Ubuntu :: Reduce Boot Time - Remove The Grub An Directly Boot
Mar 4, 2010
Splashtop caught my imagination of my own tv like computer-"1button and ready to go " have tried puppy xpudWebConverger still unhappy Now lucid aming for 10 sec boot-Keeping ma fingers crossed installed a minimal karmic and am getting a decent 27 sec I Jus Wanted to ask: Is there a way to remove the grub an directly boot into ubuntu -not just hiding it by editing grub.d files and any other ways to reduce boot time.......
I did a clean installation of Ubuntu 10.04 and I found that after the computer booted, the GRUB stopped by waiting for entering command -- "grub >". The GRUB version is 1.98. I want to go directly to the GRUB boot menu after computer booted.
I have an old laptop that I installed EasyPeasy Lucid on. I have never used Grub2 as my other Ubuntu installs still use Grub Legacy. I have studied all the tutorials which instruct that the grub.cfg file should not be edited directly.This old laptop has one of the dreaded Intel graphics chips for which the kernel automatically loads the i915 module. Of course (like a multitude of others with Intel graphics and Lucid) I booted into a black screen but knew the workaround was to enable mode setting through grubI used the
Code: i915.modeset=1 and added it to /etc/default/grub line GRUB_CMDLINE_LINUX, just after "quite splash", just
I've set up a triple boot xp, vista, and fedora 10. The problem is that I want to remove Fedora grub, so the bios can give me all 3 choices to boot from, be it xp, vista or fedora. At the moment fedora grub boots, from there i am able to choose other operating systems. But I want to use windows boot loader, from there i would like to have windows give me the choice of different OS's to boot from.
I recentely installed ubuntu to my second hard disk (on the first i had windows 7 and data), but the hard disk that i installed ubuntu on broke, so i had to trash it. The problem is that i have an external disk reader that is only bootable after i booted at least once into windows. So basically i can't boot using either Windows or Linux disks, nor can i boot into the os itself. When i start the computer i get something like device not fount and a long code, then a prompt shows up (Rescue GRUB). What do i need to type here to remove grub and be able to boot into windows?
Old Toshiba laptop model A30 -- tried various installs 8.04/9.04/9.10. They all hung trying to boot the install disks after the initial few screens. Finally, I got 9.10 to install, dual booting XP and 9.10 by choosing F6 from the initial menu, and putting an X beside:
ACPI=off noapic nolapc edd=on nodmaid
and then hitting escape.But, after the install, I couldn't boot 9.10 from grub as it hangs after about 30 seconds of trying. The live CD would not work without the above parameters being set as described above, but does work with them set! I need those same parameters passed to grub at 9.10 boot time, but I can't figure out how to do that. I've had many successful installs of Ubuntu across a number of desktops and laptops, but I never had to deal with the guts of grub before. It all just worked.
I have a new dell studio 1558 with core i5 processor and 4 gb ram. I just installed ubuntu 10.04 and every time i boot into my windows 7 partition my grub seems to stop working. The only solution i have found so far is to re-install grub using the live cd, but it is not feasible to do that every boot. Is this a standard problem(or is there a solution to this problem)? Also, I havent updated my ubuntu yet, will that help?
I mucked things up a bit-- 1) I had only windows on my drive. 2) Using 10.04 on USB, I made a 10gb ext3 partition and a 1gb swap area and installed 10.04. No problems at all using grub2, and the GUI is nice for dummies like me. 3) I got antsy so I made an 8gb partition and installed 8.04 on it. It automatically installed grub (the old grub).
Now when I boot my machine the Old Grub loads, not Grub2. I can select 8.04, 10.04, or XP no problem. When I select 10.04 and use the GUI I can see 10.04, 8.04, and XP, but things are in a different order (clearly the grub2 order). Questions: 1) How can I get grub2 to take over booting? (I like the GUI) 2) I'd like to install puppy linux too, but I'm afraid of really screwing things up. Can someone recommend a safe way of installing it (besides just running from a USB- I've had mixed luck using USB OS's over long timeframes).
I have been unable to locate an answer to the below.Just installed 10.10 server and noticed that during boot each time the Grub Menu pops up. I have to manually press a key on my keyboard each time to get through this menu. This is a big problem as this is going to be administered remotely. here is my /boot/grub/grub.cfg file
Code: # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates[code].......
Now, It seems to me that with the settings above that menu should time out after a few seconds but it is not. I must press enter each time.how I can get this damn thing to timeout after a few seconds?
I'm a very new Linux user, so speak slowly and don't use big words. I installed Karmic from the Live CD. It is the only OS in use on this system. I then upgraded to Ubuntu Studio using the instructions found on the wiki.
On bootup, I get a brief message stating "GRUB loading" and then the system automatically boots to the generic kernel. No GRUB menu is ever displayed. I would like the option to boot to the real-time kernel, but I have no idea how to edit the appropriate files. I've done a fair amount of reading on the subject, but I find very little information relating directly to the real-time kernel, and so I still feel like I'm too green to do it without messing something up.
I'm not consistently able to boot into Ubuntu Lucid on my new dual boot (w/ Win7) setup. Machine is a Dell XPS 1645 laptop. Usually it takes 1-3 tries of hard shut down and restart before the OS starts up. Boot info script results are below. Windows starts up fine everytime. What I usually get is this: Dell startup screen, then Grub2 menu, then after selecting Linux kernal a blinking cursor at upper left of monitor and it just hangs.
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ==============================[code].....
I've had to give up trying to install linux. It just won't work on my machine, a Presario 6370us that has been upgraded over the years such that it is not compatible with linux, apparently. (You can read my travails elsewhere on this board; thanks very much to all who tried to help.)
Now, how do I remove the GRUB boot loader from my system? I need the system to boot directly to Windows XP.
I can't start linux in any way, shape, or form, so I need to either edit GRUB inside the GRUB environment itself, or to do so from Windows.
Ideally, I'd like to remove GRUB entirely. Failing that, I'd like to edit the GRUB config file so that only Windows is an option. Failing that, I need to make Windows the default OS.
I installed opensuse 11.2 today on my external hard drive and everything is running great, but I want to see if I can make a modification to the way my computer boots. I share this computer with others and they are not going to be happy to have to wait for the boot menu to start when they turn on the computer in order to choose which OS to run (Especially since if they do not make a choice it auto runs opensuse after a few seconds).
What I would like is if opensuse can be "out of sight, out of mind" and only load when I put in the live cd and then choose to boot from my external...... is it possible to do this?I am not a computer wizard and do not work in the industry.
I just made my system unbootable... Here is what i did.. I have two sata HDDs
160 GB (Contained Windows 7) 500 GB
I copied entire 160 gb as an mirrored image to 500GB HDD using Acronis Disk Director. I deleted entire 160 GB HDD.. Removed the 500 GB HDD and kept it seperate.. Installed ClearOS Enterprise 5.2 Worked a little bit... The i wanted to delete ClearOS.. So i connected 500GB HDD and booted again in Acronis Disk director Formated the entire 160GB HDD.. Copied back the entire 160 from 500GB HDD.. Now my sytem refuses to boot... Just 4 letters "GRUB" appears on the screen... I tried booting using XP CD.. It gives a blue screen.. I tried Windows 7 CD.. It says unable to fix due to MBR problem..
I have Windows 7 and Ubuntu 10.04 dual-booted on my machine. grub was aautomaticlu installed as the primary loader. Soon i want to nuke my ubuntu partition but i know that will delete grub. Can i remove grub or at least make Windows boot loader default.
Im finally deleting vista from my disk, but as I am game addict I will re-install it afterwards just for games. Now I assume that will overwrite GRUB, so how do I restore boot record and at same time keep my grub config?
i am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
I've been a long time Windows user, but I've started a small firm and because of lack of funds, I've decided to install Ubuntu on my company's PCs.I have 8 PCs in total - 6 of them with Intel CPUs, and the last two with AMD CPUs. I bought the extra two computers because I've managed to find an extra two people to work at my company, and AMD-based PCs are cheaper so I've decided to buy them instead of Intel.Long-story short, I've installed Ubuntu 9.10 and boot time takes about half-an-hour. After the computers finally boot, USB hardware doesn't work at all. I was forced to buy PS/2 keyboards & mice and they both work fine after the PCs boot.I don't know what's causing this delay.I've enabled Cool 'n Quiet from BIOS.I've tried several instructions like editing the /etc/modules file.I've installed cpufreqd, tried to configure it, but it didn't work.I've check the CPU stats and my CPUs are running at 800MHz. I can't believe nobody managed to fix the 800MHz problem as I've noticed it's quite common among AMD Ubuntu users. I think I've tried almost anything that I've found on this forum.I can't keep asking my employees not to reboot their PCs. Both Chrome/Firefox crash a lot on Ubuntu so they're forced to restart their computers.The computer specs are: AMD Athlon II X2 240 dual-core @ 2.800MHz, 2GB RAM, 500GB HDD, etc.
I've got two laptops running Ubuntu. Both have had Lucid installed from the live cd. I have upgraded one of them to Maverick. Both distributions are running great after they boot up, but I haven't experienced any faster boot times with either distibution. Both boot to Bios and then the screen goes black with a blinking cursor in upper left corner of the screen. The black screen remains for 30 to 45 seconds and then I get the Ubuntu splash screen for maybe 5 seconds, and then desktop. Why am I not seeing faster boot times? I realize 45 to 60 seconds is good compared to other os's, but I anticipated much faster boot times. Shut down on the other hand is quite fast at maybe 5 to 10 seconds. Does anyone else get this black screen on boot? Seems like wasted time cause I can't tell what's going on during the time there is a black screen. This is not a real big deal breaker, as I don't reboot very often, but I just wonder why bootup isn't faster.
I've been having a problem on my AMD based machine, 4cpu, gigabyte ga-ma78gm-s2h Mobo, 8GB mem, two 2 terabyte Sata HDs.One thing I've found is that any kernel after 2.6.32-17 has a randomness at boot time whether the system will completely boot or not.
For instance just today I downloaded and installed 2.6.32-24
It fails to boot (I've tried cold boot, warm boot).Running its repair also fails to completely boot.My experience is that if I keep trying it "may" eventually boot but I believe there was some change after 2.6.32-17-generic that's causing the problem.Because as with 2.6.32.23... which also fails to complete bootup many times... eventually my guess is that 2.6.32.24 will also boot "sometimes".But why does 2.6.32.17 always boot for me? Something changed and its not my setup.
One thing I notice and hope someone here can steer me in the right direction. When I start up my computer I have the list of options to choose from, if I choose to boot into Win 7 I am the presented again with another boot menu from windows. I would like to remove the Windows boot loader.
Shut down as normal last night, no major changed yet after booting this morning my computer went straight into memtest86+. After finishing, and i rebooted, it did it again. So, i held shift to get into the grub.
Ok i start to find it boring to ALT+CTRL+F1 each time i want that when i boot it directly go to tty 1. But i also want it to load desktop environment, but not to show it, only load it, so if i ALT+CTRL+F7, it goes to desktop environment. If its not loaded, it will not go to desktop environment or it will take like 15 sec to load it, this is why i want to load it while i am in the terminal.Also, how can i switch resolution in terminal?
This on a Vostro 1220 Laptop w/ Intel 5300 wireless:
A.I have long boot up time.I think it's because of the eth0 network search which I don't use.I have an intel wireless 5300 card running.How can I speed up the boot time, i.e. disable or change the eth0 at boot, the searching?
B:When I restart or shutdown, the screen flashes repeatedly and gets some garbled colors along the top before finally rebooting looks like windows ME or something).This vostro has an intel x4500HD vid chipset in it.
C.How do I get into gnome configuration editor to turn on Metacity compositing? Alt-F2 and run gconf-editor doesn't do it. I don't do compiz, but need compositing.
D.I need to install Chromium Browser as it sync my bookmarks.I have RPMforge enabled btw also...how can I do that? I.e. rpm repo for chromium?
This will help me get off to a running start so I can get up to speed on CentOS..
I am having dual boot system(windows 7 and Fedora 12).When i switch on my system.It show the the timer 3 sec in order to get boot selection window(means window which asks that what to start fedora 12 or windows 7).I want to increase this time from 3 to 10 sec.
