Slackware :: Installing 13.37 On Old Laptop - Fdisk Does Not Recognize The Hard Drive
Jul 19, 2011
Long time Slack user, thought I would try to update my old laptop (Toshiba Satellite with AMD K6-2 333 MHz, 128 MB RAM, 40 GB hard drive) from 10.2 to 13.37 in celebration of the newest version :-)
By update, I mean a complete wipe and reinstall, just to be clear.
So 10.2 runs well, everything looks shiny (XFCE of course) but when I try to install 13.37 I run into trouble. I figured out to boot with huge.s instead of hugesmp.s, but when I try to run 'setup' I get an error that says I have no partitions. mkay, I try fdisk (or cfdisk), but I get literally NO response - no error, no nothing but a return to the command promt. It is exactly as if fdisk does not recognize there is a hard drive there at all.
I boot back into 10.2,check the BIOS, everything looks fine, I have a drive mounted at /dev/hda1, swap at /dev/hda3. Are there some additional parameters I should be booting with? Does it matter that the hard drive is ATA?
View 11 Replies
ADVERTISEMENT
Aug 24, 2015
when I type 'fdisk -l' I get the following:
Device Boot Start End Sectors Size Id Type
/dev/sdb1 16065 584830259 584814195 278.9G f W95 Ext'd (LBA)
/dev/sdb5 16128 584830259 584814132 278.9G 7 HPFS/NTFS/exFAT
I have 2 hard drives both are 278.9GB in a mirror raid 1. Why does 2 partitions show up? Are they referring to each physical hard drive? I want to believe that this is the same partition and not two different physical hard drives since both are in the same 'start' and 'end' range. Is that correct?
View 3 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Mar 2, 2010
I was transferring some files from my external USB hard drive onto my laptop (running 64bit Karmic), and my laptop froze up for whatever reason.Everything on the screen stopped and the Scroll Lock and Caps Lock LEDs began flashing.Not knowing anything else to do, I hard booted off with the power switch.At this point, I was concerned if anything on either hard rive would be damagedI booted my laptop back up, and all seemed well until I trued to open my Documents folder.For some reason, Ubuntu will no longer open any folders at allI can't click on ComputerDocuments, Music, etc. When I do, a tab opens in the taskbar that says Opening folder. It stays on screen for about 20 seconds, and then goes away and the folder never opens.The weird part is if I open gEdit and try to load a file, I can see and get to everything.
View 4 Replies
View Related
Apr 1, 2009
There are 3 IDE drives in this box.
hda has Debian Lenny installed (with swap) and is to remain.
hdb1 has a linux distro on it.
hdb2 is a data partition and is to remain.
No other partitions on hdb.
HDD is data only (not really relevant but mentioned for completeness)
The system boots via Grub from MBR on hda.
I'm trying to install F10-i686-KDE-LiveCD on hdb1 but F10 won't allow it without modifying the partition tables which will, of course, wipe my data on hdb2. hdb seems to be a happy disk; e2fsck shows it clean and both partitions open properly in Konqueror within the LliveCD.
View 4 Replies
View Related
Apr 4, 2010
So I tried to install Ubuntu on my Acer Aspire ASE380 desktop, and I think during the partition portion. I think I messed up the hard drive.
Now my computer won't recognize my hard drive. I've tried using the acer repair disks I made, I tried unplugging and checking all the cords and lines, I tired flashing the BIOS, I've tried using other boot disks like Ultimate boot CD, and Acer support is no help either.
I really don't know what to do now. It shows nothing in the boot setup or the BIOS set up. I've also tired the ALT - F10 for acer computers to enter and repair partition and nothing.
I just want to get this thing up and running. I'm tempted to just buy a new hard drive.
View 2 Replies
View Related
Aug 3, 2010
I've been trying for hours now to get Ubuntu 10.04 Netbook Remix onto my HP Mini 1030NR. It boots up fine from the flash drive, but then when I go to install UNR on the hard drive I get through the first 3 steps and then get stuck. It goes to the "Prepare partitions" screen but no devices are shown to be partitioned. I formatted the hard drive I'm trying to install on on another computer to NTFS, so it should be blank and ready to go? I should probably mention the drive doesn't show up in GParted either. Is there something obvious I'm overlooking?
I've tried the methods suggested in this thread to no avail: [URL]
View 1 Replies
View Related
Jun 10, 2011
I am trying to install Ubuntu 11.04 64bit on my computer, I downloaded it onto my flashdrive from [URL]... When I reach the installation screen all the boxes are checked except 4.4Gb of space available, I know I have enough space because I am using a 1TB hard drive, I also have Windows 7 installed and it recognizes my hard drive. I have tried this with my hard drive partitioned and unpartitioned. I only have 1 hard drive and it has never been part of a raid array. I've also looked on google and the Ubuntu forums and still can't find anything relevant
View 1 Replies
View Related
Apr 18, 2009
I have this laptop that I just reformatted in hopes of doing a dual boot between XP and FC4. It is an Acer Aspire 5315-2153 (the Wal-Mart special). I reformatted the drive; the Windows partition is in NTFS and then I have a 10GB partition in FAT32 for Linux. When I try to install FC4, the disk boots into the installer, then it tells me that it does not recognize any hard drives (the disk in this laptop is a Hitachi HTS541680J9SA00). It asks me if I want to load any drivers, and I tried a few and still no success. Any way, after it goes through that, it tries to start anaconda and after that launches it goes to a black screen and nothing happens. So, did I do anything wrong in the Windows install that won't allow the disk to be found? The XP disk only allows a format in NTFS, otherwise I would have done FAT32 on the whole drive. Second, is the anaconda problem something related to the HDD issue, or does anyone think that it may be a separate issue?
View 14 Replies
View Related
May 31, 2010
Is there any way to make windows recognise my second hard drive (Which is fully exclusive to ubuntu) and access it? Iv'e been getting a few BSOD's since installing ubuntu and I'm pretty sure it's because windows keeps trying to access it and failing.
View 2 Replies
View Related
Dec 10, 2010
I've bought new PC, and installed win 7 first. Then i've resized my disc and left the half of it unallocated for my ubuntu. But the ubuntu installer doesnt see my hard disk. when i run fdisc -l, the only thing that i see is my usb from wich i'm booting. I know that this is a common problem, searched for help on the web for hours and nothing worked.
View 9 Replies
View Related
Apr 12, 2010
My 13 year old Pentium 3 1.3 ghz machine is finally ready to call it quits. specifically, my slave drive where all of my music is stored. I can access a very small portion of the the files on the HD, The files are still there but are not showing up. any ideas on how I could access this drive. I wanted to try to reinstall my os on the primary drive in hopes that it wouldget it working, unfortunately I've run into what's seems to be a common problem of my usb keyboard not being recognized.
View 1 Replies
View Related
Jul 8, 2011
I have a samsung removable hard drive, which have 3 fat32 partitions on it. When I plug into the usb. nothing happened and i just see a sdc was added in /dev/...so, there's nothing wrong with the drive, because i can use it on windows and ubuntu.
View 10 Replies
View Related
May 2, 2010
start getting Linux up and running. Like a lot of people, I chose an older computer I could fuss with, a 500mhz 256meg ram machine, and decided to install Puppy on a spare 40meg hard drive I have, as my bios does not boot from usb...I think...
Anyway, I have found that my bios does not recognize the hard drive when formatted to ext2! I have taken the drive and formatted it back to ntfs, and my bios recognizes it, and then back again to ext2, and nope, it's not there, thus I am still booting puppy from the cd...sigh...
Is my bios so out of date that I'm just out of luck? Is there anyway to check this?
View 5 Replies
View Related
Jun 13, 2010
getting freespire to recognize my 2nd hard drive and allow me to use it for things I want to save there and such. I also cannot get CNR to come up in my browser and need some information as to how to install programs.how to find installable programs,and install them.
View 1 Replies
View Related
Dec 7, 2010
I was wondering what I need to do to install software in Virtual Windows? Basically how do I get VB to recognize the CD drive?
View 5 Replies
View Related
Jun 9, 2010
VMware virtual machine with the RedHat9 can not recognize win7 hard drive, so can not be mount,how to solve? Situation is showed in the Figure,when type the command ,it do not display the hard disk, the picture is below [URL]
View 7 Replies
View Related
Jan 23, 2010
I try to install Slackware to my IDE hard drive and boot first from Slackware DVD. After I loaded huge.s kernel, and tried to partition the hard drive using fdisk by entering "fdisk /dev/hda", I found out that the partition size is max to 3 Gigs instead of 80 Gigs.
I think the kernel is looking at my boot disk, which is around 3 Gigs. How can I make so that it looks at my IDE drive instead at my boot drive? Is there any manual that shows me how to install Linux from scratch this means I want to wipe out all my hard disk and install Slackware Linux there?
View 2 Replies
View Related
Jun 19, 2011
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
View 2 Replies
View Related
Dec 13, 2010
Installing Linux on second hard drive in laptop I hope to get a laptop with two hard drives. I like to know if UBUNTU comes with installer that would easily let me install UBUNTU on the second hard drive. And also let me select which OS to boot on startup. Win 7-64-bits will be on the first hard drive, Linux will be on 2nd / other hard drive. I prefer NOT to use Wubi to install linux in Win 7's primary partition because should I reinstall Win7 with recovery disks, it will wipe out Linux.
View 9 Replies
View Related
Apr 7, 2009
I am upgrading my old 40G hard drive to a new 160G one and want to know the best way to set it for use with my system. I currently have a Windows partition which I want to keep & reinstate onto the new drive. Then I want to have another 3 partitions for different distros.
What should I do as a first step when I put the drive in boot off a live CD. I am assuming that I will need to do. If I do a, # grub-install, will this then format the MBR and then create a small partition for /boot. Following that, do I just restore the Windows partition immediately after the /boot partition, and then create new partitions for the distros accordingly.
I would also like to create a seperate swap partition and then install F10. Is there an option in Anaconda to not use LVM (can't remember).
View 5 Replies
View Related
Dec 1, 2009
I would like to backup up my linux files to an external hard drive from a laptop. What would be the most simple and easiest way to do this? How would I format an external hard drive in linux.
View 4 Replies
View Related
Dec 30, 2009
I got a new laptop, a Dell D400. I want to swap my hard-drive from my old laptop into the new one, and did so... but then got an error stating that my CPU didn't support PAE.
As far as I was aware I hadn't actually installed a kernel with PAE enabled [as I always pick a real-time kernel for audio work]: but then read that lots of the newer distibutions are enabling PAE by default [which is what's caused the problem].
Is there an easy way of disabling PAE in the existing kernel? Or would it be easier to downgrade to another version of OpenSUSE? I'm on 11.2.
View 9 Replies
View Related
Jan 26, 2010
I am having on trying to backup my crashed laptop with ubuntu 9.10 when i double click on my hard drive, it says "unable to mount location" and it says "unable to mount location" a job is pending on /dev/sda2 when i right click on my hard drive and select mount.
View 2 Replies
View Related
Nov 28, 2010
I am trying to wipe the hard drive on an ancient laptop. The current plan is to find a live distro that can run shred or equivalent program. The problem is that most ultralight linux's don't seem to work with the RAM restrictions (Optimistically 80 MB, Worst Case 16 or less). I will likely have to just bust open the case and physically mutilate the Drive I would prefer a more 'civilized' approach (defined as one which keeps the machine in one functioning piece).
Model: Dell Latitude XPi CD
Processor: Intel (Inside) Pentium (one?) MMX
Available Media: CD, Possibly Floppy (I have access to only one other machine with a drive)
OS: Windows 95
I am having a hard time getting any farther specs. If anyone knows of a distro that has a prayer of running in these conditions I would love to know.
Current candidates:
Puppy Linux < 1.0.2
DSL (Unsure of architecture compatibility)
View 6 Replies
View Related
Mar 29, 2011
I have a dual boot computer with slackware_64 13.1 and windows.
I have a 120G ide hard drive that I need to add to my computer.
Adding this hard drive changes the drive device id's and slackware won't boot.
as installed, my drives look like this:
When I add the extra hard drive, it looks like this:
I know there is a way to make an initrid and to use the uuid identifications for the drives, and even use labels instead of the long uuid's, but I'm unfamiliar with this process, so I was hoping somebody that's done this before might point me in the right direction.
View 11 Replies
View Related
Jan 25, 2011
Have a seagate laptop hard drive, it spins up momentarily, makes some quiet electronic 'zipping' sounds then stops. After this, it is still reachable by the seagate utility, which says the hard drive is experiencing too many read errors, but the platters are definately not spinning.
View 4 Replies
View Related
Apr 13, 2010
This isn't a problem with the 2.6.26 kernel that I have been using, but it is with newer ones. I want to upgrade to a backports kernel, because there has been a REALLY long standing 2.6.26 bug with cpu frequency governors and suspending that is never going to get fixed.
Basically, with the 2.6.30 backports kernel, the hard drive spindown time is way too short. I'd like it to spin down after a minute or two of inactivity, but it is spinning down after only 5-10 seconds. Is there any way to fix this? edit: Now that I think about it, this is also a problem on another laptop that runs squeeze.
View 2 Replies
View Related
Jul 13, 2010
I am getting ready to install Ubuntu 9.04 on my Dell laptop, only because 10.04 won't work. I have the hard drive partitioned as C: and D: . I am keeping Windows on C: for a couple of applications that need it. I still have a few things on the D: drive. Do I need to have it completely clean and formatted? And, will Ubuntu ask where I want it to be installed or will it just take the largest contiguous space available? After the install, does the system automatically ask if I want Windows or Ubuntu or how do I tell it which system to bring up?
View 1 Replies
View Related
Feb 26, 2010
I am new to linux . i am trying to install SUSE linux 10 SLES. all the steps are clearly installed but. the final step- Hardware configuration step failed.in this final stage system takes more time and restarts.
View 2 Replies
View Related
