I've had Ubuntu 10.10 installed for a while and I recently cleared a partition to install Windows XP. However, when I load from the Windows XP boot CD, I get "7379one MB disk 0 at ID 0 on ?Bus 0 on atapi(Setup cannot access this disk)". I've tried just about everything
View 4 Replies
I have a broken DVD drive and no others available right now to burn a DVD iso to so I'd like to use a empty hard disk instead.
I've tried Unetbootin but that only copies a few megabytes of files - the rest of the image data in the ISO is ignored.
I have verified the ISO is valid and working with VirtualBox. It's MD5 hash is also as expected. But I need to boot at the real bios not an emulated one.
I've also tried things like:
sudo cat /disk/image.iso > /dev/sdb1
and that got "Permission denied" -
This is my first time to post a thread.I'm not native English-speaker,so my English is poor.And I wish you can understand what I mean.
I have used wubi for months.Today I decide to install Ubuntu 10.04 on my harddisk.I create a liveUSB to install 10.04.But the problem during installing is when partition detecting,the windows partition can't be detected.It shows 'Ubuntu' on /dev/sda1,but in fact it is the windows partition.I ignore it and go on.After all done,10.04 can work well,but windows can't be booted.
Then I try to use 9.04 CD to install,and it shows 'Widows NT/2000/XP' on /dev/sda1 correctly.At last,both 9.04 and windows xp can be booted.
Is it the problem involving the difference between CD and liveUSB,or 10.04 and 9.04?
Can you tell me why and give me a hand?
I had Windows 7 ultimate installed on my netbook and installed Ubuntu 10.10 using the 'Install alongside other OS's' option which put windows onto another partition and created one for ubuntu.
Anyway I've tried reinstalling the grub but I never get a grub boot menu when I boot it up and the grub won't recognize the windows install
I recently have installed Ubuntu 10.10 Maverick Netbook Edition in my personal netbook. The thing is that I had installed Windows 7 in the hard disk drive so I decided to install Ubuntu alongside with it. After the process of installation everything was cool but I hadn't the Grub working. I then pressed the Shift button during the booting process so I got the Grub menu but it didn't show the Windows 7 partition. The Windows installation was not erased because its file system is present in Nautilus. I have tried reinstalling the Grub a thousand times but nothing changes. I have attached the results of the boot info script so you can have some info about my booting configuration.
View 9 Replies View RelatedThe partition is formatted to ext3, starting with block 1 on the drive. The mount point for /dev/sdc1 lists 0 files when doing `ls -A` `df -h` shows that the partition has 92MB used. How is this space being used, and how can I free it up?edit: I guess this isn't a newbie question.
View 7 Replies View RelatedJust ran into a problem involving mdadm, a disk which had been in a raid array, and an attempt to reformat. Basically, I went to reformat some partitions which had been in raid, and one of them threw the error andy@andy-desktop:~$ sudo mkfs.ext3 /dev/sdb5 mke2fs 1.41.11 (14-Mar-2010) /dev/sdb5 is apparently in use by the system; will not make a filesystem here! An attempt to umount revealed it was not mounted. lvdisplay and fuser did not reveal anything to me, so I just started looking around. I was graphically navigating /dev and noticed a /dev/md_d0 which did not look like /dev/md_d1 etc (it was missing a little arrow). I had not seen this notation before (my raid was md0), but figured it couldn't hurt to try stopping it.
andy@andy-desktop:~$ sudo mdadm --detail /dev/md_d0
mdadm: md device /dev/md_d0 does not appear to be active.
andy@andy-desktop:~$ sudo mdadm --stop /dev/md_d0
mdadm: stopped /dev/md_d0
After this, the partition formatted fine! I saw a lot of instructions including zeroing the partition and removing a logical volume, but the above was the only thing which worked for me! Just posted it in case it helps someone else. I know I've not been terribly technical!
i can't boot up my win XP after installing Ubuntu 10.10.
I decided to replace my Vista partition with Ubuntu 10.10 so i redo my partitions and split the current Vista partition to a swap and root partition and install Ubuntu 10.10
Everything went well and i got Ubuntu up and running. However, i realize that GRUB 2 didn't recognize my existing windows partition. I double-check on grub.cfg and see that the default os_prober didn't recognize my XP partition either.
After search on the internet for a while, i found many similar issue where most are fix when manually adding the entry yourself so i decided to add an entry 11_XP under /ect/grub.d/ for windows XP and confirm that the new entry are added to the update grub.cfg file before restarting
Code:
### BEGIN /etc/grub.d/11_XP ###
menuentry "Windows XP" {
set root=(hd0,5)
insmod chain
drivemap -s (hd0)
[Code].....
I have been having problems hibernating my windows 7 partition recently. It happened approximately right after I set up the dual boot.
I have found other topics where it says to make sure that the windows 7 partition is marked as the active partition. I have since done so and it has not changed anything. I did it with Partition Magic on Windows. I did find it suspicious though that my Dell Recovery partition is labeled as boot while the Windows one is marked as Active and System.
However when I looked at it using disk utility in Ubuntu the windows 7 partition is marked as Bootable while the recovery partition is not.
Hibernation works on Ubuntu with a couple error messages while shutting down and some weird screen issues while booting up. But it ends up working decently.
Under Disk Utility the Ubuntu Partition is not marked as Bootable. Should it be?
GNU GRUB 0.97
Ubuntu 8.04.4
2.6.24-26
Added an SSD (dev/sdc) and decided to move some less often changed directories there. Started with /usr and /boot, leaving / on a primary in the first drive, for now. All started ok, and my changed fstab mounted the right ones, and the system works.
However, grub is actually using the original /boot on / on sda1. I cannot see any way to change this. (Which makes it sorta hard to update the kernel
From grub:
Okay, since it has two choices, I tried to tell it which one to use. But, grub> root (hd2,5) does nothing.
Disk /dev/sda:
what I seem to recall, grub doesn't care about the boot flag on the disk. Nor does it care about primary vs. logical (except GNU doc says "makeactive" only works on a primary?).
The GNU doc also indicates that it looks for a directory /boot on the partition, so if you're mounting a partition as /boot, it also needs to contain a /boot directory under it. Tried that, but no change.
Is my problem the logical partition? Does that prevent "grub> root" from changing it? I'm afraid to wipe out the old /boot and find that I can't start up.
Currently I have ubuntu 10.04 LTS as the only OS.I have two partitions one for ubuntu and it is ext by default for ubuntu's files.The other is empty NTFS. (yes, it is formatted in NTFS but I haven't saved anything yet on it).The problem is: I want to install win xp sp3 on this empty ntfs partition safely (without losing ubuntu).My friend told me ubuntu will be lost even if I didn't touch its own partition.
View 5 Replies View RelatedI recently made the move from windows to Linux and I am happy to having got rid off all the MS stuff. Trying out a few distros I decided on using Ubuntu and Mandriva (wife likes the flashier stuff, what can I say ).
My question is how can I partition my hard disk in such a way that my /home is separate from both the Ubuntu and Mandriva part but accessed by both as my default home folder.
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies View Relatedhow much disk space a non manual dual boot uses? I've always been guided by a person knowing much about linux when doing my dual boot (and been guided to do the partitions manualy), but this person is not there for the moment and I need to do a dual boot on my son's computer. Since he'll need his Windows computer mainly for games I wouldn't want Ubuntu to take 2/3 of his disk space (which is about 250 Gb I think, let's say 50 Gb would be perfect for the Ubuntu)
And I'm not sure how I could change this later, cause in my own computer I cannot find how to resize (I cannot unmount neither resize the partitions I have) I don't mean I need to do this on my computer but I mean I wouldn't want to try out anything if I'm not sure it be could restored in 1,2,3. And partitions is such a thing. If I remember correctly I've done dual boot by default (i mean without doing the partitions manualy) and it does about 50/50 ?
On a certain computer, I had four primary partitions. The person who installed the Windows 7 on the computer made two partitions for the Windows (sda1 and sda2). Then I made another two primary partitions (sda3 and sda4). sda3 was empty. sda4 is an extended partition that contained the /swap, and /.According to someone else, some viruses get in on the Windows partitions and can then get over to the Linux partitions if they are primary and right after the Windows partitions, or something like that. This person suggested that I create sda3 when I install Linux(SLES 10), but to install Linux on sda4. Then later I can change sda3 to secondary.So I tried this, and the Linux installation went fine.
I decided to change sda3 before I load the application software onto the computer.So I put the GParted CD in, but to my surprise I realised that the harddisk was actually 1 TB, and not 500 GB as I thought. So I had extra space to the right of sda4. I wasn't quite sure what to do with sda3. I thought that perhaps it would be better to unallocate sda3, move the current sda4 to the left, and then make another primary partition on the right of sda4, or just stretch sda4 both ways.Anycase, I unallocated sda3, and just left sda4 as it was.Hm, perhaps you can anticipate the end of the story. I removed the GParted CD, and restarted the computer, but now the computer doesn't let me choose whether I want to boot into Linux or Windows. Um, it doesn't boot at all from the harddisk.
I know it's dangerous to play with partitions, but sometimes the job won't be done if you are too afraid of doing anything, and I dare say you won't learn anything either. There was nothing on sda3, so I didn't think it would have nasty after effects. There isn't any important data on this computer yet, it was two new installations of Windows and Linux. So I guess I could format the harddisk and just reinstall everything, but I would like to learn what goes on underneath the surface.
I have a 2 TB disk in an external SATA dock, formatted with a single ext3 (Linux) partition, which doesn't show up in the Windows 7 Computer Management->Disk Management utility, even as a raw/blank disk. I've verified that there's nothing wrong with the disk by connecting it to my Linux machine and mounting it, and I've verified that the dock is functioning properly by connecting a different FAT32-formatted disk, which mounts flawlessly as expected.I realize that I can't actually read the ext3 partition without additional software (e.g., Ext3IFS), but why doesn't the disk show up at all? Is there some sort of stupid anti-Linux filter built in? Is there any way to force Windows to recognize the disk, so that I can at the very least use direct block access with it?
Background: I want to clone an identical 2 TB disk onto this one. Due to my hardware layout, it's much easier to have the source disk attached to one machine and the destination disk connected to another, and do the clone over the network (the network is not a bottleneck with switched gigabit ethernet), than it is to hook them both up to one machine.(1) I did this once before when both machines were running Linux, but I've since upgraded the destination machine and decided to switch back to Windows for regular desktop use. I've got Cygwin installed, and have verified that the same basic method (dd + nc) will work, but I can't do anything if Windows doesn't even consider the destination disk to exist.I only have one eSATA port on each machine. Opening them up just to do this clone is a rather large annoyance. Also, since this is my backup disk, I'd like to eventually automate the cloning from the active disk to another one that I regularly swap with a third disk that I store off-site.
I was using GParted Live to resize my Windows XP partition on my desktop aaaaand... it rebooted properly and now says "no such partition" and won't boot from anything. It doesn't even recognize my dell utilities partition. I can boot to the GParted Live disk - and that is all. So I'm relatively certain that I just destroyed something
View 3 Replies View Relatedit started with rooting my Motorola Droid. I got quite interested in the whole rooting/linux "world". The only problem is, my hands move A LOT faster than my brain does. I'm an "educated novice" at best when it comes to all of this and still learning slowly, but surely. I followed an online tutorial and before I realized quite what i'd done, I had dual installed Ubuntu linux 10.10 on my laptop. ISO'd this, partitioned that and realized....i'm in way over my head. Then I started researching how to just go back in time and get my "safe" windows vista back until I'm ready to make the switch to linux and just ended up getting more confused.
How do I actually BOOT into Windows on a dual boot computer that I apparently just created? How, if need be, do I undo everything I just did in the past few hours and careless tinkering? If I decide to stay with Linux, how do I get my damn wireless router to recognize?
I have a gateway laptop that I have attempted to dual boot, but the computer only sees the Ubuntu OS and the Vista Windows Recovery Partition. (Actually, gnome reports 3 separate Ubuntu OSs... part of the problem?)
When I type fdisk -l, I get the following message code...
i wanted to dual boot lubuntu and my existing windows xp. i installed lubuntu 8.10 and everything was fine at boot. i could boot in to either then i upgraded lubuntu to 9.04 and windows was gone from grub? can i delete my lubuntu partition and windows will boot again?
View 9 Replies View RelatedI've been wanting to do this for a while and after upgrading some of my pc components I decided I would finally try to dual boot with full disk encryption on both windows 7 and Ubuntu 9.10. I managed to encrypt the windows drive with truecrypt and that worked. I installed Ubuntu 9.10 using the alternate cd and everything but /boot is in an encrypted LVM. Each OS is on a separate SATA drive the windows is on sda1 and ubuntu /boot is sdb1.
To setup the dual boot I started out following the tutorial [url] but its for XP and versions of ubuntu that use grub not grub 2. I ran dd as posted and saved the files it produced from truecrypt. I then ran into some problems with grub reinstallation so I simply reinstalled Ubuntu 9.10 from scratch again. This put grub 2 on the computer. I've managed to get it to add a Windows 7 option.
However, when the option is selected truecrypt comes up and says that the bootloader is corrupted and that I need to use the repair CD I burned before I encrypted the drive. My question is does anyone have any experience dual booting using Truecrypt on Windows 7 and LUKS/dm-crypt on Ubuntu 9.10 with grub 2? And how would I get the boot menu to work? I'd rather not reinstall but if I have to I have images from right before I encrypted so it wouldn't be the end of the world.
I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
View 2 Replies View RelatedI gave upon 11.3 M4.Tried installation by text mode but there's another screen showing various USB devices status superimposing on the Linux text install. Returned to Live installation via Live CD. Installation completed > restart >autoconfig failed. Tried live installation again but Suse kept suggesting installing into one of the empty 2 Gb partitions. Also had problems with Gparted Live 0.5.1-1 CD because somehow the keys froze. Had to replace it with 0.5.2-1. I am installing 11.2 on a laptop but right now I am stuck with frozen "Creating cache files for fontconfig". This has taken over an hour and nothing seems to be happening. I have successfully installed openSUSE 11.2 on an older laptop and a desktop. Also experienced installing Windows 7, Ubuntu and PC-BSD on both types of machines.
View 9 Replies View RelatedToday I decided to give Fedora15 a shot, mainly because of Gnome3, and so decided to install it over my Ubuntu installation. This is my partition scheme:Two NTFS partitions for Windows;
One logical partition, which inside has:
/dev/sda5 for /boot
/dev/sda6 for /
[code]...
I'm trying to install 10.04 but during the Prepare Partitions step no hard disk is listed for me to partition.
The hard disk is a Seagate SATA (7200.7) drive and my motherboard is a Gigabyte GA-MA770-UD3. The hard disk works because I just installed a fresh copy of Windows XP on it without a problem and the OS on the disk prior to this was an older version of Debian.
Does anyone know how I can get my hard disk listed so I can install 10.04?
After upgrade to Ubuntu 10.4 i can't boot windows partition. the only thing i get it's a blinking underscore after choosing it from grub. under ubuntu the window partition seams to be ok, and i can access every file.
this is my partition table:
sda1 - ntfs
sda2 - extended
sda5 - swap
sda6 - ext4 linux (0x83)
is there any tool to config grub? like yast on suse? (off the topic : is there any "grafic" version of grub?)
I'm trying to install ubuntu from a disk I got with a Ubuntu manual magazine, but once I choose the install option, the logo glows for a couple minutes then freezes and nothing happens. The same happens for running it without installation. Does anyone know what I should do? I'm currently downloading it onto a USB stick to attempt to boot it from that.
View 4 Replies View RelatedWhilst in fedora i deleted files off my second hard drive to free up some space, i deleted over 10gb worth of data. When booting back in to my windows partition it doesnt recognize the free space instead it thinks the hard drive is still full even though i deleted the data.Not to sure as to why this has happened, as im sure i have deleted stuff of this hard drive before from my linux partition.Any help would be greatly appreciated as my 70gb hard drive is full with only 20gb of data to show for it
View 2 Replies View RelatedI'm install it onto my laptop (its about 4 years old - a Sony Vaio VGN FS315E).
I have been given a live disk of the latest edition of ubuntu (10.4?) by someone at work, but my CD drive on my laptop seems to think the disk is blank. I know this is not the case as when the disk is inserted into a different laptop is it recognised as an ubuntu installation disk.
My aim to boot ubuntu from the disk to get a feel for what it's like before installing it fully on my laptop, and also to check that it would work on said laptop.
I'm an unexperiences Ubuntu user havning installed a dual boot with Windows XP and Ubuntu 9.10. However, when I'm booting my system now, the Windows option has disappeared from the menu, and the list only contains many different updates of my Ubuntu system. Can anyone try to explain me how I can retain my Windows option?I onlyuse Ubuntu for programming purposes, so skills regarding this topic is very poor
View 6 Replies View Related
