there mylaptop crashed due to extensive heat and i cant boot back to my ubuntu system. every time i try to boot back i get an error message and it only shows BusyBox this happened to me before but one day it just miraculously boot back, now that it happened again im afraid that ill have to reinstall so i went here...
here's the error im gettin
mount: mounting /dev on root/dev failed: No such file or directory
mount: mounting /sys on root/sys failed: No such file or directory
mount: mounting /proc on root/proc failed: No such file or directory
Target filesystemdoesnt have requested /sbin/init
No init found. Try passing init= bootarg.
Busybox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash)
Enter 'help' for alist of built-in commands
I was upgrading our lab's dhcp server to Lucid and it totally died. I have it running on a Debian recovery cd right now. I ran into a bug in gtk which I seem to have fixed, but now I have more serious errors. If I boot without a CD, I get dumped into a busybox shell after the machine fails to boot. From the live CD, I tried dist-upgrading again and it dies trying to build and install rsyslog with a broken pipe error. I am at a loss as to what to do from here short of reinstalling (which is the last option as this server has a lot of custom configs on it)
I was having a hard time installing Xubuntu on a an old Japanese FMV Biblo LOOX S73A, with no internal drive. trying both from a USB stick and from a CD ( I think the USB's were USB 1's, not sure) but it was finally rolling with the CD---the bios lists USB booting- yet things happen, power shortage and the battery was out-
I'm stuck with a broken Xubuntu intall I have 3 grub options, regular, recovery mode and mem test I've tried to reinstall forcing the computer to boot from the CD in the bios, but get "no os found" If I let it boot from the hard drive, I get to Busybox/initramfs commands that I know nothing of. I just want to do a clean reinstall of the whle thing, but cannot find out how to do so. as mentioned this bios has an option to boot from USB CD ROM DRIVE, hard disk, or floppy
I followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
Alright so I'm currently in the process of trying to transfer a wubi install of ubuntu to an actual partition using LVPM. I need to use unetbootin with parted magic mounted (not sure if that's the right term) to my hard disk rather than a bootable flash drive. So I set everything up, downloaded parted magic ISO, ran unetbootin and selected the file everything installed smoothly. I then restart my computer and unetbootin is indeed in the boot list but when I select it, it remains at a black screen. I left it at the black screen for about ten minutes and nothing happened. I've tried a few times and nothing.
I was playing with my netbook and trying to hackintosh it only to realise mic, webcam and network don't work. So I restored the entire disk ubuntu 9.10 from a Ghost image I had made prior. But it doesn't boot, it only shows the word GRUB on top left corner.
Everything looks fine until when the login screen should show up but doesn't. The cursor is there and can move. I can switch to terminal by ctl-alt-F*, and login. After gdm stop and startx, gnome is back but only in fail safe mode, with non-movable non-resizable window, only one workspace, and cursor is a black cross.
I ever met a similar case before, which comes to the login screen but it keeps reloading after entering password. Finally got solved by run sudo apt-get install --reinstall ubuntu-desktop in terminal. This time it doesn't work anymore.
At the GNU GRUB boot menu, I am seeing Window's 7 listed, but am unable to boot it. I've viewed its boot setting which appears correct (/dev/sda1/ hd 0,1). I tried using the Ubuntu 10.4 LTR install disk to correct grub, but got stuck at the point where it asks for doing the manual partition.
Bad[DOG]/H.T. Ken Here are some supporting details: Running GNU GRUB ver 1.98-1ubuntu10
I have partitioned my HDD to three parts and installed Windows 7 and then Ubuntu 11.04. After a while I installed Hackinosh Snow Leopard grub was not there and whenever I tried to boot to ubuntu from Chameleon bootloader it showed an error and told to press Ctrl+Alt+Delete to restart! I have already tried to restore grub from a Live CD but nothing!
i have successfuly installed ubuntu karmic inside my windows 7. After an update, i restarted it. but it didnt boot ubuntu. instead it shows grub's command line. what should i do? all of my java projects/programs is in there.
I don't know what caused it, but as I boot into Ubuntu (9.10), the login screen never appears. Boot splash shows,then the cursor shows up but never the login screen. I haven't found anything that will reset the default gdm or login screen that works.
Loaded the OS using the Windows Installer as recommended in Smart Computing. When the system finished loading and I rebooted into Ubuntu the screen showed GRUB... Can't figure out how to load Ubuntu from the GRUB screen.
Everything went fine but whenever I rebooted, Ubuntu 10.10 was not an option in the boot list. However, Windows shows up and boots just fine. I am currently tri booting (not sure if that's the correct term) Windows 7, Ubuntu 10.10, and OpenSuse each on a hard drive of their own. In the dolphin file manager I can still see all the files for Ubuntu so I know it was not partitioned over or deleted.
I have two hard drives - (1) 80GB (2) 500GB: the 1st HD has 3 partitions (in that order) - Windows 7, Ubuntu 10.10 & Swap. the 2nd HD is for storage only, and has 2 partitions.
I did the following - I installed Windows 7 on the first partition of the 1st HD, it booted just fine. Then I installed Ubuntu 10.10 on the second partition of the 1st HD.
Windows 7 shows in the GRUB menu alongside with Ubuntu. Ubuntu boots just fine, but when I select Windows it simply restarts the computer and the GRUB menu shows again.
RESULTS.txt of Boot Info Script:
Code: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #3 for (,msdos3)/boot/grub.
I setup my client to mount some nfs mounts at boot but although they seem to be mounted, they are not! Before I give the details, I'll start by saying this is not a wifi problem. I'm using a good old wired connection. The server runs NFS3 with the following line in '/etc/exports':
[Code]...
I have tried the following nfs options in the fstab as you might have noted above: _netdev,auto,bg,retry=10. None of them seem to fix the problem. I realise a quick hack at boot time would fix this in an instant but I'd like to figure out why this is failing.
I'm encountering a strange problem. I need to open and forward all UDP and TCP ports related to VoIPtelephony (5000:32000) in the Suse 11.1 server that's acting as router/firewall in our setup. The ports must redirect to a Asterisk server in the local network. (This server has the IP adress 192.168.0.3)I've opened ports in Yast (Firewall>Ports>Advanced) and putted in some masquerading rulesirewall>Masquerading):0/0,192.168.0.3,tcp,5000:31000,5000:310000/0,192.168.0.3,udp,5000:31000,5000:31000when I do a nmap localhost I get:Starting Nmap 4.75 at 2010-01-08 16:52 CETInteresting ports on localhost (127.0.0.1):
Not shown: 991 closed ports PORT STATE SERVICE 21/tcp open ftp
I did the update from within 9.10 to 10.4. Now when Ubuntu boots up, something happens and it goes to busybox. I tried sitting there and waiting, but nothing happened. So I tried typing exit, and then about a minute or two later it finally finished booting.
It's real nice that everyone else is reporting 20-30 second boot times, but before with 9.10 my boot time was around 60 seconds or so, and now it's around 5 minutes. So how can I fix this? Is there a way to post the boot log here? Where would it be located at on my computer?
I installed all recommended updates as suggested by the update manager, after installing was asked to restart. During this restart I get the error message "udevadmin trigger is not permitted while udev is unconfigured. After this I am left with a BusyBox v1.13.3 [...] (initramfs)_
Last week I took up the courage to replace my windows 7 completely with Ubuntu 10.04 (Lucid). The Installation went fine and was happy with it.
And then on 10th I upgraded from 10.04 to 10.10 (so called perfect 10), when the laptop restarted it showed me BusyBox v 1.15.3 message on the Boot screen.
I've been having a problem with this "BusyBox", and unlike windows, my files are not able to be "stolen" to another operating system. I need to get my files back from /home back.
Similar problems to mine have popped up elsewhere, but none of the fixes seem to work (or I'm just too stupid). I tried to see what the people at Canonical and elsewhere came up with for Ubuntu 10.4 and, after the live USB checked out fine, I rather foolishly installed the OS on my Acer Aspire One D250 (1GB RAM), to run alongside Windows XP.
It booted up once, I think, and then no more. I believe the problem MIGHT be the Broadcom WiFi stuff, but I'm not sure. Anyway, booting Ubuntu leads to a blank screen with a blinking cursor... which doesn't appear to go away. Recovery mode worked once or twice (had to use ACPI=OFF at least once), then no more. It leads to the same thing: that perpetually blinking cursor.
What I would like is either a fix to get Ubuntu 10.4 launched, or some way to remove the OS and restore my netbook back to what it was. Unfortunately, the MBR fixes that are posted all over cyberspace are useless, as my hidden partition doesn't contain the rtmbr.bin file it needs to work (don't ask me why--I've already posted that question at the AAO user forum). So it seems a fix to launch Ubuntu is the only solution, so that I can at least set grub to launch Windows XP rather than Ubuntu.
I tried Wubi, and all is fine, but when I choose Ubuntu on the boot menu, it shows some dialog, then just blank. its stays blank forever, so I had to shut the computer off.Then, I burned the Ubuntu iso to a CD and botted from it at startup. This at least showed the purpl-ish install screen. After I pressed enter over install, it went to the blank screen again. just black, nothing appeared.I'm not sure what the problem is. My laptop is fairly new, it shouldnt be having an issue to run it.I have 4Gb RAM, plenty of space on the hard drive, and a 1Gb video card...I have no clue what to do, as this is my first encounter with an Linux distro ever. help?
I've tried both the DVD and CD, the CD with both usb-creator-kde and unetbootin. The results are the same always, the USB boots, into the splash screen, I select Start Kubuntu, it goes to the loading screen. After some seconds it starts scrolling a wall of text, gives some error about not being able to write or read /root/var/* because they don't exists and end up on a BusyBox with (initramfs) prompt.
I need to install the system on a new disk (2tb) instead of upgrading because I have to send the current one (1tb) to replacement. Could the large 2tb disk be a problem? I tried unplugging all disks and leaving just the disk I want to install to, but no deal... (both are SATA).(Checked the md5sum and they both match for DVD and CD...)
I either installed Hardy heron or its predecessor by accident, but began running it exclusively. I did it way back when while trying to create a test drive disk, and I did not repartition the drive, because all my windoze NT stuff survived. I'm now 8.04. Yesterday I had a bunch of updates to do, did them, closed a ton of windows and then pulled up 3 open office files and each, when it came up said there wasn't enough space to save all needed information as they opened. I then closed them and one hung and froze the whole machine, leading me to do a reset. This is BEFORE rebooting from the updates.
Now when I boot into Ubuntu (I'm dual boot) I start to get the opening Ubuntu GUI screen but then get :
BusyBox V1.1.3 (Debian 1.1.1.3-5ubuntu12)built in shell (ash) line followed by:
initramfs)
I'm essentially a total noob, I've rarely used command line and not for a long time. I made a version 11.04 live disk, and it says that the file system is clean, but will not show me any of my old files, only the NT files and directories. I have a ton of unbacked up important data in Hardy Heron so I don't want to do an install from the 11.04 CD.
I've read several threads so far, and can't seem to find anything addressing this that I understand. The drive is a 160GB drive on an HP Pavilion dual core that has a 154GB NTFS boot partition, which is where I'm sure the Hardy Heron files are, and a 6GB FAT32 HP_RECOVERY partition that windoze lists ad drive D (the NTFS is C) The live disk says the FAT32 partition is /dev/sda1 and the NTFS is /dev/sda2
Where should I start? I've seen stuff about booting into recovery mode, but that isn't an option when I boot from the hard drive, and the only older ubuntu disk I have is for 7.something and generates "defective CD" type error messages.
As far as I know the power went out once and my computer might have been on - now Ubuntu won't boot correctly. It boots into 'BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash)'.
Code: mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target filesystem doesn't have requested /sbin/init. No init found. Try passing init= bootarg. BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) Enter 'help' for a list of built-in commands.
I've got Ubuntu 11.04 on a 40G hard disk in dual boot with a Windows XP on a 300G hard disk.
I've got back data with an USB key from a broken Windows Seven, then I've shutdown my ubuntu, but it has difficulties to stop (a mp3 player, which doesn't work well, has already damaged my Ubuntu previously). Then my Ubuntu doesn't manage to boot : it launches "Busy Box" with "initramf". When I boot in recovery mode it fails to boot something at 5s then it tries to launch something constantly.
I've launched a live CD in order to recover my data, but when I try to mount my hard disk I get :
Code:
I've found this link about this problem : [url], but it's too complicated for me.
I just want to recover my data, a system reinstallation wouldn't bother me.
