I have an amd phenom II 9950 125 watt am3 cpu, and 16GB of ddr3 1066 ecc registered 4x4G dimms.I am trying to find a motherboard that works with this memory.I like the reliability of ecc, and I want ot use it.
View 5 RepliesI'm wanting to update my existing 1GB Kinsgston 240 pin DIMM memory to 2GB or more. Can I keep my existing IGB and add another from a different manufacture? Will they match or should I just get new memory? What is available is DDR3 and DDR2. Guess what I'm asking is I have two memory slots total one will have the existing 1GB and I want to add at least 1GB more, does the DDR3 or DDR2 matter? Or is it all about the 240 pin config?
View 4 Replies View RelatedThis is really not a Linux or SuSE question. However, the folks on this forum are polite and knowledgeable, so I will give it a try.In the process putting together a new computer.About 99% confident in the following:otherboard: ASUS Crosshair IV FormulaCPU: AMD Phemon II X4 955Graphics card: Gigabyte GV-R685D5RAM: Unknown. ASUS, as well as several other motherboard suppliers, have not approved of any 1x4GB DDR3 RAMS. Has anyone had success with getting a 1x4GB DDR3 RAM to work on the ASUS Crosshair IV motherboard?
View 2 Replies View RelatedI had this card on Ubuntu 10.10 and Mint 10 and with the video card driver installed, all movies where playing like I had a video card with 1 MB. When I was using the os generic video card movies played more better than with the video card driver enabled, but with the generic driver I did not had any graphic effects.Will CentOS use proper the nvidia driver or not?The video card is made by Gigabyte but has the nvidia chipset.
View 1 Replies View RelatedI am trying to install Wireshark after I "untar"-ed it.This is the first time I am running RH on one of my PERSONAL PC's at home. Do I need to Register my Red Hat OS for "yum" to work? I got this RH cd from work.
View 7 Replies View Relatedmy main problem is :
1. I have 4 GB of DDR3 RAM but ubuntu shows only 3GB available.
the result of free are :
Quote:
total used free shared buffers cached
Mem: 3086992 985428 2101564 0 61212 488768
-/+ buffers/cache: 435448 2651544
Swap: 7812092 0 7812092
I am looking to build a high end workstation (as against a high end gaming configuration). Wondering if anyone has good (or bad) stories about Gigabyte GA-MA790XT-UD4P or Gigabyte GA-MA790GPT-UD3H
Configuration 1
Motherboard - Gigabyte GA-MA790XT-UD4P, AMD 790X, AM3, PCI-E 2.0 (x16), DDR3 1666(OC), SATA 3Gb/s, SATA RAID, ATX CPU - AMD Phenom II X4 955 Black Edition 3.2 GHz Socket AM3 8MB Cache Retail Boxed Processor RAM - 2 x 2GB DDR3 (not worked out which model, config, spec, one that'll go with overclocking.
[Code]....
I am building new AMD PC and done lot of research on motherboards, now I am getting confused with the two motherboards, ASUS and Gigabyte..I am searching for a board with no integrated VGA and no SLI with 5.1 audio, good price.I heard that some motherboards of Gigabyte caught fire.
View 9 Replies View RelatedThis thread [URL].. was the only one I could find on this forum that addressed the problem I am having. It also involved a Gigabyte motherboard. I recently purchased a Gigabyte GA-MA770T-UD3 motherboard which is a version 1.3 . I have a v. 1.0 of the same motherboard which I have used regularly for a year.
The problem I have is that newer versions of Ubuntu (10.04 and 10.10) don't boot reliably with the new motherboard. It will boot up to where it says "Begin: Running /scripts/init-bottom. Done." and then will stop. If I hit any key on the keyboard the boot finishes and everything is OK. Sometimes it will hang like this but often it will boot successfully without assistance. I need it to boot by itself reliably every time.
Older versions of Ubuntu (8.04 and 9.04) boot just fine with the new board. If I put the drive with the 10.04 installation in my older Gigabyte v.1.0 computer, it boots reliably every time. Interesting to note that Windows XP sp1 installs fine on the older v. 1.0 computer but I need XP sp2 in order to do a successful installation on the v 1.3. I have stress-tested the new setup for 6 hours without incident and memtested the RAM for 4 hours without error. I have even swapped RAM between the two with no resolution.
I can't find any thing in syslog to explain this. It stops just before the splash screen comes up. I removed splash with no positive result.
I would like to connect my pc to the TV but the vga cable is not compatible with my analog Tv.The pc that i'm using is equipped with everything, except it hasn't got an agp port for my TV-OUT video card.I have a second motherboard with cpu(+power source) on it, but it's too slow so i don't want to use it.So! My idea is to connect the pc to the second motherboard, and use the second motherboard just for the agp and the TV-out video card.(i really don't have no money for signal converters and new video cards at all)
View 2 Replies View RelatedIs it technically possible to use just one power supply for more than one motherboard?The reason for asking is that I have a number of old (a few years) boards that I would like to use to make up a blender render farm yet only have one spare PSU. Having looked at the pin spec URL...pin 16 (power on) should only be connected to one board (or have a manual switch to ground for on)Pin 9 (standby +5v) probably should only connect to the one board or none and the other (or all) boards would need pin 9 to be tied to a +5v pin.All the boards would network boot and have nothing connected to them, no disks, floppies, monitors, etc; as all data would reside on a network server.
View 3 Replies View RelatedI have two servers (A and B) which are identical. My idea was to have a software RAID 1 with both of them running and if server A craps out I wanted to swap the hard drives from server B into server A. When I tried to test this idea the network driver doesn't seem to want to cooperate. ifconfig gives nothing and I can't figure out why. From googling I've read that a network card has a unique ID on it (I'm assuming their talking about the MAC address) and is used in some config files which is why swapping hard drives gives two different MAC addresses and confuses the system. If that is so would anyone know exactly what config files the mac address is stored/used in? That way I can make a backup of those files and swap those out if I ever need to swap out the hard drives.
View 2 Replies View RelatedI bought a 4 gb usb memory stick for a windows 7 rescue disk for my 10' asus laptop Eee pc 1005 HAB.Can it work alternate to a CD rescue disk? It has a FAT 32 partition. Maybe I should format it?I used freeware to put Ubuntu 10.10 netbook on the same hardware kind, a Sandisk memory stick. Instead of Nero, Pendrive Linux. I can install it after I make a rescue disk, and shrink drive C.
View 4 Replies View RelatedI have problem with my Genesys Logic memory card reader. I'm trying to read SD-memory card. When I put the memory card in to the card reader, nothing happens. Also ls /dev/sd* don't show any new drives/partitions.Here is my dmesg when I put the card in:
Code:
[ 2808.136056] usb 1-5: new high speed USB device using ehci_hcd and address 82
[ 2808.264921] usb 1-5: New USB device found, idVendor=05e3, idProduct=0710
[code]....
I was wondering if it would work as regular ram or would it just not work at all.For a MSI PM8M-V 7104 motherboard [URL]I got this PC as a street throwaway. PS was dead.
View 5 Replies View RelatedAnybody else get this message after a recent upgrade to testing (at least)?
Setting up portmap (6.0.0-3) ...
Starting portmap daemon....
There are RPC services which were registered with the portmapper before the configuration was changed. You need to manually restart them in order for the changes to take effect. Current registered services:
[Code]....
My ISP doesnt provide a client for linux However theres a login form on the browser which they provide which helps connecting my account and logging in into it.Thus starting the internet. Now the problem is of machine id. Whenever I try logging in through Ubuntu it says "your machine ID is diff from the one registered with us"
This problem doesnt come with my WinXP. Are the machine IDs diff for Ubuntu and winXP? How can I make them same?to edit the ubuntus to make it same as winxp? I cant you internet on Ubuntu because of this!
I ordered my VPS but my domain name that I registered my VPS with is with another host. So obviously I have to update the nameserver options there. How can i find out what my nameserver settings on my vps? I'm using webmin.
View 3 Replies View RelatedI already setup my samba, openLDAP as well as smb-tools but when I try to registered my winXP client into Linux Domain,there was an error "a device attached to the system is not functioning" but browsing of user folder is possible, by typing in run command \server1 then provide a username and password.I can also transfer some documents on that folder, only registering from linux domain is my problem...
View 2 Replies View RelatedDo I have to have my system registered with the RHN to receive updates, or will I still receive updated without it being registered?
View 5 Replies View RelatedTest 9 brings up this error:
Code:
Test 9: ERROR
--------
Akonadi control process not registered at D-Bus. Details: The Akonadi control process is not registered at D-Bus which typically means it was not started or encountered a fatal error during startup. How can I solve this?
F10 x86_64
akonadi-1.0.0-4.fc10.x86_64
mysql-5.0.67-2.fc10.x86_64
I get this error when starting kmail in new ubuntu 10.10.
View 4 Replies View RelatedI remember having the same problem with kde/Fedora a few years back, and I can't remember the solution. Trying to open any attachment in evolution gives the error "No application is registered as handling this file" and you have to save the attachment, and then open it as normal. I have checked all the file associations, and they are fine, and the same attachment in evolution under Gnome opens fine.
View 5 Replies View Relatedit get hanged on NET:Registered protocol family 2
View 1 Replies View RelatedI already setup my samba, openLDAP as well as smb-tools but when I try to registered my winXP client into Linux Domain,there was an error "a device attached to the system is not functioning" but browsing of user folder is possible, by typing in run command \server1 then provide a username and password.I can also transfer some documents on that folder, only registering from linux domain is my problem...
View 1 Replies View RelatedI have a squeeze net install cd I downloaded and have used to install on two computers. Now I try to install on a third computer, install seems to go well, but when I try to run it, I get the message about 'driver' pcspkr already registered. Then CRASH. So, I wiped the HD and tried again; same result.
I figured the cd might have been corrupted so downloaded and burned another. This time I downloaded from a different mirror. Same result. I don't know what this pcspkr is all about; I don't even own any pc speakers. The computer on which this happens runs Lenny on another HD.
How do I install registered version(3 user) of Kaspersky 10?
View 1 Replies View RelatedI'm using Ubuntu 10.04, and I'm trying to VNC into my Ubuntu box from my MBP. I can connect just fine, however, I am unable to register any mouse clicks or keyboard input on the resulting desktop. I'm launching it as follows: x11vnc -nomodtweak -scale 9/10 I can log in using my Windows box and UltraVNC and use input with no problem.
View 6 Replies View RelatedIm currently using kernel version 2.6.33.3 and i have recompiled. I have bought a serialboard(PCIe 7800) from addi-data and im not sure whether it is properly installed.
When i type in "cat/proctty/drivers", the listing contain a line:
When i type in "lspci",
From my card distrubutor, 7013 means it is APCIe-7800. meaning my system identified the board correctly. why is there an "Unknown" word in the line?
When i type "dmesg", it only shows i have 4 ports,
And i dun have the identification of the PCI slot in which the board is plugged from these "dmesg" command which are usually type MMIO.
I want to watch some videos at iTunes U from MIT, but my browser says, "itms is not a registered protocol". Is there some way I can still access the videos, say with wget?
View 2 Replies View Related