Not a major issue but my Ubuntu boot screen change to the old classic Orange theme after i installed Kubuntu on a different drive and ofcourse a new Grub loader as the Kubuntu installation prompted. It can't be because of the Kubuntu installation but i can't find any other reason for that to happen.
View 3 RepliesI just installed Fedora 11 (I installed over the Fedora 10 installation I had already installed)..
-Before I would have Grub give the choice of Fedora 10 or Windows (Where Windows would load the Win Boot loader for my options of Windows 7 and Windows Vista)
-NOW: I have the same options.. But when i select Windows (It loads the Recovery partition) instead of the Windows Boot Loader...
Here is my fdisk -l
Device Boot Start End Blocks Id System
/dev/sda1 1 192 1536000 27 Unknown
Partition 1 does not end on cylinder boundary.
/dev/sda2 192 5414 41943040 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
code....
I have installed Windows Server 2003 after CentOS. Then GRUB boot loader lost. Is there a way I can install GRUB boot loader from Windows?
View 2 Replies View RelatedI'm using Ubuntu 9.10 Dual boot with Windows Xp. I can't boot my Ubuntu, I received grub error message during startup. I've installed back grub with below command, but still I can't boot into Ubuntu. I've been prompted to sh:grub> upon starting the computer.
[code]...
but I stucked at second line, it said "no such disk". I've also ran the bootinfoscript, and here is the result:
[code]...
I have just updated to 10.04 on my Dell Insperon 8200 laptop, and all seems well with Linux.My problem is that although it shows in Grub Windows XP will not load. I just get a blank screen with a flashing cursor.I have tried to grub-mkconfig and grub-update, both of which reported successful results.However on reboot I still get a blank screen for windows.This was not an issue with 9.04 and 9.10.so I don't think it is the machine.
View 5 Replies View RelatedI was installing sqeeze i386 on my laptop VOSTRO 1400 and got this the 'grub-pc' package failed to install into /target/. without the GRUB boot loader, the installed system will not boot.
View 3 Replies View RelatedWhen openSUSE was installed, GRUB information was installed in the Extended partition rather than in the MBR.
I have a triple boot system: Windows XP Pro, openSUSE, and another popular distro on Linux. The other distro put GRUB info in MBR. Now when I boot up it goes to member first. If I select openSUSE, the GRUB info in the extended partion is accessed and a 2nd selection screen is displayed.
I tried reloading the GRUB data for openSUSE selceting to install it in MBR but this does not seem to work.
How do I get rid of the GRUB stuff in the extended partition so that the 2nd GRUB screen does not get displayed?
I have a dual boot Vista/ Kubuntu and my vista SP2 has made both my vista and kubuntu unable to boot completely. I've been through many steps to recover vista but no restore point works and such so I am going to use my Toshiba recovery partition to reinstall but what I'm wondering is if after I do that will the grub loader be affected and give me the error 22? The two are on separate partitions and I've been meaning to get rid of Kubuntu from my laptop since I have it on my pc
View 1 Replies View RelatedI have a laptop with windows vista installed on the internal hardrive.Last March I installed wanted to start to use linux so I brought a separate external hardrive partitioned it to enable media storage on one section and installed ubuntu on the other half. It works fine and so does the windows vista on my internal hardrive, however I have to have the hardrive plugged in to boot.Until now this hasnt bothered me, however I've recently started to take my laptop into university and cannot switch it off unless I have the external hardrive with me as I cannot switch it on without it.With it plugged in it loads up GRUB and then gives me the option to load either Ubuntu or windows vista, however if it is not plugged in when I power up it says GRUB loader failed.It also occured to me that if for some reason my external hardrive fails in the future I wont be able to use my laptop anymore.Has the installation of ubuntu (and GRUB) altered the MBR?
Is there some way I can edit the settings so that I can load windows vista without the hardrive plugged in, and then if it is plugged in I get the choice which one to load?
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View RelatedI installed fedora 12 to a 4GB flash usb flash drive. When I reboot and select windowsxp, grub displays a blank screen and hangs up.
[root@localhost Terry]# fdisk -l
Disk /dev/sda: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x41ab2316
Device Boot Start End Blocks Id System
[Code]....
I have installed Ubuntu 10.10 Minimal on a 2GB USB using CLI and it is working very well after I added a few things. I intend to use it on machines other than my own. But the GRUB boot loader was installed to the main system on my machine and it is booting from there.
During the installation it was said that the bootloader can be installed on a floppy. So I started a new 2 GB stick and tried to install the boot loader on a floppy but my computer does not recognize floppies anymore (seems to be a wider problem with recent distributions).
So I tried to install the bootloader on a different USB stick and and this also did not work. Cannot find recent and relatively easy way to install GRUB boot loader to a stick.
I installed Ubuntu 11.04 64-Bit via Wubi but it seems that when I turn on my machine I first get the Windows Boot Loader, when I select Ubuntu from the list it then goes into GRUB with the option to select Ubuntu or Windows. Is there any way to change this so only GRUB is used?
View 3 Replies View RelatedI have XP, Win7 Pro and F 11 installed. Before I installed F 11, Win 7 boot mgr was working fine. I then installed F 11 and I went to System/Admin/bootloader to edit it and it wouldn't bring up the boot loader. In the attachment was the error msg. Now my only option when I boot up is F 11.
I do not have access to the Win 7 DVD only the F 11 install disk since I am on a fishing trip and need to use Win 7. How can I repair to the grub boot loader to boot into Win 7?
What I like is to install Fedora13,Win7,WinXp, and Musix. One HD 1.5TB Ilike on that is win7 and Fedora13,the other one with 400GB WinXP and Musix. What should I do so I can setup on GRUB. How can I set up like that.
View 2 Replies View Relatedi installed it on a external HDD. my primary OS is windows 7 on my 1 internal hard drive. After i installed ubuntu whenever i boot up my computer i have to have my external hdd plugged in and turned on or else i get "cannot find GRUB" then some rescue thing comes up where i can type stuff. i would just like to move the GRUB loader to my primary hard drive or at least recover my windows loader but have ubuntu on it.
View 9 Replies View RelatedI have installed Linux mint and it failed on grub, if I press something grub crash, tired of that I install Ubuntu but my surprise was the same problem on grub, I was thinking if grub2 was the problem, so I tried grub legacy and was the same x_x
I remember use a old version of ubuntu with lilo (or was opensuse) but it works! but neither last ubunt nor mint with grub
Grub loader: select OS If I press ANY key it crash, if I wait the 9 seconds it enter to default OS (first option)
Note: It is neither PS2 nor USB keyboard, it's a laptop keyboard, a Compaq presario 2100
Note 2: I don't speak english very well ^_^
I tried to install linux on hard disk and it installed without any problem. However, when i boot i directly get the windows boot loader screen and no grub screen. I reinstalled linux. I tried to fix grub, but still no grub screen.
View 4 Replies View RelatedI installed Ubuntu 11.04 on a separate partition, with Grub being in it own partition. When I start the PC only windows Xp is available. So how do I get grub or Ubuntu load with windows xp boot loader? I tried with Live cd, the sudo grub but then it says command not found. I think its because Ubuntu 11.04 uses grub 2.
View 1 Replies View RelatedI'm having a problem installing Ubuntu Studio 9.10-alternate-amd64 onto my machine. This is the third attempt and I keep running into the same problem. Grub Boot Loader will only install to 16% when a screen pops up:
Ubuntu Installer Main Menu
Choose the next step in the install process:
choose language
configure the keyboard
detect and mount CD-rom
etc...
choosing the option "Install Grub boot loader on a hard disk" sends me back to the Grub install and once again at 16% the Ubuntu Installer Main Menu pops up. Choosing the option "Install the Lilo Boot Loader on a hard disk" resolves in an Lilo-install failure and i'm directed back to the Installer Main Menu. The option "Finish the installation" sends me back to the same menu..I'm stumped as to what to do... a disk check ensured me that the instal-dvd is valid though I can't get past this silly install menu.
I've had to give up trying to install linux. It just won't work on my machine, a Presario 6370us that has been upgraded over the years such that it is not compatible with linux, apparently. (You can read my travails elsewhere on this board; thanks very much to all who tried to help.)
Now, how do I remove the GRUB boot loader from my system? I need the system to boot directly to Windows XP.
I can't start linux in any way, shape, or form, so I need to either edit GRUB inside the GRUB environment itself, or to do so from Windows.
Ideally, I'd like to remove GRUB entirely. Failing that, I'd like to edit the GRUB config file so that only Windows is an option. Failing that, I need to make Windows the default OS.
I successfully installed Fedora 11 from the DVD iso. At the end, the installation program prompts me to reboot the system. But when the boot loader appears after rebooting, there are only the old entries.
I have 2 IDE disks and one sata disk. The first IDE disk is hd0, the second IDE is hd1. The SATA disk is hd2. In the setup, I selected hd0 to install grub. Fedora 11 was installed on the SATA disk (hd2).[edit] I forgot to say, that Fedora 10 is on /dev/sda and Fedora 9 on /dev/sdb
I have Windows 7 and Ubuntu 10.04 dual-booted on my machine. grub was aautomaticlu installed as the primary loader. Soon i want to nuke my ubuntu partition but i know that will delete grub. Can i remove grub or at least make Windows boot loader default.
View 2 Replies View RelatedI am a brand new Ubuntu user that just tried to install on an old PC using the 10.10 desktop edition.During installation, I hit an error that the bootloader could not install, and after reading about it on the forums, opted to attempt to install it manually after. I have followed the tutorial located here,[URL].. on reinstalling GRUB2 from the liveCD, which I assume means to boot with the installation CD and select try Ubuntu (given the only other option is install, which I have tried twice) everything up to step 5 in that tutorial seems to run successfully, and I am given a message it is installed, but then when I reboot the system it does not open the GRUB2 menu, rather the CLI interface, which suggests there is no grub.cfg
So I am unable to refresh at the GRUB menu because that command is not recognized by the CLI (and it may not help if I am missing files, so I might have screwed up reinstalling them in step 5, or maybe the "Try Ubuntu" terminal doesn't alter the computer like I thought?)
I am a new Ubuntu user, and I am attempting to set Windows 7 64 bit as my default OS in the boot loader instead of Ubuntu 10.10. I have entered the command gksudo gedit /boot/grub/menu.lst into terminal, and the menu.lst file does open. However, this file appears to be completely blank, which does not seem to make sense and is preventing me from changing the boot order.
View 4 Replies View RelatedMy system has 2 hard drives, a 400gb master and a 250gb slave. sda (my main 400gb Windows drive) has XP on it. The slave (sdb) has 3 partitions:
sdb1 is for my downloads (NTFS ~180gb)
sdb2 has Kubuntu 8.10 installed (ext3, 60gb)
and sdb3 is the swap (3gb).
I want to do a destructive upgrade to Kubuntu 10.10 - I have the CD already and burnt. I know I have to select the partitions manually due to the complicated setup, I know I need to format the sdb2 partition to ext4, mount point /, and the swap can stay the same. On which hard drive should I install the bootloader? I can't remember where it is installed now, all I know is I had a lot of problems with the install.
I have an HP Pavilion m7480n PC with Windows XP installed on the C-drive. I successfully installed FC 12 onto the spare USB drive. When I rebooted the PC all I got was a blinking underscore at the extreme upper left position of a totally black screen. After a bit of experimenting I found that if I hit the F1 key during the boot process, go into the BIOS setup, do nothing within the setup, and press ESC to get out of the setup then the PC will go back into the boot cycle a second time. During the second time however a small text message appears with words to the effect "Press any key to enter GRUB..." after which the GRUB splash screen comes up with the choice for FC 12 or "Other" (referring to Win XP). At that point I can boot into either one.
View 4 Replies View RelatedI have a Laptop ( Samsung R510 Driton (Aura Series) with Win XP installed, and wanted to install fedora 10, too, as i really want to test a few things in linux and get a little knowledge there....
I Installed fedora with his guide: [url]
And as for Dual boot i also read this guide: [url]
I created root, home, swap (8 gb), usr, var all in all about 100 gb (i know its much, but i have enough space :)
After the installation, fedora wanted to restart my laptop, i let it restart and GRUB came up, i chose "fedora 10" pressed enter and the laptop just restarted....did the same thign again, andn ow fedora was about 2 secs in the loading screen and then restarted again....i've chosen windows and the laptop isj ust restarting...i tried windows again and windows is loading ....but i dont get in fedora 10....
Here are the specification of my laptop:
Quote:
I am trying to boot kubutu from FC10's grub. FC10 is in MBR, installed kubuntu without grub. Is that a problem for me now? I mean, should I need to install kubutu grub in order to boot from FC10 grub? I tried with these methods but nothing works:
title Kubuntu 8.10 Linux
chainloader +1
title Kubuntu 8.10 Linux
[code]....