 10.4 final release. I think it was after upgrading to 10.4RC that I started having a problem during startup. Here is what happens:
I turn the pc on the bootstrap process occurres, then the grub screen comes up I let ubuntu boot. For a few seconds I get a black screen with a blinking cursor. The Ubuntu splash screen flashes on the screen for maybe a second or two. Then I'm dumped to the command prompt on TTY1.
At this point I can log in with a username and password type startx and I'm at the ubuntu desktop. If I log off I'm back at the command prompt on TTY1. If I press alt-ctrl-F7 at the command prompt this is what I see, these are the last four lines of text: init: ureadahead-other main process (742) terminated with status 4
[Code]...
View 4 Replies
View Related
Oct 25, 2010
just did a dual boot install on a brand new DEll T1500. The machine has win7 on it. I booted off the live CD and all looked well. Installation went well. When I reboot, I get grub, select the top linux option and then see a small black blinking cursor for a few seconds, then nothing. The screen reports no signal.
View 8 Replies
View Related
Jul 11, 2011
I am using fedora 15 on my dell studio 1558 . Sometimes a black screen appears with a cursor blinking when i tries to reduce the brightness of the laptop and somethimes it automatically happens . And i am not able to do anything its just like the blue screen of death as in windows . the only way to get back is by restarting the computer
View 8 Replies
View Related
Jun 4, 2011
I built my computer and having trouble booting Ubuntu, here are my system specifications.
System Specifications:
CPU: AMD Athlon II X4 3.0GHz Quad-Core
GPU: ATI Radeon HD 5750 1GB 128-bit GDDR5
Motherboard: ASUS M4A88TD-V EVO/USB3
Memory: 4G G.SKILL Ripjaws DDR3 1600
PSU: Cooler Master GX Series 750w
HDD: 500GB Samsung 7200 RPM
I have Ubuntu on a DVD and have tried both my DVD drives, AND an external DVD drive and have no luck. I have tried different versions of Ubuntu and get the same problem. So I boot it fine and it gets the the Ubuntu splash screen and I select "Install Ubuntu" it loads for a few seconds then goes to a black screen with a blinking cursor in the top left corner. It sits here forever. I tested on my friends computer with very similar processor and it blinks for about 3 seconds then an Ubuntu splash screen appears with dots under it and it loads and works fine.
So I am 100% positive the DVD is fine and should work for my processor also. I do have Windows 7 currently installed. And I made a 100 GB partition via Windows 7 using Easeus Partition Manager. If it matters, I did test Ubuntu on my computer by installing it from VirtualBox and it worked fine...but I'd rather do a dualboot because I don't like running an OS in another OS and its performance isn't so great when emulating an Operating System...
View 9 Replies
View Related
Jul 9, 2010
I have here two old identical compaq pc's with 64mb ram.I want to copy drive/os from one machine to other. So i do a drive to drive clone (witn both hd's deing connected to another machine). And it says its done and okay. But the second (cloned) machine doesnt boot. And have the black screen with the blinking white cursor in top left corner. I have already tried to do fdisk /mbr and also copying partition table from original to destination disk. Because i think it is logical that with a drive to drive clone it sould be copied. But i have a doubt in that somehow. Because why would it not boot if it was copied then
View 9 Replies
View Related
Dec 8, 2010
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies
View Related
Jan 11, 2010
I am installing Fedora 12 on a VIA pico ITX and am running into some issues.
I had the same board but with an PATA/IDE drive, and on that it installed just fine. I needed a bigger/better drive so I did get an SATA drive for it.
After the install it either freezes/hangs when the post install begins or IF the post install works (when I use ide=nodma) it won't boot. I do get to see the grub screen (if I change the timeout in grub.conf) but as soon as the kernel starts loading it freezes. and I see a black screen with a prett fast blinking cursor.
With the live cd, if I try to boot: it reports, no root available going to sleep.
View 2 Replies
View Related
Jan 5, 2010
I have a problem - after installation of Ubuntu 9.10 I discovered that I do not have virtual terminals on my computer. When I am trying to switch, to another virtual terminal with, say, Ctr-Alt-F2, I am getting a black screen with lonely cursor blinking in the upper left corner (no login prompt).my tty2.conf file is
Code:
# tty2 - getty
#
# This service maintains a getty on tty2 from the point the system is
# started until it is shut down again.
start on runlevel [23]
stop on runlevel [!23]
[Code]...
View 8 Replies
View Related
Dec 16, 2010
I have an Acer Aspire One AOA110 that came with Windows XP.
I created a usb flash drive install for Ubuntu 10.10 netbook edition and went through the install process (wiped disk clean, not a dual boot with WINXP).
Before install, I was able to run Ubunut from the usb key with no problems.
At the end of the install, it told me I needed to restart, so I clicked the "restart" button and the removed the usb drive. Nothing happened and it never restarted and just completley hung for about 20 minutes. I manually shut down the computer by holding the power for 10 seconds and then rebooted the machine. Now all I get after the "acer bios" screen is a black screen with a blinking cursor. If I press any buttons, the computer beeps at me.
View 9 Replies
View Related
Feb 10, 2011
I have rebuild my system, with an Asus motherboard M4A88TD-V EVO/USB3 with radeon 4250 integrated 8 Gb memory
Athlon II 4x 640 2 x 1 TB sata3 WD Harddisks I installed 10.10 64bit, and ran through the whole install with the alternate CD without problems, Installed grub in the MBR on the 120 Gb partition for 10.10, it even recognised my 2 3ware pci raidcontroler on which 8.04 is installed.
When I start I get grub, when I choose for 10.10 I get a black screen with a cursor blinking in the left uppercorner. Luckily I can start into 8.04. I have no idea how to continu. for now I will burn a knoppix cd so I can read the ext4 partition with 10.10 and hope to find something to solve this.
View 6 Replies
View Related
Nov 28, 2008
I'm a fairly new linux user and I seem to have a problem with ubuntu 8.10 after installing it.To make sure everything was working fine before i could do a dual installation, i ran the live cd and it worked like a charm.Everything works fine in the live cd....the internet, sound, graphic drivers (even the special effects seemed to be work fine)I thought wow...after having a bitter experience with Ubuntu 8.04 and 7.10 (I couldnt install those at all coz of driver issues and stuff) I thought this is it!So I used the wubi installer to install ubuntu in my D drive (I didnt wanna use C just to be safe as the primary OS is installed there). Gave it a healthy space of 15 gb. Finished the installation and the rebooted.I went inside Ubuntu which started doing its installation and copying of files and stuff. So far so good.....
And then once it finished its installation and copying of files (100 %), the screen went blank and i see a cursor blinking. I thought maybe its restarting and thats why it must be doing this.I wait for nearly 10 mins and nothings happening except for the cursor blinking on the black screen. I press the caps lock key to see if anything is processing. Nope. So i manually shut it down and then load ubuntu.It loads like 20-30%....rests for a while....and then it loads a bit (not completley)....after that it takes me to a command line asking me for my password and username.I enter those correctly. But it doesnt get me into the main GUI screen yet.
It shows me a lot of the this error msg:
-bash: /dev/null:Permission denied
I'm still in command line (or terminal to be precise). So i use 'startx' (something which i learned from my csci labs ) to start a new session. It showed signs of starting a new session (i can see the mouse pointer and stuff) and then poof....back to the command line again.So I shut it down and load it again in recovery mode. It shows signs of the same symptoms in the splash screen (going very slow after 20-30 % ) and then this time, before i'm asked for my username and password in the command line, it shows a lot of warnings: fake daemon running (or something like that) and i cant even use startx!So i didnt know what to do, uninstalled ubuntu and did a fresh installation (wubi and in the same D drive). Reboot. Install and copy files 100% and then a blank screen again with the dreaded cursor blinking. I still wait for about 10 mins and nothing yet happens. So I manually shut it down (again) and then load ubuntu and unsurprisingly i have the same problem as what i described before....doesnt load properly and i'm not able to come out of the terminal.
View 2 Replies
View Related
Feb 5, 2010
I was going to set up an ubuntu server, but ran into some issues. When I try to install ubuntu server 9.10, it immediately goes to a black screen with a blinking cursor as soon as I press enter on the menu. I've tried pressing F6 and editing options - noapic, nolapic, irqpoll, vga=[something...] and nothing worked. I then downloaded a standard ubuntu desktop cd, and the livecd works, and I can successfully start the install!
I've heard that I should probably use the server install if I want to use this as a server (which I do; webserver for a group of people, website, ftp, ssh.) I've also heard that it's possible to just install everything needed overtop of an ubuntu desktop base. What should I do? Are there other things I should try to make the server install work? Or is it not worth the effort, and I should just go with a desktop install and then work from there? tasksel? (It's a Dell XPS, the graphics card is NVIDIA Geforce 9800 GT).
View 1 Replies
View Related
Jul 1, 2010
I am trying to boot up Linux Mint 7 after a packages upgrade and it boots up but then it shows this and stalls.And similar messages for GDM and then it just shows a black screen with a single blinking cursor on the middle left of the screen. I cannot do anything except press the CTR-ALT-DEL combination to re-boot, then it shows the usual shutting down messages and does the re-boot.I am running the 2.6.28-19 kernel and I have upgraded the Ubuntu packages on my Linux Mint 7 system from Jaunty to Karmic. Please help as I do not want to re-install. I am running Knoppix 6.3 ATM and I should be able to chroot from that if necessary. I am booting from /sda1 that has Linux Mint 8 installed and grub 1.97.
View 1 Replies
View Related
Apr 6, 2011
I installed a Raid 2+0 a couple of days ago with windows 7, and everything was working fine until today. I left my computer for a couple of hours and when i came back all i see is this black screen with a blinking cursor, then i tried everything on the bios but every time i tried to boot it kept stuck there, right after the bios POST.Then i tried changing the SATA ports, that was something that fixed similar problems on my old Mobo, but this is strange because this mobo has 1 week, and the HD's (2x seagate 500gb) have 2 days, so they should be fine.
Then i tried with my ubuntu lucid lynx live cd, it has saved my life many times, it always works flawlessly and i thought i could use it to restore the boot files, but i was very surprised when it failed as well, it pops a message saying something like "invalid user pwsuid "user: unknown"{0}". Tried it many times with no luck, only that same message...Now i managed to boot from a "slitaz" linux dist. thats about 30mb, it has many useful tools.I can see the partitions/HD's on the Gparted and mount applications, but i still i havent managed to mount the raid i had on my Windows 7 install, im a bit scared of losing data, and i dont even know how to do it.Is there any way to fix thisrom the slitaz live cd?Maybe i could mount the Raid and then restore the Boot files from the slitaz live cd? I have a windows image i could use on the Raid, and i could copy the image files to a partition, make it primary, active and bootable...I really dont know, maybe that wont help either because the ubuntu live cd couldnt boot, i really dont know what whats going on and what could be the cause of this... maybe a worm/virus
View 2 Replies
View Related
Nov 29, 2009
Although I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
View 2 Replies
View Related
Jun 24, 2010
Problem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
View 9 Replies
View Related
Oct 20, 2010
I have a box with lucid I rarely boot. When I do there is usually some trouble, as now. The only thing that happens is that a blinking cursor appear, and nothing happens. Usually the box also never shutdown, I end up with having to hardboot it.
What causes this, is there anything I can do to fix it? As of now I can't get the beast back up. I'm running x64, a cheap raedon 5xxx card and an amd x4 processor.
View 3 Replies
View Related
Mar 7, 2010
I just got an update notice two hours ago and after updating I rebooted my machine to find that it no longer boots. The update was for 23 bug fixes for Nvidia drivers and Nvidia support software. I get a black screen with the message "serial8250: too much work for irq17" and a blinking cursor. How do I recover from this?
View 14 Replies
View Related
Feb 10, 2011
I am attempting to install Ubuntu 64Bit Server 10.04 on a new server.
Server Specs:
Xeon E5620
12GB RAM
2X 160GB 7200 RPM in RAID1 (Onboard Software RAID)
Super Micro X8DTI-8
I am doing a typical install with no special functions on a RAID1 onboard Intel array. I know the array works because I tested it by installing Windows Server 2003 which works fine. The RAID also shows as healthy in the BIOS.
This problem is very difficult to remedy because everything seems to install fine with Ubuntu but when you reboot after the install you get a blinking cursor _ and nothing else. It appears that something happened when loading the OS but it's impossible to get past the blinking cursor because you can't type anything or escape out of it. The only thing that it will register is Ctrl+Alt+Del which will restart the server.
The funny thing is it does not display the typical Sigkill and show processes shutting down. The screen goes black and it restarts only to return to the blinking cursor. I am on my 6th attempt at an install with ubuntu and I am seriously considering switching over to windows unless.
I am almost certain this is a RAID issue because I can load the Ubuntu on 1 drive without any issues but I always get the blinking cursor in the RAID.
View 1 Replies
View Related
Jun 5, 2011
I've tried to install Ubuntu 11.04 for the whole afternoon and I'm stuck.Reason why I use the alternate cd is that I want to use an encrypted logical volume (full system, not just home folder). I did not create the partitions myself, I simply used the installer option for "guided LVM with encryption".But now I have the problem that I finished the installation without error, but when I boot my laptop nothing happens. I do only get a blinking cursor, but no GRUB, which I installed too (because there is a nother hdd with win 7).
View 8 Replies
View Related
May 31, 2011
Today I decided to play with my new 11.4 Opensuse dvd. It installed and booted without any problem, and I didn't face any problem until I rebooted the computer to test my newly installed nvidia graphics drivers. openSuse wouldn't boot. Well, the important side is: there are no kernel panics, no "hit enter to restart computer" to find the reason. Just a blinking cursor after an attempt to find the kernel. I only could get out of that by pressing the reboot button. I decided to press c and boot manually:
Code:
grub> root (hd0,4)
Filesystem type is ext2fs, partition type 0x83
grub> kernel /boot/vmlinuz-2.6.37.1-1.2-default
and the computer just froze. At this stage pressing tab for autocompletion at kernel line freezes the computer, too.
Maybe additional boot parameters?
Well, considering that installation brought me to a desktop, the system seems to be up and ready to run. Nothing seems wrong with my menu.lst:
Code:
title openSUSE 11.4
root (hd0,4)
kernel /boot/vmlinuz-2.6.37.1-1.2-default root=/dev/sda5
initrd /boot/initrd-2.6.37.1-1.2-default
(I did not install a bootloader with openSUSE. This is legacy grub bootloader of Debian)
View 4 Replies
View Related
Aug 20, 2011
Im using 5.6 DVD install to a HW raid1 Card (2 x SSDs in raid 1, Arcea Card Natively recognized by centos anaconda).I select to wipe the entire drive and remove ALL partitions (ive also tried setting this to just remove linux partitions). The install location (raid drive) is /dev/sdh the A-G are other 1.5TB drives.I also un-check EVERY drive except the raid drive (sdh). it then asks me if it ok to wipe/reformat drive (Prompts Yes or No, i click yes)Every time i do this install i get the blinking cursor after post. Im told this means i dont have GRUB installed, i do NOT disable grub or anything related to the boot-loader in anaconda installer (all those setting are left at default). ive also tried setting this to NO boot loader, and i get the same result.
This DOES work as i have gotten it to install and run prefect for a few weeks. I think what i did then was removed ALL THE DRIVES except teh raid drive, and then did the install then. This way the install drive was /dev/sdA and all worked, even when i added the drives back online after the install, the machine ran great and booted several times this way (i had to do a os re-install or else i would have left it as is.)YES bios is 100% set to the raid card as the first device to boot from, Centos 6 installed to the same raid drive boots and works great - but i need 5.6.no google help on this one, searched hard, only one article on Ubuntu doing this all the time.also everytime im retrying to install 5.6, i go into the HW raid card's bios and delete and recreate the raid1 volume (it takes about 10 min for it to format and initialize the raid1 array
View 2 Replies
View Related
Nov 17, 2010
I downloaded the OS I wished to use, loaded it onto a clean 4.0GB drive, everything went as planned. But then I rebooted, and it never booted the file off of the USB. So, I changed the boot options, and tried it again. Now, every time I boot with the drive in, it goes normally and then opens a blank page with only one line of text detailing the date of copyright, something about Linux, etc... And a blinking cursor. Is this normal and I just have to wait for it to load, or is something not being processed? Any information you guys need I can obtain, I'm not new to computers but I am new to changing OS's.
View 1 Replies
View Related
Dec 27, 2010
Six months ago I installed Ubuntu 10.04 to my otherwise Win XP work laptop. I decided to continue to use Windows' boot loader as primary: I told the Ubuntu installer to put grub2 onto a separate partition, then used dd to copy the first 512 bytes into a file in my Windows C partition, then edited boot.ini to link to it - its a common technique that is described in many support forums and blogs. This worked fine, and continued to work until a few weeks ago. One day I chose the Ubuntu option at the Windows boot loader and got a blinking cursor at top left of screen and no grub2 menu. I was able to use SuperGrub2Disk to discover and boot from my grub2 install - so that didn't appear to be broken. I finally fixed it by dd'ing a fresh copy of the first 512 bytes of my /boot partition over to the Windows C partition. So somehow the Windows boot loader decided it no longer liked my original dd'ed file.
The only things I can think of that might have changed and caused this to happen are (on Ubuntu) an update to security packages using the graphical update manager that pops up (I rarely do a command line apt-get upgrade/dist-upgrade and certainly not in this time frame) and (on Windows) a Windows Update - as it is a work laptop I tend to take whatever essential updates it suggests. As you can see I managed to fix the problem. However does anybody have any similar experience or any explanation why this may have happened? Could an over-zealous Windows Update have caused it?
View 4 Replies
View Related
