A while ago I successfully dual booted my system with Vista and Ubuntu. then Windows 7 came out and I wiped Vista off my laptop and installed Windows 7. The problem is that my laptop no long knows that there is a whole other operating system sitting on the hard disk and I can't access it. What can I do to fix this?
View 5 Repliesive just installed ubuntu 9.10 on my lap top works fine, the problem ive got is it will not recognize the usb ive placed in for the wireless mouse (bush am-x270) and my laptop is compaq v4000
View 11 Replies View RelatedI have a cheap 32GB MP4 player I bought on Ebay. I was made in China. I paid $20.00 for it. Under WinXP my laptop recognized it as a flash disk. I used Win Media Player 11 to Sync up my downloads. WMP 11 did NOT have to be running in order for the OS to recongnize the player. I could treat it just like a jump drive.
Ubuntu 9.1 (64bit) won't recognize it. I don't use ver. 10.04 or 10.10 due to problems with video, wireless and other problems. 9.1 works like a dream on ALMOST everything. I'm tired of dual booting.
I'm install it onto my laptop (its about 4 years old - a Sony Vaio VGN FS315E).
I have been given a live disk of the latest edition of ubuntu (10.4?) by someone at work, but my CD drive on my laptop seems to think the disk is blank. I know this is not the case as when the disk is inserted into a different laptop is it recognised as an ubuntu installation disk.
My aim to boot ubuntu from the disk to get a feel for what it's like before installing it fully on my laptop, and also to check that it would work on said laptop.
I was using GParted Live to resize my Windows XP partition on my desktop aaaaand... it rebooted properly and now says "no such partition" and won't boot from anything. It doesn't even recognize my dell utilities partition. I can boot to the GParted Live disk - and that is all. So I'm relatively certain that I just destroyed something
View 3 Replies View RelatedI have a problem with my Grundig's (model GNB-250D) laptop wireless card. I recently installed Ubuntu 10.10 and tried to use a wireless connection to browse the internet but it didn't detect any, it seemed strange as it worked perfectly on Windows. I can browse the internet fine if I use an Ehternet cable.
View 4 Replies View Relatedboots fine if an external monitor is plugged in, otherwise the laptop screen just flashes white till it dies and reboots. lsmod says nouveau is loaded, however it lets me rmmod it as though its not in use. rmmod on the nvidia mod says it is in use. nvidia settings can change the resolution of the external monitor
used yum to install and built from scratch, both have the same result. reason i want to get rid of nouveau is because it detects my laptop resolution as larger than it is and even if i lower the resolution it still stretches it further than the boundries of the screen. without the nvidia driver my laptop display is recognised correctly aside from size issues.
Enabling the nvidia driver / etc / rc.d / init.d / functions line 526 1484 Segmentation fault "$@"
[FAILED]
^^ that appears during boot.
I have installed Ubuntu on my netbook, an early Eee PC, and the battery ran out of charge. I didn't know that however and turned on my netbook. It started booting up traditionally, but then it just spit out a whole bunch of code:Quote:
Killed
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
[code]....
I can take apart my computer and fix a problem and then re-install the partitions. Hopefully I won't have to re-install, but I want to make backups just in case
-HP laptop with a windows (NTFS) and an Ubuntu (ext3) partition ~ 500GB total
-Iomega 1TB external hard drive partitioned into a 500GB NTFS storage, 250GH BLANK ext3 Linux Backup, and 250GB BLANK NTFS Windows Backup.
I want to copy my windows and linux to their respective 250GB spaces on the External HD.
1.) Can you direct me to places on the net that describes this in detail?
2.) Can I copy a partition while running that partition?
3.) Will copying C:/ in windows over to the external HD copy entire partition?
4.) Can I copy a Laptop partition to a external HD partition that is bigger?
5.) Do I have to use partition manager software or can I do this from terminal/cmd prompt?
how can I mount my iPhone in Opensuse? after i connect my device to laptop via USB,opensuse doesn't mount it and recognize it at first as a digital camera.
View 3 Replies View RelatedLinux (CentOS, Red Hat, Ubuntu) operating systems can't recognize my laptop keyboard, and I'm unable to work with it any more. It had been fine but I don't know what's happened to it now. Note that it works correctly in Windows.
View 2 Replies View RelatedLong time Slack user, thought I would try to update my old laptop (Toshiba Satellite with AMD K6-2 333 MHz, 128 MB RAM, 40 GB hard drive) from 10.2 to 13.37 in celebration of the newest version :-)
By update, I mean a complete wipe and reinstall, just to be clear.
So 10.2 runs well, everything looks shiny (XFCE of course) but when I try to install 13.37 I run into trouble. I figured out to boot with huge.s instead of hugesmp.s, but when I try to run 'setup' I get an error that says I have no partitions. mkay, I try fdisk (or cfdisk), but I get literally NO response - no error, no nothing but a return to the command promt. It is exactly as if fdisk does not recognize there is a hard drive there at all.
I boot back into 10.2,check the BIOS, everything looks fine, I have a drive mounted at /dev/hda1, swap at /dev/hda3. Are there some additional parameters I should be booting with? Does it matter that the hard drive is ATA?
I'm trying to clone a Linux install to a different laptop. It's made a little complicated by two facts:
1) The 'new' laptop I'm trying to copy my Linux installation to is actually older and has a smaller hard drive then the computer I'm copying from
2) The computer I'm copying from has both a windows and Linux installation; I only care about the Linux partition.
I figured I would copy only the Linux partition from my primary computer to the laptop, sense the laptop doesn't have a large enough hard drive to copy everything. So I used the DD commands to copy SDA3 (main Linux partition) from my main computer to SDA2 of my laptop. When I came back a few hours later I was surprise to find my laptop trying to reboot itself (I never turned it off). It would keep starting to reboot, failing, and restarting itself. Not too surprising sense its boot partition wasn't changed so it's trying to boot into centos when I copied a redhat partition to it.
The problem is that when I used a redhat boot disk the rescue mode was unable to find a Linux partition to mount. /dev/sda2 exists, but trying to mount it gets the complaint "No such file or directory". "fdisk -l" lists sda1 (the boot sector) and sda2. Sda2 is the correct size and reports Linux LVM for its system. But "fdisk -l /dev/sda2" gives the error message "Disk /dev/sda2 doesn't contain a valid partition table" Did I not clone the drive correctly, or was an error caused due to the boot sector not being copied yet (the laptops boot sector is smaller then my old computers, so I can't copy from old computer to laptop)? Can I salvage the laptops partition table somehow, or do I have to repeat the cloning process? And if I do have to re-clone my computer can anyone tell me what I did wrong the first time so it works this time? I don't care if I copy just the Linux partition or both windows and Linux. Even though my main computer has a larger hard drive I'm only using about half of its available space so it should be possible to copy both partitions if I could ignore the unused sections of the harddrive.
Edit: I used DD to copy a tiny part of the Linux partition from my laptop so I could look at it. Most of it is illegible binary of course, but I scrolled through till I found some text right near the beginning:
Code:
VolGroup00 {
id="F2MWxh-....-BidcLe"
seqno = 1
[code]....
So it seems that the DD command did copy everything over to the laptop, which is good to know. I noticed that it says device="/dev/sda3" right in the middle of the code I just posted. The Linux section of my original computer was SDA3 but I copied it to partition SDA2 of my laptop. So is the problem because the boot partition is for the wrong device? I don't suppose if I modified that one line to say SDA2 it would be able to load correctly? (Not that I know how I would modify the line, short of using the DD command again).
I have two hard drives, a 320GB and a 1.5TB. The first hard drive has two windows partitions. The first one is the main vista partition and the second one is one for factory restore (its an HP pavilion).
So wanted to install both ubuntu and ubuntu studio on the second hard drive, so I allocated about 1TB as an ntfs partition that I wanted to be accessible by both vista and ubuntu. So I have 400GB left for both distros. I have partitioned off two 40GB partitions for the two roots and I'm sharing one large home parititon and I put a swap partition at the end of the disk.
After I got through the second installation (ubuntu studio) vista no longer recognised the ntfs partition on the second disk. I thought maybe the install botched the boot sector, so I used testdisk to try to fix it, but it hasn't done any good. I do not want to format the second drive again because I have data on there I transferred over from an old hard drive before I installed ubuntu.
I tried to 'initialise' the disk in vista, but that just wiped the partition table so I had to fix that with testdisk on a live cd
Does anyone have any idea how i could possibly fix this problem or what winblows is thinking? I want to be able to read the partition in windows.
Code:
This is my first time to post a thread.I'm not native English-speaker,so my English is poor.And I wish you can understand what I mean.
I have used wubi for months.Today I decide to install Ubuntu 10.04 on my harddisk.I create a liveUSB to install 10.04.But the problem during installing is when partition detecting,the windows partition can't be detected.It shows 'Ubuntu' on /dev/sda1,but in fact it is the windows partition.I ignore it and go on.After all done,10.04 can work well,but windows can't be booted.
Then I try to use 9.04 CD to install,and it shows 'Widows NT/2000/XP' on /dev/sda1 correctly.At last,both 9.04 and windows xp can be booted.
Is it the problem involving the difference between CD and liveUSB,or 10.04 and 9.04?
Can you tell me why and give me a hand?
How do you make Windows 7 see my Linux partition in it. I want to run some mp3s and avi's from Windows 7.
View 9 Replies View RelatedSo I am experimenting with other linux distros.....I just installed a small partition with OpenGEU, the one still based on Ubuntu.....now it wont recognize Mint. Ubuntu Studio is next on my list, but before I invest any more work I want to make sure I can add more partitions to grub, not just the most recent linux partition...
I think that future distros of linux should have a fix for this....if you install linux it should detect every other operating system on the disk, not just windows plus the most recent linux install.
install /boot separate? I always create a / and /home partition but never separate boot. Does that make life easier?
I have a sandisk sd card with 3 partitions two ext2 and one fat 32 partition for some reson Ubuntu only automounts two ext2 partitions. I've tried inserting another card with only one fat32 partition and the system doesn't mount it. Both cards are visible in gparted byt not in "Places" menu.
View 4 Replies View RelatedI'm trying to install Ubuntu 10.10 on my WinXP desktop computer. I used the LiveCD and manually configured the partitions. I resized my XP partition (the entire SATA HDD) and created a 37GB partition for Ubuntu, as well as a 3GB swap file. I installed the boot loader on the Ubuntu partition. But BIOS doesn't recognize that the drive has separate partitions, and I can't boot into it from Windows either. I know I didn't modify WinXP's MBR, but should I have? I didn't know where it was.
I booted into the LiveCD again, and went into the disk manager. I Edited the Ubuntu partition and saw a checkbox that said "Bootable". I checked it and hit apply, hoping that might do it. I waited twenty minutes and the little circle was still spinning with no indication that it was actually doing anything or any warning of how long it would take, so I rebooted. Still no luck.
Someone told me that Ubuntu sometimes won't be bootable if you have both SATA and PATA drives in the system, which I do (although both XP and Ubuntu are on the same, SATA drive) and gave me a page that told me to use Grub4Dos. I fiddled around with that, only to come onto the Ubuntu website and find out that the page they gave me was outdated, before Ubuntu used GRUB2.
I had Windows 7 ultimate installed on my netbook and installed Ubuntu 10.10 using the 'Install alongside other OS's' option which put windows onto another partition and created one for ubuntu.
Anyway I've tried reinstalling the grub but I never get a grub boot menu when I boot it up and the grub won't recognize the windows install
I have been using fedora 12 for quite some time. When i first installed Fedora on my new system i created 2 ntfs partitions on the hard disk using mkfs.ntfs and in the space at the end of the disk i have Fedora. recently i tried installing Win7 but it didnt recognise the partitions even tho they are NTFS. I had to format 1st partition from setup to install Win7. After boot i find that Win7 doesn't recognise the 2nd partition as welL. The partitions are working fine in Fedora.
View 14 Replies View RelatedI'm using an Intel-based macbook, I made a new partition with BootCamp, after that I inserted debian installation CD, deleted the FAT32 partition that was made by BootCamp, made 3 new partitions:
/ ex3
/home ex3
and a swap partition,
after installing debian, I restarted macbook, but it couldn't recognize linux partitions, in Mac OSx I can't find any of these partitions as startup disks, and I can't mount them in Disk Utility, How can I access these partitions? how can I boot to debian?
I've had Ubuntu 10.10 installed for a while and I recently cleared a partition to install Windows XP. However, when I load from the Windows XP boot CD, I get "7379one MB disk 0 at ID 0 on ?Bus 0 on atapi(Setup cannot access this disk)". I've tried just about everything
View 4 Replies View RelatedI'm trying to install Fedora 10 from a USB memory stick on which i've installed Fedora-10-x86_64-DVD.iso and, early in the process of configuring the installation, i get messages about both my IDE hard drives having unrecognizable partition tables:
"The partition table on device sda (... my disk data ...) was unreadable. To create new partitions it must be initialized, causing the loss of ALL DATA on this drive."
Same for sdb.
My PC currently runs Fedora Core 4 (yes i know i should have gotten around to upgrading my OS earlier) and yes it recognizes both hard drives just fine.
The answers I've found on the web suggest to backup my drives and repartition. I'm not too hot on that "solution".
explain why a F4 partition table is not recognized by F10?
BTW, I've recently upgraded my motherboard, processor, DVD drive, regrouped both my IDE drives on the same bus, ... I consider it a miracle F4 still runs on this PC (although F4 does not support the motherboard's graphics card, so no X11).
I have a gateway laptop that I have attempted to dual boot, but the computer only sees the Ubuntu OS and the Vista Windows Recovery Partition. (Actually, gnome reports 3 separate Ubuntu OSs... part of the problem?)
When I type fdisk -l, I get the following message code...
I have been upgrading from 9.04 to 10.04. Now, I want to install 10.10 from the beginning without losing the data in my current partitions but when I run the Maverick installer it recognize my disk as a whole with no partitions. From another posts, I suspect that the problem is in the partition list because it seems to be a duplicate partition but don't know how to fix it. This is the fdisk output:
Code:
jgarcia@jgarcia-laptop:~$ sudo fdisk -lu /dev/sda
Disco /dev/sda: 250.1 GB, 250059350016 bytes
255 cabezas, 63 sectores/pista, 30401 cilindros, 488397168 sectores en total
Unidades = sectores de 1 * 512 = 512 bytes
[Code]....
I recently have installed Ubuntu 10.10 Maverick Netbook Edition in my personal netbook. The thing is that I had installed Windows 7 in the hard disk drive so I decided to install Ubuntu alongside with it. After the process of installation everything was cool but I hadn't the Grub working. I then pressed the Shift button during the booting process so I got the Grub menu but it didn't show the Windows 7 partition. The Windows installation was not erased because its file system is present in Nautilus. I have tried reinstalling the Grub a thousand times but nothing changes. I have attached the results of the boot info script so you can have some info about my booting configuration.
View 9 Replies View RelatedI've tried to run a Clonezilla VM using vmplayer. All works fine except when I get to the cloning section. I have three partitions on the HD; partition A, B and C.
A = Partition to clone
B = Partiton onto which the clone image of PartA is to be saved
C = OS partition which is running the Clonezilla VM.
I would like to save the partition as an image but when it actually comes to the nitty gritty of partition cloning Clonezilla does not recognise PartA or PartB. I get error massages along the lines of "No unmounted partitions found." When I drop into a shell prompt the fdisk -l output shows nothing. However, running from the liveCD it recognises both these along with PartC. Is there a way of carrying out the cloning using this method by tweaking vmplayer settings or is the project just not possible ?
I am also wanting to install on a laptop which is about 2 years old. I get the error message "ntldr is missing" when it boots up and doesnt recognise the disc even though it is set to boot from cd first!
View 2 Replies View RelatedWhilst in fedora i deleted files off my second hard drive to free up some space, i deleted over 10gb worth of data. When booting back in to my windows partition it doesnt recognize the free space instead it thinks the hard drive is still full even though i deleted the data.Not to sure as to why this has happened, as im sure i have deleted stuff of this hard drive before from my linux partition.Any help would be greatly appreciated as my 70gb hard drive is full with only 20gb of data to show for it
View 2 Replies View Related