my main problem is :
1. I have 4 GB of DDR3 RAM but ubuntu shows only 3GB available.
the result of free are :
Quote:
total used free shared buffers cached
Mem: 3086992 985428 2101564 0 61212 488768
-/+ buffers/cache: 435448 2651544
Swap: 7812092 0 7812092
I'm wanting to update my existing 1GB Kinsgston 240 pin DIMM memory to 2GB or more. Can I keep my existing IGB and add another from a different manufacture? Will they match or should I just get new memory? What is available is DDR3 and DDR2. Guess what I'm asking is I have two memory slots total one will have the existing 1GB and I want to add at least 1GB more, does the DDR3 or DDR2 matter? Or is it all about the 240 pin config?
View 4 Replies View RelatedI have an amd phenom II 9950 125 watt am3 cpu, and 16GB of ddr3 1066 ecc registered 4x4G dimms.I am trying to find a motherboard that works with this memory.I like the reliability of ecc, and I want ot use it.
View 5 Replies View RelatedThis is really not a Linux or SuSE question. However, the folks on this forum are polite and knowledgeable, so I will give it a try.In the process putting together a new computer.About 99% confident in the following:otherboard: ASUS Crosshair IV FormulaCPU: AMD Phemon II X4 955Graphics card: Gigabyte GV-R685D5RAM: Unknown. ASUS, as well as several other motherboard suppliers, have not approved of any 1x4GB DDR3 RAMS. Has anyone had success with getting a 1x4GB DDR3 RAM to work on the ASUS Crosshair IV motherboard?
View 2 Replies View RelatedI had this card on Ubuntu 10.10 and Mint 10 and with the video card driver installed, all movies where playing like I had a video card with 1 MB. When I was using the os generic video card movies played more better than with the video card driver enabled, but with the generic driver I did not had any graphic effects.Will CentOS use proper the nvidia driver or not?The video card is made by Gigabyte but has the nvidia chipset.
View 1 Replies View RelatedMy connection manager shows wired connections and shows wireless as being disabled. here is some terminal info getting wireless going?
Here is a bunch of things I have tried and the results.
nixon@nixon-desktop:~$ sudo ifup wlan0
Ignoring unknown interface wlan0=wlan0.
nixon@nixon-desktop:~$ sudo ifdown wlan0
ifdown: interface wlan0 not configured
[Code].....
I'm encountering a strange problem. I need to open and forward all UDP and TCP ports related to VoIPtelephony (5000:32000) in the Suse 11.1 server that's acting as router/firewall in our setup. The ports must redirect to a Asterisk server in the local network. (This server has the IP adress 192.168.0.3)I've opened ports in Yast (Firewall>Ports>Advanced) and putted in some masquerading rulesirewall>Masquerading):0/0,192.168.0.3,tcp,5000:31000,5000:310000/0,192.168.0.3,udp,5000:31000,5000:31000when I do a nmap localhost I get:Starting Nmap 4.75 at 2010-01-08 16:52 CETInteresting ports on localhost (127.0.0.1):
Not shown: 991 closed ports
PORT STATE SERVICE
21/tcp open ftp
[code]....
I have just installed ubuntu 10 on a thinkpad t410. At first everything worked swimmingly, INCLUDING the wireless. After about five minutes, the wireless stopped working, in that it seemed to think it was still connected but pinging didn't work. I've now restarted several times, and each time I restart, the wireless works for about 1 minute, then stops working. If I try to disconnect and reconnect it will not reconnect (until I restart, that is).
iwconfig shows the correct ESSID and ifconfig shows an address, and "connection information" shows a varying percentage of connection.
Last time my Pc was automatically shutdown due to problem in light,now when i turn it on,it shows me the given message after ubuntu loads,No init found,try passing inti=bootargwhat can i do now..?it don't take it to my login=screen..
View 3 Replies View RelatedI'm running Ubuntu 10.04, and I recently have wanted to start changing some of my taskbar items around. The problem is, when I go to right-click on the taskbar, all I can see are the "Help" and "About" menu options. No preferences, no options to get rid of a taskbar item, no options to add a taskbar item.
View 4 Replies View RelatedProperties of SD card now shows as ro, as shown in attachment. How can I change it back to rw.
View 3 Replies View RelatedI've recently discovered a little problem with Firefox: if there are those multiple choice fields with arrows on the side on a webpage, I can click on the arrow but nothing shows up. Check the attached images to see what I mean, does anybody know where this comes from or how to get it to work properly again?
View 9 Replies View RelatedIs there anyway to make it so I don't have to use it? And just use the regular one which shows what Os's to choose from, like on most Windows machines when you dual boot etc?
View 6 Replies View Relatedoften we need to add attachments to things, like adding a picture to a gmail when composing or to add a picture to a document. When I try to do this, nautilus shows only folders. It shows all the folders I would expect to see but none of these folders actually contain documents. If I navigate using places and open folders of course all my files are there, I just cant see them when trying to insert a file. Why might that be? Does anyone know?
I notice the "select which types of file to show" pulldown is empty - whats happened?
When I open the trash through the icon in my desktop (trash://) I see 0 items, when actually I have a lot of items in my trash.
View 2 Replies View RelatedWhen I enter my Bios it says I have 1 Gigish and in ubuntu 243.1 MiB. Things might be alot faster with that ram working. I have a dell E210882 Motherboard.
Total used free shared buffers cached
Mem: 243 237 5 0 6 47
-/+ buffers/cache: 183 59
Swap: 708 41 667
i installed ubuntu on my samsung x30 yesterday while connected to my external monitor. when i power on my laptop the samsung start up screen appears both on my laptop and monitor however as soon as ubuntu starts the laptop screen breaks into two solid colours, ubuntu only works on the screen.
View 2 Replies View RelatedI installed normally Ubuntu in my lenovo laptop, but GRUB shows two installations instead of one. Whatever happens to one of them, happens to the other, except some command-line work.
View 4 Replies View Relatedi have an old laptop running as a server it has no video output so i remote desktop to it when making changes using teamviewer. just went into the system monitor and processes to find that teamviewer.exe was running...this has kinda confused me as i thought .exe couldnt run unless using wine. which has to be configured in most cases too. i mean the program is working perfectly but why the .exe?
View 4 Replies View Relatedsda2 and sda5 are the same partition. i set up sda5 because i wanted it to be ext4 just like sda1. i thought if i went ahead and formatted the second partition to ext4 it would just show up, automount and always be there. in my case it hasnt worked that way. is anything wrong with this, if so, how do i fix it?
View 2 Replies View RelatedWhile connecting over Xrdp, hitting the "D" key alone hides all my windows and shows the desktop. This is problematic since I often wish to type words containing at least one "D" in it. In case anyone else is having this problem, I've wrestled through it and offer this help.I'm using Ubuntu 10.10 Maverick Meercat and connecting via Xrdp. I only have this problem when connecting remotely.
APPARENT CAUSEI don't pretend to know for sure, but the problem appears to be that the remote connection is flubbing Metacity's "<Super>d" binding for the "show desktop" command. More precisely, the string "<Super>" doesn't appear to be functioning for me. If I change <Super> to <Ctrl>, I can use Ctrl + D to show desktop, and I can then type the letter D without it hiding every window from me.
Further evidence <Super> isn't working for me, if I change Metacity's "panel_run_dialog" global key binding from "<Alt>F2" to "<Super>F2" I bring up the run dialog by hitting F2 alone.
WORKAROUNDChange the system's "show desktop" keystroke. Here are the steps.
1) Alt+F2
2) gconf-editor
3) /->app->metacity->global_keybindings
4) Change the assigned keystroke for show_desktop from "<Super>d" to "<Ctrl>d" or "<Ctrl><Alt>d" or "disabled"
If someone finds this worthy of submitting a bug ticket, please let me know so I can follow it.
my first install was 10.04, and everything was working fine. Only last night, and this morning, when I tried logging into Ubuntu, I entered my username, password, but after it accepted it, it only showed my cursor and the login wallpaper. Sometimes it gets to my desktop wallpaper, but shows nothing else. I have a dual-boot with Vista, if that helps at all.
View 5 Replies View RelatedI attached a picture showing a 2.7GB swap partition in the program named Disk Utility. Also in the pic on the upper right is the program htop running and you see Swap is showing up as "Swp[ 0/0MB]". And in the middle right is Sytem Monitor showing no swap space being used and that the swap space size is 0 bytes. This all happened after resizing the partitions using gparted. I resized all the partitions. Part of what I did was increase the size of the swap partition from 512MB to 2.7GB. But, as you can see, after rebooting the system no longer is using the swap space. And it seems, according to the pic of System Monitor that there is no swap space. Is there a way to fix this so Ubuntu will use the swap space?
View 9 Replies View Relatedafter messing around with plymouth manager to try and get a decent boot screen(for the 3 weeks i've had 10.10 installed, it's just been a plain text bootup) it seemed to have removed my main boot option without recovery. i'm still able to boot into recovery and pull up my graphical environment but i can't seem to figure out how to get my normal boot option back.
View 9 Replies View RelatedI restarted conky, but didn't use my start script I just typed "Conky" from the command line, when it came up it showed the default options. Along with that I noticed "evolution-data" and "evolution-exchange" would show up as processes. (and then disappear) I don't use evolution, I use Thunderbird instead. Why is this process running? I checked the startup applications and I don't see anything Evolution related.
View 2 Replies View RelatedI installed lm_sensors via Synapt & the Sensors Applet on the panel, but that applet shows me an invariable 40�C for 2 temperatures - 'CPU' & 'temp1'.Now I know it can't read the CPU temperature (long story, the CPU fan is hard-wired to 6v & there is no temperature feedback...) but it should be able to find a couple of other useful temperatures.The same PC in XP uses Speedfan which indicates plausible temperatures for (I think) Case & Hard Drive. (Temp2 & HD0 in the attached)I wonder what I have failed to do & why I cannot see Case or HD temps in Ubuntu?In terminal, I ran sensors-detect which went OK until the last bit where it said:
"~$ /etc/init.d/module-init-tools start Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service module-init-tools start...etc" I don't follow that, but I have checked that I have it87 in both /etc/modules & in lib/modules/.../hwmon
there mylaptop crashed due to extensive heat and i cant boot back to my ubuntu system. every time i try to boot back i get an error message and it only shows BusyBox this happened to me before but one day it just miraculously boot back, now that it happened again im afraid that ill have to reinstall so i went here...
here's the error im gettin
mount: mounting /dev on root/dev failed: No such file or directory
mount: mounting /sys on root/sys failed: No such file or directory
mount: mounting /proc on root/proc failed: No such file or directory
Target filesystemdoesnt have requested /sbin/init
No init found. Try passing init= bootarg.
Busybox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash)
Enter 'help' for alist of built-in commands
I have a HP-DV7i Laptop or the (HP Pavilion dv7t-4100 CTO Select Edition Entertainment Notebook PC) they call it.....
With the lintel i7 quad core 720.. It has 8 gigs of RAM and I am using a Corsair F120 SSD for boot and a 320gig for back up, and the video card has 1gig of RAM...
o ya and I am running VM BOX with windows 7 (But have deleted it for now, and reinstalled ubuntu 10.4)
Problem: The system says I only have 3 gigs of RAM ??? When in fact I have 8 gigs, And it runs HOT! like it is over working itself.... Do I need some HP Linux based drivers of something?
I am using a Droid X hotspot which works fine on my windows partition of the dual boot. When I switch to 10.10 it says Droid hotspot connected but I have no internet. Can someone tell me what needs to be tweaked. It feels like a silly setting somewhere. I don't want to be forced to use Windows just so I can use my hotspot.
View 4 Replies View RelatedI noticed that ubuntu only detects 1 core on a mini 3.1 dual core. Has anyone the sam issue? Or has someone an idear an what's happening. Already tried 32 bit and 64bit.
View 9 Replies View Related