OpenSUSE Install :: 11.4 And Win7 Dual Boot - Grub Lost?
Apr 1, 2011
I am trying to Dual-boot Windows & and OpenSUSE 11.4, and have run into walls all over the place. Here is what I did:
1. Windows 7 was already installed. (Don't like it, freezes all the time)
2. Installed OpenSUSE using default partition options.
3. Booted into OpenSUSE with no problem
4. Tried booting into Windows, no joy.
5. Got that figured out, now I can get into Windows.
6. GRUB is gone, so now I can't get back into OpenSUSE.
View 8 Replies
ADVERTISEMENT
Jan 8, 2011
I had dual boot PC (openSuse 11.3 / Windows XP). Then I had to reinstall Windows XP, so I lost dual boot capability. (No Grub boot options screen, directly Windows boot.)How can I reinstall Grub (only Grub)?I tried by booting with the openSuse installation DVD, but no repair option appears as in older versions.
View 5 Replies
View Related
Sep 13, 2010
I'm having serious troubles to install ubuntu-10.04.1. My raid is an hardware raid with intel chipset. Note that win7 is already installed and working with my raid. I made some space from windows, to install Ubuntu (40gb). First, I run the installer, everything seems to be fine. I choose to install Ubuntu were there is the most space free (sorry, I'm not sure about the real terms used there).
Then my partition with the vista loader appears. So the installer can see my raid, and should work fine (everything is detected correctly). But once I'm in the end of the installation (around 95%), a pop-up appears, and tells me that Grub can't install in /dev/sda and it's a fatal error. I can choose an another destination, but it doesn't seems to work.
View 9 Replies
View Related
Feb 14, 2010
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
View 4 Replies
View Related
May 26, 2011
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
View 4 Replies
View Related
Jul 16, 2010
Everything was working fine with dual boot sda/osuse 11.2 and sdb/kubuntu. Decided to install new 11.3. Lost dual boot, can now only boot to 11.3, sort expected that. I see the root and home partitions in Dolphin but can't mount or open them? Would like to access the files copy to Osuse. Rite clik get me "error permission denied" I can reinstall Kubunt and it will set up my boot loader correctly with grub2, but is their a better quicker way? Why does Osuse still use the legacy grub?
View 5 Replies
View Related
Jul 9, 2011
I wanted to install ubuntu 11.04 alongside win7 on my notebook (with no optical drive). I created 2 primary partitions (one for win7 [ntfs] one for ubuntu [ext4]) and 2 logical partitions (one for swap one for general use for storage[ntfs]) by running ubuntu from my USB Flash disk and using gparted. First, I installed win7 without having any problem, then ubuntu also without having any (apparent) problem (I installed boot loader on MBR: the default setting). After the ubuntu installation is over, I was instructed to restart my computer as usual and win7 started without asking me which OS to boot. When I run ubuntu from my Flash disk and run gparted and selected the boot drive as the partition on which ubuntu was installed, I got the error saying "missing operating system". I suppose GRUB is misconfigured and that is causing the problem because nothing went wrong during the installation processes. How to configure GRUB by running ubuntu from my Flash disk. BTW win7 is working just fine.
View 4 Replies
View Related
Aug 12, 2011
I have been an MCSA for the last 20 years, but recently I have been very impressed indeed with Ubuntu 11.04, having dabbled with and then discarded Susi Linux some five years ago. My problem may be summarised as outlined below: Using the downloadable ISO I installed Ubuntu 11.04 as a dual boot on a Win7 100GB HDD on my Lenovo T61 laptop. No problem they both rock and I'm very impressed. During the installation procedure I selected the largest partition sizes available from the Ubuntu installer wizard being 25GB Extended split into 18GB Ext4, and 3.2GB and 3.2 GB swaps (I couldn't suss out any way of manually increasing them any further).
I found that the 11.04 Startup Manager application didn't work at all, so I downloaded and installed Grub Customizer 2.1..and that did work after a fashion.. certainly enough to actually effect changes in the grub configuration settings. Everything worked so well on the 100GB HDD that I decided to transpose the entire disk image to a new 500GB WD Scorpio and make the dual boot my main working disk. Using Acronis I imaged off the 100GB installation selecting the partition by partition, and retain disk signature options. I then recovered the image to the new 500GB HDD and everything works beautifully on the new HDD.
Except of course all the partitions are still the same size. I won't waste your reading time recounting everything that I have done using Acronis Disk Director (V Good) and Gparted (not so good), but needless to say whatever I do Grub won't have it, and I have lost count of the times that I have re-recovered the good image. Basically I want to increase the partion sizes to apportion larger partitions to both Win 7 and 11.04 and obviously I'm missing something somewhere.
Fdisk -l -u produces..
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x9f011ed1 .....
View 6 Replies
View Related
Jul 5, 2011
I just installed Fedora15 on my laptop. When the installation completed, the system rebooted and gave me a Grub Error 17. I logged in the rescue mode and got the following output from
Code:
fdisk -ls
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0d8b0d8a .....
View 5 Replies
View Related
Aug 27, 2010
Partition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
View 14 Replies
View Related
Aug 9, 2010
After installing Windows 7 my computer doesn' t ask which OS to start. I starts with win7 automatically. How can I start my computer with OpenSuse?
View 2 Replies
View Related
Apr 30, 2011
I resized my windows c drive to make another drive which also has Open SUSE 11.4 dual booting which was working fine.
After reboot I get missing operating system so I boot the live Opensuse DVD and the windows and Linux is still there so I tried the boot configure tool in YAST but get the error because of partitioning the boot loader cannot be installed properly
Can I make a boot floppy somehow? I now have a grub menu when it boot sup but do not know what to do now
View 9 Replies
View Related
Apr 27, 2011
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
View 9 Replies
View Related
Jan 24, 2010
I am currently rebuilding a couple laptops and a desktop to dual boot Windows and Suse 11.2. Windows is installed on partition 1. On the laptops, the build goes fine and dual boot with grub is OK. No issues. But on the desktop, the exact same build (after all the on-line updates, etc) fails with "Operating system not found" on the final (and first) boot. It seems that the Suse 11.2 build is somehow resetting the active partition and the boot does not see grub or Windows. When I reset partition #1 back to "active, only Windows loads. So I guess I need to fix this by reinstalling grub. Or use the Windows boot loader.
(1) Where is grub located on my system?
(2) What partiton is the Linux master Boot record If I wanted to use the Windows boot loader and do the following command to grab the 512 bytes I need:
dd if=/dev/sna? of=grub.bin bs=512 count=1
My partition layout is below. This is output from gdisk.exe in DOS7. It's an 80gig drive.
1 = Windows-7
2 = /boot
3 = swap
[code]....
View 9 Replies
View Related
Jun 17, 2011
I saw a good quick fix for grub after win 7 updates over here
My question is, after WIN 7 sp1 it seems every update win 7 does borks grub and resets the system to boot from the Win 7 boot partition, Is there a way to prevent this or is it going to be a boot from CD and repair after every update?
Cause I know M$ isn't going to want to fix it as they don't like sharing systems.
I'm running
OpenSuse 11.4 Win 7 sp1 dual boot
View 3 Replies
View Related
Dec 12, 2009
I dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
View 1 Replies
View Related
Nov 19, 2010
I would like to recover my grub installation in a dual boot system. if there is an easy way to recover grub using flash disk? If yes is your suggestion opensuse developed? (currently running 11.3) . It would be nice also to have some gui just to make things easier. If not I assume that then the only option is the boot from dvd. Is that right?
View 9 Replies
View Related
Feb 7, 2010
I am a major noob to FC12. I need to install Windows 7 Pro and FC12 dual boot. I first used the windows CD to create 1 250 Gig partition on my 500 Gig HD. Of course windows created the 100 MB system partition. I left the rest unpartitioned. Windows installed okay. I then booted to the KDE FC12 Live CD and installed FC12. I specified to use the Free Space remaining on the HD. The installation finished but now only boots into FC12 and does not prompt me for the OS I want to boot.
View 3 Replies
View Related
Dec 22, 2010
Current set-up:
Athlon 64 2800
2 GB RAM
340 GB on two HDD
Ubuntu 10.04 LTS
Win XP Pro SP3
After getting the Silver Ghost all set up and purring like a kitten for my daughter, she now informs me she'd rather have Win7 HP instead of Win XP Pro SP3. Ubuntu and Win XP Pro are on separate HDD. Can I do a "clean install" of Win 7 HP on the Windows drive without screwing up GRUB? Or will I need to do the dance described at [URL]. I've had to modify Ubuntu because of conflicts between 10.04 and the Ralink 2780 (?) wireless-n drivers.
View 2 Replies
View Related
Apr 28, 2011
A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.
I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.
FYI the PC has a single SATA disk installed partitioned as follows:
dev/sda1 100Mb Win System Parkition
dev/sda2 Windows NTFS
dev/sda3 Windows FAT
View 8 Replies
View Related
Sep 1, 2011
I installed ubuntu 11.04 to my Compaq Presario CQ61-402SA (Dual boot with windows 7 Home premium 64-bit, Via a partition) And now I can't get back to my W7! Disk Utility says that it is "unallocated"! It had lot's of important info on it! Sorry for urgency, but it's important I get this OS and files back, intact.
View 9 Replies
View Related
Sep 1, 2011
i have ubuntu 10 and win 7 dual booting on one hdd, all of a sudden grub says error no such partition when i select windows at the boot menu. and i cant get to the win7 partition from ubuntu (to play music and stuff, this used to work, places, mount filesystem, 250 gigs whatever). i've tried the stuff in these links and nothing has worked so farpartition info
sudo fdisk -l /dev/sda
Device Boot Start End Blocks Id System
/dev/sda1 1 29094 233697523+ 7 HPFS/NTFS
/dev/sda2 * 29095 30401 10498477+ 83 Linux
View 8 Replies
View Related
Jun 21, 2010
I want to know about grub. Let start with the explanation of grub. I am using Ubuntu 10.04. Yesterday when I installed widows7, I lost my grub. Every time I tried to install windows running on Ubuntu machine, the grub is lost. Why is it so? How can I restore it (for Ubuntu 10.04)? Can any advance setup be made while installing windows, so that the grub is not lost?
View 3 Replies
View Related
Apr 18, 2010
New to Linux and am wanting to install ubuntu 9.10 or 10.04 on a single separate 80gb drive. I have Windows installed on 2 80gb drives in Raid0 (nvidia controller) .I have installed 9.10 but Win7 will not load from the bootloader : gives me the error invalid signature. I've looked around and tried a few things to get it to load with no success.. is the Raid0 the issue?
If I try to install 10.04 it will hang and eventually errors out, I believe on the raid drive because it comes up with dev/mapper/nvidia_hhfbdccf1..
View 1 Replies
View Related
Mar 14, 2011
I have Opensuse 11.2 installed (on hd0 at the time of installation) To install Windows 7 alongside I had to switch my hard drives (hd0 became hd1 and vice versa) What is the best approach to reinstall grub and get both Opensuse and Win7 visible in the grub menu?
View 1 Replies
View Related
Jan 4, 2010
I decided to install windoze 7 and it finally worked. It was complicated, I have two HDD's on cable select and the one I wanted M$ installed on was second in the series. So I changed that around and it finally installed. I then changed it back to the way it was and now of course grub works for SUSE but not M$. I get error #13. My Windows drive also does not show up in sysinfo:/. I went to terminal and ran fdisk -l and
Code:
Disk /dev/sda: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0004924b
Device Boot Start End Blocks Id System
/dev/sda1 * 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 9726 76019580 83 Linux
Disk /dev/sdb: 472.3 GB, 472345632768 bytes
255 heads, 63 sectors/track, 57426 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x30ceb02f
Disk /dev/sdb doesn't contain a valid partition table. And that is the outcome.
View 4 Replies
View Related
Apr 20, 2011
The installation went smoothly however, I have installed SuSE11.4 on my 2nd Hard Drive. Now Grub doesn't work and I want to know where and how to install it.
View 9 Replies
View Related
May 26, 2010
I have installed Windows Server 2003 after CentOS. Then GRUB boot loader lost. Is there a way I can install GRUB boot loader from Windows?
View 2 Replies
View Related
Apr 20, 2010
HW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
View 9 Replies
View Related
Apr 22, 2010
I lost grub on installing window7 , used caf,s way Re-Install Grub Quickly with Parted Magic - openSUSE Forums to install but on typing find /boot/grub/menu.lst it does on find menu.lst however i could see the file by mounting the right drive. I dont want to fresh install suse to get grub
View 9 Replies
View Related
