General :: Trying To Install Kubuntu Dual Boot
Apr 11, 2010
I want to dual boot kubuntu. I am a linux noob so have basically no experience with linux except what i have done of the live cd. My problem is that when I get to the part of the installer relating to partitions. It wont allow me to select the free space I have shrunk off my windows/data partition. it calls the space unusable and will not allow me to proceed when it is selected. Shouldn't the installer turn the free space into a partition for kubuntu to install to? The installer also show a bar wich marks off the partitions and how much each one takes up it does recongnize that there is free space because it tells me that I have 25 gb free.
View 14 Replies
ADVERTISEMENT
Apr 19, 2011
this is my first thread. Just installed Desktop Kubuntu Natty 11.04 x86_64 and have been amazed by its possibilities. I would like though to install a second OS which is free-ware and unlike Kubuntu but as powerful and userfriendly. Would anyone recommend the followinf?
FreeBSD?
Fedora?
Mandriva?
View 5 Replies
View Related
Jun 23, 2010
Having successfully installed kubuntu 10.04 on my Powermac G5 I was wondering if I can install os x and dual boot, there are plenty of tutorials around but all of them involve installing kubuntu on a system with os x already installed. If there is any danger of damaging Kubuntu then I will leave it as I really don't want to go through the hell of getting it working properly again! Also I have plenty of hard drives kicking about - would it be safer/easier to install os x on it's own hard drive? And if so how would things work with yaboot?
View 2 Replies
View Related
Jan 22, 2010
How to you mount a removable storage in Kubuntu 9.10 that is running on a dual-boot machine with Microsoft Windows XP.
View 4 Replies
View Related
Apr 8, 2010
I am trying to dual boot Kubuntu with an existing Windows 7 already installed. I downloaded the Kubuntu iso and burned it to a DVD. I changed the boot order in BIOS to accept the optical drive first. Kubuntu installer starts, I can select a language and can choose to install. However, the problem happens right after I select install. The screen goes dark and the blinking white tab disappears, nothing happens, and I can do nothing to trigger any response. Now, I have tried the alternative text-based installer and that works. I mean that it installs, but when I try to boot Kubuntu after the installation nothing happens and the same or very similar thing happens that occurred back with the non-text installer.
I don't know what to do or how to diagnose the problem. I thought it might be the boot loader or maybe the graphics card, but I'm not sure. I'm very new to anything Linux and I'm not the most computer savvy person.
I'm using a Gateway NV79 laptop
spec:
Intel Core i3 330M
500GB HDD
4GB RAM
Intel Graphics Media Accelerator HD with 128MB
View 3 Replies
View Related
Feb 18, 2010
I just bought a Dell 537s machine and configured it for dual boot of Windows 7 and Kubuntu 9.10. On my old dual boot machine I had the Windows System and the Linux System on different disk partitions. That way I could write fstab in such a way as to make the Windows System read-only as seen from Linux, so Linux couldn't mess up any Windows System files (and since Windows can't read ext3, Windows couldn't mess up the Linux System).
But the new machine came with Windows 7 installed and gobbling up 3 primary partitions. Kubuntu installed itself in such a way that Linux can read/write to the Windows System. This makes me nervous that Kubuntu might be able to mess up Windows 7.
Is there any way to make specific Windows 7 directories/files unwriteable as seen from Linux without altering their behavior in Windows 7?
View 1 Replies
View Related
Nov 20, 2010
My system has 2 hard drives, a 400gb master and a 250gb slave. sda (my main 400gb Windows drive) has XP on it. The slave (sdb) has 3 partitions:
sdb1 is for my downloads (NTFS ~180gb)
sdb2 has Kubuntu 8.10 installed (ext3, 60gb)
and sdb3 is the swap (3gb).
I want to do a destructive upgrade to Kubuntu 10.10 - I have the CD already and burnt. I know I have to select the partitions manually due to the complicated setup, I know I need to format the sdb2 partition to ext4, mount point /, and the swap can stay the same. On which hard drive should I install the bootloader? I can't remember where it is installed now, all I know is I had a lot of problems with the install.
View 9 Replies
View Related
Jan 19, 2010
I really hate to ask this. I have been searching for almost 2 days for a comforting answer but still not satisfied. I have a new Dell Studio 1555 64 bit system with Windows 7. I really like running dual boot systems and this is my first W7 machine. Is it vaguely safe to attempt to install Kubuntu 9.10 on this system? It still smells new and I'd hate to wreck it this soon, LOL. The vast amount of info on this forum along with the sheer number of posts makes it difficult to sift through sometimes.
View 1 Replies
View Related
Sep 19, 2009
I had Kubuntu 8.10 with KDE 4.0 interface and i decided to try out fedora to see if i liked it and wanted to eventually switch. i've done so many dual boot systems with Kubuntu and not had any problems that i decided not to back up my system this time before running the installation. after running the installation and shrinking my hard drive (200 gb) by 80 gigs, i rebooted to find that Kubuntu was no longer bootable. the first time i booted into fedora, disk utility popped up with a message that said "1 or more hard drives is failing". i ran the test that it recommended and found no problems. then i ran the longer test and still found no problems. i've rebooted a few times and have not been able to see Kubuntu in the boot loader options. if you need any more information i will be happy to provide it. my question, obviously, is how can i retrieve my Kubuntu partition. it is still there but is not bootable.
View 9 Replies
View Related
Jan 3, 2011
I dual boot windows 7 and Kubuntu on my laptop, my wireless card works on windows 7 no problem, and luckily the company also has a linux version of the driver. My question is, how can I install packages on kubuntu without a wired internet connection, and what packages should I download to be able to install the driver on kubuntu without getting errors?
My wireless card is Realtek 8192CE.
Here is the download page for the driver, in case I missed something.
I am dual-booting Kubuntu/Windows 7 x64bit.
View 8 Replies
View Related
May 20, 2010
I installed the latest nVidia drivers on my laptop using the 9800M card. The laptop is a Gateway P-7805u and I'm connected to the second monitor using VGA.Also, before installing the nVidia drivers (and just using the basic drivers included with Kubuntu 10.04), basic dual monitor support worked, except I could not enable compositing features for some reason. So I thought the proprietary drivers would fix this.Several issues have arisen since installation:
1) I've clicked through all of the display settings to activate the second screen with absolutely no change.
2) When I try to apply settings and Save Configuration as the nVidia help suggests, I am told that I cannot save to the X.conf file. I assume this is due to innate permissions on my user settings, which I have no idea how to properly configure.
3) I have no idea where to go from here, as most of the fixes I found online involve Linux syntax and verbiage, to which I'm totally clueless after spending over half my life with Windows.
View 1 Replies
View Related
Sep 7, 2009
I have a PC with three HD's. My primary hard drive has a single partition and contains Win XP SP3. I have a second hard drive which I use to store junk (pictures, movies, etc). The third, 60GB HD, I just put into my PC and I wanted to install Fedora 11 onto it. I want to have a dual boot system with WinXP being the default boot. I downloaded the latest build of Fedora 11, created a LiveCD out of it and I tried to install the OS onto this third new hard drive. I installed the OS, I told it to use the entire third HD and to have a dual boot setup and make the WinXP OS be the default boot. The installation seemed to go without any problems. However, after restarting the PC, the PC stops booting right after the DELL screen. It gives me a cursor and that's it. It just sits there. I have tried redoing the install about 4 different times now and no matter how I change the different installation options, I get the same result. Now I can't even boot into XP even after I disconnect the third drive. I am guessing that the dual boot got screwed up; I just don't know how to fix it and more importantly, how to install Fedora, dual boot.
View 15 Replies
View Related
Jun 29, 2010
It's been a while since I last installed a Linux distro on a machine that already houses another OS. I want to install OpenSuse (11.2) on a spare external drive that I have which will be connected to my PC through USB. The PC however, houses four other drives: one drive that has WinXP installed on it (NTFS) which is my normal boot drive, and three data drives - all NTFS.
Like I said, I want to install OpenSuse on the external drive through a network install. I don't want to end up with a boot menu where I can choose between OpenSuse and XP, I simply want to boot from the XP drive by default and boot from the USB drive when I tell my system to do so (I can call up a boot menu where I can tell my PC from which drive to boot).
Now I have done this many times - albeit too long ago to remember how I did it. I do remember however that last time I tried to do it, it installed a boot menu on my XP boot drive, and I had a hell of a time removing it. What do I need to look out for to prevent this from happening? How do I make sure nothing is changed on the other four drives? (The safest way would be to simply disconnect the other four drives from my system and install OpenSuse on the USB drive of course
View 1 Replies
View Related
Mar 13, 2010
i installed windows 7 successfully. When I installed it,I created 40 gb of unallocated space in the hard disk for the Fedora installation. However, whenever i start the partition editor during the Fedora installation, it says that there is no free space in your hardware, even though it shows 40gb space in the disk partition table.
View 5 Replies
View Related
Jun 30, 2010
I am planing to install fedora 13 on my dual boot (windows-7 + fedora) laptop. Previously some one helped me installing fedora on my laptop. Below let me mention the my file system architecture as the question is related to it. It's a 320 GB hard drive.
1. First 250 MB primary partition (used to be for /boot, which is currently unallocated, because in last installation I chose fedora to install automatically).
2. Next 120 GB windows primary partition.
3. Next 200 GB Logical partition
a. First 125 GB for windows backup
b. rest for Linux (500 MB + 60 GB).
As Linux was installed later thus it wrote the boot partition itself. I want the boot partition in the first 250 MB partition (reason, to be safe, I don't want to mess up with the master boot record while playing with Linux), also need to install fedora 13. The architecture I want is following:
1. first 250 MB: /boot
2. Next 120 GB: Windows
3. Logical:
a. First 125 GB: Windows backup.
b. Next 4 GB: /swap
c. Rest: /root -- I want to install Fedora here
So, what I plan to do is to whip out all the current Linux file systems and insert fedora dvd and install according to my criteria!
Now my questions are:
1. since currently Linux has the master boot record, will it cause any problem for the machine to boot up from installation dvd, if I whip off all the current Linux partitions? (Or in other words, does installation/ live-CD need a master boot record to boot? -- I am guessing once I reinstall Linux, booting is not a problem).
2. Once Linux is whipped off, can windows boot up automatically?
3. Is there any worry of messing up windows, specially its boot sector(off course I will take precaution not touching windows partitions!)
View 5 Replies
View Related
Apr 23, 2010
Have older system, self-built around 2000 or so. My plan is to optimize the system for speed and utility, upgrade the OS from W2000 Pro to XP Pro, and include dual boot so as to install some version/distro (?) of Linux to learn on. Present system: X86 based (32 bit), using a P4, 1.8 GHz/400 MHz fsb, with 512mb of DDR RAM installed, can upgrade to 2 gigs total.Shuttle MV42 motherboard, including onboard video and sound (S3 Graphics ProSavage DDR P4M266/VIA 8751/8233 chipset, VIA AC'97 Audio Controller, 2.2 compliant)
If I should decide to use the available 160 gig drive as a dual boot system, in order to install both XP and some version of Linux, how should I set it up? How many partitions will XP and Linux need or work with best? How much space for each OS? What file systems? Should I format/partition it with the existing W2000 OS? What comes first, the chicken or the egg? (XP or Linux?) I have read somewhere that it matters which OS is installed first, due to boot records being overwritten by successive OS installs. I plan to keep W2000 on the first HDD at least until I move my files over to XP. Will I need to switch the master/slave designations after installing XP and Linux on the new drive, since I will want to boot from that drive?
View 3 Replies
View Related
Jan 4, 2010
I have try to install fedora 11 with windows XP dual boot, but when fedora 11 is install, it will compeletly remove the already installed windows XP, while fedora 8, it works nice with windows XP, and is good dual boot OS at the same time.if any thing is new in fedora 11 or 12 with respect to dual booting,
View 2 Replies
View Related
Apr 21, 2011
I have a 160 GB Spaced 'HP Mini 1000' partitioned to two 80 GB drives. On one of them, Windows XP is already installed.
I would like to create a dual boot so that the other empty drive has Ubuntu Netbook edition 10.10.
I am a newbie with Linux, well versed with Windows and decided to venture with learning Linux by doing this.
So far, I have just downloaded the Netbook Edition from the following link.
[url]
How should I go about installing the Ubuntu netbook edition to dual boot with XP?
View 2 Replies
View Related
Apr 16, 2011
My Toshiba Satellite 5205-S705 laptop with Win XP Home sp3 has a non-working cd drive, is riddled with viruses, and isn't capable of booting to a USB drive. (please no comments about paperweights etc., it's all I have!) I want to install a Linux dual-boot version that is heavy on antivirus scanning support. Since I can't boot to an .iso disk, is there any other way to do this? I can transfer files to it via USB thumbdrive or download via Internet.
View 9 Replies
View Related
Aug 2, 2010
How do I install SDL (and other libraries) onto my dual-boot (XP/Xubuntu) computer? With only what came on the Xubuntu disk, I am able to play Oolite at what seems to be 1000 FPS, and Torcs at about 70 FPS.
View 6 Replies
View Related
Jul 6, 2011
Basically what it says in the subject. In the Allocate Drive Space part of installation theres 'replace Windows 7 with Ubuntu' and 'Something else' but nothing for installing them alongside each other, which I want to do.
View 14 Replies
View Related
Apr 29, 2011
Dual Boot Gone Bad I have been trying to set up a dual boot laptop on an old Dell Inspiron 2600. I got the machine cheap, and it is in excellent condition. I have upgraded the Bios to A11 (it was A4 when I got it) and put in a 40 Gig HD. It is maxed-out in memory at 360 Mb. It has the awful (by today's standards) Intel i810 video mess. I created an NTFS (primary) partition on the first half of the drive and installed XP, updated through SP3. I then attempted to install Debian 6 (squeeze) on the second half. I was unable to get anywhere with an installation using a squeeze Live CD. The screen just goes blank about 60 seconds into the installation, and everything freezes up. In rescue mode, I can get some screen play, but the rendering is awful and half of what you do is actually off the screen and you can't see what it is you are doing.
I hooked up a separate monitor, and was able to watch the installation just fine until it reached a certain point in the boot-up, then everything again went blank and the machine again froze up. I tried Ubuntu 10.10, Ubuntu 10.04 LTS, Mint 10, and Ultimate Edition 10.10 with varying degrees of success, but none completing and working.
The Ubuntu 10.04 LTS actually installed, but I could not get sufficient graphics in either a terminal (entered at the end of the install process just before re-booting) or booting to text only mode to sudo a change to the xorg.conf file that was native to the system, rather than to the installation package itself (which goes away when you reboot).
I was able to install 'squeeze' using the 'expert graphical install' mode under 'advanced options' (it lets you select a screen resolution when it starts the install), and when I got to the end of the installation, before re-booting, I told the system to open a monitor as 'root', and wrote what I thought would have been an appropriate xorg.conf file in the /etc/X11 subdirectory using nano (monitor and driver specs, as well as suggested xorg.conf entries obtained elsewhere on the web).
[Code]...
I'M SO CLOSE! Can somebody help me and tell me how to edit GRUB so it again recognizes the partition... or reinstall GRUB.... or let me know if the problem is with the XP MBR.... And if so, maybe hopefully lead me to how to fix THAT issue without screwing up the Debian install (I know this isn't an "UGH"- Windows forum). If worst come to worst, I can delete all the Linux partitions, use my Windows install disk to repair the MBR, and reinstall lenny.... Hopefully with GRUB not losing XP this time. I hate to do it because it has taken me a couple of days to get ANY form of Linux actually working right on this machine..... but at least I know how to do it now and what distro will actually work.
Also, anybody with a clue as to why squeeze won't boot after what appears to be a successful installation (with the above-listed xorg.conf file in place) and what I can do to fix that issue would also be appreciated. It will be nice to have a system installed that has current support next year.
View 6 Replies
View Related
Jan 5, 2011
I just received my Slackware 13.1 & the 'Official Guide to Slackware Linux' book. I know that there is a big learning curve to use Slackware and that is why I purchased it - according to Distrowatch, "...if you learn Slackware, you learn Linux!" But, while I am 'learning Linux', I would still like to have a linux distro installed that would be more of a 'no-brainer'.
So the question is, which distro should I install first, Slackware or say, OpenSuse? I know that if I were going to dual-boot with XP, that XP should be installed first - does order matter for 2 linux distros too? Also, are there any points to remember to do during the installation processes so that I end up with a working, dual-boot computer?
View 7 Replies
View Related
Dec 11, 2010
I did install Kubuntu 10.10 LVM Encrypted from Alternate CD on dual boot XP with Ubuntu 10.10.http://members.iinet.net/~herman546/p19.html My problem is,that when installation asked me for where to put GRUB I didn't type anything because I have GRUB2 already installed. Now it won't boot. Tried Bios to set USB as 1st boot,and HDD as a 2nd option. It went to 2nd option,with GRUB2. So I hit "c" and "ls" showed only HD0 and HD1 (HD has 2 partitions,1st XP and 2nd Ubuntu 10] and no SD found. How can I fix this? Installation took for hours,would be nice to fix it without reinstalling it again
View 6 Replies
View Related
Mar 31, 2010
XP Pro SP3
Ubuntu 9.10
Kubuntu 9.10
Tri-booting. They were installed in the order I listed above. I ran into a few bugs with Kubuntu, so I no longer want to use it. I want to use GParted on a LiveCD to format Kubuntu and expand my Ubuntu home partition to sit on top of Kubuntu's space right now. If I nuke Kubuntu, will Grub still exist with my Ubuntu/XP entries to boot?
View 4 Replies
View Related
Jun 11, 2010
I have installed latest kubuntu (10.04) on sda7, ext4 , and i selected the advanced feature of the installer to install kubuntu bootloader on sda7. 11.1 is on sda5 .First , it destroyed my 11.1 grub bootloader on mbr . I managed to restore it with the 11.1 installation DVD. Now i try to boot kubuntu from the sda7 bootloader, without success . I searched the forums and tried some hints i found but found no similar problems. Here are the different entries i tried on grub (mbr) , content of the /boot/grub/menu.lst :
Code:
# Modified by YaST2. Last modification on ven. juin 11 15:41:32 CEST 2010
default 0
timeout 3
gfxmenu (hd0,4)/boot/message
##YaST - activate
[Code]...
View 9 Replies
View Related
Jan 6, 2011
it started with rooting my Motorola Droid. I got quite interested in the whole rooting/linux "world". The only problem is, my hands move A LOT faster than my brain does. I'm an "educated novice" at best when it comes to all of this and still learning slowly, but surely. I followed an online tutorial and before I realized quite what i'd done, I had dual installed Ubuntu linux 10.10 on my laptop. ISO'd this, partitioned that and realized....i'm in way over my head. Then I started researching how to just go back in time and get my "safe" windows vista back until I'm ready to make the switch to linux and just ended up getting more confused.
How do I actually BOOT into Windows on a dual boot computer that I apparently just created? How, if need be, do I undo everything I just did in the past few hours and careless tinkering? If I decide to stay with Linux, how do I get my damn wireless router to recognize?
View 9 Replies
View Related
Feb 14, 2010
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
View 4 Replies
View Related
May 26, 2011
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
View 4 Replies
View Related
Sep 25, 2010
I have recently installed Ubuntu 10.04 on a Compaq Presario V3000.
To prepare the install, I freed about 15 GB of space, booted from an USB. I chose "use largest continous free space" when it got to that point and then proceeded with the rest.
Now when I choose vista it will not load properly, here's what happens:
1.Windows says loading windows files.
2.After a while, I have to choose a language.
3.Windows looks for operating systems to repair.
If I choose not to, it will take me to a menu where I can choose to fix boot problems, command line, etc...
Linux is running very well, vista is the problem here, I have a recovery disk*, but I wanted to ask you guys if that is the correct move. I really need to keep windows to run some windows only apps.
*This disk was burnt on another computer, an HP from a friend who has the same vista edition. Will this work? This computer's burner is broken..
This is actually something for my gf, she has an account on my computer(only ubuntu on it) and uses it often (Mendley, Zotero, and sciency things in general). She loved it and asked me to install a dual boot with her win system. She use SPSS for whatever kind of statistical analysis it does and she likes ms office better then open office, and I would like to leave her with the choice....
View 9 Replies
View Related
