Fedora ::installed Fedora 15 KDE (with Dual Boot Win7) On Computer Has Blackened Out
Sep 4, 2011
I have recently installed Fedora 15 KDE (with Dual Boot Win7) on my computer:Dell Optiplex 330, Intel Core2Duo- 2.53 GHz, 32 Bit, 2GB RamnVIDIA 8400 GSWhile going through the Guides mentioned here: for F15, I tried to install nVIDIA Drivers after updating the Kernel.suyum update kernel*rebootHowever it gave me some errors and then I did try the following method (as described in Missingbox studio guide)su -yum install akmod-nvidia xorg-x11-drv-nvidia-libs.i686 bootconf-gui kernel*develfollowed by Reboot.
I start my computer, I get the screen which shows that Fedora will boot in 3 seconds. This is followed by a black screen with a "Blue followed by white" Bar running towards right (where Fedora 15 is written)....It stays there for ever (I waited for 3 hours and then switched off my computer).Presently I am writing this post through Windows7.Is there any way I can repair Fedora through Win7 or by any other means.---------- Post added at 10:57 AM ---------- Previous post was at 10:51 AM ----------I remember the instructions (given by leigh123linux) that we should provide the following information
rpm -qa *vidia* *kernel*|sort;uname -r;lsmod |grep -e nvidia -e nouveau;cat /etc/X11/xorg.confI had it saved as a .txt file in my home folder.
View 8 Replies
ADVERTISEMENT
Mar 4, 2010
I'm a F11 user and I wanted to see the new Windows 7 and right now, the computer doesn't boot via grub.
View 2 Replies
View Related
Nov 8, 2010
I install Fedora 14 32bits the same way I install Ubuntu. First, make unallocated space for it (about 150Gb). During the installation setup, I select "use all continuous free pace" as partition option, coz it's fastest and easiest. /dev/sda/ is selected as location for boot loader, and leaves Fedora as default boot target. Installation process goes very smoothly, but when the system restarts. The computer boots up as if Fedora has never been installed, it goes straight to Windows7, No GRUB boot loader menu whatsoever.
troubleshooting attempt #1: at first I thought it maybe the GRUB compatibility issue between 32bits Fedora and 64bits Win7. So I tried out 64bits Fedora, doesn't work.troubleshooting attempt #2: then I tried to install the boot loader on the Linux partition (first boot sector of boot partition) and let Windows 7 controls the startup menu by using FreeBCD.
View 6 Replies
View Related
Jun 18, 2011
I installed fedora aside of windows 7 home premium 64 so I can choose which one to star. But its always fedora I set bios to boot from the cd drive and yes it ask me hit any key to boot from the cd so I can reinstall windows 7 but it's fedora again. It happens the same with the USB drive. I think I don't need to reinstall Win7, it's there in Hard Disk. I am new in Fedora (infact I installed Fedora today in the morning).
View 1 Replies
View Related
Feb 2, 2011
I had experience with earlier Red Hat Linux dual boot with Windows 98 and XP. I now have Fedora 9 and also a Compaq Presario CQ61 with Windows 7 Home edition. I have made it so that my Laptop now boots from its CD/DVD drive instead of the hard drive which it was. Only so far when I run Fedora's 9 Desktop Live CD everything seems OK until I get to a non graphics window for logging in and there I am stuck.how I am going to log in and go into Linux Fedora's windows view.
View 3 Replies
View Related
Oct 29, 2010
So I decided to try something new and fresh. I wanted to try ubuntu. So I download the 64bit version from here. I made a 25GB partition. I then Wubi found out I didn't need the original file since it was downloading something else. I installed it, rebooted.
Windows comes up with a prompt:
Boot from:
Windows 7
Ubuntu
I click on Ubuntu. This comes up: [URL]. I am fairly new and I don't know what to do. I did research and nothing really showed. I then burned the said 64bit version and tried to do a Live CD but it didn't reboot into ubuntu. I really want to try ubuntu? I am going to re-install again.
View 8 Replies
View Related
Feb 7, 2010
I am a major noob to FC12. I need to install Windows 7 Pro and FC12 dual boot. I first used the windows CD to create 1 250 Gig partition on my 500 Gig HD. Of course windows created the 100 MB system partition. I left the rest unpartitioned. Windows installed okay. I then booted to the KDE FC12 Live CD and installed FC12. I specified to use the Free Space remaining on the HD. The installation finished but now only boots into FC12 and does not prompt me for the OS I want to boot.
View 3 Replies
View Related
Oct 5, 2010
I installed Fedora13 to dualboot w/ my windows 7. I quickly found out that I don't care for fedora. I was referred to Ubuntu, and put Ubuntu 10.04 on in VirtualBox. Lo and behold, I like Ubuntu a WHOLE lot more! So, I promptly went to Disk Manager (in win7) and deleted the Fedora partitions (told you i'm a noob). Of course that was a poor choice, and I was only able to get my computer to boot again by reinstalling f13. neat.
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
SO what i was thinking is go back to Disk Manager, delete partitions sda 3,4, & 5 (the linux ones), then reboot from the Ubuntu live disk? But I don't know what the sdb1 partition is?
View 3 Replies
View Related
Jul 5, 2011
I just installed Fedora15 on my laptop. When the installation completed, the system rebooted and gave me a Grub Error 17. I logged in the rescue mode and got the following output from
Code:
fdisk -ls
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0d8b0d8a .....
View 5 Replies
View Related
Oct 9, 2010
I had Windows Vista Business in my compaq presario CQ40-145 TU laptop, over which I installed Fedora 13, making the system dual boot. The Windows is set to be the default OS. Now I want to replace Vista with Windows 7 professional without affecting Fedora. As far as I understand, during boot up, the system enters Fedora's booting process and then gets redirected to Windows, and it is not directly windows even if the default OS is windows.
The reason behind not disturbing fedora is the updates, extra software and packages installed and the pain and time it took me to make my speakers, wlan and flash player work in it. I even don't remember the exact process of what I did. I don't have now so much time to search for it again. So I will take up only that way in which Fedora is not affected at all. And the second problem is my DVD drive is not working at all. So I'll like using USB stick for the same.
View 8 Replies
View Related
Jan 26, 2011
I have one computer with windows 7 (computername = windowspc) connected through a modem router to a computer running Ubuntu 10.10 (computername = linuxpc). Had Samba setup and working between them.
Decided to check out Fedora 14 (computername = linuxpc). so set up dual boot on the on the Ubuntu box and installed samba. When Fedora is running Win 7 only sees shares for Fedora. If Ubuntu is running win 7 cannot connect to any shares stating a bad file path. I understand that both linux oses use the same ip address and thats probably were Win7 must have problems.
Ran nbtstat r in windows and was able to swap the situation around i.e. win7 sees Ubuntu but not Fedora.
I would like to be able to set it up so that when logged on to either of the linux oses I would be able to see shares from both partitions in Win7. Or if thats not possible, to differentiate them in some way so that Win7 would recognise which os was running and display the shares accordingly.
View 4 Replies
View Related
Aug 27, 2010
Partition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
View 14 Replies
View Related
Nov 18, 2010
how to dual boot XP, Win7 and F13? I ask this because I tried it a few weeks ago and I couldn't boot into XP. I installed XP, Win7 and Fedora in that order and when I tried to boot into XP from grub I got the message Code: Boot Mgr not found. Press Cntrl-Alt-Del to restart
View 5 Replies
View Related
Oct 1, 2009
I just noticed that there is an icon on my desktop that is named Filesystem, it is the Windows XP portion of the hard drive. I don't remember seeing it on the desktop, I only noticed it 15 minutes ago after installing Adobe flash player. Is that icon supposed to be on my Fedora desktop?
View 6 Replies
View Related
Apr 23, 2011
i installed ubuntu after windows 7 but now i cant boot windows 7 i tried the start up repair and I've read through some questions answered on here and int figure out the problem i don't want to uninstall ubuntu unless it's my only option
View 9 Replies
View Related
Sep 19, 2009
I had Kubuntu 8.10 with KDE 4.0 interface and i decided to try out fedora to see if i liked it and wanted to eventually switch. i've done so many dual boot systems with Kubuntu and not had any problems that i decided not to back up my system this time before running the installation. after running the installation and shrinking my hard drive (200 gb) by 80 gigs, i rebooted to find that Kubuntu was no longer bootable. the first time i booted into fedora, disk utility popped up with a message that said "1 or more hard drives is failing". i ran the test that it recommended and found no problems. then i ran the longer test and still found no problems. i've rebooted a few times and have not been able to see Kubuntu in the boot loader options. if you need any more information i will be happy to provide it. my question, obviously, is how can i retrieve my Kubuntu partition. it is still there but is not bootable.
View 9 Replies
View Related
Oct 18, 2010
I have searched and read threads about the Bitlocker, grub and TPM issues that might show up, but I can't draw any conclusions as some information contradict each other. To make sure I don't screw up my pc as thought I need to make a new post.
At work I'm supposed to run Windows 7 and encrypt the win-partition with Bitlocker. I have installed Windows, turned on the encryption and it ties into the TPM. But as I am moving over to the *nix department I want to run Ubuntu as dual boot to check everything rusn fine with all the systems I need. Before I installed Windows I partioned the disk:
1,5 GB for system/bitlocker requirement
147 GB for Windows, C:
85 GB which is empty where I intend to install Ubuntu (not formated yet)
I boot into Windows with my bitlocker/TPM key on an USB-stick. Without the usb-stick the pc won't boot. Now, before I try to install Ubuntu I want to make sure to do it the right so I don't mess up the Windows installation or won't be able to boot the pc at all.
There seem to be several "schools" to this. Some suggest I should have installed Ubuntu first, then Windows and then encrypt. Some say, no worries just fire away and install since you are not planning to read the windows-partition from Ubuntu. Or an alternative, install but make sure to deactive the encryption during installation. Some say, install but make sure grub is installed in (multiple choices) location.
View 9 Replies
View Related
Feb 14, 2010
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
View 4 Replies
View Related
May 26, 2011
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
View 4 Replies
View Related
Apr 29, 2011
So we install Windows 7 home premium. Then in goes the Ubuntu Disk. Ubuntu seems to think that the windows 7 partition is one big lump of unallocated space. Tried multiple re-installs of Windows 7, all concluding the same. A bit of googling told me that it has something to do with partition tables or something. I even tried to use Gdisk to delete Gpt from the windows disk, which - as I have absolutely no idea what any of it means, - resulted in me screwing up the entire Win7 partition hence win7 not being able to boot anymore.
i've seen on the internet include a lot of technical garble which I don't understand. I've been using Linux for a while, but as far as partitioning and dual booting is concerned, it's always gone smoothly for me up until now
View 1 Replies
View Related
Nov 16, 2010
I've installed Ubuntu 10.10 (64bit) next to my Windows 7, in SSD hard drive. I'm able to boot Ubuntu with no problem, but my problem is my Windows. When I try to enter windows 7, all I get is a black screen with one blink char, and from there it does nothing...
My PC:
cpu i5 760
4gb ram
mb gigabyte GA-P55A-UD3
gpu gainward nvidia gtx 460
View 1 Replies
View Related
Mar 21, 2011
I have the option of selecting between win7 and Ubuntu during start up, but when i select Ubuntu it goes to the first 2 lines of command and then restarts again. Windows 7 works fine. This is the second installation of ubuntu on this computer, the first attempt did the same thing (would not boot into ubuntu but win was fine) after i lost power. This time i shut the computer off for a full week while i was on vacation. I have switched between windows and ubuntu a couple of times and had no issue with this installation.
HP Pavilion
AMD AthalonII X4
8GB ram
1TB HD
AMD HD 4550
64-bit windows 7
wubi
Ubuntu 10.04LTS 64-bit
All stock and at cool temperatures.
View 2 Replies
View Related
Dec 15, 2010
I cannot boot into the Windows 7 partition, which I guess is /dev/sda1. I have Slackware installed on /dev/sda2 which boots fine, my /etc/lilo.conf looks like
Code:
/etc/# Start LILO global section compact
[code]....
View 2 Replies
View Related
Mar 1, 2010
I want to dual boot with windows 7. How would I go about making a partition etc.,. for windows? I know how to dual boot other OS's off of windows but not linux. I just want to dual boot with ubuntu and windows 7.
View 3 Replies
View Related
Jan 22, 2011
My wife wants Ubuntu dual booted on her new Acer laptop which has Windows 7. My question: Is 10.10 stable enough to put on her computer? We have used Ubuntu for a number of years and have always stayed current with upgrades, but I have become leery lately of rushing into new versions of Ubuntu. I had too many problems when I upgraded to the last couple of times. I'm inclined to put 10.04 on her computer unless I can be assured that 10.10 is good to go. Or would I be well-advised to move back a version or two?
View 3 Replies
View Related
Jan 13, 2010
I bought a new computer (laptop HP DV6-1375dx) and I want to set a dual boot with win7, like I did with my desktop (clean install) However, my question is, with the new laptop all I have is the rescue disks vs. having the single OEM version. IS that a problem? for the desktop I followed lifehackers article "Dual boot win7 and ubuntu in perfect harmony." no problems at all.
what I am afraid of is formatting the new hard drive and the recovery partition and not being able to use the disks for some reason....am I over-reacting?
View 9 Replies
View Related
Jun 5, 2010
Currently i am dual boot win7 and ubuntu, and the win7 is installed first in C drive, then ubuntu 10.04 is installed in D drive, my question is can i uninstall win7 and just keep the ubuntu on my machine?
View 9 Replies
View Related
Dec 6, 2010
There was windows 7 Home Basic pre installed onto Hcl Desktop at my Office, then I installed ubuntu 10.04 to it, everything was ok untill I restarted. When I select windows 7 from dual boot, it takes me back to dual boot grub page. So I did inserted Windows 7 cd and restored windows by this
Code:
bootrec.exe /fixboot
Now only windows 7 is working and booting. I want ubuntu 10.04 on the dual boot, how and what is exact method of recovering ubuntu without harming windows 7? Is it with ubuntu 10/04 cd?? If i do live cd and restore grub, will windows 7 work?? I haven't given any details of hd0 and root, i'll manage, just tell the procedure.
View 2 Replies
View Related
Jan 28, 2011
Should I first partition my HDD using partitioning software (Gparted ETC.)? I have Win7 as my primary but I just want some sort of linux OS on my laptop. I only want to give it 30GB, and I checked the partitioning helper that ubuntu 10.10 has on its installer and quite frankly, it sucks.
View 1 Replies
View Related
Feb 4, 2011
i need win7 to run a rip software for my new roland printer, but i want to use and learn ubuntu for personal use. i tried installing win7 then installing ubuntu next to it. now when i start the laptop it only starts ubuntu and there is no option for win7.
View 9 Replies
View Related
