Ubuntu :: Installed Dual Boot Fedora And Lost Kubuntu
Sep 19, 2009
I had Kubuntu 8.10 with KDE 4.0 interface and i decided to try out fedora to see if i liked it and wanted to eventually switch. i've done so many dual boot systems with Kubuntu and not had any problems that i decided not to back up my system this time before running the installation. after running the installation and shrinking my hard drive (200 gb) by 80 gigs, i rebooted to find that Kubuntu was no longer bootable. the first time i booted into fedora, disk utility popped up with a message that said "1 or more hard drives is failing". i ran the test that it recommended and found no problems. then i ran the longer test and still found no problems. i've rebooted a few times and have not been able to see Kubuntu in the boot loader options. if you need any more information i will be happy to provide it. my question, obviously, is how can i retrieve my Kubuntu partition. it is still there but is not bootable.
View 9 Replies
ADVERTISEMENT
Feb 22, 2010
I've installed up a copy of Kubuntu 9.10. I want to use it to play eve online and replace my copy of windows. So far I have managed to get it installed, got the video drivers and wine sorted, and got eve online to work with wine. I'm quite happy with myself up until odd things started to happen. Basically, I want to recompile my Nvidia driver to a newer version, I know how to do this, I need to press ctrl alt F1 to drop to terminal, kill kde and then install the driver, i've done it before without issue. However this time around something is wrong. I press ctrl alt F1 and the black terminal window pops up... but I have no option to log in, same for terminals 2 - 6.
I did this, and sure enough none of my tty processes are showing, i've basically lost my terminals , as far as my limited experience goes, getty is responsible for the terminals right? How do I reinstate my terminals and get to a point I can kill kde and get back to shell? I have no idea what i've done to get in this state. Also, as a side question, before all got screwed up and i did manage to launch eve online, I could run one client perfectly. However with 2 clients things got all choppy and laggy? why is this? I can run 2 quite happily under windows 7
View 1 Replies
View Related
Feb 14, 2009
I'm trying to dual boot Fedora 10 and Ubuntu 8.10. I have installed Ubuntu first than Fedora (with GRUB installed on it's partition) but Ubuntu's GRUB got messed up. I reinstalled Ubuntu and now Ubuntu works fine but I cannot boot my Fedora. I have set "/fedora" as a mount point for the fc10 install and I can see that from Ubuntu but I can not boot into it. I no longer have any idea where to search for some way of getting it to work without reinstalling ....
View 10 Replies
View Related
Sep 4, 2011
I have recently installed Fedora 15 KDE (with Dual Boot Win7) on my computer:Dell Optiplex 330, Intel Core2Duo- 2.53 GHz, 32 Bit, 2GB RamnVIDIA 8400 GSWhile going through the Guides mentioned here: for F15, I tried to install nVIDIA Drivers after updating the Kernel.suyum update kernel*rebootHowever it gave me some errors and then I did try the following method (as described in Missingbox studio guide)su -yum install akmod-nvidia xorg-x11-drv-nvidia-libs.i686 bootconf-gui kernel*develfollowed by Reboot.
I start my computer, I get the screen which shows that Fedora will boot in 3 seconds. This is followed by a black screen with a "Blue followed by white" Bar running towards right (where Fedora 15 is written)....It stays there for ever (I waited for 3 hours and then switched off my computer).Presently I am writing this post through Windows7.Is there any way I can repair Fedora through Win7 or by any other means.---------- Post added at 10:57 AM ---------- Previous post was at 10:51 AM ----------I remember the instructions (given by leigh123linux) that we should provide the following information
rpm -qa *vidia* *kernel*|sort;uname -r;lsmod |grep -e nvidia -e nouveau;cat /etc/X11/xorg.confI had it saved as a .txt file in my home folder.
View 8 Replies
View Related
Apr 8, 2010
I am trying to dual boot Kubuntu with an existing Windows 7 already installed. I downloaded the Kubuntu iso and burned it to a DVD. I changed the boot order in BIOS to accept the optical drive first. Kubuntu installer starts, I can select a language and can choose to install. However, the problem happens right after I select install. The screen goes dark and the blinking white tab disappears, nothing happens, and I can do nothing to trigger any response. Now, I have tried the alternative text-based installer and that works. I mean that it installs, but when I try to boot Kubuntu after the installation nothing happens and the same or very similar thing happens that occurred back with the non-text installer.
I don't know what to do or how to diagnose the problem. I thought it might be the boot loader or maybe the graphics card, but I'm not sure. I'm very new to anything Linux and I'm not the most computer savvy person.
I'm using a Gateway NV79 laptop
spec:
Intel Core i3 330M
500GB HDD
4GB RAM
Intel Graphics Media Accelerator HD with 128MB
View 3 Replies
View Related
Apr 30, 2010
Not a major issue but my Ubuntu boot screen change to the old classic Orange theme after i installed Kubuntu on a different drive and ofcourse a new Grub loader as the Kubuntu installation prompted. It can't be because of the Kubuntu installation but i can't find any other reason for that to happen.
View 3 Replies
View Related
Dec 21, 2010
I have Win7, Kubuntu and a third OS (and home) partition for trying out others. I did Arch, Debian and Chakra without problems with triple booting. I skipped the bootloader installation/configuration step when installing those, booted into Kubuntu and ran update-grub to get the new one added to the boot list.
I used a separate partition for /boot (sda6), and have only one hard drive in this machine.
Following the same procedure (skip bootloader install) with openSUSE 10.3, I managed to loose the ability to boot Kubuntu.
I know the Kubuntu partition is fine (or at least still intact) and have since been able to get Windows added to the grub menu after a few attempts with grub-install and update-grub, which boots.
View 8 Replies
View Related
Feb 18, 2010
I just bought a Dell 537s machine and configured it for dual boot of Windows 7 and Kubuntu 9.10. On my old dual boot machine I had the Windows System and the Linux System on different disk partitions. That way I could write fstab in such a way as to make the Windows System read-only as seen from Linux, so Linux couldn't mess up any Windows System files (and since Windows can't read ext3, Windows couldn't mess up the Linux System).
But the new machine came with Windows 7 installed and gobbling up 3 primary partitions. Kubuntu installed itself in such a way that Linux can read/write to the Windows System. This makes me nervous that Kubuntu might be able to mess up Windows 7.
Is there any way to make specific Windows 7 directories/files unwriteable as seen from Linux without altering their behavior in Windows 7?
View 1 Replies
View Related
Jun 23, 2010
Having successfully installed kubuntu 10.04 on my Powermac G5 I was wondering if I can install os x and dual boot, there are plenty of tutorials around but all of them involve installing kubuntu on a system with os x already installed. If there is any danger of damaging Kubuntu then I will leave it as I really don't want to go through the hell of getting it working properly again! Also I have plenty of hard drives kicking about - would it be safer/easier to install os x on it's own hard drive? And if so how would things work with yaboot?
View 2 Replies
View Related
Nov 20, 2010
My system has 2 hard drives, a 400gb master and a 250gb slave. sda (my main 400gb Windows drive) has XP on it. The slave (sdb) has 3 partitions:
sdb1 is for my downloads (NTFS ~180gb)
sdb2 has Kubuntu 8.10 installed (ext3, 60gb)
and sdb3 is the swap (3gb).
I want to do a destructive upgrade to Kubuntu 10.10 - I have the CD already and burnt. I know I have to select the partitions manually due to the complicated setup, I know I need to format the sdb2 partition to ext4, mount point /, and the swap can stay the same. On which hard drive should I install the bootloader? I can't remember where it is installed now, all I know is I had a lot of problems with the install.
View 9 Replies
View Related
Apr 11, 2010
I want to dual boot kubuntu. I am a linux noob so have basically no experience with linux except what i have done of the live cd. My problem is that when I get to the part of the installer relating to partitions. It wont allow me to select the free space I have shrunk off my windows/data partition. it calls the space unusable and will not allow me to proceed when it is selected. Shouldn't the installer turn the free space into a partition for kubuntu to install to? The installer also show a bar wich marks off the partitions and how much each one takes up it does recongnize that there is free space because it tells me that I have 25 gb free.
View 14 Replies
View Related
Jan 19, 2010
I really hate to ask this. I have been searching for almost 2 days for a comforting answer but still not satisfied. I have a new Dell Studio 1555 64 bit system with Windows 7. I really like running dual boot systems and this is my first W7 machine. Is it vaguely safe to attempt to install Kubuntu 9.10 on this system? It still smells new and I'd hate to wreck it this soon, LOL. The vast amount of info on this forum along with the sheer number of posts makes it difficult to sift through sometimes.
View 1 Replies
View Related
Apr 19, 2011
this is my first thread. Just installed Desktop Kubuntu Natty 11.04 x86_64 and have been amazed by its possibilities. I would like though to install a second OS which is free-ware and unlike Kubuntu but as powerful and userfriendly. Would anyone recommend the followinf?
FreeBSD?
Fedora?
Mandriva?
View 5 Replies
View Related
Jan 4, 2010
I was running a dual boot Ubuntu 9.10/Windows XP. I reformatted just the windows partition and re-installed it, and now I don't get the option at boot time of what OS I'd like to use...it just boots straight into Windows.
View 2 Replies
View Related
Jan 3, 2011
I dual boot windows 7 and Kubuntu on my laptop, my wireless card works on windows 7 no problem, and luckily the company also has a linux version of the driver. My question is, how can I install packages on kubuntu without a wired internet connection, and what packages should I download to be able to install the driver on kubuntu without getting errors?
My wireless card is Realtek 8192CE.
Here is the download page for the driver, in case I missed something.
I am dual-booting Kubuntu/Windows 7 x64bit.
View 8 Replies
View Related
Sep 6, 2010
I've been running Jaunty on my drive D: with XP Professional on a separate partition. Today I formatted a different drive, C:, which had previously shown up in GRUB as XP Home Edition, and placed a new XP Professional on it.
Now when both HDs are connected, C: boots without GRUB starting, and when I disconnect C:, the GRUB on D: starts, but cannot find the XP Professional NTDLR. I don't want to take up too much of anyone's time here with this; I'm mostly just curious as to what may have happened?
View 9 Replies
View Related
Apr 6, 2011
How can I get my dual boot working again? I had a dual boot with Ubuntu 10.04 and windows 7. It was all well tweaked but I was annoyed with the ugly boot menue with old kernells so I decided to install BURG loader and remove some of the old kernells. So I did and after that I have not been able to reach my Ubuntu boot.
After multiple attempt to restore the old kernells and reinstall grub (through a USB live stick) i couldnt log in to either system (following the steps in this support thread [URL] Finally i mamanged to get my windows 7 working but my boot menue only shows memtest and windows 7 (not Ubuntu). I am affraid to tamper around to much and having a non funtional lap-top in the end. My lap-top still "miss" 40 GB that was set aside for the Ubuntu boot.
View 2 Replies
View Related
May 2, 2011
Hey, yesterday I decided to update from 10.10 to 11.04.
I was using Windows Vista in dual-boot with Ubuntu but after updating Ubuntu to 11.04 I lost my dual-boot menu. It worked without problems before update. Now it starts automatically to Ubuntu log in screen.
I've tried so far:
1. Updating GRUB via terminal
2. Looked at my menu entries
Code:
grep menuentry /boot/grub/grub.cfg
menuentry 'Ubuntu, Linux-ydin 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
[Code]....
View 9 Replies
View Related
May 3, 2011
I was using dual boot (windows 7 and ubuntu 10.10) and it was going well. Couple of days ago I updated to Ubuntu 11.04 and everything was OK. Yesterday I cought some virus in windows, installed Microsoft security essentials which asked to update Windows. After update, dual boot is gone. It boots to windows directly with no option to choose between OS.
Quote:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
sda1: __________________________________________________ _______________________
File system: ntfs
[Code]....
View 7 Replies
View Related
Jan 12, 2011
Just installed Ubuntu 10.10 on dual boot computer. Each OS is on separate hard drive with GNOME selection between Ubuntu and Windows 7 Ultimate. Firefox was working fine yesterday when I went to use today, nothing. Email through Thunderbird is down as well.
View 3 Replies
View Related
Dec 28, 2010
Generally I am used to installations of dual boot on different partitions(the traditional method) any windows OS with any ubuntu OS.I tried that with backtrack 4 and Ubuntu 10.04 netbook edition! I had previously installed ubuntu 10.04 and then had an extra partition that had data in it.Went ahead to boot with the backtrack 4 disk BUT it did not give me an option for installing them side-by side so i did it manually by editing the partition with the partitioner! I had 2 swamp spaces one i which was initially there for Ubuntu and the other i created! Then simply formated ine partition with EXT3 and mountpoint of / which made two of them!after installation, the grub shows that there is another OS but when it does not load!
View 2 Replies
View Related
May 8, 2011
i had a dual boot with xp and lucid lynx, then upgraded the xp to win7. windows commonly overwrites grub with it's bootloader. and so it did. now i can't access my lucid OS. i need to get grub back (i need to get lucid back).
here's my fdisk:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
View 5 Replies
View Related
Jul 16, 2010
Everything was working fine with dual boot sda/osuse 11.2 and sdb/kubuntu. Decided to install new 11.3. Lost dual boot, can now only boot to 11.3, sort expected that. I see the root and home partitions in Dolphin but can't mount or open them? Would like to access the files copy to Osuse. Rite clik get me "error permission denied" I can reinstall Kubunt and it will set up my boot loader correctly with grub2, but is their a better quicker way? Why does Osuse still use the legacy grub?
View 5 Replies
View Related
Apr 1, 2011
I am trying to Dual-boot Windows & and OpenSUSE 11.4, and have run into walls all over the place. Here is what I did:
1. Windows 7 was already installed. (Don't like it, freezes all the time)
2. Installed OpenSUSE using default partition options.
3. Booted into OpenSUSE with no problem
4. Tried booting into Windows, no joy.
5. Got that figured out, now I can get into Windows.
6. GRUB is gone, so now I can't get back into OpenSUSE.
View 8 Replies
View Related
Jan 22, 2010
How to you mount a removable storage in Kubuntu 9.10 that is running on a dual-boot machine with Microsoft Windows XP.
View 4 Replies
View Related
Jan 8, 2011
I had dual boot PC (openSuse 11.3 / Windows XP). Then I had to reinstall Windows XP, so I lost dual boot capability. (No Grub boot options screen, directly Windows boot.)How can I reinstall Grub (only Grub)?I tried by booting with the openSuse installation DVD, but no repair option appears as in older versions.
View 5 Replies
View Related
Apr 17, 2011
Before the installation, I had triple boot of WinXP, Win 7, Ubuntu 10.10. As you can guess, the main boot-loader was grub. The second is Win 7 boot loader, and there it gives the option what to choose, load XP or Win 7.I made a decision to remove Ubuntu and install Debian(you know better than me why I did). So first, I searched a guide how to un-dual-boot. It told me to delete the two partition that Ubuntu use(swap and ext4) and write to MBR the win 7 boot-loader(using EasyBCD), so I delete them and use EeasyBCD. At this stage, I had 2 partitions: NTFS for XP and NTFS for Win 7, and the Win 7 boot-loader(and XP) worked pretty well.I install the latest testing of Debian(6 RC2) from DVD1 using this guide, except I choose to use the graphical installer, ext4(not ext3 as there), install the desktop environment, and choose to install grub(even know it didn't asked me). The swap partition I set is 3 GB because my RAM is 2 GB, even know that ubuntu set it in the past to 2 GB.The installation went pretty well, just when come to grub package, it says that there was an error with installing grub package(it didn't told me what), I had no choice, so I choose to skip over grub/lilo and finish with no boot manager. I was thinking to myself: "So I couldn't install grub, at least I have the Win 7 boot-loader(which contain XP loader), and maybe Win 7 boot-loader will recognize Debian too.". But I end up with no boot at all.It told me than when choose not to install boot-manager that I need to load /vmlinuz and give it the parameter root=/dev/sda4(my deb partition).I think that if I could install grub, I could load all my boots("sudo grub update" right?).How can I fix it?
View 3 Replies
View Related
Mar 6, 2010
can someone point me in the right direction as far as the GRUB goes. i have the partition all done already. and ubuntu is already up and running, but i am installing 7 now.
View 3 Replies
View Related
May 11, 2010
Was wondering how to do this. I was trying to do achieve this from looking at different guides, but I haven't had any luck.
I am on a custom PC, with dual screens; one LCD, and one CRT, from which I installed OS X 10.5.6 from a retail DVD.
I installed OS X first, because I needed to format my HDD to use GUID partition table, because you can't install from a retail DVD without using GUID. Once OS X was installed, I partitioned my hard-drive into 4 partitions from the OS X disk utility. These partitions were HFS. I then used the Ubuntu Lucid x64 Live disk to format the 3 nre HFS partitions to use ext4, for two of them, and one swap. I installed Ubuntu as normal.
I re-booted, and GRUB recognized my OS X instillation, so I tried to boot into it. It went into OS X, but with some major problems. My LCD screen was going haywire, but my CRT seemed to be working, but it took on my LCD's screen resolution and place as the main screen.
I thought my OS X instillation was badly damages, so with Ubuntu still installed on the other partitions, I re-installed OS X, which I am on now.
I want to know how to boot back into Ubuntu, while still having the option to boot into OS X.
View 9 Replies
View Related
Mar 20, 2011
I installed 10.10, dual boot. (with xp pro)Did reboot.choose ubuntu from boot options.Now only have progress bar no gui.
View 9 Replies
View Related
